Quicktime pro wont export - just shuts down

Hi - been searching the web for this one, but no luck. My QT pro just shuts down when I want to export. For example I open a FLV file and it plays fine. I then go to export it and QT just shuts down. I can export to WEB but not export. I do have Perian installed - not sure that makes a difference. Also my QT version is 7.6.2
I read a post suggesting i move the flv.component file from QT library but can't find this file anywhere. Any help is appreciated, thanks
Rob

bluxx wrote:
Hi - been searching the web for this one, but no luck. My QT pro just shuts down when I want to export. For example I open a FLV file and it plays fine. I then go to export it and QT just shuts down. I can export to WEB but not export. I do have Perian installed - not sure that makes a difference. Also my QT version is 7.6.2
I read a post suggesting i move the flv.component file from QT library but can't find this file anywhere. Any help is appreciated, thanks
There are lots of malformed FLV files on the interweb. If QT crashes, you found one. Test it in FLV, you are likely to find it doesn't like it either, or Streamclip (as long as you have Perian). If it won't open or export from the latter then you don't have a lot of options. And since it isn't yours to edit then no harm done.

Similar Messages

Quicktime codec does not work, internet explorer just shuts down!

I have reinstalled quicktime many times and still I cannot view any videos or movie previews on internet explorer that use the quicktime plugin. When I open the page that is supposed to use the plupin, a window pops up saying I should install the ActivX controller. When I press ok another popup comes up saying that internet explorer needs to shut don because of an error. So it just shuts down. I have tried to go through the support pages and I cant see anything that would seem to help so there is anyone who knows how to fix this problem, I would appreciate it.
Thanks.

It's been years since I use Internet Explorer (especially on a PC).
You must "enable" the ActiveX control in IE. (Probably a preference setting).
Have you tried using other Web browsers? Most are free.

My MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal. Anyone have this issue before

MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal. Anyone have this issue before? I've only had this for about 3mos. I called apple support. They tried one thing then said I have to take to the apple store. Unfortunately I don't have one nearby. So before I travel an hour+ away I thought is give it a shot on here. Thank.

Hi S,
Did they have you try an SMC Reset: http://support.apple.com/kb/HT3964?

Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

I would instead say you have a problem since nearly all IPs work as advertised. IF you do have a bad phone, take it into an Apple store and get a replacement. Hope you didn't jailbreak your phone though as Apple probably will tell you, you broke it, you fix it.

What do I do when my macbook pro just shuts down and when I plug my charger in, it faintly blinks green and yellow and doesnt charge?

what do I do when my macbook pro just shuts down and when I plug my charger in, it faintly blinks green and yellow and doesnt charge?

Hi aaliyafrommarkham,
In order to troubleshoot this, I would recommend that you start with an SMC reset. Information on this procedure can be found here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

My screen just shut down and it wont turn on

My screen just shut down & wont turn back on What can i do?

What happens if you try a hard reset? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. You may need to attempt this more than once.
Otherwise, connect it to an external power source and leave it to charge for a little while and then try a reset again if necessary.
B-rock

My mac just shut down and it wont turn on! it only make a noice for 3 secods an stops

My mac just shut down and it wont turn on! it only make a noice for 3 secods an stops and keeps doing the seme ting by it self.
and im runing lion on it.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Logic Pro just shuts down

Hi
Has anyone ever encounter this problem where Logic Pro x
Just shuts down with no warning and a window opens saying" report problem " with three options ...send report and so on...
The only thing I can see different is that at the opening of this particular song it says that a file is missing and try to locate file...
And the file in question is a " movie file" which I imported but then removed ....
This was quite a complex song which I had to copy each track and pasted each track into a new project....which works fine...but
Very time consuming.....
If you've had this problem with shutting down let me know how you solved it
Thank you

Rick,
Should I put these two files in the User Library/Preferences?
No.. Just quit Logic Pro...
Delete those two files..
Restart your Mac.. and launch LPX and see if that fixes things...
I did have Logic Pro Studio 9 installed prior to Logic Pro X, but removed it after installing Logic Pro X.
There was no need to do that ..... as they both can happily coexist on the same system. and in fact there are some benefits to keeping LP9 installed (Accessing older projects.. ability to continue using 32bit plugins and so on..)
Did you simply delete the LP9 App or did you use an undelete app to remove it?

HT4623 my iphone just shut down and wont come back on

my iphone just shut down and wont come back on what could be the problem

Connect iPhone to Wall Charger for 10 minutes, it my turn ON itself. If still OFF, then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds time holding both buttons while on charger.

