QuickTime shortens time of pictures playback created in iMovie ...
Hi,
I exported 150 pictures from iPhoto to iMovie. Each pictures is timed to 4 seconds.
When finished, I exported the complete movie to QuickTime 7.1.3. When played from QT, almost 1 out of 2 pictures cuts the time to 1 or to 2 seconds instead of playing it for 4 seconds. Somebody as a clue ?? Maybe a configuration to apply ??
Robert
I got the movie into FCP a couple of different ways, hearing no audio the first way then trying to bring it in another way to see if it gave me audio. First I imported the QT movie that resulted from my iMovie project. I found it in my external drive where I had it stored, and I imported it.
When I detected a problem, I undid that and opened Finder, selected the external drive, found my movie and dragged the icon into my bin.
In either case, when I opened it in the canvas, it played -- video only. When I dragged it into the timeline, it separated the media into one channel of video and two channels of audio. It would play -- video only. There was a red render bar that I eliminated by rendering all, to no effect for recovering audio, and then by rendering 'audio only,' which also didn't work.
I then tried dragging in a second iMovie QT project to see if the same problem existed. It did. With that project, however, responding to the red render bar by hitting 'render all' gave me a window saying it would take two hours. Why that wasn't the case for the other movie, I don't know. Perhaps it's the only one that might have worked, should I have had two hours to wait. It freaked me out a little 'cuz it didn't even appear to start working on the render after several moments of watching my cursor turn into a rainbow on and off. So I just closed it out and posted my question.
Rx
Similar Messages
-
Is there a way to check the date and time a picture was taken
I would like to be able to view the date and time a picture was taken on my iphone
EXIF Wizard will do the job. I also created an app that shows date and time. You can scroll through your photos and automatically see the month and year change as you scroll - then pick a certain photo to see month/day/year and time.
https://itunes.apple.com/us/app/photo-date/id605218393?ls=1&mt=8 -
PSE changes time of pictures when changed from RAW to JPEG?
The RAW files of my pictures show the true time the picture was taken. But when I save the file as a JPEG format, it adds more hours to the actual time. What is causing PSE to do this and how do I correct it??
Or have you stripped the Metadata during the Export.....if you have "Copyright Only" selected in the Metadata section of the Export dialog, all original dates are stripped, and you'll get only the file created/modified dates (which will be the date/time of export).
-
Quicktime Export Times In Leopard?
I was wondering if anyone who's upgraded to Leopard could tell me if Quicktime export times have gotten better, worse or are comparable to Tiger--especially those using Mac Pros.
Thanks!I have seen on MediaSilo.com a tip to get Elgato H.264 working with Compressor, but I can't seem to be able to find it. Basically, the trick was to create a duplicate setting in Compressor that Final Cut Server is able to read ( not as Quicktime Export Component), associate it with a Final Cut Server's compression setting and later reassign that setting in Compressor to Elgato.
I will keep diggin' for this tip, it was actually a screen recording. -
my daughter has created an imovie for a school project, last time she did this and downloaded it onto her memory stick the teach could not play it on their windows pc, how do we convert it or change it so the teacher can play. thank you
Meg\'s Dad wrote:
… I assume this format is what is needed to play on the class "Smart Board" also? …
here in ol' Europe, school boards use chalk and are not smart …
h264.mp4 is actually the most common 'standard' (4000 video 'standards' aaaaand counting)
mp4 is indeed universal (Mac, Windows, Linux), and since YouTube, the h264 codec has a good installed base .....
you can bump into probs only when it comes to sheer amount of data:
for instance cheap 'digital frames' are sortof over-whelmed, if you try to playback 720/30p in high quality.
I'm not familiar with 21st cent devices as SmartBoards ... again, it could happen, you have to reduce resolution/fps/bit-rate to avoid clutter&stutter in the video.
I'm using such encoded files successfully on Playstation3, WD HD TV or flatscreenTVs with integrated usb-connection (via stick), etc
imho, it should work welll .............. < fingers-crossed > -
Secure Store Service Application takes a lot of time and does not create the database
Hi everybody,
I was trying to configure sharepoint performance point and I was following the instruction. After I created the performance point services application I tried to creat the secure store service application. When I do this, the progress window stays open forever
even after 2 hours. If I close the window, I will see that the secure store service and proxy app is created and the application pool also is created in IIS but the database is not and the application service is stopped. even when I want to delete it, it's
the same story and the progress window stays until I close it manually. Nothing has been logged in the event viewer because it doesn't throw any exceptions.
I don't think that I have permission issues on the database server side because I have created the performance point service app and the database is there. I have used the same credentials to crete the secure store.
I have restarted the secure store service and IIS for many times and even the server itself.
I'm wondering if anybody has had this issue because I couldn't find anything on the web.
