Quicktime really successfully installed? Need some help here, thanks!

I accidentally uninstalled quicktimex and I wanted to reinstall it. However, I saw no quicktime in the application folder, but the installer said quicktime was installed successfully. What should I do? Thanks

QuickTime Player 7.6.6 is installed in the Utilities folder.
QuickTime X installs in the Applications folder. If you've deleted it you may be able to get it back because your profile says 10.6.3. The 10.6.7 software Combo update may help.

Similar Messages

Need some help here on the proper settings for quicktime exporting from imovie that won't degredate the footage from my handycam

need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200

What are the existing settings iMovie?
Al

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

Need Some Help Here From The Pros....

Hi all...Im new here you see. I have some questions here..
1) May I ask if anyone could just tell me how to actually create a partition like Windows do in Mac OS? I need the partition to do my backups and save some of my important documents.
2) Can we actually create a password to secure certain of my files so that anyone wants to browse it will have to enter the password? Is it possible to do that?
3) Im also trying to use Visor(i cant remember the name, it's a software to enable Mac to run windows without the boot camp) but i tried on my friend's Macbook, I cant use the MSN camera function... Anybody have any idea??? Or it's not compatible with the camera built-in.
4) I want to use "3D Studio Max", its it compatible with Mac OS??? and will it be laggish if i uses macbook 13" white?
Please help....

Hi!
1) May I ask if anyone could just tell me how to actually create a partition like Windows do in Mac OS? I need the partition to do my backups and save some of my important documents.
With your external drive attached, open Disk Utility, found in Applications/Utilities. Choose your drive on the left, and use the Partition tab to set up the number and type of partitions. Partitioning will delete all data on the drive.
2) Can we actually create a password to secure certain of my files so that anyone wants to browse it will have to enter the password? Is it possible to do that?
Don't forget that the Mac, just like Windows, is multi-user. You can set up a user for yourself and one for guests or specific people. Nobody can see anybody else's files. You can lock your computer when you go away from the desk if you want absolute privacy.
Or, you can create an encrypted disk image (also using Disk Utility) to store private files if you really want to stick with one user account.
3) Im also trying to use Visor(i cant remember the name, it's a software to enable Mac to run windows without the boot camp) but i tried on my friend's Macbook, I cant use the MSN camera function... Anybody have any idea??? Or it's not compatible with the camera built-in.
Do you mean VMWare Fusion? I believe iSight support is included in the VMWare Tools - when you're running Fusion, there's a menu option to install/update those tools.
4) I want to use "3D Studio Max", its it compatible with Mac OS??? and will it be laggish if i uses macbook 13" white?
I believe it's Mac only, so you should check the Windows specs (RAM requirements, graphic card VRAM, etc) to see if you can run it within a virtual Windows on your Macbook.
Matt

My new K7N2-Delta need some help here!

Recently i bought a brand new k7n2 delta L and i need some advice on how to overclock with this new mobo, with the km2m it was piece of cake but this is a little bit more complete. I will appreciate the help and tips in this matter more over because my first attempt resulted on a non responsive system :P no post to be more clear.
Thanks in advance.
By the way my cpu is an athlon xp 2000+ tbred (i don't know if it is unlocked)

read all this first
https://forum-en.msi.com/index.php?threadid=40413&sid=
https://forum-en.msi.com/index.php?threadid=32088&sid=
https://forum-en.msi.com/index.php?threadid=38822&sid=

GS60 2PE Hopeless really need some help here!!!

Hey MSIer, I just did a complete wipe on my hard drive and now there's totally nothing left on the drive like really nothing so what I wanna ask is that how do I get back all the pre installed software including windows 8.1 itself, how?
Does anyone out there don't mind taking some time to help list down a guide on how to get back to how the laptop originally was(all the pre installed software including windows 8.1 iitself)? Your help is really much much much muchhhh appreciated!!! T_T

Quote from: Syrellaris;112053
You should be able to restore using the Recovery Discs you made(if you made them..) or by pressing the F3 key during bootup.
Though, if you wiped all partitions on the hard drive, including the normally hidden recovery partition you are kind of screwed.. in that case you need to send it in for repair, but it will not be fixed under warranty.(if you dont have Recovery disc's)
Quote from: JakeSully;112055
Yeah best option when getting a new laptop it is to create a recovery dic or USB recovery and atleast .iso recovery to that way incase you wipe everything on hard disk you can restore every partitions that was wiped including recovery partition that has copy of windows 8.1 64 bit that comes pre-installed.
I didn't do any recovery disc and have yet to try the F3 button that you mention. So let say even if the F3 is not working I'm totally screwed right?

