Quicktime playback all jerky after update

The last quicktime update has turned my playback all jerky. I can't even play a normal DV cam video with more then about 4 ot 5 fps. The playback info window however doesn't appear to notice and says the playback is fine at 25 fps as it should be.
Since I'm working in the video industry, it is vital for me that quicktime playback. And I work with HDV videos, which have been playing absolutely fine. And now, they play with 1 frame every 3 seconds. I've tried a reinstall of Quicktime, I even completely setup a new system install. Same result.

Please report this
http://www.apple.com/quicktime/feedback
This has happened once before (some time ago) and was fixed. But every one should complain since intel Mac get all of Apple's attention now.
Also, reverting to a previous version with pacifist does work but then you cannot video conference in ichat and who knows what else!

Similar Messages

Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
System Manufacturer    Intel Corporation
System Model    S5520SC
System Type    x64-based PC
Video    NVIDIA Quadro FX 4800 driver v.320.78
Display        Dell 27" LCD (DisplayPort)
Display        Dell 27" LCD (DisplayPort)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM)    96.0 GB
Page File Space    0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.

I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace

I lost all apps after updating to iOS7.1 How do I get them back?

After updating my iphone4s with iOS7.1 I lost all my apps. How do I get them back?

All your apps should be in your itunes media library, sync your phone to itunes.
Or directly from your phone - app store - update - purchase - all or not on this phone - hit the cloud next to the app you want to download.

Lost all contact after updating

I lost all my contact after updating my phone and can;t get them back. I did sync mu phone and also improt sims contact and still nothing. What do I do??

Do you regularly back up your phone with iCloud or iTunes on your computer?
Do you sync contacts with a cloud service or app on your computer?

IPhone wont sync all photos after updating to 4.2

Hi,
I just recently tried to update to 4.2 and before I did this I backed up my phone, like I always do. I then downloaded and installed the firmware. When it started back up, there was no music and it said I had to rebuild my photo library before opening photos app. I did and when it was finished it only showed 800 pictures out of my original 1500+. I then searched for my backup I created before but the only one there was the backup it just created.... I don't know how to get my pictures back now. please help

Are you saying you had 1500+ pictures in your camera roll? If not, then the pictures should be in the folder on the computer you sync with. All you have to do is resync the phone. If they were pictures in the camera roll, you see why it is important to import the pictures to the computer as soon as you can to ensure you have them. The backup for the iPhone is not that much of a guarantee. I wouldn't know why the phone would have backed up a second time after updating the software, but if it did, it overrights the last backup, unless it was a restore backup.

AirPlay not working in all devices after update

Hi,
Anyone else having problem using AirPlay? After my apple tv was updated, all my devices (MacBook-OSX, iPhone-iOS8) cannot connect to apple tv. Remote also not working.

Hello acid4382,
The article linked below details a number of troubleshooting steps that can help resolve issues with AirPlay.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

Iphone 4 Lost all Data after updating

Hi there..
i got headache reading everywhere to find a solution to my problem, and didn't find any useful tips so far, i haven't slept for the past 24 hours because of this..
last day i did an update to my itunes to the latest version, and upgraded my iphone, while doing that my iphone got an error that it couldn't be updated and got stuck on recovery mode, and itunes asked me to do a restore to factory sitting, which i did, but in the last few seconds it just shows an error message that it cant update, and i get error 10, so i did what the manual said and tried using another computer which fortunately worked..
so i return to my first computer and tried to restore my backup files, and then i faced another problem, there was not enough space on my hard drive, i kept moving files away, deleting others and trying again, and every time i try, it takes up more space and i end up with few Kb on the drive.. i didn't know what to do, and got confused i think i click on back up instead of sync at some point, and when i realized that i hurried and unplugged the USP from the iphone, and in that moment a 3GB worth of data disappeared from my hard drive (i think it was the data the ituens kept creating while restoring back up) and a new back up worth 5mb was created on my back up folder..
now what i have on my iphone are my contact list, and my notes ..
what i don't have is 6 months worth of pictures and videos taken from the iphone, and my apps that are worth around $40 - $50
i read that iphone sync your data before doing a full restore, and i found 3 files on my back up folder one is 902 mb, secound 1.06GB and the third is 508 MB the first two dating today's date on 8:03 AM, the last one is also today on 6:33 AM which was the time i unplugged my USP from my iphone (i think)
i'v downloaded a program called "iPhone Backup Extractor" and saw that these folders contain all contacts, 300+ calender stuff and some messages (which i totally don't care for)but the photos and videos are marked None T_T
the question i'm asking is, how can i restore those lost pictures and videos, since they are very important to me, and how can i get my apps back?? i'v tried going to app store and downloading Whatsapp which i bought before, but now it asks me to pay again
i have some apps that is worth $5 and $10 each, i wouldn't mind paying for $.99 app again, but i can't pay more for an already paid app for that much yet again!!
by the way I have a windows Xp which i'm using, the restore worked on a windows 7 laptop
Plz help me, i'm starting to have a stomachache because all of this other than my headache T_T
Message was edited by: Hschi

so i was playing around seeing if i can get the apps back, and after going through the payment process it recognized that i'v bought this already, so i was able to download my stuff back.. (should have figured this out already, since it was an online transaction)
Still want to recover my camera roll, and i was wondering if chat logs could be recovered too, such as for the whatsapp???

