QuickTime ruined Flash *.swf in web and doesn't show most trailers
Hello there,
Guys I've big problem with QuickTime 7.1.3
most of flash games in the web and flash ads.. totaly flash website
Does not work at all with this last version of Quiktime
also most of the movies trailers doesn't work
take this e.g. http://www.apple.com/trailers/disney/meettherobinsons/trailer_small.html
it shows quiktime's logo and some of the trailers show broken quicktime logo.
I tried to get rid of Quicktime but iTunes doesn't work without it
so what is the solution guys?
just doublechecking. have you enabled flash playback in your QuickTime preferences, central?
see:
QuickTime 7.1.3 and Adobe Flash
and for instructions on enabling flash, see:
iTunes 7 won't play interactive booklets purchased from the iTunes Store
Similar Messages
-
Cache Web Content doesn't show how much?
When in the Network tab, the cache web content doesn't show how much content is used, the line is missing. I tried clicking on the clear button but it doesn't work.
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode" -
A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.
It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....
-
when I'm looking at my recent text messages on my phone, and I'm on the screen where I see a list of people I have texted. I click on a name to open up the conversation, however it is blank and doesn't show the conversation even though we've been texting back and forth the day before. So my question is how can I see the conversation?
Try the following procedure:
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
Distiller 'default settings' blank and doesn't show all job options
We're experiencing a problem with Adobe Distiller 9.3.0 being blank next to "Default Settings" with the error, "Error in /Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions: /CheckCompliance out of range".
I can delete that joboptions file, which removes the error message, but the Default Settings pulldown menu still is blank and doesn't show all of the joboptions files that it should. Only 2 of them are showing up in the pulldown.
How can I fix this?
I've tried deleting all joboptions files and letting Adobe self repair them and have tried deleting a few com.adobe.distiller* preference files and nothing yet seems to work.
Thanks!I am connected to a network but we don't share applications. CS5 Design Premium is installed on my machine.
See screenshot below:
What is the relevance of this? We seem to have the same location for the output module file.
Why does mine not work?
See screenshot below:
The Adobe Output Module is in my Startup Scripts but it still doesn't work. -
my iphoto is version 9.2 and doesn't show any updates avail when i check for updates. how do i update to latest iphoto then?
Launch the App Store application and log in with your Apple ID. Check to see if iPhoto is available in the Updates section.
OT -
Flash SWF Performance Testing and Data
Looking for some recommendations on tools that can be used independent of the source (that is just on the swf) to check for Frames Per Second, total size and how often the movie loops.
Needed for Flash Banner ad quality assurance.The need was solved by writing my own AIR app to read the SWF file header.
http://www.lonhosford.com/lonblog/2011/01/17/read-flash-swf-header-in-air-with-parsley-fra mework/
You can drag a swf file and see the header data. As well you can load a swf from the web.
Enjoy. -
HP 5550 web server doesn't show all required tabs
Good afternoon!
I have an issue with web server on hp 5550 Laserjet. Everything was good, but after reboot, it doesn't show all tabs such as "Information", "Setting", "Networking". It shows only "Home" and "Networking"...
Do someone know how to fix this issue?
Thanks in advance!
Any help will be appreciated!
IgroYour best bet would be to try Rapidweaver: www.realmacsoftware.com
Best,
Andrew
I am not very into this stuff (can't write HTML),
do you might have a suggestion for an other
WebsiteBuilder?
We can't afford GoLive (which was very cool in the
early days built by CyberStudio) nor have I time to
learn or buy the complex Dreamweaver. -
Found an Ipod 8g gen4, had been on the wet and muddy ground, after cleaning, I purchased usb cord to recharge and had to reset to make it work Loaded Itunes to my pc and then loaded my cd's to the Ipod.Had to delete the music from my pc to make room for other stuff, now I want to get on line w/ the pod but it doesn't show up on my pc's "my computor list, and when i type in my password for my wifi the pod tells me I have the incorrect password, but it is not.Any help on how to connect the pod without loosing all the content I have on it ???
Try on another computer to help determine if iPod or computer problem.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Help. Installed new hd and it does and doesn't show up
I'm helping out my nephew who's in college. His hard drive failed, so he sent his laptop to me and I installed a new hard drive. I replaced his 60 GB drive with a 120 GB. (G4 Aluminum 12 inch) I hooked the drive up to my ibook by putting it in target mode and the drive showed up. Formatted it and sent it off to him.
