Quicktime.qts detected as cause for video app problems.

Since installing quicktime 7 I've lost all ability to either work with or encode quicktime files within any video program or otherwise which in some way interprets quicktime .mov footage.
The list includes but is not limited to:
Adobe Premiere Pro
Adobe After Effects
EffectsLab DV
After a program crash I click to see closer details on the crash and windows tells me that the problem likes with the quicktime.qts file. I am currently unaware as to whether this problem has been reported already and if it is a general quicktime 7 issue which will be dealt with in the future.
I've rolled back to QT 6.5 and all functionality is restored. And subsequently lost again after reinstalling QT7.
Is anyone else aware of or experiencing these same problems?

It doesn't help to any great extent that quicktime/apple haven't really acknowledged this. Just to add to my list of products that have conflicting quicktime 7 issues:
Processing (http://www.processing.org) can no longer work with video. Neither webcam or otherwise.
sighs
Thr guys that made EffectsLab have sorted out the Quicktime 7 issues, apparantly there was just one line of code which caused every problem. Will all the software vendors just have to alter their code to accomodate QT7? I hope not...

Similar Messages

  • Last op system update on mine/my wife's iPad causes all video apps (Netflix/Hulu/CBS/History,etc) to NOT flow uninterrupted; constant breaks

    Last op system update on mine/my wife's iPad causes all video apps (Netflix/Hulu/CBS/History,etc) to NOT flow uninterrupted; constant breaks.  Type problem into Safari and many folks having same problems wig Hulu and other video/TV apps crashing repeatedly!  It's EXTREMELY irritating and aggravating!   The apps didn't crash like that until AFTER the latest operating system update for iPads was pushed/downloaded.

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • Supported containers for Videos app ? mkv ? ogm ?

    Hello,
    the "Videos" app only shows .mp4 files (those from my previous andro phone on the SD) ,it does not list .mkv or .ogm files i added via usb storage
    The phone is the Zte Open C, FFOS 1.3.0.x (20140519) (localized in french, bought from zte ebay)
    1) I understand only part of the brazilian ticket below, but does Mozilla plan to add mkv or ogm compatibility to the Firefox Video App ? Or other containers ? What about formats of contents inside containers (x264 ? Xvid ? aac ?)
    https://support.mozilla.org/en-US/questions/982536?esab=a&s=video&r=3&as=s
    2) Are FFOS apps limited to the formats/containers listed in https://developer.mozilla.org/en-US/docs/Web/HTML/Supported_media_formats#Browser_compatibility ?
    If FFOS apps are limited to these formats, can Mozilla extend the number of compatible formats for FFOS ? And is it planned ? In the design for webapps, i don't have the impression that a developer (except mozilla ?) can implement a port of a C/C++ app like VLC or mplayer to FFOS ?
    I know it's a hard question, but having a phone device that can also be used as a video media player and play any video format is useful, and the less recoding/remuxing the better.

    Hi potf,
    I was finally able to track down specific details of formats, containers, and codecs that are playable in Firefox OS. This information is also applicable for Firefox browser, and Firefox for Android.
    These are the file formats that are recognizable by Firefox OS ([http://dxr.mozilla.org/mozilla-central/source/toolkit/content/devicestorage.properties reference]):
    * '''pictures'''=*.jpe; *.jpg; *.jpeg; *.gif; *.png; *.bmp;
    * '''music'''=*.mp3; *.oga; *.ogg; *.m4a; *.m4b; *.m4p; *.m4r; *.3gp; *.mp4; *.m3u; *.pls; *.opus; *.amr; *.wav; *.lcka;
    * '''videos'''=*.mp4; *.mpeg; *.mpg; *.ogv; *.ogx; *.webm; *.3gp; *.3g2; *.ogg; *.m4v;
    Regarding the codecs and containers that are playable in Firefox OS, Firefox currently supports the following media formats where the decoding support is built into the browser ([http://bluishcoder.co.nz/2013/08/21/html-media-support-in-firefox.html reference]):
    * '''Opus''' audio in an Ogg container on all platforms.
    * '''Vorbis''' audio in an Ogg or WebM container on all platforms.
    * '''Theora''' video in an Ogg container on all platforms.
    * '''VP8''' video in a WebM container on all platforms.
    * '''WAV''' audio on all platforms.
    Support for the following formats in Firefox uses operating system decoder support. This means coverage is not available across all platforms. We are working towards this goal:
    * '''H.264''' video in an MP4 container on Firefox OS, some Android devices, and Desktop on Windows Vista and up.
    * '''AAC''' audio in an MP4 container on Firefox OS, some Android devices, and Desktop on Windows Vista and up.
    * '''MP3''' audio in MP3 files on Firefox OS, some Android devices and Desktop on Windows Vista and up. Support for Windows XP is coming in Firefox 26.
    We hope you find this information useful. Please let us know if you have any other questions.
    Thanks,
    - Ralph

