QuickTime Pro audio exporting error - help please!

So I've got Perian installed to read 1080p HD movies and I opened up .mkv files in QuickTime Pro and allowed it to read the files into memory (let the grey bar go for a few minutes). Once that was done, I wanted to export the DTS 5.1 surround sound audio track to .AIF format and do a pass through encoding of the video only. After this, I use MAX to convert the .AIF file into an AC3 file which I add back into the video only to create the final .mp4 file with 5.1 sound. I've done this successfully before and I prefer this method to downconverting the 5.1 audio into stereo sound when converting the .mkv to .mp4. This time however, QuickTime Pro miserably failed. I have Avatar in 1080p and The Lord of the Rings trilogy in 1080p as well and I wanted to convert them to .mp4 the same way I've done before. All of them failed with the same error. When I tried to export the audio, I believe it said, "qtKiterrorcatchall (-1309)" and it failed. It said this for all of the videos and strangely enough, it worked great with another .mkv movie I had perfectly with audio and video tracks in the same formats. Does anyone know how I can fix this and export the audio track so I can preserve the surround sound and put it back into the .mp4 video file? Many thanks...

I'm having the same problem. Were you able to get an response or and answer to this problem? Thanks

Similar Messages

Mac Pro setup and expansions for Pro Audio applications? Help please...!

Hello everyone.
I want to buy an 8 core mac pro mainly for professional audio applications (Logic, plugins etc) and I have a few questions about upgrading and expansion.
1. Since Logic is a 32 bit application and can only address up to 4GB of RAM, does it worth upgrading to 16GB or should I spend the money upgrading the processors?
2. I've noticed that the Mac Pro has three (excluding the graphics card slot) full length PCI Express slots. Can I install a PCIe card with the shorter connectors? (like this UAD-2 DSP card: http://www.uaudio.com/products/uad/uad2quadomni/index.html)
3. Can the Mac Pro handle hard disk drives with capacity grater than 1TB and HDDs with speeds grater than 7200 rpm internally? If yes, why Apple doesn't have these options within the Apple Store?
I know that my questions may be a bit silly but since this is a big investment I would like to get everything right.
Any help and advice would be very much appreciated...

Windows 32-bit I have some bookmarked articles, but each app/process has its own 2GB address space and uses page and swap a lot more than Mac.
http://en.wikipedia.org/wiki/64-bit
Free memory doesn't sit idle or go to waste, even Vista/7 will cache 3-4GB to improve system performance. And it isn't released until or unless freed, not fixed or locked and someone else requests more. Mac OS and Mac Pro especially need more memory, and it does show benefits.
A lot depends on how well written software is to take full and proper advantage. And that is ongoing.
Snow Leopard takes a step further into 64-bit, the first time that 64-bit drivers have been attempted. Big review of Snow Leo:
http://arstechnica.com/apple/reviews/2009/08/mac-os-x-10-6.ars
Memory use: http://www.barefeats.com/nehal04.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
4 vs 8 core: http://www.barefeats.com/nehal08.html
http://www.barefeats.com/nehal03.html
comprehensive: http://eshop.macsales.com/Reviews/Benchmarks/NehalemTests.html
Ars review 2009 Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars
Keep your eye on this site for news, tips, on hardware and software updates and compatibility, and reader input: http://www.xlr8yourmac.com/

I tunes wont run and quicktime gives me an error help please!

So, iTunes was running great a couple days ago and now all of a sudden everytime i try and run it it gives me this pop up that says " iTunes has encountered a probelm and needs to close. and asks me to send error report or dont send. I tried uninstalling iTunes and then reinstalling it...didnt work. I tried repairing... didnt work. I have no clue what else to to do and on top of it quick time is giving me this error 2095 crap. Help me befor I loose my mind.

According to Apple's knowledge database, it's most likely a hardware problem. Here's an article in spanish from Apple that might help you, it has some steps to try to restore and further identify your problem.
http://support.apple.com/kb/TS3694?viewlocale=es_ES#error23
ETA: You're in the wrong section for iPhone issues, you might have more luck looking in the iPhone discussions, I believe they've discussed it before. Apparently it indicates water damage or other similar circuitry issues.

Exporting error- Help please!

