Quicktime movie trailer audio problems

I have downloaded a few HD 720 trailers to use in a custom movie intro. The problem is, when ever I try to play them back, I have no audio at all. I have tryed using several different programs, like Roxio Media Creator 9, Ulead Video Studio Plus 11.5 and Vegas Video Pro 8. Each program has the same results, no audio.
About a year ago, I was able to save the trailers and insert them into my program and everything worked just fine.
Has anybody had this problem or now of a fix to my problem.
Thanks for any help you can give.
Mike

I have same problems
and no answers (((((
Let me know if you'll find how
to flowkeeper (at) gmail . com

Similar Messages

  • Quicktime Movie Trailers-Podcast problems

    I am having problems when selecting movie trailers from the QuickTime movie trailer list for the iPod. iTunes is opening ok and the trailer is appearing in the podcast list but is not downloading.
    All that appears is a name with a ! mark on the left hand side. So in summary when the trailer is downloaded it appears as an entry but with a ! symbol. When I click on the ! mark it mentions something about the URL not being a valid podcast URL.
    Any ideas? Can someone see if they experience the same problem?

    I have same problems
    and no answers (((((
    Let me know if you'll find how
    to flowkeeper (at) gmail . com

  • Export as QuickTime Movie - lose audio sync

    I have a 10 minute project that basically is a sequence of 10 nested sequences. It is an HDV project. I need to export it as a QuickTime Movie to maintain the ability to show it in HD. When I do so (using Export->QuickTime Movie - I am not using "Using QuickTime Conversion"), I maintain "Current Settings". The resulting .mov file, when played back in QuickTime Player (or anything else) has a progressively severe loss of audio sync. This is not present when playing the project within the timeline in FCP (6.0.3).
    I have tried opening the project on a different computer with a virgin version of FCP 6.0.3, with the same results. I also made sure to render the individual sequences as well as the master sequence. I created a new sequence and added the individual chapters again, with the same result. I tried using the Media Manager to bring the project over to another computer - same problem. I also took this to an Apple One-to-One class with a FCP expert who couldn't figure it out either.
    I could really use some help here.

    First of all, thank you for responding.
    I don't have a capture delay. The audio rate is 48 khz.
    Interestingly, I had previously tried the separate export and stitching you suggested, but a strange thing occurred. If the resulting quicktime movie was created through a Save As... command, you wind up with a self-contained movie. When I did that, I started to get weird audio repetitions or dropouts as the movie went on. On the other hand, if I left it a reference movie, this didn't happen.
    Anyway, this is a workaround, but it means that the whole thing has to be done over every time I make any change at all, and I am also concerned about getting rid of this problem for the future.
    Any other thoughts?

  • Quicktime Movies - The audio plays but the video is completely messed up

    Hi.
    I have QuickTime V7.2 and my OS is XP.
    All of a sudden QuickTime started playing back QuickTime movies with no video - there is just a lot of flickering green and purple - however the audio is there. Oddly, the files used to play fine. They were made on my PC as QuickTime movie files. The sound is there. (Additionally the files play ok in Realplayer.)
    I've searched techy support but can't find an answer. Any ideas what is wrong?
    I made the files on movie editing software called ULead, and as I said, they used to play fine.
    Thanks very much.
    Gary

    A very similar and, I suspect, related problem. I created .mov files on my Mac, they play fine on the Mac, the audio plays but flickering video on my PC. I suspect it has something to do with the codecs used. Anyone have an idea as to how to make them compatible?