  • 4th Gen Itouch IOS 4.3.1 Video app problems

    I just recently updated my 4th gen Itouch to IOS 4.3.1, and was very happy with the additions and improvements until I tried to watch a movie through the videos app. Starting a movie at the beginning, it plays fine except no sound. When I scrub forward to see if this is just some strangeness in the film, it freezes. The play button will flash to pause, but will not play my movie from that point. The movie is in MP4 format and plays fine in Quicktime on my computer through Itunes.
    I love my Itouch and I use it for everything. I have really enjoyed having my movies available on long trips or standing in non-moving lines. Is there a solution for this?

    This is me replying to myself! I can't believe a million others aren't joining in by now! OK. I had Apple call me again this morning and I told them my daughter's iPod touch is having the same issue with MP4 videos. They still wanted me to wipe my device. So tonight I did just that. Wiped it out and then set it up as a new iPod, then put a new MP4 video on it and it still did the same thing! Please anybody at Apple, test this out! It will fail!
    Anyway, just a few minutes ago I tried to setup another "Call me back" with Apple support and their dumb system wouldn't let me pick any days in April! It skipped to May 1st! Geez, what's going on with this company?

  • Latest iPad Video App Problems

    Is anyone else having problems with the latest iOS7 video app?
    I have spent a lot of time numbering all of my TV Shows carefully (Series Number, Episode Number and Episdoe ID etc)
    This used to work perfectly, but now it doesn't.
    When I import a whole series of a TV Show, all is fine. The numbering works correctly.
    If I then re-sync the iPad, ALL episode number are set to zero on the iPad, even though they are still correct within iTunes.
    If I import half a series (for example 1-6) - this is fine - UNTIL I add say 7-12. Then the numbering for 7-12 is OK, but 1-6 all gets set back to zero.
    Its really annoying, and i'm sure that its a simple fix. It should've been discovered during testing anyway. I expect more of Apple developers and testers quite honestly.
    Also, where is the option to play a whole series of shows like we had before???? I though newer versions of software were supposed to improve the user experioence, NOT take away functionality. As I link my iPad up to a large screen TV, I now have to get up and press 'play' after every episode.
    I'm not being lazy, but it's just annoying, when we used to have the option to just let the episodes play one after the other... Or am I just not seeing a hidden button somewhere???

    no offense but I hope if apple are reading they will focus on the more show stopper issues some people have rather then a video starting over and showing seen icon incorrectly which at the end of the day must be seen as a minor nuisance compared to people who can't get network connection or other fatal issues

  • Air Video App Problem

    I installed the Air Video app on my iPad, but am having problems with installing the Air Video Server app on my iMac. I downloaded it and the virtual drive appeared on my desktop. I double-clicked on it and the app appeared. I dragged it to the application folder. When I double-clicked on it, I got a warning message saying that it was an application downloaded from the Internet and asked whether I wanted to open it. I clicked open and nothing happened that I could see! When I tried to move it to the trash, I got the message that I couldn't do that because it was open! Help.

