QuickTime Pro key entered, can't access QuickTime Pro.

I entered my key as instructed. I even went to QuickTime and downloaded/installed QuickTime Player to see if that was a problem. AS far as I can tell I still only have access to QuickTime Player and don't have access to QuicikTime Pro.
I read a post from April regarding this problem and it really didn't help too much as it ended up resolving a post about audio files. I am trying to import Video_TS files from Mini-DVD, (via LaCie firewire CD/DVD reader/writer) created on my Sony DVD-R/RW camera.
Then I want to copy them to DVD, with Toast 7 Titanium and load them into iMovie to edit. Right now I'm stuck at the beginning; unable to import to the files, and I thought QuickTime Pro was supposed to do this. But I can't even find out because I don't know how to access QuickTime Pro or even if it is available to me.

First, the QT Pro key is a separate purchase from Apple at a cost of $30US. The mpeg2playbackcomponent is an additional $20. However, the playbackcomponent cannot read Transport Stream versions of mpeg2, which is what the TS files you mention are. To do that you can download this freeware. It also will allow export of both sound and video from Muxed mpeg files (mpeg-1 and mpeg-2) which the playback component by itself will not do.
Mpeg StreamClip

Similar Messages

  • I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine".  I need the back up data that I could access on my old mac book pro (that is now broken). Tnx so much

    I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine".  I need the back up data that I could access on my old mac book pro (that is now broken). I can only access time machine  back up data that I've obtained since starting the new mac book pro.  Tnx so much

    Try doing a click-and-hold on the Time Machine icon in the Dock, then select "Browse Other Time Machine Disks".
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Help. Can't access Premiere Pro

    I can’t find or access Premiere Pro on my computer. I am trying to sample the Premiere Pro CS6, trail period. I went through the whole download process from the Creative Cloud. During this process I see Photo Shop and Illustrator have downloaded and show, “Start Trail” buttons alongside them but alongside the Premiere Pro download theirs an icon of check (followed by) “Up to date.”
    My OS is Win7. When I look into the program folder I see Photo Shop and Illustrator folders but no Premiere Pro. I can’t access the Premiere Pro platform. Are there any tips or suggestions that may help to resolve my issue?

    tomjns
    First make sure you are having 64 bit computer. Premier pro will only Run on 64 bit.
    If you are using 64 bit computer, Run cc cleaner tool and check if premier pro appearing there
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    If yes, then remove it.
    Then Quit and relaunch Creative Cloud App.

  • Can't access Logic Pro 9 from app store.

    Hey guys,
    Can't access Logic Pro 9 from app store. I purchased it from the App Store for my iMac in Jan 2012. I know have my wife's old macbook, and I'm trying to get put Logic on that computer too. I just updated it to Snow Leopard so that I could access the App Store. 
    Logic Pro shows up in the purchases tab on the laptop, but when I click install, the install button just goes white for a few seconds, then back to grey.
    If I click on the App itself it says "The item you've requested is not currently available in the Australian Store." Only thing is I tested out downloading it onto my wife's new laptop only 2 weeks ago. Has it been removed from the App Store forever in that short little window? Quite annoying if I've missed the boat by such a short amount of time. If that is the case, is there any other way of transferring the app from one computer to another?
    Thanks,
    Thom

    No.. its still available on the Aus App Store.... I was just speaking with a client of mine in Geelong and he successfully downloaded it under the Purchase tab last Saturday so....
    Sign out of the App Store
    Quit the App Store
    Restart your Mac
    Launch the App Store..
    Sign into the App Store... using the Apple ID you used to purchase Logic Pro 9
    Look for any new Terms and Conditions popup you may need to agree to....
    If you click on the actual Logic Pro 9  icon you will get the message you saw because LP9 isnt available to purchase on the App Store any longer... so only click on the install button to the far right of the Logic Pro 9 entry under the Purchase Tab...
    Failing this... contact Aple directly as it is possible they will need to reset your Mac App Store account for it to work correctly (as has been needed in the past when this has occurred.)
    http://support.apple.com/kb/HE57

  • I transferred my files from a G4 to a new macbook pro, but I can't access my old songs in itunes. I click on the mac tab to access mp3 and acc but it doesn't work. Any suggestions?

    I transferred my files from a G4 to a new macbook pro, but I can't access my old songs in itunes. I clicked on library in itunes and get the mac page to access mp3 and acc files but it doesn't work. Any suggestions?