Playlist not playing all videos after update

I updated to 5.1, and my video playlists are no longer working correctly. It will play the first video, then stop and the screen saver will turn on. If I try to restart the video, I get the spinning circle that never goes away. If I close iTunes and re-open it, I can start the video again, but it will again stop after the first one. Everything was working fine until the last update to 5.1.
Any idea how I can either fix this, or go back to before the last update?
Thanks in advance!

OK, so the second macs library is visible from the tv, you can navigate the videos in that library but when you try to play a video it won't. I'm still not clear whether this is all videos or just some, but meantime try this.
From itunes select a troublesome video, choose file/show in finder and note the location of the original file.
From itunes (not the finder) delete the file and choose keep files when prompted.
Drag the original file from the finder back into itunes.
Does this help.

GB, Itunes & Quicktime Won't Launch after update

Hi,
In desperate need for help. I just did some software updates on Garageband, iTunes and Quicktime on my G4 OS 10.3.9. Upon launching each, none of them are launching now. Help!!!!!

Apperently, after trying different methods, I removed GB, iTunes and Quicktime from my CoreAudio Setup and now everything works. I was using Digi002 as a midi interface and monitoring. Everything used to work with that setup until I did a recent upgrade of Quicktime. I do think that something was changed in my computer when quicktime was upgraded.

My library in iTunes all gone after updated to iTunes 12.0.1.26

I used to located my music library to my external hardest (seagate backup plus). After I updated new version of iTunes (along with OS X Yosemite), all the music library all gone.
By the way, it happen with MacBook Air mid-2013 13"

You said you did a backup...
iCloud backup or iTunes backup?
Also, two suggestions for next time:
Software updates can be done right from your device, under Settings > General > Software Update if you have iOS 5 or later. This usually prevents a lot of problems users typically run in to when updating in iTunes.
When updating in iTunes, even though your restore may seem complete, it is still restoring your apps, music, etc. Please be sure that it is absolutely complete before unplugging.

Playlists are all lost after Updating iTunes

About a week ago I updated my iTunes to the latest version and after my iTunes didn't recognize any of my songs and playlists that I had in my iTunes everything is fine on my iPhone still but all of my playlists are wiped on my iMac. My iTunes doesn't even find my Purchased songs which I had before as well. Help me!

all of the links there are just saying that I should go at the purchased list /tab and redownload it... but the ringtone i bought before is not on my latest purchased list .. thats my problem i dont know why .

Lost all contacts after updating to ios 8.2

I updated my phone to the new ios 8.2 and after installing the update my contacts were gone. I didn't have them backed up to icloud. How do I get them back?

If you did a clean install then you have to manually import contacts from the sim. Try this guide to import sim contacts easily on ios 8.
OR
Try going into settings ---> Mail,Contacts,Calendars ---> Import SIM Contacts.

Lost all signal after updating to IOS 7.1

I have an iphone 4s and Tesco sim. No previous problems at all and had kept the phone updated, until about 5 days ago when I updated to IOS 7.1, since when I have lost all my network coverage. It constantly shows 'Searching' or sometimes 'No Service'. I can't make or receive any calls or SMS which is hugely frustrating - though the rest of the phone is working fine and I can still imessage using the internet. It's not a problem with the provider (I have a work phone on the same network which is working fine) and it isn't the sim card, which I had changed incase that was the problem. I've tried all the tips I can see on here - putting flight mode on, turning phone on/off, turning 3g on/off, turning automatic carrier on/off, reset network setting, even did a factory reset today - all to no avail.
If anyone can help I would be very grateful. Seems very unfair that I should lose the basic use of my phone for updating?

Is your iPhone restricted? Check Settings > General > Restrictions

Problems with all applications after update new OS update 3.1.2

Hi,
I updated my IPHONE OS today in the afternoon. I am having IPHONE 3G 8GB.
Before updation all the apps was working fine now all gone I dont what to do next. I took the back up for the phone but I dont know where it kept the backup file. I am using Windows XP Pro. for personal use.
Is there some one who can explain what happen to my phone OS, any application if I click it fails to start. I am planning to restore the last backup which I took before updating it.
I dont want to reset or to install new OS in it. Because I have lots of new contacts which I stored in my phone and also lots of the SMS which I need to keep it.
So please some one help me to restore it to previous state.
Any reply will be appriciated...Thanks in advance

hey,
what you need to do to get the applications to work is to delete on app on the iphone then once you delete it hard reset the iphone by holding the home button and the power button until you see the apple logo. once the iphone comes back on go directly to the app store and redownload that app. then once it is downloaded they all should start working.

Lost all contacts after update 7.1.2

I updated my wives iPhone 4s to 7.1.2. I have lost all her contacts and all notes and all photo's. I have tried to recover from iCloud but cannot seem to find it on iCloud or my computer.....***????

Restore from your last backup file.

Quicktime playback all jerky after update

Similar Messages

Maybe you are looking for