QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

Similar Messages

Recorded Audio Not playing back in Premiere Pro

I use Dxtory to record; Sound from system as well as mutual programs such as skype all playback as intended. The audio from my microphone, though it plays back when reviewing it in a media program, is not present when I import it into Premiere. Still new to all of this. Any suggestions?

Hi AkaDc,
Though it was made for Premiere Pro CS6, this video tutorial should assist you:
Hope it helps.
Thanks,
Kevin

Mpeg audio not playing back correctly

I just upgraded to CS6 and am doing my first project in it.
I have a Sony HVR-Z1U camera which i recorded HDV to and have captured this into PPro using HDV capture settings
Here is the result of the capture
File Path: V:\HC2012\Show\Untitled Clip 04.mpeg
Type: MPEG Movie
File Size: 9.5 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:51:54:21
Pixel Aspect Ratio: 1.3333
When i try and play back the clip in CS6, the video comes out ok but the audio sounds like a chirp.
If i right clip the clip and say to edit in Audition, it sounds fine
If i play the file back from Explorer in Windows Media play it looks and sounds fine
If i import the same file into CS5.5 it plays both video and audio fine.
What am i doing wrong here?

Try clearing your media cache files and see if that fixes the issue. You can do so by going up top inside premiere and going to "edit>prefrences>media then click where it says "clean" under media cache datebase. This might fix the problem.

.mpg audio not playing back...

Hi Folks! Got a little challenge for ya'll...
PPC 2.0 Dual Core with leopard. & QTpro 7.6.9
Mac Book 2.16 intel dual core running Tiger & QTpro 7.6.4
Both units have IDENTICAL FCP Studio 2 6.06. The compressor set ups/exports are exactly the same.
The only variable.... intel on tiger, and PPC on leopard.. MPG plays fine on intel with tiger, but not on PPC with leopard...
I used to be able to hear my mpg files on the ppc prior to leopard... and I did not upgrade my QT when intalling Leopard. Is this a variable anyone else has found? IS there an issue with Leopard or is this only a QT issue... I can't find a QT 7.6.9 upgrade to match these QT items to test this in stages... i also lost the use of Photoshop 7 with Leopard. This leads me to question if Leopard could be causing this audio issue as well. Just an assumption... As my Photoshop 7 works fine on Intel with Tiger as well... Clear as mud now?
When I export mpg clips in Compressor they do not show or play audio on the PPC with Leopard. I transfer them to the Intel with Tiger and they play fine... They also play back fine on my stations Ultra Nexxus playback system... Craziness abounds here... Has anyone regained their mpg and photoshop 7 with Lion? Just asking....
Any suggestions I'm not seeing? Thanks tons in advance...
Joe Stanfill
MJR VIdeo Productions

What sort of MPEG files -1,2,3 or 4? Audio or video files?
Photoshop 7 is old. Photoshop 8 (CS1) works fine on Leopard.
Photoshop 7 is entirely PPC code and will not run on Lion under any circumstances.
There's no such thing as QuckTime 7.6.9 -at least not publicly.
7.6.6 is the latest version and Tiger doesn't qualify for it.

Quicktime X will not play some Apple Mpeg 4 Movie Files

Hi,
Having a strange issue. Quicktime X will not play some of my Apple Mpeg 4 Movie files anymore.
The files open fine in Quicktime 7, but not Quicktime X.
I receive the error message "The document could not be opened. A required Codec is not available"
I have installed other codecs (Flip4Mac as well as Perian), but no luck. Have re-installed Quicktime X (10.1) and software is all up to date (running Lion 10.7.2). The movie file works fine if I import it to iTunes as well.
Called AppleCare Support and they could not come up with an solution. Does anyone here have any ideas?
Thanks!