    They maybe corrupt, try transferring again from the g4. If iTunes is giving you an error then you need to authorize your computer with the same iTunes account as previously. Also, you could try exporting your iTunes library via iTunes on the g4.

  • I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

    I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

    Hi Rochdr,
    You can use the following article to help you address this issue with your mail account in OS X:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I upgraded to Mavericks; Can't access Premiere Pro CC

    I suppose, in the middle of a project, I got a little excited when Apple released Mavericks and upgraded straight away without prior thought to the possible interuptions of workflow.
    I can't open Premiere since I've upgraded to Mavericks. I downloaded the 7.0.1 update today, I thought this would rectify my situtation - unfortunetly not. After reading other posts I uninstalled the application and reinstalled - did nothing. It's still the same issue. It worked perfectly before I upgraded, I'm in the middle of a project.
    I really need to have it finished by Thursday.
    I've tried accessing the program via other applications. I can't access After Effects or Prelude either. I don't use these as much as Premiere but, as it stands.. I'm paying for an almost void set of tools. I know it's a bug and it'll get fixed in time.. but this is urgent!
    Everytime I open the application, I get the splash page and then an error report.
    I've seen other people post something similar to this, I don't know if this is actually help to anybody but this is how the error message begins: Adobe Premiere Pro CC [10296]
    Please, somebody.. help?

    I don't know if this will help anyone but I have finally got it running. Adobe support was only sending me another tiny step to try every 36 hours or so -- I've lost a whole week trying to sort this out.
    I had reinstalled the application many times by using the Uninstall application in the Premiere Pro folder in Applications (and then installing it through Creative Cloud in the menu bar). This gave an option to remove preferences, so I believed it was doing a clean install.
    Adobe's advice was to run disk preferences and repair permissions, and enable the root user and uninstall/reinstall the programme. None of that helped. But while waiting to hear back from Adobe I decided to scour my /Library and ~/Library folder for any trace of Premiere Pro. I removed a number of old files related to older versions of Premiere and that seems to have solved the problem.
    I don't know exactly which step solved the issue, or even whether it will keep running, but I have set my region back to the UK and I seem able to run the software again.

  • Can I access logic pro 7 inst from LE8

    I just got LE8 today, and I have Logic Pro 7 already. Can I access the instruments from Logic pro7 in LE8? (or am I already and I just don't know it?) I can't find any folders specific to one or the other, but there are instruments in LP7 that don't seem to be showing up in LE8.

    You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
    Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

  • Can't access XP PRO on Via SATA with Promise SATA enabled......

    Here's the deal.....I just bought a WD 250GB SATA drive. I currently have 2 WD raptors on VIA in RAID 0(dual boot w/win XP PRO). I installed new SATA using Promise controller and set it up as 1 disk RAID. This works fine with my IDE harddrive(Dual boot w/XP home), however, when I try to boot for the Raptors(VIA sata) I get can't start windows missing or corrupt file (windows root)/system32/hal.dll. Now, when I disable the Promise RAID, XP PRO on VIA RAID boots fine. Do these 2 controllers not work together? or am I just missing something??? Your help is appreciated....

    When you enable the Promise controller, you're no longer able to boot from the VIA Raid. You need to use the Promise RAID/SATA to boot from, or an IDE device. Windows will see the VIA RAID controller, so you can setup a data-storage partition (or something like that) on the VIA.
    Now, you probably want to move your Raptors to the Promise controller, just to make use of both controllers and to boot from your Raptors. If so, you can try the following.
    1. Backup your disks - there's a 50/50% chance that this will not work, but it's worth a try and I managed to do it several times;
    2. Now, boot up your system and install the Promise drivers (you have to play with this a bit, I don't know anymore how I did it last time. I think you have to enable the Promise controller in BIOS without connecting any drive. You'll still be able to boot from the VIA controller);
    3. Shut down Windows and PC;
    4. Connect drives from VIA controller to Promise controller;
    5. Start system and enter Promise RAID Setup utility (watch your screen to see what keys to use - I'm at work now, and cannot check it for you);
    6. Setup a RAID-array (exactly like you had it on the VIA - you may want to check using VIA config tool in Windows for block size, etc.);
    7. When you setup this raid, the Promise uitl will give you a choice, how to proceed. One of these choices is to only initialize the array. Choose that one. The other option will destroy your data;
    8. exit and reboot and hope that it will work. somethimes it does, sometimes it does not.

