Quicktime Pro - export as mpeg-4 works in iPod Touch but not iPhone 3G
If I use Movie to iPhone / iPhone (cellular) the quality is pretty dismal considering I use the component cable to pipe it out to HDTV.
So, I tried using movie to mpeg-4 as that allows options. However, the resulting video can be transferred over to an iPod Touch (latest hw/fw) but iTunes (latest version) complains the mp4 cannot be played on the iPhone 3G and thus did not transfer the file over.
Any ideas what settings I can use under Movie to MPEG-4 that will work for both iPod Touch and iPhone? I would like resolutions up to 720, 25 fps and at around 768kbits/sec.
Right now I'm using ffmpeg.exe and I do get great quality, but would like to use QuickTime Pro if possible.
I've tried Movie to iPhone but like I said I do watch movies piped out from the iPhone to HDTV via the component cables. I don't recall the bitrate and resolution offhand, but I know it could be better. Also why iPod Touch can take the Movie to MPEG-4 but not iPhone 3G?
Similar Messages
-
Email works on iPod Touch but not on iPad
I have recently added an email account with Bell Canada. Previously had [email protected], then added [email protected] I set up my iPod and my iPad identically (both have the same iOS version and setup parameters). iPod email accounts work fine, iPad's do not.
I have repeatedly checked the setup parameters, but on iPad I get the message that one or the other of the servers (POP or SMPT) is not responding when I use the 'Mail' icon on the iPad homepage. However, when I access the mail through Bell webmail or through MSN/Hotmail, I get the sympatico.ca email account and it works fine.
Can anyone help me with this?Is the 3G network having DNS problems? It would seem like a likely culprit.
I am usually trying to maximize battery life so when I am in WiFi coverage I typically disable 3G and haven't seen this particular phenomenon. 3G signals do not penetrate structures as well as EDGE nor do they handle obstructive terrain as effectively so for me it's a last resort for data on the go when I have the need for that speed and no other convenient option.
It will get sorted eventually. -
My ipod touch is not working, my ipod touch is not working
Hi, i am pallavi and i have a ipod touch 8GB i have bought this from Wal-Mart, from the last few days my ipod is not working i dont know why can u please help me in this
- When you connect it to your computer or charger does it show that it is charging?
- After connected to a charger for half an hour reset the iPod.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, uontil the Apple logo appears.
- If still not working connect the iPod to your computer. If it shows in iTunes, restore the iPod via iTunes on the computer.
- If it did not show, place the iPod in recovery mode and then then try to restore the iPod via iTunes on the computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
HT4859 Purchased more storage for ipod touch but not working
I have purchased a tv episode and my ipod touch is saying not enough storage. So I purchased more storage for $20, but apparently this is for cloud storage and not for other purchases? How can I get my $20 storage purchase over to my ipod touch so I can buy more videos, etc.
Thank you!You need to contact Apple within 15 days of the purchase to get a refund for iCloud. Plusco lays out the details on this other thread.
https://discussions.apple.com/thread/3404394?start=0&tstart=0 -
Exporting Muxed Files in Quicktime Pro 7 w/ MPEG-2 Component
I have .mpg files I need to be able to get into iDVD. They are MPG-2 muxed files. I have quicktime pro and the mpeg-2 component. I can't for the life of me figure out how to do this. Everyway I try either fails halfway through or I get no audio. I've trying to convert them to Mpeg-4. The answer is probably easy but I am new to Mac. any help would be great.
thanksAs you have discovered, QT does not support the export of sound from muxed mpeg files. Fortunately, this freeware will export to several formats. It also allows you to do some editing of mpegs without re-encoding if that is desired: Mpeg StreamClip
-
I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!
How did you transfer it to the PC?
Not good to export as a Word .doc/x, better to:
Menu > Export > PDF
Peter -
Airport express working for macbook but not iphone.
Hello ccoffey1,
After reviewing your post, I have located an article that can help with Wi-Fi networks. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
My iPod touch is not working in iTunes, but it is showing up on my "My Computer".
My iPod touch is not working in iTunes, but it is showing up on my "My Computer". The instructions from Apple Support is NOT effective. Please help.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
I have an iPod Touch and an iPad4. iTunes recognises both items and lets me work with the iPod Touch but won't work with the iPad. In fact iTunes does not respond to clicking on anything in the iPad window even though it knows that it's connected. Any ideas?
Look her and it may give insite on what is missing. Otherwise:
Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Repair it yourself if you are up to it
iPod Touch Repair – iFixit -
the touch screen on my ipod touch is not working. meaning that i can not unlock my ipod or even turn it off. is there anything i could to to get the screen to work again?