My Macbook Pro 15" (late 2007) shuts down unexpectedly

I have started having this problem intermittently over the past month, and it has gotten worse over the past two days.
I am using my Macbook Pro normally (watching Youtube videos or online streams primarily), and it will suddenly either go to sleep or shut down entirely. If it goes to sleep, I can press enter and it will wake up briefly before going back to sleep about 3 seconds later, until eventually it will just shut down on its own. If it shuts down completely, I can press the power button to start it back up, but it will shut down again before even reaching the login screen. I tried going into bootcamp, but it shut down before I could select the Windows partition.
The only thing that has worked so far is resetting the SMC by holding Shift+ctrl+alt+power button for a few seconds while it is off. That lets me start it up for a while, but if I ever start using it for something a bit more demanding (again, Youtube or video streams, for example), it will shut down after probably about 30 min. of use.
I just got back from the Apple store today to get my power adapter and my battery replaced. The power adapter cable connection was exposed, and the computer had been saying to service the battery for a couple of years now. After replacing those, the service battery message went away, but it just started shutting down again. The Apple store MRI diagnostics only showed the battery problem.
One other piece of info is that I hear a click from the left side of the laptop before it shuts down (can't tell if left front or left back).
Any help would be greatly appreciated. Thank you.

Hello Shamalama,
If you can't install the Superdrive Firmware Update 3.0 first please make sure it applies to your MacBook Pro.
About SuperDrive Firmware Update 3.0 - Apple Support
Follow these steps to find out if your Mac requires this update and if the update is successfully installed:
From the Apple () menu in the upper-left menu bar, choose About This Mac.
Click More Info, then select Serial-ATA in the Hardware section of System Profiler.
Select the DVD entry, and inspect the Revision field in the window below.
On an iMac, if you see Revision: KA15 or 2AHG, your iMac needs this update. If the update has been successfully applied to an iMac, the field will be KA16 or 2AHH.
On Mac mini computers, if you see Revision: 2AHF, your Mac mini needs this update. If the update has been successfully applied to a Mac mini computer, the field will be 2AH1.
On MacBook computers, if you see Revision: KA14, KA19, SA15, SA17, 1APF, KK07, or CP06 your MacBook needs this update. If the update has been successfully applied to a MacBook, the field will be KB19, SA18, 1APG, KK08, or CP08.
On MacBook Pro computers, if you see Revision: KA14, KA19 or SA17, your MacBook Pro needs this update. If the update has been successfully applied to a MacBook Pro, the field will be KB19 or SA18.
Learn what to do if you cannot install the SuperDrive Firmware Update 3.0 .
Then, as linked, check out the article
Mac OS X v10.6.4 and later: Unable to Install SuperDrive Firmware Update 3.0 - Apple Support
More info on the update and install tips can be found at
About SuperDrive Firmware Update 3.0 - Apple Support
Best,
Nubz

Why is my Macbook Pro suddenly and constantly shutting down/crashing on me and giving me a blacked out or blued out screen with lines? Seems like a total system failure is happening?

Macbook Pro- shortly after upgrading to free software upgrade to Mavericks- 10.9.5-
has suddenly been freezing up, but went more directly to 'shutting down,' CRASHING on its own. Most of the time, if I'm even able to successfully get the laptop turned back on, it only stays up/on for a few moments before repeating the failure. The failure is often accompanied with the monitor going 'blank,' or most typically either 'blacking out,' or going blue/green or grey screen with lines or grids all over the monitor. All Desktop visibility, functions or applications in process disappears. This has caused repetetive 'forced shut downs,' which I never usually do, unless prompted to because I have no choice like this.... Or as I said, the computer itself will just shut down and turn off by itself.... Can anyone tell me what this issue is, and I'm pretty sure other Mac users have seen this exact thing I'm describing happening on their laptops, with their systems or on their monitors. Someone please explain or point me in the right direction... as naturally my laptop just went out of warranty as well.... And I don't know if this means the entire system is basically corrupted, dying/dead... and or if it is a monitor issue, a hardware issue, software issue or if there is anything that can be done to restore, repair it, etc.? Also another thing I have noticed ever since getting this laptop- (few years old now...) is that it runs VERY HOT... has in fact burned my lap /skin many times... and seems like the fan or internal operating systems/functions are also perhaps not functioning properly. Can this also be causing the problem? Or is it a corruption or virus of some kind? etc. Thank you.