  • After moving shared profiles to Windows 7/32 Pro PC, I can't access them from XP box mapped to the profile share (P:\Profiles...) after editing profiles.ini to point to the network share. I can edit files in the profile directory from XP.

    Previous configuration: Shared profiles located at D:\profiles\ on PC1 (XP Pro SP3). 2nd PC (PC2 also XP Pro SP3) mapped to \\PC1\Profiles via mapped drive P: and using absolute reference in profiles.ini on PC2. Remote profiles work OK on PC2.
    New PC added (PC7) to eventually replace PC1 (Windows 7/32 Pro). Profiles moved to D:\Profiles on that box. Firefox and Thunderbird work fine on PC7 with the local profiles. Profiles.ini edited on PC1 to point to the network share and will not access the remote profiles. Access permissions are set to full for everyone. I can write and edit to files in the profile directories from PC1.
    I tried adding a profile with the profile manager and tried to force it to use the network share, but it still located the new profile down in the default directory ...\application data\Mozilla\Firefox\

    Well, try this (I was able to fix my with these steps):
    Go Utilities > Disk Utility
    Select your Startup Disk, e.g. Macintosh HD
    Then, under the First Aid Tab, click Verify Disk Permissions.
    If there are errors, then click repair Disk Permissions.
    After it is done, restart the computer and see if your problem is resolved.
    I hope this help.
    Zeke
    www.ZekeYuen.com/blog/

  • Can you access Sountrack Pro Plugins from Logic Express?

    I know that Express ships with fewer plugins and presets and channel strips, etc than Pro does. But many of the plugins are available in STP. Is there any way to access them in Logic or are they hidden to prevent their being used with other programs?

    Unfortunately, you can't use STP plugins in Logic Express.

  • Can't access Mac pro via File Share (icon appears in shared sidebar)

    Hi all
       Lately I've been having File Sharing problem. I have an iMac, Mac Pro (2010) and a Macbook (white), now the moment that the iMac and Macbook are open I see my Mac Pro in the "Shared" sidebar, so everything looks good "they" see it BUT the moment that I try either one to connect to it, it say's "Connection failure".  Now when I try to connect to my iMac and Macbook from my Mac Pro no problem at all and connects without having any problems and see both iMac and MacBook in the sidebar like the others. So why can't "they" connect to my Mac Pro (they used to not so long ago) even though they appear in the sidebar?? I have turned off/on File sharing in my Mac Pro but nothing, rebooted Mac Pro nothing, turned off/on WiFi nothing, checked Firewall and it's green so what's keeping my iMac and MacBook not to connect??? I tried just connecting to the internet with just WiFi and unplugged ethernet to make sure that my WiFi gets and receives signals and it does so the card looks to be working as it should.
    Thanks for any help with this!!!
    Serge

    Hi Capt,
    In order to help you analyze your issue, we need confirm some situations.
    1. Did these 3 computers all join the same HomeGroup or Workgroup?
    Yes
    2. Domain Controller server with two joined workstations you mentioned, did it mean two of these 3 computer joined the domain environment?
    No.  Those are separate computers in their own domain, just using the same network.
    3. Did you ping via IP address or computer name?
    Both, but this morning something is different. 
      a.  MommaDell and M6600 can ping each other both by IP and Name, but can't ping Tower-755 either way.
      b.  Tower CAN ping both MommaDell and M6600 both ways.
    According to your description,
    Tower cannot ping MommaDell and M6600.
    No, Tower CAN ping both MommaDell AND M6600 both by ip and name.
    MommaDell can ping Tower.
    M6600 can ping Tower.
    Both of the above was true yesterday, but not this morning.
    Please check if MommaDell and M6600 could ping each other.
    Yes they can
    And make sure all of them turn on the network discovery and turn off the firewall temporarily for test:
    Network Discovery is ON in all three machines, and Windows firewall is always off because I have ZoneAlarm on all three machines.
    Enable or disable network discovery
    Which?
    http://windows.microsoft.com/en-in/windows/enable-disable-network-discovery#1TC=windows-7
    If it doesn't resolve, please post every computer's ipconfig /all output here for analysis.
    it's 7:30 and I have to be out until 2:30.  I'll do the posting then, and thanks for the help.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Capt. Dinosaur

  • (AIRDROP) Macbook Pro Retina Display Can't see Macbook Pro mid 2012

    Hello,
    I was trying to send and receive files from my macbook pro 13' mid 2012 (MBP) to and from macbook pro retina display 13' (MBPR) using airdrop.
    both on Yosemite.
    The problem is, I can't see my MBP from MBPR in airdrop. But the other way around works fine, I can see and send files from MBP to MBPR.
    I've changed the 'allow me to be discovered by : Everyone' on both mac. Bluetooth and wifi are on. I even tried to search onlder mac from MBPR but no result.
    Does anyone have the same problem? Is there any solution for this?