I'm using Aperture 2.1, and everything was going great for months. A couple days ago I was trying to export versions as jpg's, and an error came up saying that "THE EXPORT OPERATION FAILED TO CREATE AN IMAGE FILE FOR THE VERSIONS..."
Does anyone know what this is and how to combat this? I owe this to a client next week, and need to figure this out quickly.
Thanks

I'm having the same problem. Were you able to get an response or and answer to this problem? Thanks

Premiere Pro CS3 Export problem. help please.

is it normal when i try to export in H.264 Blu-Ray format, there's 3 files created when finished?
Sequence 01.m4v
Sequence 01.m4v.xmpses
and Sequence 01.wav.
and when i try to open m4v there's no sound?
maybe its really for Blu-Ray.
there's really no way to export it with good image quality for youtube and ESPECIALLY, best sound quality ( at least PCM 16-bit 48-Khz or higher )
im REALLY surprise it can't export in AVI.

Welcome to the forum.
In your Export setting, go to Multiplex Settings, and chose anything except "None." Then, you will get a multiplexed file, with both the Audio & Video Streams in one file. See this article for more detail: http://forums.adobe.com/message/3557964#3557964
Good luck,
Hunt

Midi Files Don't Work In FCE..and I don't have Quicktime pro to export it

Hi there,
I am working on a project in Final Cut Express 1.0.1
I have a MIDI sound file that will not import into the application. Also, I don't have quicktime pro to export that file to a mp3 or aiff.
Does anybody know if their is a free plugin that will allow me to export my midi file or import it into Final Cut.

Try this, it may work -
Set iTunes Preferences > Importing > Import Using > AIFF Encoder
Set the AIFF Encoder preferences to 16 bit, stereo, 48KHz
Add the MIDI file to your iTunes library. This may convert your Midi file to AIFF.
If not, once the MIDI file is in your iTunes library,
Select the MIDI file in your iTunes library
Go to the Advanced menu and select 'Convert to AIFF'
Then export the AIFF file to your hard drive
Then import the AIFF into FCE

Adobe premiere pro 6 exporting Error Message: winFile.ccp-814]

adobe premiere pro 6 exporting Error Message: winFile.ccp-814]

I'm getting the same error when I try to export a video.
Below I've tried to follow the above provided list of info required for the forum.
I'm using the most current version of Premiere Pro from CC.
I installed all the updates last night before trying to export.
I'm running an updated version of Win8.
The source footage is mostly shot from my 550D/T2i(.mov), and then there are small overlays of an mp4 video I ripped from Youtube. I'm trying to export the video as MPEG2, at 1080i settings. Is this enough info?
[..\..\Src\Win\WinFile.cpp-814] that is the error message I'm getting
When the problem occurs Ijust hit"Okay", which takes me back to the export screen. I hit "export" again, and then it appears to be exporting, but the progress bar stays on 0%.no it hasn't worked before.
Other software? As in simultaneously? Just Chrome browser. Or in conjunction with Premiere Pro; then nothing. It's a standard export from PP without any plugins or standalones contributing to the export.
As stated above, no I have no third party stuff running.
Hardware
Processor: AMD II X6 1055T 2.8GHz
Memory: 16GB
GPU: ATI 5700 1GB
No, I'm not using Mercury Playback engine.
Only with final ouput. My previews are fine.
Hope that's enough info.
Cheers

How can i make my video card and sounds work on Windows 7 on my Macbook Pro 2.2? Help please...

How can i make my video card and sounds work on Windows 7 on my Macbook Pro 2.2? Help please...

i lost my Mac OSX dvd...

Audio upsampling in Quicktime Pro: Best export settings for Final Cut?

I'm using Quicktime Pro to convert audio from 32 kHz to 48 kHz, for use in FCE/FCP. Quicktime gives me several options for export settings. I want to make the conversion lossless, without increasing the size of the audio file too much.
These are the settings I'm using so far:
Format: Linear PCM
Channels: Stereo (L R)
Rate: 48 kHz
Sample Rate Converter Settings: Quality: Best
Linear PCM Settings: Sample size: 16 bits
Are these settings the best choices? Does anyone have experience doing this kind of upsampling?
Here are the other options in Quicktime:
Format: Linear PCM, A-Law 2:1, IMA 4:1, MACE 3:1, MACE 6:1, QDesign Music 2, Qualcomm PureVoice, and mu-Law 2:1
Channels: 2 Discrete Channels, Mono, Stereo (L R)
Rate: there are other choices, but I know 48 kHz is what I want
Advanced Settings:
Sample Rate Converter Settings: Faster, Fast, Normal, Better, Best
Linear PCM Settings (when Linear PCM is the format): 8 bit, 16 bit, 24 bit, 32 bit (floating point checked), 32 bit (floating point unchecked).
The file size grows quickly as you increase the Linear PCM bit settings.

