QuickTime Movie TO Keynote presentation

I have been successful importing SD video into Keynote. Now I have 1280x720 AAC,H.264 Frame rate 29.97 Best quality multi-pass video that I want in my HD 1280x720 presentation.
It imports just fine but when it plays it is choppy. When I play it in QuickTime with Mail,Firefox,Keynote,iChat all open on an external display playing full screen it is not choppy at all.
Is there a maximum frame rate that Keynote accepts and I have exceeded it? I have tried to look at all the documentation but it is not documented. If it is will you show me where so I can reference it in the future when encoding video.
MacBook Pro 17" 2Gig ram Mac OS X (10.4.8)

You could be running into memory issues, especially if your presentation is making use of some of the 3D transition FX in Keynote. The stuttering sounds like it's not possible to keep enough of the video stashed in RAM and it needs to go back to the disk too often.
This sounds pretty unlikely considering the system you're running this on, but it's my best guess. If the videos in your Keynote don't need to be run full-screen, you may be able to encode them at a smaller frame size to optimize the processing. But I always keep everything at the 29.97 frame rate for smoothness sake.
Ric

Similar Messages

How can I export a graphic slide with a quicktime movie from Keynote?

I export a title slide with a quicktime movie from Keynote to my desktop and it plays fine with audio. Once I insert or drag the clip into iWeb the resolution is degraded and very choppy. The resolution is 320x200 and I'm exporting from Keynote as a custom size (320x200) Frame rate: 29.97 Key Frames: Automatic Key Reordering is checked Data Rate: Automatic Quality: Multi pass. I need some help.

how large is the video and if you publish - does it still have the same horrible quality?
you might considering exporting as flash (loads faster) and integrating that into your iweb site using post-editing: http://karreth.com/index.php/articles/iframes-iweb/
max

When I move my keynote presentations from my imac to my iPad they don't work

when I move my keynote presentations from my imac to my iPad they don't work
builds and movies don't work

Per your request, here's my file. Thanks for your help.
file://localhost/Users/gg/Desktop/Intonation%20Clinic.key

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remo

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil.

"The Ipad is on a short cable to my projector."
Get a longer cable?

QuickTime movie in Keynote 3 want to export Keynote as QT

So I have a Keynote presentation. It is mostly images but 3 slides play small Quicktime movies. Interviews I did on DV, converted to 320x240 using Sorenson V3 and IMA 4:1 audio. In Keynote 3.0, they now have controls. They play great.
But I need to export the presentation so others can use it without keynote.
The only option seems to be exporting it as as a Quicktime movie.
Actually, with trial and error, the Quicktimes in the Quicktime play great. BUT are missing controls!
So anyone viewing the interactive Quicktime from a CD-R has no choice but to watch each clip. Longest is 17 minutes so a pause or stop is an option that is needed.
Does anyone know how to get those QT controls (or at least stop or pause) into the movie inside the exported interactive Quicktime from Keynote?
Is there a 3rd party solution? I'm desperate.
Alternatively, if anyone knows how to do same but as a Flash file, that would be fine too.
This was problem in Keynote 2.0 as well. My presentation size is big enough.
Considering the convergence of audio and video all over Apple product line, I just don't get why this was not considered for the 3.0 update. I want to export my lectures for students to self run. I'm probably not the only university professor who shows video and would like Apple to deal with this ASAP.
G4 duo mirror Mac OS X (10.3.9)

If you have Qt Pro, you can open the file and turn on a controller, then resave the file.

Help playing my quicktime movie on keynote

I have a movie on quicktime. It plays perfectly fine when played through quicktime.
I am making a presentation using keynote. I want to make one of my slides that movie. So I do exactly as I have been reading. Ok, so the movie is now on the slide, but all I see are the little white squares around it, no actual movie. Those same white squares that you get when your trying to move or select an item for edit. Anyways, I say well maybe it will play when I play my slide show. Still no movie. Sometimes I get a blank page when I get to the slide with the movie. Other times I get the actual control panal to play the movie, but yet not movie is playing regardless of how many times I rewind, and play etc.
Can keynote play quicktime movies? If so what is the format they have to be in. The format of the movie in quick time is
Apple Animation, 983 x 552, Millions+
Please help, I really need this movie for my presentation.

In the Inspector section find the Transitions controls. For that slide, select the delay time for the same length of time of the clip.
Not sure if that will solve it but it's worth a try. That's how I got my QT clip to play.
Good luck.