Really need some help here to try and get Fios services in my building

I have been trying to convince my landlord for months to get Fios in the building. Here is a recent email exchange with him. Does anyone know if any of this is true, about the install damages? If it is true, then Verizon needs to get their act together!
Here is the email exchange.
D-
I am sorry but we have no plans to let Verizon in to this building. They do
a lot of damage to the building and do not make the repairs after or pay for
any damages they do.
Thanks,
Steven
-----Original Message-----
From: D
Sent: Tuesday, April 24, 2012 12:19 PM
To: {edited for privacy}
Subject: Question
Hey Steve,
Could you please do me a favor and speak with the building owner once again
about Fios? I know you mentioned he wasn't to keen on the idea of them
doing the install but it would really make a big difference. As of right
now my iPad's cellular connected internet is faster for $30/mo than the
$120/mo I'm paying Time Warner. On top of that, I can't even watch HD
movies on demand. I've had TWC out here twice in the last four months and
every time they claim nothing is wrong. Its very frustrating. I'll do
almost anything I can to assist in this. Please let me know if you can do
anything.
Thank you as always!

james211 wrote:
I have been trying to convince my landlord for months to get Fios in the building.
If your landlord doesn't want FIOS in the building, then it's not going to happen.
Vote with your wallet and move.

I really need some help here....Please?

Hey guys i have posted numerous threads regarding this issue but to no avail so im going to try one last time.
Basically, Itunes works fine UNTIL i start to sync, Then it freezes up for a while then starts to sync a little bit...Then freezes and syncs a little bit..And so on..
It took me 2 WHOLE days to sync 15 episodes of southpark.
I transfered some movies and songs to my wifes laptop and it sync'd everything in around 50 seconds flat, So its now obvious that it must be my PC.
I have USB 2 and i have 6 slots, I have tried ALL the different USB slots and it stays the same.
Does anyone have ANY idea what this could be?
I spoke to the guy who built my PC and he is changing the USB ports, He also said if that doesn't work he will change my motherboard..
Is there a simple solution to this? Am i going to have to change Motherboard? ANY help would really be greatful.

Hold your horses....
Have you done some "rule out" testing? How do you know that the USBs are bad? How do you know that the MB is bad?
1/ do all ports work when you plug a mouse in them?
2/ what is a throughput when you plug a flash drive into these USBs (try 1 at a time) and copy a large file onto it? Test all the ports and compare speeds - are they at least 5-10 MB per sec? If yeah, then they are OK - system wise.
If the USBs don't work and it's a PCI card, look for drivers and if no luck, buy a new card.
If the USBs are built into the MB, then you have no other choice but to replace it, but only as the very last resort. Seems to me that he's trying ot hose you, my friend.....
IN any case, it could be the drivers! Or..iTunes. Did you try to remove & reinstall?

Problems with the address book server! Really need some help here!

Hello everyone!
for about some time now, we're having some troubbles with the address book server located on our Mac Pro Server running SL Server. The connected clients somehow show multiple entries of groups, contacts and everything else address book can show. Sometimes you see one group or contact about 20-30 times or even more.
How can the addressbook server on SL Server be configured that these faults won't show up again. With this present, using address book server is useless. As far as my knowledge goes, I've tried everything I can. I deleted the address book account set up on each client, readded it, but no help. I stopped the address book server on the Mac pro, but no help either.
For your further information: we're connecting 14 clients. Moste of the rum Lion, three run ML and several iDevices connect via WiFi.
Please help me, as this really is frustrating!
Looking forward for your help.
Regards,
Moritz

james211 wrote:
I have been trying to convince my landlord for months to get Fios in the building.
If your landlord doesn't want FIOS in the building, then it's not going to happen.
Vote with your wallet and move.