Try # 2 and 3 in link below. If neither work, your screen digitizer might need to be replaced.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
My iPod Touch is not working with Bose SoundDock. How can I fix it?
My iPod Touch is not working with Bose DoundDock Series II. Can anyone suggest how I can get these 2 to work together?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
iPod Touch Repair – iFixit -
Flex mobile 4.6 app works inside flash builder but not in android emulator
Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:ns1="*"
xmlns:local="*"
creationComplete="windowedapplication1_creationCompleteHandler(event) "
actionBarVisible="true" tabBarVisible="true">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected var requestTokenUrl:String = "https://www.google.com";
protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
var loader:URLLoader = new URLLoader();
loader.addEventListener(ErrorEvent.ERROR, onError);
loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
loader.load(urlRequest);
protected function requestTokenHandler(event:Event):void
protected function httpResponse(event:HTTPStatusEvent):void
label.text += event.status;
// TODO Auto-generated method stub
private function completeHandler(event:Event):void {
label.text += event.toString();
trace("completeHandler data: " + event.currentTarget.data);
private function openHandler(event:Event):void {
label.text += event.toString();
trace("openHandler: " + event);
private function onError(event:ErrorEvent):void {
label.text += event.toString();
trace("onError: " + event.type);
private function onAsyncError(event:AsyncErrorEvent):void {
label.text += event.toString();
trace("onAsyncError: " + event);
private function onNetStatus(event:NetStatusEvent):void {
label.text += event.toString();
trace("onNetStatus: " + event);
private function progressHandler(event:ProgressEvent):void {
label.text += event.toString();
trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
private function securityErrorHandler(event:SecurityErrorEvent):void {
label.text += event.toString();
trace("securityErrorHandler: " + event);
private function httpStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
//label.text += event.responseHeaders.toString();
trace("httpStatusHandler: " + event);
private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
label.text += event.toString();
trace("httpStatusHandler: " + event);
private function ioErrorHandler(event:IOErrorEvent):void {
label.text += event.toString();
label.text += event.text;
trace("ioErrorHandler: " + event);
]]>
</fx:Script>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View> -
After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?
Logic's preference files may have become corrupted:
1. Quit Logic Pro
2. In the Finder, press and hold down the "option" key then select "Library" from the "Go" menu
3. Open the "Preferences" folder
4. Drag the following files to the Trash:
- com.apple.logic.pro.cs
- com.apple.logic.pro.LSSharedFileList.plist
- com.apple.logic.pro.LSSharedFileList.plist.lockfile
- com.apple.logic.pro.plist
- com.apple.logic.pro.plist.lockfile
These files will be re-created when Logic is next opened. -
Why exchange email will not work on my ipod touch, but ok on iphone
Why will microsoft exchange email not work on my ipod touch, but with the exact same settings, it works fine on my iphone? What is the reason for this?
Try a soft reset, press and hold both power and home buttons together until the Apple logo appears, about 15 seconds, then release both. If still no joy, go into Settings>General>Reset then tap Reset All Settings. If still no joy, back up your iPod to your computer then do a Restore to Backup, if that doesn't work Restore to new through iTunes. If a full restore to new does not work, you may have a hardware issue, contact Apple Genius Bar to have your iPod evaluated. Good luck, Cheers.
-
I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark
Maybe you are looking for
-
QuickTime will not launch on my computer. I click on the QuickTime icon on the button bar and it just won't open. The colorful little circle just spins forever. I have to force quit every time. I've reinstalled it from the internet download and same
-
Updating Batch Number while delivery creation from sales document
Hi Experts, I have to write code inside user exit MV50AFZZ which updates batch number during delivery creation. Suppose I have a sales having more than one line items. Each line item have different material numbers, and one material number may h
-
Password protection in m425mfp
hi, i have HP M425dn i just want to know that if i set a password using IP adress in web abended then what is this password will protect only copy and scaning function on printer screen OR the printing also will be protected ?? if this password pro
-
Conform process all out of sync.
I can't tell if I'm doing something wrong, or if it's just STP being buggy, but when I try to conform a project to a new version, the audio files get all out of sync! I have a 4-minute video that I already mixed in STP. I made one change to the video
-
Sorting Measure Value Hierarchically
Hi All, I am writing a java application for the OLAP browsing using oracle OLAP API. I am finding hard time in sorting the measure values. I am able to sort the measure values by a single dimension, for example sorting the unitCost by the product hie