Trouble playing QuickTime movie from Keynote

Hi everyone,
Keynote '09 5.1.1 (1034), QuickTime Player 10.0 (131)
I've got a Keynote presentation that I'd like to have as a movie so it can be shared. I want to utilize the "manual advance" feature that pauses the video when specified and waits for a click to advance the slideshow. But when I export (Share>Export>Quicktime), I have trouble getting the movie to play right.
Without a playback control panel (doesn't appear--and isn't supposed to I gather), after playing around with the magic mouse and keyboard, here's what I get (I can't find an explanation of keyboard shortcuts):
Just clicking the mouse plays the first slide, then stops the show at the end of that first slide. Clicking again does the same thing. It doesn't advance. The slideshow is designed to go automatically to the next slide and does so in Keynote.
Scrolling up can forward the video to the next slide or more, but then clicking just plays the first slide again and stops. Scrolling down goes backward in the same way.
Scrolling left or right while the video is playing lowers or raises the volume.
Hitting the up arrow key plays it backwards, sound and all. Hitting the down arrow plays it forwards.
Only after playing it (not just scrolling it--playing it) backwards--then forwards--will it advance to the next slide and work as I hoped it would, pausing at the right places where a click is needed to advance the movie. I found this by accident, but it works repeatedly, even after closing out QuickTime and opening the movie again.
Can someone please tell me what I'm doing wrong? I'm new to Keynote and don't use QuickTIme for much other than previewing videos. I'm hoping to share this video with many other people who aren't very computer literate, and making many similar videos. I want the other viewers to be able to play the video and just click once in a while (when the video asks them to.)
I would very much appreciate any help.

Welcome to the discussions, Christopher.
Over in the Keynote discussions we've been going over this for quite awhile. Unfortunately, there's no easy solution to your problem. I've even gone as far as attempting to preload the chapter track thinking that might solve the problem, but it doesn't work.
One thing I don't think I've tried is setting up the first slide to advance "on-click" so that there's no animation before the first transition. The problem, of course, is that there's no "loading" animation to let it know when it's ready to go.
Another thing I haven't tried but that might work is to create the movie so that it doesn't autoplay, and then, using the embed commands, set autoplay to be the full length of the movie (so that it will automatically play, but only after it's completely downloaded). Look here for the autoplay embed commands.
http://developer.apple.com/documentation/QuickTime/Conceptual/QTScriptingHTML/QTScripting_HTML_Document/chapter_1000_section3.html

Putting a quicktime movie into keynote?

When I put a quicktime movie in to keynote it shows video controls in the raw set but when I export it to an interactive quicktime movie it does not show the video controls is there any way to show the videos controls?
G5 Mac OS X (10.4.2)

EDIT: The below answer is wrong. I just read again, No, you can't do this in Keynote. Sorry!
Ohh, I think I get it. When you export as a normal movie, the controller is turned on by default. When you export an interactive movie, the standard controller is turned off. To turn this on for interactive movies, you'd have to have QuickTime Pro, open the movie, do a command-J to open the properties, go into the Presentation tab and change "Movie Controller Type" from "None Movie Controller" to "Movie Controller".

Interactive Quicktime Movie Events (Keynote)

I'm developing an AIR app that lets the user play a quicktime .mov from their computer. This movie will most likely come from an exported Keynote presentation.
In case you're not familiar, Keynote lets you export a quicktime movie that is interactive... it will automatically pause after each transition and you can click anywhere on the movie to make it continue to the next slide.
In the flash VideoDisplay component it plays right through these "pause points" instead of stopping automatically.
Is there any way to have quicktime movies automatically pause at those points? Or is there a way to at least get a callback when they're supposed to happen so that I can pause it manually with actionscript?
I know it sounds far fetched, but this would basically let you play a keynote presentation inside flash.

Welcome to the discussions, Christopher.
Over in the Keynote discussions we've been going over this for quite awhile. Unfortunately, there's no easy solution to your problem. I've even gone as far as attempting to preload the chapter track thinking that might solve the problem, but it doesn't work.
One thing I don't think I've tried is setting up the first slide to advance "on-click" so that there's no animation before the first transition. The problem, of course, is that there's no "loading" animation to let it know when it's ready to go.
Another thing I haven't tried but that might work is to create the movie so that it doesn't autoplay, and then, using the embed commands, set autoplay to be the full length of the movie (so that it will automatically play, but only after it's completely downloaded). Look here for the autoplay embed commands.
http://developer.apple.com/documentation/QuickTime/Conceptual/QTScriptingHTML/QTScripting_HTML_Document/chapter_1000_section3.html

No more alpha in exported QuickTime movie from Keynote '09

Hello
In Keynote '08, I create a slide with no background (None).
I add some text with some fancy text IN and OUT features.
I export using the Animation codec and the transparency option.
When I reimport the movie in another Keynote '08 file, it inherits the transparency of the imported file and thus everything is perfectly blended.
In Keynote '09 it is not possible anymore.
Even if I import an exported QuickTime movie from Motion with a transparent background, it is not possible to have a perfect blend, all layers are opaque.
Last but not the least, adding transparent files on top of each other in QuickTime player does not preserve transparency despite the fact that the Animation + transparency features are added in the files.
Thank you in advance.

