QuickTime Pro error: format of source media changed

I keep getting this error message:
Recording stopped because the format of the source media changed.
Media of different formats cannot be recorded to the same file.
I'm importing video clips from a video camera via firewire. I do this all the time and never had problems until today. I recently upgraded to Snow Leopard about a month ago, but it was working fine up until today. Can anyone shed light on what this means and how to fix it?
Thank you.

Jon Walker wrote:
This is an older model Sony prosumer 3CCD camera that records to mini-DV tape.
So does the HC3 and I have to re-set the camcorder output to match the capture settings each time I switch modes. However, I don't use QT for capture since the ability to maintain frame rate is dependent on the platform's CPU power. As you feel the problem is tied to your use of QT Pro, why not download and try the free Vidi dedicated capture utility.
I'll check out vidi. I'm not familiar with it. I've been using this same method to capture clips for several years. I pretty much set the camera once and never have to mess with it again. I don't switch the mode at all during the day.

Similar Messages

"recording stopped because the format of the source media changed" Error

I am trying to import video from my digital camera via firewire to quicktime...
the New movie recording screen appears and works, but after a random amount of time (normally just around 4 minutes..) the recording stops and the message appears..
"recording stopped because the format of the source media changed"
I have plenty of disk space, and am sending the output vid to the desktop..
please help.. I have spent 3 days trying to record the vid...
I cannot import via imovie because I want to have the sound come from a different source then the movie.. i.e. Quicktime lets me get vid from DV and sound from "saffire" sound card..
Thanks
Geoff

Jon Walker wrote:
This is an older model Sony prosumer 3CCD camera that records to mini-DV tape.
So does the HC3 and I have to re-set the camcorder output to match the capture settings each time I switch modes. However, I don't use QT for capture since the ability to maintain frame rate is dependent on the platform's CPU power. As you feel the problem is tied to your use of QT Pro, why not download and try the free Vidi dedicated capture utility.
I'll check out vidi. I'm not familiar with it. I've been using this same method to capture clips for several years. I pretty much set the camera once and never have to mess with it again. I don't switch the mode at all during the day.

Will QuickTime Pro Decoders work in Windows Media Player?

I am working on a Notebook/Laptop with Windows XP Home. This machine does not play DVDs in Windows Media Player. I am considering upgrading to Quicktime Pro for all of its functions. I was just wondering if this would fix Windows Media Player too?
Thanks...

I was just wondering if this would fix Windows Media Player too?
Probably not. QuickTime Pro doesn't include a DVD decoder anyway; if you want to play unprotected DVDs in QuickTime, you need the MPEG-2 playback component, which is completely separate from and not part of QuickTime Pro. Protected DVDs require a dedicated DVD player application.
(50299)

Quicktime PRO NON-Destructive / Unedited videos. Changes won't really apply

Hi
Although my experience in video editing I still find this behaviour hard to understand:
There are some .MOV videos I edit in Quicktime PRO just because they don't require some big editing and save on the file themselves as i already have a backup copies.
But when it's time to upload them on a website it's like the editing was never done.
For example if I cut 30 secs of video on a 1m30s video, on the site still appears 1.30 secs length,
If i open back again the same video in Quicktime from my computer this shows it up edited.
I checked with webmaster and everything is alright on his side.
So what I suppose, is that Quicktime doesn't really cut but rather hide the original footage, showing just the edited.
This can be also confirmed by the fact that both files on my computer and on the site have the exact File Size, although their different length in minutes.
But strange how there is no "revert to original" menu function on Quicktime PRO.
Can anybody say something more technical about this ?
Trust me this bug make waste people entire DAYS, not just time. Thanks.

CiaoCla wrote:
Can anybody say something more technical about this ?
Trust me this bug make waste people entire DAYS, not just time. Thanks.
It doesn't make people familiar with QT waste even minutes, since "Save As" has been around since Moses first edited a movie. Trim/cut/etc., to your original. Save as, self contained, new file name. Keep or get rid of original - if cut/trimmed don't save on exit when asked. No need for revert as you have the new file edited and the source, unedited.

QuickTime Pro error message.

I am trying to use a newly downloaded version of QuickTime Pro to stitch together jpegs into a timelapse movie. I got a vague error message "The operation couldn’t be completed. (OSStatus error -8969.)" Can anyone help?

I've got the same problem. does anybody has an solution?
how many files can QT handle?

"recording stopped because the format of the source media changed"

I just got this error
was trying to use quicktime to capture a video
was able to capture another video successfully but for some reason it doesn't like this tape even though it was recorded on the same machine
any thoughts?