  • Mplayer quicktime mov no audio

    I'm trying to play some quicktime .mov files and I keep getting this:
    Requested audio codec family [qclp] (afm=qtaudio) not available.
    Enable it at compilation.
    Cannot find codec for audio format 0x706C6351.
    So I tried to build mplayer from ABS and added --enable-qtx (as per ./configure --help) to the PKGBUILD, but that causes the build to fail giving this:
    libmpcodecs/libmpcodecs.a(ad_qtaudio.o): In function `preinit':
    ad_qtaudio.c:(.text+0x23a): undefined reference to `LoadLibraryA'
    ad_qtaudio.c:(.text+0x252): undefined reference to `LoadLibraryA'
    ad_qtaudio.c:(.text+0x26c): undefined reference to `GetProcAddress'
    ad_qtaudio.c:(.text+0x28c): undefined reference to `GetProcAddress'
    ad_qtaudio.c:(.text+0x2ac): undefined reference to `GetProcAddress'
    ad_qtaudio.c:(.text+0x2cc): undefined reference to `GetProcAddress'
    ad_qtaudio.c:(.text+0x2ec): undefined reference to `GetProcAddress'
    libmpcodecs/libmpcodecs.a(ad_qtaudio.o):ad_qtaudio.c:(.text+0x30c): more undefined references to `GetProcAddress' follow
    libmpcodecs/libmpcodecs.a(vd_qtvideo.o): In function `init':
    vd_qtvideo.c:(.text+0x4b4): undefined reference to `LoadLibraryA'
    vd_qtvideo.c:(.text+0x4cc): undefined reference to `LoadLibraryA'
    vd_qtvideo.c:(.text+0x4e6): undefined reference to `GetProcAddress'
    vd_qtvideo.c:(.text+0x4fd): undefined reference to `GetProcAddress'
    vd_qtvideo.c:(.text+0x514): undefined reference to `GetProcAddress'
    vd_qtvideo.c:(.text+0x52b): undefined reference to `GetProcAddress'
    vd_qtvideo.c:(.text+0x542): undefined reference to `GetProcAddress'
    libmpcodecs/libmpcodecs.a(vd_qtvideo.o):vd_qtvideo.c:(.text+0x559): more undefined references to `GetProcAddress' follow
    collect2: ld returned 1 exit status
    make: *** [mencoder] Error 1
    make: *** Waiting for unfinished jobs....
    ==> ERROR: Build Failed.
    Aborting...
    So I made sure that I had community/libquicktime and the codecs packages installed but I'm not sure what else to do...
    it appears im missing some kind of quicktime header file and/or codec.
    Any ideas?
    Last edited by Evanlec (2008-05-11 16:00:42)

    Okay, well, that may have helped with another issue, but my build still failed giving about the same errors:
    libmpcodecs/libmpcodecs.a(ad_qtaudio.o): In function `preinit':
    ad_qtaudio.c:(.text+0x23a): undefined reference to `LoadLibraryA'
    ad_qtaudio.c:(.text+0x252): undefined reference to `LoadLibraryA'
    ad_qtaudio.c:(.text+0x26c): undefined reference to `GetProcAddress'
    ad_qtaudio.c:(.text+0x28c): undefined reference to `GetProcAddress'
    ad_qtaudio.c:(.text+0x2ac): undefined reference to `GetProcAddress'
    ad_qtaudio.c:(.text+0x2cc): undefined reference to `GetProcAddress'
    ad_qtaudio.c:(.text+0x2ec): undefined reference to `GetProcAddress'
    libmpcodecs/libmpcodecs.a(ad_qtaudio.o):ad_qtaudio.c:(.text+0x30c): more undefined references to `GetProcAddress' follow
    libmpcodecs/libmpcodecs.a(vd_qtvideo.o): In function `init':
    vd_qtvideo.c:(.text+0x4b4): undefined reference to `LoadLibraryA'
    vd_qtvideo.c:(.text+0x4cc): undefined reference to `LoadLibraryA'
    vd_qtvideo.c:(.text+0x4e6): undefined reference to `GetProcAddress'
    vd_qtvideo.c:(.text+0x4fd): undefined reference to `GetProcAddress'
    vd_qtvideo.c:(.text+0x514): undefined reference to `GetProcAddress'
    vd_qtvideo.c:(.text+0x52b): undefined reference to `GetProcAddress'
    vd_qtvideo.c:(.text+0x542): undefined reference to `GetProcAddress'
    libmpcodecs/libmpcodecs.a(vd_qtvideo.o):vd_qtvideo.c:(.text+0x559): more undefined references to `GetProcAddress' follow
    collect2: ld returned 1 exit status
    make: *** [mplayer] Error 1
    ==> ERROR: Build Failed.
    Aborting...