Really need some help here!!

Right chaps. Been with bt 16 months now(contract due to run out in dec) been paying my bills on time and not running up high bills..my monthly base cost is around 47 pound per month..
Direct Debit is around 62 pound per month and ive just recieved an email saying its going p to 82 per month!!!!1
how can my direct debit be nearly double my monthly bill when we hardlys use the phone (mobiles all the way)
im on unlmited inf 2 (so no extra bb charges),never misses any bills,always bee on time.
Im just stumped as to why my direct debit is going up and not down.
Any help?

Welcome to the forum. The Monthly Payment Plan strikes again! There's no point in trying to guess how the payments are determined as the system works (if that's the correct word) in unfathomable ways. It might be possible to get them amended, or even do it yourself in MyBT, but surely enough it will go wrong again at some point.
Do yourself a favour and switch to monthly billing. It's very reliable in my experience, and once it's up and running you're simply billed each month for the next month's standing charges plus any one-offs (eg call charges) incurred during the previous month. There are a couple of downsides in that any substantial one-offs can't be spread over several months and that you can't change your direct debit date (which is fixed at 8 days after the bill) but that's a small price to pay for the reliability. If you switch while you are in credit, the balance will be set against subsequent bills until it's used up.
You can click the white star next to this message if you think it was helpful.

Really need some help here. My G5 keeps putting itself to sleep and more..

Just out of the blue my mac doesn't turn on. I turned it on a few more times and it still wouldn'tt power up, my screen was just not recognizing anything. So I open up my mac unplug everything, than turn it back on and it works again. But the fan is very loud, I hear grinding noises every now and than, and the weirdest thing is it would not power up unless I took the cover off my mac and removed the plastic bay that protects the inside from dust.
Now it keeps putting itself to sleep. Over and over it's so frustrating.
I'm very concerned here, is this a hard drive problem? I even formated my hard drive, but that did nothing.
What is going on here?

Have you checked the PRAM battery?
I would check it first. When mine went, I had no response from my Mac at all; just a light on my power button; absolutely no boot at all.
Check out things in Texas Mac Man's Battery, PRAM, PMU tutorial on the subject. His tutorial is a little dated (don't believe it even mentions G5's) but the info in it, except SMU not being included, still applies.
I believe this is the battery for a Late 2005 G5 2.5 dual. Yours is near the age it should be replaced.
DALE

Hey Guys, I need some help here

Im doing some create view and create procedures for my work.
In creating view, its just done perfectly.
However with create procedures work, I got some problem with the result.
So here is the coding:
create or replace
PROCEDURE "USP_EDW_CASH_MARGIN"
result_cursor OUT TYPES.cursor_type
AS
CURSOR v_cursor IS
SELECT
to_char (CM100,'99999999999999.99'),
to_char (CM101,'99999999999999.99'),
to_char (CM200,'99999999999999.99'),
to_char (CM300,'99999999999999.99'),
to_char (CM301,'99999999999999.99'),
to_char (CM310,'99999999999999.99'),
to_char (CM320,'99999999999999.99'),
to_char (CM400,'99999999999999.99'),
to_char (CM401,'99999999999999.99'),
to_char (CM402,'99999999999999.99'),
to_char (CM500,'99999999999999.99'),
to_char (CM720,'99999999999999.99'),
to_char (CM730,'99999999999999.99'),
to_char (CM740,'99999999999999.99'),
to_char (CM999,'99999999999999.99')
FROM VW_CASH_MARGIN a;
v_id varchar2(100);
v_row varchar2(4000);
v_clob CLOB;
v_buffer varchar2(10000);
BEGIN
v_id := 'EDW_CASH_MARGIN';
DELETE FROM TBL_INTERFACE_DATA WHERE cd = v_id;
INSERT INTO TBL_INTERFACE_DATA (CD,INT_DATA,DT_CREATED)
VALUES (v_id,EMPTY_CLOB(),(SELECT CURR_PROC_DATE FROM TBL_PROC_DATE));
SELECT INT_DATA INTO v_clob
FROM TBL_INTERFACE_DATA
WHERE CD = v_id
FOR UPDATE;
OPEN v_cursor;
v_buffer := '';
dbms_output.put_line(LENGTH(v_buffer));
LOOP
FETCH v_cursor INTO v_row;
EXIT WHEN v_cursor%NOTFOUND;
if (length(v_buffer) + length(v_row)) < 10000 or v_buffer is null then
v_buffer := v_buffer || v_row;
else
DBMS_LOB.WRITEAPPEND(v_clob, LENGTH(v_buffer), v_buffer);
v_buffer := v_row;
end if;
END LOOP;
if LENGTH(v_buffer) > 0 then
DBMS_LOB.WRITEAPPEND(v_clob, LENGTH(v_buffer)-1, v_buffer);
end if;
CLOSE v_cursor;
OPEN result_cursor FOR
SELECT 'success' AS status FROM dual;
END;
After i run this coding.
I got these errors :
1)Error(46,5): PL/SQL: SQL Statement ignored.
2)Error(46,5): PLS-00394: wrong number of values in the INTO list of a FETCH statement
It says that the error is with this code "FETCH v_cursor INTO v_row;"
Can someone please help me.