Hey Gary - first off, thanks for your reply! I am currently forcing spotlight to re-index to see if that might help me out. After that I will try your suggestion and run a system software check.
I need a ProRes export as this is going to be combined with IMAG footage from a live presentation as well as additional video from an Arri Alexa. I want to preserve as much quality as possible so that there isn't a discrepancy in the final edit. Originally, I was rendering a small test to the desktop to gauge output quality of animations etc. I did go ahead and re-export a second time to an external drive, but it doesn't seem to matter as Keynote appears to initially render everything to the startup drive no matter what. The second export still ate about 15 gigs from my startup disk and I am unable to find any sort of temp files anywhere!
I am showing all files in Finder and searching around the ~/private/tmp folders to no avail. In the image below there appears to be a discrepancy in the size being reported by finder and the size I'm seeing listed in terminal...

Black frame in embedded quicktime movies in Keynote when exporting to quicktime movie

I've included some quicktime movies made in Photoshop in my Keynote presentation. When viewing the Keynote presentation from within keynote, the movie play perfectly. However when I export the presentation to a Quicktime move, the first or last frame of the embedded movie is black creating a flicker effect on play.
The quicktime movies have been embedded as loopable animations using the animation build in function 'Start movie' (after transition with 0 delay).
Is there a setting that will prevent the black frame on export or is this a bug?

Trim out the frames in a video editing application, Quicktime, iMovie

How to embed quicktime movie in keynote

Can I embed or insert a quicktime video within a Keynote Presentation? I was able to insert my quicktime file but only see a picture. Not able to play the movie.. Any suggestions? Thanks

The Quicktime formats Keynote will accept are:
H264
MOV
MP3
MPEG-4
AIFF
AAC

QuickTime movies in Keynote on MacBook Pro do not play

On my iMac G5, all QuickTime movies play just fine in Keynote. When I transfer Keynote presentations to my MacBook Pro, many of the movies are virtually transparent. Those same movies play just fine in QuickTime on the Intel laptop. Any sugggestions?
MacBook Pro Mac OS X (10.4.5)
iMac G5 Mac OS X (10.4.5)
iMac G5 Mac OS X (10.4.5)

Ok, open the movie in the QuickTime Player. With QuickTime as the frontmost application, hold down command and type I. What does it say is the "format" for this video?
I'm thinking it's using a codec that hasn't been made available for Intel (though once you know the format, you'll know where to look to see if it IS available).

Stream Huge, exported QT movie of Keynote Presentation?

I built a Keynote business presentation @ 1024 X 768. There's a lot of text to read and fine visual detail, so the size needs to be big. The slide presentation is 1 1/2 hours in length. The Keynote file size is 180 MB.
Due to inconsistencies with Keynote 's export functions to Quicktime, I used ScreenFlow to "capture" the Keynote presentation which I then exported as a Quicktime movie. The size of the movie, however, is *2.7 GB* -- pretty darn big... too big for Youtube.
I need to upload this and four other QT movies of about *1.3 GB* each, for streaming or downloading. Does anyone know of a web video service/site that allows one to upload, store and stream videos of extended length and large file size?
I've thought about exporting these as WMV files too, to cover all the bases, however, a friend suggested exporting the Keynote presentations as *Flash Video* because it streams more easily to both Mac & Windows platforms.
Suggestions?

Your problem is that while on a monitor, you can see the entire picture. Any DVD player connected to a standard television is going to show, at most, 90% of the image...some may only show 80%. This is due to something called Overscan on televisions. To account for this overscan, you have to make sure that as you're creating your presentation, you have nothing near the edges.
A good rule of thumb is to create an area that's 80% of the size of your presentation (in 4:3 resolutions, widescreen, you only have to worry about the right and left) and, as you're creating, keep dropping this shape onto your presentation slides to make sure you're inside it. Then, you'll be pretty sure that even on the worst televisions, all you information will show.

Saving Quicktime Movies in Keynote

I'm using a 1GZ Power PC G4, with 768 ram, Keynote 3.02. When I insert a Quicktime movie into a Keynote theme (however short), it plays fine, but when I try to save it, Keynote crashes -- everytime! Any suggestions will be most appreciated.
NP
iMac G4 Mac OS X (10.4.6)

You can have two movies playing simultaneously, either side by side or one on top of the other.

QuickTime Movie TO Keynote presentation

Similar Messages

Maybe you are looking for