  • Exporting Keynote to Quicktime movie with audio

    I am struggling to get this to work although I have done so previously. I have a fully functioning keynote with an embedded quicktime movie and an audio file. The Keynote works fine.
    When I try to export it I just get the audio file!! I am opting for 'manual' even thought the Keynote is a looped production without the need for any manual input.
    Any ideas? thanks

    Exporting to Quicktime with sound seems to have been restored ok in Keynote 09 as I have just tested it on the trial download copy. Up until then I have been importing into Garage Band without sound and adding it there which is successful but I think the quality of picture is better with only one step i.e within Keynote itself.

  • Firefox 5.01 will play QuickTime movie and audio clips once, but then will not be able to repeat the movie or audio clip again after it initially plays. This did not happen in earlier versions of Firefox before 5. Is there a fix?

    I am on a Mac using system 10.6.

    Thanks for your response. While this may work with audio and video originating from your own computer it doesn't seem to effect audio and video viewed from the Firefox 5.01 browser which uses a QuickTime plugin. Audio and Video viewed from Safari and Firefox 3.6.19 work fine which leads me to believe the QT plugin and Firefox 5 browser are not working correctly.

  • Movie and audio problems on the classic

    I just bought my first Ipod (a 160gb classic). I had a couple movies and a lot of music videos already on my hard drive, all of which I legally own. Some transferred to Itunes and some did not. My first question is how do I get the ones that didn't transfer to do so.
    Secondly, of the ones in i-tunes almost all would not transfer to the ipod. (The message would read "this item was not copied because the audio format/file type is not supported by the Ipod 'administrator's ipod'"). I hit the "Advanced" and "Convert Selection for Ipod" options. Some transferred to my ipod okay while others still will not transfer, even though they were allegedly synced. Why?
    And thirdly, of the ones that did transfer to my ipod, some are fine without any problems. But with others the video works okay but there is no audio. How do I fix that?
    Any help that can be provided would be GREATLY appreciated.

    And thirdly, of the ones that did transfer to my ipod, some are fine without any problems. But with others the video works okay but there is no audio. How do I fix that?
    Quicktime or Quicktime Pro (both of which iTunes uses) does not convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • Exporting Quicktime .mov with audio

    I searched for a solution to my problem for a while and haven't found any so I felt I'd finally ask.
    I am exporting a movie in Premiere Pro 2.0 as a .mov.  Yet everytime I export the audio quality is awful. The audio plays fine within premiere, and the video exports perfectly.  I've tried uncompressed audio, and the result is a loud static sound.  I've tried multiple compressors (oblivious to which I should be using) none of which offered good results (sometimes it was even silent).  What settings should I be using?  (By the way, the audio in the scene is .mp3 and .wav, but I felt using the uncompressed setting would be find since I wouldn't be recompressing the audio)
    I'm sure this is a very basic issue that has been addressed multiple times, but I couldn't find a thread or resource on the internet that helped with this issue I'm having. Thank you for any help you can offer, I appreciate it.

    I use the same settings, as you, with one exception - instead of 8-bit, choose 16-bit for the Sample Depth.
    I also dislike using MP3 as a source. With the exception of tiny SFX files, I always convert these to PCM/WAV (Uncompressed) 48KHz 16-bit, before Import. That does NOT restore all the data lost with the MP3 compression (I hate the sound with MP3, but that's a different topic), but it gives me the best source to edit. I use Adobe Audition, but the free Audacity does a great job of this.
    Hope that the 16-bit does the trick for you.
    Good luck,
    Hunt
    BTW - what are you using to play the resulting MOV?

  • Movie trailer streaming problem

    When i first set up the Apple TV two weeks ago, i had no problem watching movie trailers. The trailers (in HD) would start almost immediately after selecting them. However, since then, it is next to impossible to watch one. After choosing a trailer, the loading bar would just would a tiny bit and then it would just sit there. Updating to the latest Apple TV firmware did not help. I can watch Netflix instant play movie with no issue.
    I have a feeling Apple does not have enough capacity to support all these streaming. I know for a fact that my broadband is not the issue, as seen in the speedtest.net test result below (49Mbps download and 3.5Mbps upload):
    http://www.speedtest.net/result/1071383363.png

    Try a restore if you haven't already.

