Quicktime pro and flip 4 mac

Every time I try to export a movie in QuickTime (Pro), in various formants, Flip 4 Mac comes up and says it will put a watermark on the movie unless I buy the Flip4Mac pro.
Thanks

If your source file is in WMP format or your export option is to WMP formats then you are working using the "trial mode" of the Flip4Mac software.
You must purchase one of the upgrades to that third party software to complete your task.

Similar Messages

  • HT2240 If I already have the unlock key for Quicktime pro on my Mac , does Apple gouge me for the full price to get the key to open quicktime Pro on my windows laptop ?

    If I already have the unlock key for Quicktime pro on my Mac , does Apple gouge me for the full price to get the key to open quicktime Pro on my windows laptop ?

    Here is an excerpt from the license agreement:
    2. Permitted License Uses and Restrictions. This License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple computers at the same time.
    You can download the entire SLA here:
    http://www.apple.com/legal/sla/
    So, it appears that you will need to purchase another copy of it if you want to install it on another computer.

  • I just bought quicktime pro and can't get it to show up in my system preferences.

    i just bought quicktime pro and can't get it to show up in my system preferences. Any ideas?

    Welcome to the Apple Support Communities
    QuickTime only appears on System Preferences if you are running Mac OS X Leopard, and you have OS X Mountain Lion.
    In Mac OS X Snow Leopard and newer, QuickTime Player 7 isn't included, so you have to install it before getting QuickTime 7 Pro > http://support.apple.com/kb/ht3678
    After installing QuickTime Player 7, you have to activate it in order to get QuickTime 7 Pro. In that link, follow the steps under "Information for QuickTime 7 Pro users"

  • I have recently bought quicktime pro and the installation instructions tell me to go to utilities then to quicktime pro icon. But I don't have a quicktime icon at all in my utilities. Help?

    I have recently bought quicktime pro and the installation instructions tell me to go to utilities then to quicktime pro icon. But I don't have a quicktime icon at all in my utilities. Help?

    QuickTime Player 7 for Mac OS X v10.6.3 or later
    You need to install version 7 to add the registration info.

  • I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    Did you remove Quicktime X?
    On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
    You will need to reinstall OS X to get Quicktime X back if you have deleted it.
    I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

  • I bought QuickTime Pro, and have QuickTime 7.1, but QTP won't run...

    I bought QuickTime Pro, and have QuickTime 7.1. I have already registered QuickTime Pro, but when I try to use it, my computer just says I have QT 7.1 installed. I can't use and of the features of QTP. I followed the installation directions, but I must be missing a step because my computer has no clue that I own QTP! (Also, when I try to Export a video, it says that I need to install QuickTime Pro, which I've already installed...)

    Have you attempted to re-enter your registration information? Or does it not allow you to do this?
    Secondly, have you tried uninstalling Quicktime, then reinstalling it via the Control Panel or QuickTime Start Menu Group?

  • HT1338 Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

    Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

    You may be able to download it fom here:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Quicktime Pro and getting videos off the web

    I am bound and determined to get videos off the web and use them to make my own videos and what not. I was wondering if quicktime pro is the best program to use for my project. I have downloaded other programs that don't work and I am sick of the hassle. If there is a sure thing program anyone knows about, I'd love to know. Otherwise, it would be great to hear about quicktime pro and it's adeptness or otherwise at successfully getting videos off the web.

    Okay I figured out how to do that, but once it is downloaded, I am still having trouble. I don't know which application to use to open the file. Quicktime won't open it because it says it's not a movie file. I downloaded a standalone player and that couldn't open it either. What do I do?

  • Hello there iv got an mac book pro and running mac os x 10.5.8

    hello there iv got an mac book pro and running mac os x 10.5.8 and want to upgrade what can i upgrade to snow leapard

    All MBPs 2011 and earlier can have Snow Leopard installed (Late 2011 requires a bit of shoehorning).
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Ciao.

  • Quicktime Pro and WIndows Vista

    Hi.
    I just bought Quicktime Pro, and was looking for ways to upgrade my quicktime. I tried to follow the online instructions.
    Except that the Online instructions don't work for Windows Vista, because the instructions are set for XP. I know this because there is no Quicktime Control Panel in my computer's Control Panel. Unless I'm doing something wrong, which I might be.
    However, the issue is driving me up the wall and I'd really appreciate some help in getting to actually input the registration code SOMEWHERE.
    Thank you.