Hi,
I received this error also. I was trying to import video from my Panasonic DV camera via Firewire. It would happen randomly, sometimes mid recording so I definitely know no settings have changed as the error states. It is also happening when importing from a different tape.
I haven't imported video for a while but have never encountered this problem before. I may have been using quicktime 6 last time I imported or it could be a Leopard issue?
I had to import a 60 minute tape in bits as this would happen every couple of minutes, very annoying!
Any help with this issue greatly appreciated.
Thanks,
John.

Quicktime pro error process terminated unexpectedly (11)

I found this thread somewhere else, but there were no solutions available...
All of the sudden (and about the same time as everyone else - the last of May? - I started getting MAJOR problems when converting video files in my licensed version of FCE and my licensed version of QTP. Both of which I depend on professionally.
Apple, if you can't fix a problem, the best thing to do is NOT to shut down discussion in a thread... but to FIX THE PROBLEM!!!
Any suggestions as to what is happening EVERYTIME I try to convert a Quicktime Movie to ANY other format? (Especially FLV!)

Please read the Help & Terms of Use for Apple's Discussions forum. It may give you some insight to why you question hasn't been answered. Also to why Apple hasn't answered your question.
http://discussions.apple.com/help.jspa

Quicktime pro error -43 when exporting

trying to export produces error -43. poster in another forum said the error went away when running as administrator.
anyone have any info or experience with this problem and a work around or fix?
much appreciated,
tcb

I get the same error, "-43" -> when exporting, there doesnt seem to be a reasonable solution either. Quicktime *****

Quicktime pro errors

I am on a mac pro with OS 10.7.5 -- I am getting these error messages. I do not know how to go about re-installing the program. All indication are that it came packaged with the OS release and cannot be otherwise downloaded. Please help.

Formac StudioTVR?... Now there's a name I've not heard in several years. In fact, I didn't think anyone was still trying to use the device any more.
I do not know how to go about re-installing the program.
Which program?
QT 7 is now an embedded structure within Mac OS X—so you can't really re-install it as you once could on pre-OS X systems.
If you are referring to the StudioTVR driver, I'm not sure there has ever been an update to v3.6.2 (14Nov'08 release) for Leopard OS on Intel/PPC platforms and if there has, I'm not sure where you can find it since Formac was never good at customer support.
If you are referring to the firmware upgrade, I believe that had to be done by Formac back when they still supported this product.
With regard to this modal message, it would be helpful to know how and what you are trying to do when the modal message appears. (I.e., opening the app, are you using it as a TV tuner, are you using it as an Analog-to Digital capture device or "snapshot" device, etc?) For instance, this could refer to
An unsuccessful attempt to access the DV encoder component. (I.e., have you checked to see if the DV codec component is actually missing?)
Your Formac Studio device not being recognized by your system. (I.e., I is not connected to your system, it is daisy chained but not using an external power supply, you have a bad firewire cable, no input signal to the device, the device is not properly set up, etc.)
Your software/firmware is out-of-date for your Mac OS X system.
The capture software is not compatible with the device/driver. (Does it work when capturing with iMovie, FCE, FCP, Vidi, etc?)
All indication are that it came packaged with the OS release and cannot be otherwise downloaded.
Have no idea what you are referring to here. Basically the Formac Studio/StudioTVR was an early DAC device specifically designed for compatibility with iMovie and has been replaced by newer, general purpose DAC devices which are more efficient and have higher resolution capabilities over the last decade. In the absene of support by the manufacturer, this device may be DOA at this time with regard to your current system if compatible software/drivers/firmware is not available.

Quicktime Pro Error Message Using iSight To Record

Just wanted to post this quick fix to an issue I had (BTW), before I FIGURED THIS OUT, I called Apple support and was told I'd have to pay $199.00 for QT Support... nice Apple. Anyway, if you are trying to record using the built in iSight camera and get an error message "can't record video" (I'm paraphrasing) check to see where you're saving the video (as in the folder). QT defaulted to my desktop, but it had little RED hash (minus) sign on it. I changed the saved folder location to my "Movies" folder and it worked (FYI: I changed it back to my desktop folder to see if that was really the issue, but it worked fine, so I'm not sure what desktop folder it was looking at, maybe a shared one).
Hope this helps someone and it's free.
PS: Check your settings in preferences as well.

I've got the same problem. does anybody has an solution?
how many files can QT handle?

QuickTime Pro - error copying a segment from a video-stream.

I got one video-stream running, in QuickTime, has so since the last 10 hours. Also a finished stream from another program. The latter I made a segmented copy from, via QuickTime.
Copying the file to my desktop started, but just left a small file, rather than 1 hour of video. The window of this copy can't be closed. I have moved this file to the Trash. One stream is still running, it's about a train-trip, minute by minute - Bergen to Oslo - a 100 years anniversary - 'Bergensbanen' in Norway. The other stream, from which I made a segmented copy, is also still at my desktop, accessible - stream has ended. Attempting a new copy, does not solve my pickle.
I can't close the window of my copied video, in order to make a new one. According to my modem, I'm still receiving video-data, but no video-output, this data is probably from the 'train-video.' I don't want to loose the 'train-video', or the other one, in order to make a new segmented copy of the latter.
Any input on how to salvage the one stream running, the video of the ended stream, and delete/close the segmented copy, are appreciated.