(BTW, I just realized this was an MPEG-4 topic - my issue wasn't necessairly centered around that architecture)
Yes, I naturally assumed that you were having problems at some point with MPEG-4 Part 2 or Part 10 content.
Since I mentioned "from," I should have mentioned what the codec/wrapper was (it was captured into a .mov file using DV/NTSC via "Capture Now" in Final Cut Pro studio V7, via an analog-to-digital converter). What makes this confusing is that files captured with the same settings sometimes open right into QuickTime X with their audio/video intact, and at other times, only the audio shows up (where upon opening that same file in QT 7, we can see both audio and video). Interestingly, the problem files icon shows up on the desktop as the generic movie icon, whereas the "normal" files' icon is the first frame of the video.
May we assume at this point that the source video data is DV-25 with 16-bit Interger (Linear PCM) audio sampled at 48.0 KHz and it is the scratch MOV file that may or may not open/play correctly in QT X but always opens correctly in QT 7?
Ultimately, though, this is an unimportant point in solving my issue. Why? Well, if I can successfully open the problem files in Compressor (e.g., see/hear the video/audio), then I can theoretically re-compress (or "re-wrap?") them to whatever codec I want - ideally one 100% compatible with QuickTime X.
I took a test file, placed it into Compressor, and applied the DV/NTSC setting to it (yes, I know, the same setting the file already had). After re-encoding (which took very little time), the file was perfectly executable in QuickTime X - both Audio and video showing as to be expected, and no real difference in quality (not that VHS source is quality to begin with).
This sounds as if the "problem" file's container may be the source of the problem. As I don't know if your Compressor test is passing the data through to a new faile container, I would make an additional test here. If your version of QT 7 is keyed for pro use, I would simply use the "Save As..." File menu option to to create a new file container. In fact, I would probably just create a "reference" file rather than another "standalone" file here—a very, very fast operation—and then open the secondary file in the QT 7 "Properties" window to ensure all of the data tracks (1 video, 2 audio, and 1 timing) are present. If all looks good, I would then try opening the reference file in QT X to see it it now plays. (I.e., whether you use a reference file here or a standalone file, the object is to see if the QT X player will now recognize all contained data tracks whether resourced by reference or physically contained in/via the new wrapper.)
Could this have been answered without knowing the complete "from" specs? Probably… which is why I posted to the help forum in the first place - the goal being some other reader may have had the same issue, and had a handy solution or suggestion, saving me the time of experimentation (what forums are great for).
I don't know about you, but I would still be looking at profile/level combination settings to see if an an assumed MPEG-4/AVC video and/or AAC audio settings had been properly encoded for QT playback.
I have no doubt that there's a technical difference between the files that created this issue in the first place. But, the solution of re-compressing with an identical codec did the trick, which for this project is good enough for me.
Recompressing data is slower than rewrapping data which is slower than rereferencing the data pointers. But, if your solution works, then that is all that matters.

Quicktime.mov not playing back from website

iWeb 3.0.4
I downloaded three .MOV to my site. One is playing back ok, the other two are only displaying the QuickTime symbol. I did empty the browser cache, but to no avail. Did check with server and the .MOV files are in the html folder, but not playing back. I also re-uploaded the questionable .MOV files, but it still does not let me open the files on my site. site name : bodoholst.com
thanks in advance

All three movies play OK for me.
The pages are slow to load as this method of adding them to the pages requires the movie file to download with the web page.
If you are happy to depend on viewers having the QuickTime plugin, this is a better way...
http://www.iwebformusicians.com/Website-Movie-Video/Poster-Movie.html
So that everyone can see your movies you really need to have flash fallback since there's still a lot of people around who don't have the QT plugin installed...
http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html

Quicktime content will not play in Internet Explorer 8 or Chrome

Hi,
So I go to the apple website to watch some ads, the iMac videos and movie trailers.
I have quicktime 7.6.4 installed and working.
I have Tunes 9.0.2 installed and working.
I have Vista 64 bit home premium installed.
Internet Explorer 8. Quicktime content will not play. Neither the Mac ads, or the iMac videos or the movie trailers. I get the message "Quicktime required. Free download".
Google Chrome. Quicktime content will play the Mac ads and the movie trailers but will not play the iMac videos although it does try to load the video but fails to play it.
Firefox 3.5.5. Quicktime content will play the Mac ads and the iMac videos and the movie trailers.
Help.
Thanks

Just ran into this same problem after updating Itunes and Quicktime.
Got a Ipod Touch for Christmas, and downloaded latest version of Itunes and Quicktime and installed it without issue.
Quicktime movies (Mov) play fine, and mp3's play via Itunes, but in IE8 all I get is "QuickTime required. Free download" when I try to play movies on-line, such as trailers from the Apple Movie site.
Checked the plug-in folder for IE and all the QT files seem to be there.
I have uninstalled Itunes and Quicktime, restarted and re-installed but I get the same result.
Anyone got any clues ?