    QuickTime 7 Pro is activated by downloading the QuickTime 7 software from the Apple website. What you actually paid for is the registration to unlock the Pro features within QuickTime. What you should do is:
    1) download the latest version of QuickTime 7 and install in on your machine.
    2) there should be an icon in the Control Panel for both Vista + XP called "QuickTime" (if u don't see it, switch the Control Panel to Classic View located on the left hand tasks
    - OR -
    Open QuickTime 7 directly and click *Edit > Preferences > Register*
    3) enter your necessary registration info then click OK/Apply
    When it has updated, you can choose to update the software from *Help > Update Existing Software*
    Lk

  • I have purchased Quicktime Pro and entered the registration key but does not operate.  Apple does not have a support tab for this so I'd appreciate any help.  I have Windows 7 Home.

    I have purchased Quicktime Pro and entered the registration code.  It indicates at it has been installed, but it does not run.  Any suggestions? 

    The trim to selection function is available and it appears to be working.  For now, I seem to be operable as Pro even though the header doesn't say so. Thanks.

  • Quicktime Pro and JVC .Tod files

    I have a JVC Everio and I edit my videos on my Macbook using Quicktime Pro and Final Cut Express HD 3.5. In order to have my videos work on FCE, I need to convert (as many of you may know already). I havent had a problem doing so and lately Ive only been editing 3-5 min clips and quality isnt that much of an importance to me for those small clips as they are only for testing purposes. My question now is, if I want a long (1hr-2hr) video with a nice, clear, HD picture from my .tod files (CBR 1440x1080), what format should I use in Quicktime Pro, to convert the video from a clear .tod file, to a clear "" file??? Any help would be appreciated!!! Thanks!!

    Just thought I help out with the JVC community who's having the same problem I faced for months. They have actually now released new plugin that works with QT 7.4.x
    I just got mail from JVC's escalation agent after months of mail ping-pong. I guess that appropriately make him E-Mail Specialist. You can download the latest Quicktime plugin for version 7.4.x on this URL
    http://www2.cli.co.jp/products/ne/updateqtc_for_gzhd7/qtc3eupdate.htm
    I just hope Apple does not release security update and release v7.5.x anytime soon. But that should be JVC's responsibility to keep its customers well updated with its TOD format conversions.
    Finally now we can update to QT v7.4.x!! Good luck. And spread the word.
    PS: I have yet to see an update on JVC's website about this new plugin release. But I cab confirm that its already lost lots of OSX Everio HD camcorder users.

  • Hello i just bought quicktime pro and the application doesnt open ( im on windows 7) tank you

    hello i just bought quicktime pro and the application doesnt open ( im on windows 7) tank you

    hello thanks for helping i found where the problem was coming from but no how to resolve it. it sems like the AC3 format of avi video is in conflict with quicktime pro or something like that..
    i tried to take some codec for avi video but none of them resolved the problem if somebody has any answers thank you very much.

  • HT4906 I have a MAC PRO and a MAC AIR all dedicated to the same I cloud/Itunes account. i purchased i photo on the air but can i install it on the PRO free as i have already paid for it on my account?

    I have a MAC PRO and a MAC AIR all dedicated to the same I cloud/Itunes account. i purchased i photo on the air but can i install it on the PRO free as i have already paid for it on my account?

    Yes if your system  minimum reguirements for hardware and software
    LN

  • Got Quicktime Pro with my Mac Pro, where do I find my registration code?

    When I bought my Mac Pro two years ago it came with QT Pro. I've now reinstalled my computer, how do I get my QT to be Pro again?

    QuickTime Pro has never been included with any Mac. It might have been activated if you bought the Mac with Final Cut Pro/Studio pre-installed, though. If that's the case, reinstall FCP/FCS and it should reactivate QT Pro.

Maybe you are looking for

  • How to enter a Turkish billing address in iTunes?

    I am changing my iTunes store from UK to Turkey. I am entering correct billing information and using a valid card (I have checked this with my bank), but it keeps getting declined by iTunes. The problem is the billing address. It is not clear how to

  • JDev 11, Should we use f:verbatim tag in ADF faces pages?

    When you type something in a facet in a jspx page it automaticaly get into an f:verbatim tag. yet in the code it has a warning: Using f:verbatium tag can cause undesirable results when used with PPR navigation. For inlining styles or javascript, af:r

  • Can't Sign in Using Regular AppleID

    When I try to sign in with my regular appleID, I get the message "We're sorry, your account could not be created due to a system issue." I don't want to make my regular AppleID public, because it's my personal email address, and the email address ass

  • Output Service invocation with webservices

    Hello, I want to invoke the output service with a Java Client using webservices. I have generated the proxy Java classes using Apache Axis, and then I wrote a Java Client invoking the output service, using a simple form (xdp file) and a data xml file

  • Out of curiosity, if you have the time...

    If you have the time, I'd like to see what the results of this for you are. I'm seeing if I can eliminate the possibility of our setup here at the office. Your email should be able to support clickable links (no plain text), and your project should u