Files can be accessed online.
Internet streams?
They are never on your computer's hard drive to begin with so there's nothing to save.
Think of it like a broadcast TV show.
Streams are only temporarily held in RAM and then only a small part at a time. Whoever provides the media in this form does so because they don't want folks to be able to save it, only watch it.
What you saved to your desktop was a Reference Movie -it points at a file stored elsewhere, which in this case is a server on the internet.
http://developer.apple.com/quicktime/qttutorial/streaming.html

I want to join 3GPP clips together, will Quicktime Pro do that?

I have the Droid and I took some amazing videos at a concert. They are in great quality and I would like to join the clips together to make one longer video. I tried using iMovie, but it doesn't support 3GPP format. I tried converting the files to a format supported by iMovie, but the quality was extremely diminished. Now, I'm looking for software that supports 3GPP files and will let me join clips together. Does Quicktime Pro do this?

Try just changing files extensions to .mov, then edit in iMovie or Quicktime.

Quicktime Pro Key pooched on 7.6.4 install.

Here is the latest on an issue I've seen documented here. Upon installing 7.6.4 (in the middle of a laboratory session!) Quicktime ceased functioning "normally." Upon launch of Quicktime or any ".mov," the player window will appear for a fraction of a second and then close to the Windows Task Bar never to be accessible again. The original problem, in my case, was preceded by a test of converting mp4 video to 3pg utilizing Quicktime Pro. All the source material involved is my own by copyright. All the software on my laptop licensed.
So I uninstalled Quicktime 7.6.4 and reinstalled. There had been some collateral issues as I also use Quicktime plug in processes in Sony Vegas Pro Software. After a scandisk, (fixdisk), defrag etc. Quicktime 7.6.4 did start properly. So I opened the window to enter my Quicktime Pro Key and....
A Quicktime window appears for a fraction of a second then closes to the Window's Task Bar never to be accessible again. It appears that Quicktime users (for Windows) are experiencing some problems with this release but I'm really wondering how the update would pooch the Pro Key. I feel that it is required to wait for another release before I would purchase another Quicktime Pro Key. Which I actually do require professionally.

The update to QT 7.6.4 would have no effect on the pro key it doesn't have to be re-entered after the update. Where you removed and re-installed QT could be the reason, my guess is something to do with administrator accounts, like which one originally installed QT?
Is, com.apple.QuickTime plist on the computer? C:\Documents and Settings\All Users\Application Data\Apple Computer\QuickTime\com.apple.QuickTime plist
If com.apple.QuickTime plist is on the computer, open it. You may need Note Pad to open it. If the pro key is not showing in there then QT pro is not registered in the QT control panel

Can't find my registration key for quicktime pro?

I have to go through a lot of searching in finding it under 2 accounts. It's just a lot easier getting it sent to me again rather trying to find it here where it should be easy to find, but not. It sure is not under my account history? Been like 5 or 6 years when I bought Quicktime Pro. But still should not make a difference in why it's not under account history. Can you please send me the registration code so I can have it registered on a new pc? Thanks.

This is a user to user forum: you aren't talking to Apple here and no-one on here can help you. I assume you've checked your back emails?
Apple's word on the subject says:
You can retrieve purchased registration keys with these steps:
Visit the Apple Online Store.
Click "Account" in the upper-right corner.
On the "Your Account" page, click "View Order History".
Enter your Apple ID and password.
Additional Information
You can only retrieve a lost QuickTime Pro key if you purchased it through the Web. In most cases, the key will be identical to the key you lost.
If you purchased your QuickTime Pro upgrade from another source, the key is not available for retrieval and you must purchase another key from The Apple Store.
If you have already tried this and cannot find it, you can only contact the Store and ask them.

Quicktime pro and windows media formats

hi !
im using win xp pro and have installed quicktime pro to convert my videofiles for my new ipod
that works fine for .avi-, and .mov-files but not for .wmv or m.peg movies
what plugins do i need to play/convert these types of files too ?
thanks for feedback !
Kurt

QuickTime can't even be used to open WMP formats without third party software help. On a Mac we use http://flip4mac.com and pay extra money for the feature.
As I stated above, QuickTime Pro can't extract audio from muxed formats so you must start with a third party application. MPEG Streamclip works for Windows and OS X and is free.

QuickTime Pro error: format of source media changed

Similar Messages

Maybe you are looking for