    Look up in your menu bar by the clock and you should see the Air Video icon. From there you can set its preferences. The reason you can't delete it after running it is because it is truly running (as you can see from the menu bar.) Try setting it up to share a folder with videos in it (from the "Server Preferences" menu item.) Then run the iPad app and point to the shared folder. It really is amazing to have such a wide variety of formats playing on the iPad. I've only played with it briefly, but I do like what I see.

  • How do I use my original iphone for videos & apps only, not as phone

    I want to use my original iphone as a video and app player(not a phone) for my daughter, using my library of purchases on my account. I have an iphone 3G and my original iphone is not being used. How do I do this?

    After an iPhone is no longer activated, you can't install a firmware update or restore the iPhone with iTunes (which re-installs the firmware) since activation is required in order to do so.
    I'm not aware of a way to roll a restore back.
    If you have the SIM card that was used when this iPhone was activated, you can try inserting the SIM card and do another restore. Someone here reported that it is possible to install a firmware update or restore an iPhone with iTunes that is no longer activated as long as the SIM card that was used with the iPhone when activated is inserted.
    Message was edited by: Allan Sampson

  • IPad 2 Video app problems.

    I am trying to play a video on the iPad 2, but as soon as I open the app I am greeted by a black screen and cannot play or see the TV shows I bought on iTunes. I have tried restarting and even resetting the iPad and nothing has happened. Does anyone know why?

    I've seen this before in another thread - I found it and copied it here for you. You can try this and it might work ....
    Fixed the problem by searching a video in spotlight on ipad. Played a portion of the video, hit DONE, then back to videos and all were there again. Quit the app, started the app, and all was well. An obvious app bug.
    Open spotlight on the iPad to do a search. (Swipe to the right from the home screen). Type in the name of the movie or video. See if you can tap to open the video from the search as described above, Play for a few minutes - hit done - quit Videos - restart Videos and see if it works now.

  • External HD causing Picture/Video Quality Problems

    (cross posted in Quicktime) -
    Hey everyone, I have been having video issues on Quicktime and they (unfortunately) correspond to two different recent changes. One is my purchase of an external HD (Western Digital Passport 120Gig) and the second is the upgrade of Quicktime. I don't know exactly where to post this question, but I'll post it here as the issue only occurs with videos. In essence, the problem is that the videos become intensely pixelated when playing off of the external HD, and the videos which have been on my system appear to have been affected but clearly not to the degree of those which I transferred off of the system.
    If I am not mistaken, videos which I have put on my system after the last time I had the external HD connected seem to be fine. This is why my concern is that the issue is with the external HD. The HD requires a Y-USB connector which I bought separate from the HD itself. Anyway, the issues with the videos on the HD are really severe, and the problems with those on my internal HD are certainly noticeable. Is this just a matter of needing to get the USB cable from Western Digital (the Western Digital website recommends purchasing the Y-USB cable from them, but I bought it at RadioShack)? Is it unfixable? Is it something else that I am not noticing? Any help would be appreciated. Thanks!

    Just for clarification, you bought a WD passport and need to use the Y-USB cable to connect to your Macbook Pro? I'm a bit confused, but isn't that cable only needed when a USB port can't put out enough power to the drive from the computer?
    I ask because I have a Macbook Pro and a WD passport and I don't need a special cable to connect to it. I just plug it in with the regular USB cable that came with it. This is a wild crazy guess (and probably not true), but perhaps that may be a problem with your issue?

  • Export DV Steam (.dv file) for Video Server Problem

    From Final Cut, I need to export a DV Stream file for our Video Server. It accepts .dv files. Problem is: the exported clip "inherits" just over 5 minutes of black or the last frame of video on the tail. This creates obvious timing problems for our on-air playback.
    I've seen other posts on this forum with identical problems, but none of them were solved. It was however suggest to NOT use DV Stream file. Unfortunately this is not an option for my station, as our server requires those files.
    So in summary, exporting a 30 sec spot to a DV Stream becomes a 5 minute 37 sec spot. No good.
    Thanks in advance,
    TOR
    Mac Pro   Mac OS X (10.4.8)   8 GB RAM