  • Movies and Audio Problem - PLEASE HELP!!!!!

    Hi,
    If I am working on the music for a movie file i sometimes open a new project with no global tracks, so as i can focus on the music, when i then choose to open the movie and see what the music sounds like with the movie all is fine..... until i stop the movie. If the movie is not playing or doesnt have the volume slider raised high (on the movie window), no sound is heard when i press a key on my midi keyboard. This means i can only come up with ideas when the movie is playing. If i close the movie and/or the global tracks, the problem remains the same. I have to close logic an reopen it in order for me to hear any sounds (audio tracks and midi). Any advice or help would be great as this is really frustrating me. Thanks, Ben

    I use Logic Plug ins and Korg/Steinberg plug ins. I have a multi instrument set up in my environment for an external Korg Trinity Keyboard. It is no longer connected as it was too difficult to control program changes etc and recording in audio takes too long for me. This many be the problem??? Maybe i could remove the multi and see if this helps. I am thinking of re-connecting the Korg to my computer but am not sure if it will cause more problems. Any advice? Thanks... Ben

  • I movie exporting audio problems

    I just worked for months on 45 min movie and the same problem. And the answer is WHAT?? whats the piont of using beat markers and the ability to use all these things inside imovie only to find you cant export it really. and now i have to WHAT??????? go back and try to re edit the speeds? The whole movie is adjusted speed, to backround music, sound etc. I switched to an Apple only to find out what a BIG mistake. I cannot believe this has not been fixed. What a joke! I have to get this DVD in the hands of someone by the end of the weekend that might be able to change my life i am completly devestated. There must be an anwer to this?

    Hi Eric,
    When you converted your Garageband loops, did you export to AIFF? And was it AIFF, 16bit, 48KHz? Check your files, I'll bet they're 44.1KHz. That could be the cause of your random dropouts on playback, as FCE would have to resample on the fly to play back the audio in real time. When the load on the processor gets too great, you get dropped frames.
    When you say they work fine in other projects, do you mean other FCE projects or other Garageband or other application projects?
    What else can you tell us about your system - what model iMac is it, what is the processor speed, etc. What version of QT do you have? Are your external HDs daisychained? Do you have ANY other programs running at the same time you are working with FCE?

  • FCP 6 - Exporting Quicktime MOV distorts audio (clipping), plays fine in FC

    I've just finished a project and have exported my finished video to a Quicktime file, using the same settings as my original capture (HDV 1080i50). However, when I do so, the audio in the exported file is clipped quite horribly, and makes it hard to make sense of what is going on because of it.
    I have several sound files that have been amplified +9dB in the project, and was originally worried about clipping, but they play back absolutely fine in Final Cut, with no distortion at all.
    Any ideas on how to remove this clipping on export? If I have to reduce the sound level on my clips, is there a way to do it via batch? I've got heaps of keyframes controlling volume, it would be an absolute pain to do manually.

    Keep your audio peaks between -12 and -6 inside FCP. Never, ever clip the audio. Use of some compression and/or limiting - if done correctly - will help you control your levels: Putting a lid on loud stuff and bringing up the level of low stuff. And does a better job of level control than manually riding-gain with a fader or inserting audio level keyframes.
    Compressors will help you.
    Search the web for tutorials on how to use 'em and you'll never look back.
    John

  • Quicktime movie w/ audio track from iTunes cannot convert to mpeg4

    Ok so i have a movie in Quicktime Pro 7 and i opened a track from iTunes and added it to my movie. Now, i cannot Export the movie into an Mpeg4. Why? This is really annoying and I've been trying to figure it out for a while. Any help would be really appreciated. Thanks

    Music purchased from iTunes is protected and can't be exported to other formats.

  • Record quicktime movie without audio track?

    There are many posts out there trying to troubleshooting when there is no audio during quicktime recording, but there are some scenarios that I would like to do recording without audio track at all. What is the best way to achieve this besides muting my microphone? Thanks!

    Music purchased from iTunes is protected and can't be exported to other formats.

Maybe you are looking for