He has tried using the original restore disks to install 10.3 on it, but the hard drive doesn't show up. He hooked it to his G5 tower via firewire, and it does show up in target mode. He used Disk Utility on his G5 to attempt another format, but when trying the install disks, he found the disks still won't recognize the new drive.
What do I try next?Scott:
I am not sure what is going on. If the problem persists, try this:
Formatting, Partitioning Zeroing a Hard Disk Drive
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel. (You are about to create a single partition volume.)
Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
Check to be sure your Volume Name and Volume Format are correct.
Click Erase button
Quit Disk Utility.
Installation Process
Open Installer and begin installation.
Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Check box to install X11 (Tiger) BSD Subsystems (Panther & earlier).
Proceed with installation.
After installation computer will restart for setup.
After setup, reboot computer.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Connect to Internet.
Download and install 10.3.9 Combo Update or Mac OS X 10.4.11 Combo update (PPC) depending on OS installed.
Computer will reboot.
Repair Disk Permissions as before.
Go to Apple Menu > Software Update.
Install all updates.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Let me know how things go.
Cheers
cornelius -
My flash website gets stuck and doesn't load properly
I have developed a flash website that works perfectly well
when i test it on my computer. when i have loaded it onto the web
it seems to get stuck.
www.adamdunnesculpture.com
if i do a hard refresh (Ctrl & F5) it will load properly.
is there any code that will force the flash movie to fully load...
i am totally stuck and have worked hard on this to allow me
to teach this at the school i work at. any advice would be very
very gratefully received.
Thankyou in advanceyou should use preloader code or the onLoadInit() method of
the moviecliploader class to ensure all assets are loaded before
any attempt is made to use those assets. -
When i go to http://www.getpersonas.com/en-US/ it just shows up as text and the graphics and details don't show up. It used to show up, but then I had to have my computer reformatted from the beginning and after I installed fire fox, this site doesn't work properly. wy?
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* http://kb.mozillazine.org/Websites_look_wrong -
Flash player for web and offline
i saw a tutorial series that uses the same player for
online: flash
windows .exe
mac: .app
well the player looks the same once launched
is this just a matter of creating the player in flash and then exporting to each of the 3 ? (flash, exe, app) ??can you also export air player
http://www.vtc.com/modules/content/airplayer.php -
Some flash web content doesn't show up on certain computers
Hi,
I've just put up a portfolio website- catmerrick.com- and a
lot of people are telling me that loaded video and slide shows
aren't showing up on their computers. It works fine on mine- any
thoughts as to why this might be, and what problems I should be
looking for? I would be extremely grateful for your help, and thank
you for your time...
Best,
CatCat,
> a lot of people are telling me that loaded video and
slide
> shows aren't showing up on their computers. It works
fine
> on mine- any thoughts as to why this might be,
It may be that people who fail to see your content also fail
to have
Flash Player 9 (or any version of Flash Player) installed.
Using something
like Geoff Stearns' SWFObject, you can very easily display
default
content -- such as text or an image -- to let people know
they need to
install the plugin. Meanwhile, people have *have* the plugin
(and a high
enough version) will automatically see your Flash content.
http://www.adobe.com/devnet/flash/articles/swfobject.html
http://blog.deconcept.com/swfobject/
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
My ipod is not recognized on my windows 7 anymore. Drivers are up to date and working properly, everything on my computer is fine, it's just my Ipod. It does not show up in my "Services". It's not my computer, because it doesn't work on any other computers either. I do not know what to do, and I really need help please.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Compatible connectors for OIM 9.1.0
I am using OIM 9.1.0 but the problem is most of the connectors available for download are for the prior versions like 9.0.4 or before. And these connectors do not work with OIM 9.1.0 (Does not show in OIM Interface for Installation when copied to Con
-
How do I run a security scan on my macbook pro?
How do I run a security scan on my macbook pro?
-
Multiple Idocs (DEBMAS06) into one single file
Hi All, Multiple Idocs(DEBMAS06) are sent from SAP in bulk to be sent to FTP server via XI...(Cannot use Append the file as The structure is with Header,Detail(all the idoc details) and Trailer) I have seen different threads which speaks about the sa
-
Current Settings vs Uncompressed
I work with XDCam HD primarily and when exporting a final QT master I always do it "using current settings" (ie- native XDCam HD sequence settings) and get a great finished product. A collegue recently complained about a DVCam sequence he exported us
-
Hi Experts: Im trying to make a new layout of a balance sheet with more fields than original. I was viewing standard layout in CR and i found a xml datasource and this layout doesnt have parameters. Have you tried doing this, becaus