    I am aware there are symbols. My technical issue is the MagSafe2 adapter. What people typically do is connect their laptops to the wall when they're battery dies off. No biggie. I can attach it to the outlet. Well, when I connect the adapter to the outlet, nothing happens. Nothing happens at home, at Starbucks, at McDonalds, at other people's home.
    When I brought this up with technical support in August when I bought it, technical support person said I might have issues with my electrical wiring at home. I've never had issues with electrical wiring at home because my other Apple products work fine when connected to the outlet. My July 2011 MacBook Pro charged without a hitch.
    And I was able to charge my Retina MBP only at night or very early in the morning.
    But this weekend, I couldn't charge it at all. I'm starting to think it might be the MagSafe2 adapter problem.
    I feel rather ridiculous buying the highest-end of the 15 inch Retina MBP. It cost me over $3000. Right now I'm working with my 5 year old Hewlett Packard laptop. At least my HP works, which can't be said about this top-of-the line Apple product.
    Probably explains why Apple stocks are falling. At $3000 I shouldn't be having these type of problems.
    Sheeeesh!!!

  • So now I own Quicktime Pro, I can never update Quicktime?

    I decided to buy Quicktime Pro last month. Then this morning I am notified that a Quicktime update was available. As I begin installing it I am warned that I will lose Quicktime Pro should I proceed and will have to purchase it again!
    WHAT!? This is ridiculous. After PAYING for Quicktime Pro I am now unable to update Quicktime without losing Quicktime Pro. Please tell me I have this wrong.
    Is this how paying customers are treated? I would never use pirate software, but things like this almost makes you understand why some people do.
      Windows XP Pro  

    In the installation warning it says:
    "IMPORTANT NOTICE TO QUICKTIME PRO USERS:
    INSTALLATION OF QUICKTIME 7 WILL DISABLE THE QUICKTIME PRO FUNCTIONALITY IN PRIOR VERSIONS OF QUICKTIME. IF YOU PROCEED WITH THIS INSTALLATION, YOU MUST PURCHASE A NEW QUICKTIME 7 PRO KEY TO REGAIN QUICKTIME PRO FUNCTIONALITY. AFTER INSTALLATION, VISIT www.apple.com/quicktime TO PURCHASE A QUICKTIME 7 PRO KEY."
    If I update Quicktime, surely that makes whatever I had before a 'prior version' of Quicktime. I have Quicktime 7.1.6. If I update to Quicktime 7.2, in my understanding of English, anything below 7.2 then becomes a 'prior version'.
    I was going to try email someone at Apple for clarification, but they make it impossible to find anyone to email on their site.
    Thanks for the reply Dick Napoli, but can I get a 2nd and 3rd opinion as to what will happen to my Quicktime Pro if I upgrade? I really don't want to waste my money.
    Windows XP Pro
    Windows XP Pro

  • Can't view Quicktime Movies on the web

    this is what im trying to view
    http://www.solent.ac.uk/360/hamwic_bedroom.html
    it worked a while back but not now, now i get the light blue logo with the question mark
    cant change file types in preferences they are not greyed out they dont even show as a list, it says programatically set
    i found qtp whatever it was in regedit changed everything to full control
    moved quicktime .xml file onto desktop from apple computer folder
    uninstalled and installed quicktime a few times
    tried with ie8 google chrome and cometbird
    no luck
    quicktime is terrible, i dont know why so many things on the web need it to play, they may as well ask notepad to open the files.
    cheers

    I'm having the exact same problem... Don't know when but IE and Firefox are refusing to play quicktime files. I can run the quicktime player and play MP3 and MOV files (which is what I normally do) but nothing is playing from the browser.
    I've tried pretty much everything I can think of... in the end, QuickTime is not showing up under Set Default Programs or Set Program Associations (via QuickTime Preferences->Browser->MIME Settings or File Types).
    I can install QT-Lite, and everything works for the browser... except now I don't have a standalone player that plays MP3 and MOV files because I cannot have QT-Lite installed alongside QuickTime.
    Please advise.
    Thanks,
    Jason

Maybe you are looking for