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
1) You can add component support so that QT can play the files natively or
2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

My quicktime videos will not play on my hp envy (windows 7). the computer freezes and i have to res

my quicktime videos will not play on my hp envy15 (windows 7 64). the screen goes black, freezes and i have to restart.
I have tried to open files by opening itunes or quicktime or media player. I have been able to play the videos broefly but then they typically freeze.

Uninstall Quicktime, Then reinstall it.
http://www.apple.com/quicktime/
THX

Audio not played for Motion Background

I have created a movie in my NLE as a motion background for a menu in Encore 2.0. When I preview the dvd project after rendering the audio plays fine but when I burn to dvd the audio is missing but the motion video still plays.
Why is this audio not playing on the burned dvd

In what form is the motion background when you bring it into Encore? Is it an avi? Is it compressed?
Is the audio stream a separate file?
If separate, is the audio stream a different length to the video file? Is the audio stream just a .wav file or what?

Disc I Made With iDVD Will Not Play Back in DVD Player

I used iDVD to burn DVDs I made with iMovie. The DVDs play back without problem on my home DVD player, but when I try to play them on my Mac G5, the computer keeps ejecting the discs. How can this be? Sureley the discs are compatible with my system or they would not be burnable. Please help!

Hi r
No this is an often described problem.
To make a DVD playable to as many devices as possibly there are some alt ways
to go,.
1. From iMovie to iDVD: I don't use the Share/Export to iDVD from within iMovie.
I drop my movie project icon (with a Star on it) into the open window in iDVD.
2. After done necessary adjustments I go to File/Save as a Disk Image.
3. This disk image I burn with Roxio Toast™ but You can also use Apple Disk Util tool.
4. AT AN AS SLOW speed as possibly eg x1, x2 or x4 => Less errors in burn process.
5. I use Verbatim DVD-R. There are other High Quality brands - this I use.
DVD+R or +/- RW I don't use !!
This DVD should play on nearly all devices.
Yours Bengt W

HT201272 I rented a movie from iTunes but Movist is not playing it. It says " Movist quit unexpectedly" What should I do?