ok let me explain with emp table.
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_ename VARCHAR2(2000);
BEGIN
OPEN c;
LOOP
FETCH c INTO v_ename;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_name);
END LOOP;
CLOSE c;
END;Here i'm selecting 2 columns in the cursor and getting into one variable.
So i'm getting error like this
ORA-06550: line 7, column 1:
PLS-00394: wrong number of values in the INTO list of a FETCH statement
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignored
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_ename VARCHAR2(2000);
v_sal NUMBER(10);
BEGIN
OPEN c;
LOOP
FETCH c INTO v_ename,v_sal;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_ename||v_sal);
END LOOP;
CLOSE c;
END;Here i'm selecting 2 columns in the cursor and getting into two different variables.so no error.
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_row c%rowtype; -->record type declaration
BEGIN
OPEN c;
LOOP
FETCH c INTO v_row;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_row.ename||v_row.sal);---> Here i'm mentioning which column to be printed
END LOOP;
CLOSE c;
END;Same thing i'm getting all columns variable into the records so no error.
and also pls read this
How to ask question
SQL and PL/SQL FAQ

Ipod is not recognized in Windows or itunes...Need some help here!

I have the ipod connected via the USB cable. I have the newest updated program and itunes installed. For some reason the iupod is not being recognized. anyone know what i can do??

What's on the screen of your iPod?
Try resetting it: Make sure the hold switch is OFF so that there's no orange color showing. Then hold down the MENU and SELECT (center) buttons for about 10 seconds, and you should get an Apple logo on the screen. When you do, you can release the buttons and try again.
You can also try connecting the iPod to a different USB port, preferably one on the back of the computer if you're on a desktop computer.
If that doesn't help, try these:
http://docs.info.apple.com/article.html?artnum=61711
http://docs.info.apple.com/article.html?artnum=93716
CG

I need some help here please!

i am working on a website thats going to be a friend loop
such as facebook myspace classmate etc. im in the proccess of
making the site now and i was wondering what i need to to to enable
useres to be able to login and create a profile page on my site?
how can i do this using DW2004 what am i looking at here? also
anyone who would be interested in helping e-mail
[email protected] we have the site up on a server but we are
far from done

> such as facebook
> myspace classmate etc. im in the proccess of making the
site now and i was
> wondering what i need to to to enable useres to be able
to login and create a
> profile page on my site?
hire a team of skilled programmers, put them in a cage and
toss money at
them.
or spend a lot of time learning how to do it yourself.
or try a free or commercial pre-written application
http://www.hotscripts.com/search/?q=myspace&cat=All&page=1&sort=&license_typ
e=free
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Quicktime really successfully installed? Need some help here, thanks!

Similar Messages

Maybe you are looking for