You can't create something that is not in the file.
Moving from 32kHz to 48 will only make the file size
larger and can't improve the audio.
Doesn't FCP or FCE import your file at 32. Or does it
change it to 48 after import?
I am aware that increasing the audio from 32 kHz to 48 kHz will not improve the quality of the audio. And yes, Final Cut Pro and Express will both capture and allow you to work witih 32 kHz audio.
I have several hours of video shot with 32 kHz audio settings that I'd prefer to have stored on disk with 48 kHz audio, because (a) some applications like iMovie have demonstrated problems with 32 kHz audio in the past, and (b) the majority of my video is shot with 48 kHz audio, so my 32 kHz video will eventually end up in a 48 kHz project, leaving the upsampling to Final Cut. Yes, I do eventually plan to burn my projects to DVD as well, but this isn't an immediate concern.
The problem with doing the conversion in Final Cut is this: Some of the people knowledgeable about Final Cut Pro and Express recommend doing the upsampling using Quicktime or another application, instead of using Final Cut, because Final Cut may not do as good a job as Quicktime. So my intention is to upsample the audio now in preparation for later projects. I don't completely understand why Final Cut wouldn't do as good of a job at upsampling, but a couple of experienced users in the FCP and FCE forums have independently corroborrated this.
Thanks to everyone for their helpful posts and responsiveness.
PowerMac G5 Quad 2.5 GHz 3GB RAM Mac OS X (10.4.5) NVIDIA GeForce 7800GT
Message was edited by: Anthony M Kassir MD

Can anyone help with Quicktime Pro audio prob?

I've been trying to compress an audio/video file shot on my Cybershot so that I can upload on a contest website. Every time I copy into I-Movie, I have no audio (although it plays fine on my desktop). I was told I-Movie does not support muxed streaming. At Apple's recommendation, I upgraded to Quicktime Pro.
The audio and video both work fine when I play it in Quicktime Pro; but when I export it from Quicktime to either MPEG4 or Quicktime Movie, I get no audio. (Also, the audio setting area is grayed out.) Any suggestions? I need to send the file 320X240 around 15 mb by midnight tonight.
Thanks for the help...

Use the "Export to DV" option. (Any of the sub options will work.) Split into segments if needed for older versions of iMovie.

Itunes 10.4.1 64bit for Win 7 can't find quicktime, QTCF.dll error -- HELP PLEASE!

Every time I install itunes 10.4.1 64bit for Win 7, it says it is unable to find quicktime, then instructs me to uninstall itunes then install it again. I've done this several times but still have the same problem. There is also another promt that says quicktime can't find the entry point and there's an error having to do with QTCF.dll ... what is this and how can I get my iTunes to work? Help please!

hi guys i found the solution from a wizard of the community and it works, so u may try as follows:-
Correct Answer by b noir on Aug 24, 2011 8:13 PM
Let's try a standalone QuickTime.msi update. It may not install correctly either, but fingers crossed at least the error messages we get from that install may better indicate the nature of the trouble with the QuickTime install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime.msi install.
Does it install properly for you? If so, does iTunes install properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Export error. Please help

Hi ALL,
When i try to export the database i am getting the following error. Please help
C:\>exp cas/compass@prd_test file='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.dmp' log='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.log'
Export: Release 10.2.0.1.0 - Production on Wed Feb 3 06:04:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully
The version of the db and export utility is same as u see from below.
C:\>sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 3 06:06:35 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
Regards
Arun Kumar

One of the most common causes of these errors is that you are using a higher version of the export utility compared to your RDBMS version. For instance, you might be using the Oracle 10.2.0 exp utility against an Oracle 9.2.0 database. Use the 9.2.0 exp utility instead. Metalink Note 132904.1 discusses the compatibility matrix between exp and database versions.