Hi,
Just an hour ago I rented "Brave" from İtunes Turkey. After download has been finalized, I wanted to watch it. Unfortnately Movist says that "Movist quit unexpectedly". So I download another movist from app store and I paid also for it but this one also giving the same message. I copied some part of the details of the message below.
Could you please help me. I already spend money in order to see it.
Thanks,
Levent SECKIN
Process:         Movist [417]
Path:            /Applications/Movist.localized/Movist.app/Contents/MacOS/Movist
Identifier:      com.movist.Movist
Version:         1.2.3 (1.2.3)
App Item ID:     461788075
App External ID: 12404657
Code Type:       X86-64 (Native)
Parent Process: launchd [114]
Date/Time:       2012-12-23 19:50:54.811 +0200
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report:          2023 sec
Crashes Since Last Report:           10
Per-App Interval Since Last Report: 66 sec
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      4E941F8A-9CB7-4015-8C06-E31978567F8A
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000014
VM Regions Near 0x14:
-->
    __TEXT                 0000000100000000-00000001000e8000 [ 928K] r-x/rwx SM=COW /Applications/Movist.localized/Movist.app/Contents/MacOS/Movist
Application Specific Information:
objc[417]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libdispatch.dylib                       0x00007fff930f9b08 dispatch_release + 0
1   com.movist.Movist                       0x000000010001ae90 0x100000000 + 110224
2   com.movist.Movist                       0x000000010001ad99 0x100000000 + 109977
3   com.movist.Movist                       0x00000001000148d8 0x100000000 + 84184
4   com.movist.Movist                       0x0000000100016883 0x100000000 + 92291
5   com.apple.CoreFoundation                0x00007fff8ece370d -[NSObject performSelector:withObject:] + 61
6   com.movist.Movist                       0x00000001000178bd 0x100000000 + 96445
7   com.movist.Movist                       0x000000010001523e 0x100000000 + 86590
8   com.movist.Movist                       0x0000000100014eef 0x100000000 + 85743
9   com.movist.Movist                       0x000000010003a8ae 0x100000000 + 239790
10 libdispatch.dylib                       0x00007fff930f5a82 _dispatch_call_block_and_release + 18
11 libdispatch.dylib                       0x00007fff930f78f2 _dispatch_main_queue_callback_4CF + 308
12 com.apple.CoreFoundation                0x00007fff8ec88e7c __CFRunLoopRun + 1724
13 com.apple.CoreFoundation                0x00007fff8ec88486 CFRunLoopRunSpecific + 230
14 com.apple.HIToolbox                     0x00007fff95e002bf RunCurrentEventLoopInMode + 277
15 com.apple.HIToolbox                     0x00007fff95e0756d ReceiveNextEventCommon + 355
16 com.apple.HIToolbox                     0x00007fff95e073fa BlockUntilNextEventMatchingListInMode + 62
17 com.apple.AppKit                        0x00007fff8b8b6779 _DPSNextEvent + 659
18 com.apple.AppKit                        0x00007fff8b8b607d -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
19 com.apple.AppKit                        0x00007fff8b8b29b9 -[NSApplication run] + 470
20 com.apple.AppKit                        0x00007fff8bb2eeac NSApplicationMain + 867
21 com.movist.Movist                       0x00000001000023c4 0x100000000 + 9156
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x00007fff8d9f67e6 kevent + 10
1   libdispatch.dylib                       0x00007fff930f7786 _dispatch_mgr_invoke + 923
2   libdispatch.dylib                       0x00007fff930f6316 _dispatch_mgr_thread + 54
Thread 2:
0   libsystem_kernel.dylib                  0x00007fff8d9f5e42 __semwait_signal + 10
1   libsystem_c.dylib                       0x00007fff8b3e5dea nanosleep + 164
2   com.apple.Foundation                    0x00007fff97dc679a +[NSThread sleepForTimeInterval:] + 146
3   com.movist.Movist                       0x0000000100023b01 0x100000000 + 146177
4   com.apple.Foundation                    0x00007fff97d8a72a -[NSThread main] + 68
5   com.apple.Foundation                    0x00007fff97d8a6a2 __NSThread__main__ + 1575
6   libsystem_c.dylib                       0x00007fff8b42f8bf _pthread_start + 335
7   libsystem_c.dylib                       0x00007fff8b432b75 thread_start + 13
Thread 3:: CVDisplayLink
0   libsystem_kernel.dylib                  0x00007fff8d9f5bca __psynch_cvwait + 10
1   libsystem_c.dylib                       0x00007fff8b4332a6 _pthread_cond_wait + 890
2   com.apple.CoreVideo                     0x00007fff931b71cb CVDisplayLink::waitUn
Process:         Movist [417]
Path:            /Applications/Movist.localized/Movist.app/Contents/MacOS/Movist
Identifier:      com.movist.Movist
Version:         1.2.3 (1.2.3)
App Item ID:     461788075
App External ID: 12404657
Code Type:       X86-64 (Native)
Parent Process: launchd [114]
Date/Time:       2012-12-23 19:50:54.811 +0200
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report:          2023 sec
Crashes Since Last Report:           10