    Sounds weird enough! What servers are you using, and will they not accept a MPEG-2 transport stream as well? Most I've seen do and that can save a tremendous amount of space.
    But back to your problem of the added 5 minutes of black; as I understand your description, you're saying that the extra 5 minutes is added at the tail end ... correct? If so, won't the programming aspect of your set up switch to another stream at the programmed time regardless if the first program is still playing? ie; you enter the start and end time of each event for playback. Say event 105 starts at 8:00:00 PM and ends at 8:00:30 PM. Event 106 starts at 8:00:30 and ends at 8:01:00. Each spot is programmed to air for 30 seconds so at 30 seconds into event 105, event 106 SHOULD start playback and be switched to air - even though event 105 still has 5 minutes of black to go.
    -DH

  • Transitions cause audio/ video sync problem

    Lets see if I can explain this one. Its certainly an odd problem.
    I have an iMovie project, with around a couple hundred photos in it, and some short video clips. Im putting transitions in between everything.
    At some point I noticed that, sometimes, I'll add a transition after a video clip, and then the last few seconds still have my audio from that clip but the video changes to a photo 2 photos later in the time line. Then it changes to the next photo after the clip.
    Im using the latest iMovie HD, and Quicktime Pro 7.5.5, and Mac OS X 10.5.4.

    Hi
    I do like this:
    • Select the video-clip
    • goto Advance menu - select extract audio
    • now apply transition
    • adjust audio clip
    Yours Bengt W

  • Workaround for video pausing problem

    I too was suffering from the problem where my videos would freeze every 30 or so seconds and then continue playing without sound. I figured out that running the video forward and backward by 5 sec. would let it keep playing for another 30s or so. Last night I discovered that simply pressing the center button twice after it pauses will allow it to keep playing without any more pauses. If you jog the video forwards or backwards then it will start pausing again.
    Hope this helps

    My experience with my files is that it stops the pausing until the next time you jog the video forwards or backwards. In my case I'm watching a TV series with 30 minute episodes. When an episode starts I run the video ahead 1:30 and then 30 seconds later it pauses. I then hit the center button twice and the video plays fine for the rest of the episode.

  • IPad video app

    I have downloaded a show but I can't figure out how to watch it. I have seen references to a video app but I can't seem to find on. Should it be on my iPad or do I get it from the app store? If so which one because I can't seem to find one there

    try to search for video app, it has to be there by default.
    it may be just hidden in one of the folders then you go to settings -general- reset- reset home screen layout
    or it may be restricted then you go to settings general - restrictions- turn off restriction

  • MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

    I find the following information that I collected very interesting at the very least...
    Here goes...
    The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
    Here is how I tested.
    Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
    Logitech iFeel Optical Mouse, USB= failed.
    Microsoft Cordless Ball Mouse, PS/2= failed.
    Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
    When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
    Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
    Anyways I figure out it was the mouse, and not the memory.
    Obviously MSI needs to make a patch for this mouse problem.
    I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
    MSI, get to work on a new BIOS to fix this mess!!!  :]
    BioHaz

    Quote
    Originally posted by Raven_
    hi
    its possible to use an ps/2 mouse AND a usb mouse at the same time.
    i used the ps/2 mouse in windows and the usb mouse when playing games.
    you can get some trouble if you do it the way i did it.
    i was in windows surfing and the pointer just jumped all over the screen.
    when i looked on the other side under a table a friends little kid played with the usn mouse.  )
    bye
    LOL, that isn't what I'm talking about.
    There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
    BioHaz

  • The software i use to play video cause for multi display in which my Macbook pro has only a single display. Is theres a way to get a multi display added to to my computer

    The software i use to play dj music videos cause for multi disply in which my Macbook pro has a single display funtion. Is the ant way to get multi monitor display added to my computer

    If the monitor can be detected your Displays preferences should show it in its Arrangement panel.  You may have to play around with your Display panel to get the desired resolution.  And also may have to click detect displays and gather windows to see both sets of preferences on your main screen.

Maybe you are looking for