Quicktime Pro Has Failed To Launch - PLEASE HELP

I spent $31 and purchased Quicktime Pro so that I could put together a video with music of my time here in Beijing.
However, I can't even seem to get Quicktime Pro to launch.
Am I missing something here? I entered in the code on my Quicktime control pannel and it tells me that I have Quicktime Pro, but other than that there is nothing to indicate that I have anything other than regular ol' Quicktime.
Is there some kind of button I need to push or should it have changed to Quicktime Pro automatically.
This is very vexing to me and I would appreciate any help anyone can provide. Thanks!
J.

Kirk,
Again, thanks. I'm getting the hang of the editing part, but am now uncertain as to how to add the music to the videos I've strung together.
Must the song I want to put on it be exactly equal to the length of the movie?
Is there anyway to just have part of the song play?
Isn't there just a drag and drop function like on Windows Movie Maker in which the length of the video will determine how much of the song will be played?
I'm still confused as to how the actual process works. I understand all of the Select All and Copy and Paste. I just don't know where to copy the music so I can paste it on top, or where to go about doing that.
Again, thanks. You've been very helpful.
J.

QuickTime Pro audio sync problems

Hi, when I edit my videos in QuickTime Pro, the more I cut sections out from a video, the more the audio is out of sync from the video as it progresses; so at the start it is fine and in sync, but at the end the video and audio is not in sync at all. The video is fine before I start editing with no sync problems, it's only when i cut parts out. How can I get around this problem?
Thanks

ok, I output a lot of footage using quicktime conversion so I can edit in after effects or output for the web. I usually use the animation or h264 codec but the problem still persists regardless of which codec I use. < </div>
If the relationship between the tracks does not change over the length of the clip, that is, the audio doesn't drift more, your clip's tracks are actually in sync. One of the tracks, video or audio, has been set to start sooner or later than the other. I have no idea how that can happen, sorry, but I'm going to suggest the solution is going to be much less complicated than you might think: it's going to be a simple user error. We all have them.
It's a binary search, then, no way to shortcut it.
You try to find a good export and figure out what's different between a good one and a bad one.
Hope you get better advice on how to debug it.
bogiesan

Quicktime Pro problems, involving Error -43 and disappearing files

I'm very confused, and I'm hoping someone can help me. Right now I'm in the process of trying to get my Quicktime Pro movies to my Ipod (in iTunes), but it hasn't been working for me. Hopefully I can get some insight here.
What I do is, I download the MPEG4 video files and they open up in Quicktime Pro. I then click "Export" and choose Video to iPod. I then choose a destination, and re-name the file if I want (I usually rename it, and send it either to my desktop or My documents). After it's exported, it SHOULD appear in that place, and about 30% of the times it does, the other times it just disappears. However, after I'm done dragging it to iTunes, I then want to take it off my desktop, so I've been putting all of the video files into a folder I created in My documents. Now, they DO load onto my Ipod and iTunes, but when I want to play them in iTunes, it does the whole "Error 43- File could not be found" when I know for SURE it's still on my computer. And if I want to play that certain video file again on Quicktime, when I search for it the files arn't even there, yet when I go in manually I see them.
Some theories I have: When I export the files from Quicktime to iPod, I usually rename the file. Does this affect anything?
My iTunes IS NOT set to manually manage music and videos, maybe I should reset that?
One thing I am curious about, is when I put the exported video files into a folder on my computer, the little icon that comes up for them is the Windows Media Player Icon. This may just be because I'm using a Windows PC, but who knows.
I really hope someone has ideas on what I'm doing wrong, I'd really appreciate some help. Or if someone would walk me step-by-step through the process of Quicktime ---> iPod, that would be wonderful also.

The only time I have experienced error- 43 file could not be found was when having a drive named in a way that QT could not read from. For example (F:\F:\), drive named (F:\) QT could then play. Kirkster points out something interesting in this link on how the error 43 can also be generated:
http://discussions.apple.com/thread.jspa?threadID=1151490&tstart=15
Changing the name of a file should not prevent QT from playing the file, it is unusual to have a WMP logo on the file, what is showing when right clicking and Properties?
It is difficult to understand your post, your all over the place at once on the computer.

QuickTime Pro audio exporting error - help please!

Similar Messages

Maybe you are looking for