What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

Macpro 17inch just shut down while using. Tried removing battery and SMC to no avail. Have had this problem before over the last six months but would always restore. Now you just click on the power button front light stays on for 2 sec

Hi, My 17 inch Mac pro laptop just shut down and I can't get it to turn on again. This has happen multiple times over the last six months. Looked through the forum and tried removing the battery and resetting the SMC control to no avail. I was having issues also with the screen a month ago but that resolved by itself. When I took it into the genius bar for screen problems I was told I'd probably need a new CPU board because the vram may be going bad and they just don't fix that
problem. Have held off because of a potential $500 repair and awaiting ivy bridge technology. Does anyone in the community know how I can restart my portable. Right now you turn on the machine and the front light stays on for 2 sec and you hear the machine click off?

I think you may have already been told what the problem is. However look at this and maybe it will help:
http://support.apple.com/kb/TA25686?viewlocale=en_US
http://support.apple.com/kb/TS1365?viewlocale=en_US
http://support.apple.com/kb/TS1367
http://support.apple.com/kb/TS1587
Probably another genius bar appointment is the best way to exactly define the problem.
Good luck.
Ciao.

Premiere Pro and Encore CS6 shutting down.

I recently switched my graphics card from a GTX680 to a GTX780. Everything worked fine until I did that. First I found that I had to add the card to the "approved cards" file for premier and after effects. I did that by simply adding it to the existing list and hitting save. That brought back the CUDA capabilities in those applications.
Premiere was running well but exporting the video ran into some problems. I exported a clip through Media Encoder and it was running great (and fast) until about halfway through and it just shut down Media Encoder with no warning. I tried the same thing exporting straight through Premiere and got the same thing then Premeir shut down. I tried different clips and different formats but got the same results.
When those programs shut down, the rest of the computer runs fine.
Are there steps I missed installing the new card? or do I need to change something in the Bios?
I am running a PC with:
Core i7 3770K (not overclocked)
Asus GeForce GTX780
G-Skill Ram at 32GB running at 1600
The BIOS was just updated in an effort to write that off as a problem.
Any help would be greatly appreciated

Thanks for your response Jim.
Here is the latest. The computer itself started shutting down while working in premiere so I went back into the BIOS and changed the RAM from 1866MHZ to 1600MHZ and that seems to have fixed the problem. I was able to render that file and the computer seems solid again.
I won't be excited until it goes the rest of the day today and tomorrow and renders a 60 minute file again. Not sure what the ram speed was set to before updating the BIOS so I am guessing that was it.

Won't Boot Up - Just Shuts Down

Hi all, I need some help.
I'm trying to build a new computer. I'm running the following:
MSI865 Neo2
Intel P4 3.0ghz
2x512mb Kingston DDR400 Ram
ATI Radeon 9800 Pro
Antec Tru430w PS
Maxtor 80gb SATA HD
Whenever i turn on the machine 5-15 seconds later it just turns off. Sometimes I get as far as seeing a message saying "BIOS Not Installed" then something about the Floppy Drive then it shuts off. If I try it again without waiting 5 minutes or so, the monitor doesn't even have time to turn on before it again, just shuts off.
I've checked all connections, tried reseating ram/video card/etc, and with only the video card and ram connected. I've also tried clearing the CMOS using the jumper the way the manual said to.
Please help, and thanks in advance for your replies.
P.S. On SATA HD's....do you need to plug in power to both sata & the standard 4pin? Also is there a special combination to use since with the 9800 pro needs a connection from the power supply to the card to the Hard Drive?

Quote
It always just shuts down after it tells me "BIOS Not Installed"
This implies you have the FIS2R board. This is the message from the Promise controller indicating it is not going to install it's bios since it didn't find a drive. Once you can get into the bios you can disable the Promise controller and get rid of the message.
Quote
On SATA HD's....do you need to plug in power to both sata & the standard 4pin?
No. This must be one of the SATA drives that has both connectors to ease transition.
Two beeps is either a memory error or a post failure. Try booting with only one stick of memory installed. If that doesn't work try the other stick. If that doesn't work try one stick in a different slot.

MBP 13" late 2011. when I turn it on it goes to an update screen then just shuts down

Lately I had problems when I recharged the battery, charging is constantly interrupted... And now, when I turn it on it goes to an update screen, then just shuts down. O.S: MAVERICKS
PLEASE HEEEELP!
P.D: Sorry for my english.

LaCalle,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the update screen now?

Quicktime pro wont export - just shuts down

Similar Messages

Maybe you are looking for