Per-App Interval Since Last Report: 66 sec
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      4E941F8A-9CB7-4015-8C06-E31978567F8A
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000014
VM Regions Near 0x14:
-->
    __TEXT                 0000000100000000-00000001000e8000 [ 928K] r-x/rwx SM=COW /Applications/Movist.localized/Movist.app/Contents/MacOS/Movist
Application Specific Information:
objc[417]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libdispatch.dylib                       0x00007fff930f9b08 dispatch_release + 0
1   com.movist.Movist                       0x000000010001ae90 0x100000000 + 110224
2   com.movist.Movist                       0x000000010001ad99 0x100000000 + 109977
3   com.movist.Movist                       0x00000001000148d8 0x100000000 + 84184
4   com.movist.Movist                       0x0000000100016883 0x100000000 + 92291
5   com.apple.CoreFoundation                0x00007fff8ece370d -[NSObject performSelector:withObject:] + 61
6   com.movist.Movist                       0x00000001000178bd 0x100000000 + 96445
7   com.movist.Movist                       0x000000010001523e 0x100000000 + 86590
8   com.movist.Movist                       0x0000000100014eef 0x100000000 + 85743
9   com.movist.Movist                       0x000000010003a8ae 0x100000000 + 239790
10 libdispatch.dylib                       0x00007fff930f5a82 _dispatch_call_block_and_release + 18
11 libdispatch.dylib                       0x00007fff930f78f2 _dispatch_main_queue_callback_4CF + 308
12 com.apple.CoreFoundation                0x00007fff8ec88e7c __CFRunLoopRun + 1724
13 com.apple.CoreFoundation                0x00007fff8ec88486 CFRunLoopRunSpecific + 230
14 com.apple.HIToolbox                     0x00007fff95e002bf RunCurrentEventLoopInMode + 277
15 com.apple.HIToolbox                     0x00007fff95e0756d ReceiveNextEventCommon + 355
16 com.apple.HIToolbox                     0x00007fff95e073fa BlockUntilNextEventMatchingListInMode + 62
17 com.apple.AppKit                        0x00007fff8b8b6779 _DPSNextEvent + 659
18 com.apple.AppKit                        0x00007fff8b8b607d -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
19 com.apple.AppKit                        0x00007fff8b8b29b9 -[NSApplication run] + 470
20 com.apple.AppKit                        0x00007fff8bb2eeac NSApplicationMain + 867
21 com.movist.Movist                       0x00000001000023c4 0x100000000 + 9156
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x00007fff8d9f67e6 kevent + 10
1   libdispatch.dylib                       0x00007fff930f7786 _dispatch_mgr_invoke + 923
2   libdispatch.dylib                       0x00007fff930f6316 _dispatch_mgr_thread + 54
Thread 2:
0   libsystem_kernel.dylib                  0x00007fff8d9f5e42 __semwait_signal + 10
1   libsystem_c.dylib                       0x00007fff8b3e5dea nanosleep + 164
2   com.apple.Foundation                    0x00007fff97dc679a +[NSThread sleepForTimeInterval:] + 146
3   com.movist.Movist                       0x0000000100023b01 0x100000000 + 146177
4   com.apple.Foundation                    0x00007fff97d8a72a -[NSThread main] + 68
5   com.apple.Foundation                    0x00007fff97d8a6a2 __NSThread__main__ + 1575
6   libsystem_c.dylib                       0x00007fff8b42f8bf _pthread_start + 335
7   libsystem_c.dylib                       0x00007fff8b432b75 thread_start + 13
Thread 3:: CVDisplayLink
0   libsystem_kernel.dylib                  0x00007fff8d9f5bca __psynch_cvwait + 10
1   libsystem_c.dylib                       0x00007fff8b4332a6 _pthread_cond_wait + 890
2   com.apple.CoreVideo                     0x00007fff931b71cb CVDisplayLink::waitUn

I know the old solution was to go into the apps folder, right click on itunes and change it to 32 bit mode. Since OSX maverics I can not run it in 32bit mode anymore so now any of the itunes movies on my mac mini will not play.

Premiere CC 2014 audio not playing

Audio not playing in some projects, either in reference mon or timeline, but plays in other projects.
Premiere CC latest
MAC 2.66 Gh i7 8GB RAM NVIDIA GeForce GT 330M 512 MB
OSX Mavericks /256GB SSD (P
1TB HD write disc

Moving to Premiere forum

HT4367 Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.

Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.

Apple TV uses iTunes. The reason you can't rent through your ATV is because you can't rent movies through iTunes Canada. Sadly, as this is a user-to-user forum, no one here would know when or if rentals will come to Canada.

I purchased a movie on itunes and it will not play on the itouch

I purchased a movie on itunes and it will not play on the itouch. it states that the "movie could not be played.
Any ideas? when I called for support, i was told I have to pay

You have posted in the itunes U forum, where colleges, universities and museums post educational content for students.
Try posting in the appropriate forum.

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

Similar Messages

Maybe you are looking for