Thanks,
EdwinAlex, please ignore my previous answer. I found more information in the ULS. At the time that I started creating the service application by power shell these things are logged and they are repeated several times:
it starts with:
11/13/2013 15:19:55.52 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj6 High
Creating Secure Store Service Application 'Secure Store Service Application'.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj9 Medium
Creating "database object" 'SP_SecureStore' for application. At this time database is not created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk0 Medium
Saving "database object" 'SP_SecureStore' in the config db.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.83 w3wp.exe (0x0944)
0x0DB4
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 SPUCWorkerProcessProxy.exe (0x13A0)
0x02B0
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wl Verbose
Tracker not started because call not made from Service Host.
11/13/2013 15:19:55.83 WebAnalyticsService.exe (0x0A6C)
0x1B88 Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
Finally it says:
11/13/2013 15:19:55.90 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk9 High
Secure Store Service Application 'Secure Store Service Application' created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d -
Is there a way to create a picture from video in iMovie 11
Is there a way to create a jpg picture from video in imovie?
I have noticed several work arounds which are not so easy. This was previously a feature that was very helpful to put in stills in the drop zones in idvd from your video project. Only makes sense. Why has it been removed?See my post here.
https://discussions.apple.com/docs/DOC-3231
We are all just users here. Nobody knows why Apple includes features or not. -
Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas NowakHi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan -
every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."
Open the iCloud preference pane and uncheck the Contacts box. Do the alerts stop?
-
Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?
Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file. -
I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?
Download and open this program, lets you look around your I phone as if it was a disc drive, might find em in the iphones drive.
http://www.macroplant.com/iexplorer/ -
Time Machine Picture Library size is 2GB smaller in backup than computer disc.
Time Machine Picture Library size is 2GB smaller in backup than computer disc using Cmd I (Eye, not EL—don't we all love sans serif fonts as default) for both info.
Ah, this is readable at faster reading speeds.
Now ( oops the return key killed the font setting).
Now, we'll use run-on paragraphs. OK? ¶ On topic: I need more space to install a newer iOS on my iPhone. ¶ Someone at Apple Store Genius Bar advised deleting the album of pictures originally copied from my computer when I had vast memory space since it is already on the computer. Got 1GB About to say Available was still too low for the new iOS install. ¶ Another Apple Store Genius Bar advised making a good backup using TimeMachine on my computer and deleting all the pictures from my iPhone by the painful method of selecting each collection. ¶ So I thought I'd check how successful the backup was. Cmd I (doesn't look like El, yea!) on the Picture Library was 38 GB on my back up disc and 40 GB on my computer disc. ¶ Desktop folder is 87.1 MB (87,091,206 bytes) in both. How do I get the other 2 GB on the backup?Time Machine Picture Library size is 2GB smaller in backup than computer disc using Cmd I (Eye, not EL—don't we all love sans serif fonts as default) for both info.
Ah, this is readable at faster reading speeds.
Now ( oops the return key killed the font setting).
Now, we'll use run-on paragraphs. OK? ¶ On topic: I need more space to install a newer iOS on my iPhone. ¶ Someone at Apple Store Genius Bar advised deleting the album of pictures originally copied from my computer when I had vast memory space since it is already on the computer. Got 1GB About to say Available was still too low for the new iOS install. ¶ Another Apple Store Genius Bar advised making a good backup using TimeMachine on my computer and deleting all the pictures from my iPhone by the painful method of selecting each collection. ¶ So I thought I'd check how successful the backup was. Cmd I (doesn't look like El, yea!) on the Picture Library was 38 GB on my back up disc and 40 GB on my computer disc. ¶ Desktop folder is 87.1 MB (87,091,206 bytes) in both. How do I get the other 2 GB on the backup? -
How do I combine two iPhoto libraries into one without losing pictures or creating duplicates?
How do I combine two iPhoto (iPhoto 09) librairies into one without losing pictures or creating duplicates?
Two ways - use Aperture or use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
LN -
Having a hard time with permissions to create dir and files in www
Having a hard time getting permissions to create directories and files in www folder:
I followed the following guide here: https://www.digitalocean.com/community/ … arch-linux and here: https://www.digitalocean.com/community/ … arch-linux
So now I have a LEMP stack which runs fine and I have my root account secured and a new username "adriano". If I SFTP into the server using the username adriano, I am unable to create any files or directories. Trying to do a simple wordpress install doesn't work because I need to be able to create a folder for it, and a wp-config.php file. Both of which, like I mentioned, I do not have permissions to do. Yes, the username "adriano" has been added to the sudoers file via visudo.
I've never been very good at UNIX permissions so I was wondering if maybe someone can help me out?
Also, since I am using nginx it does not seem like I have a www-data group or user and my www folder is /usr/share/nginx/
Thank you,
AJNo, no, you guys misunderstand me. I am not that much of an oblivious person. 95% of the time I understand EXACTLY what the code that I am copying and pasting does. And when I don't, I look into it further before executing said commands. I just tend to not remember commands so I google them, see examples, and then copy and paste them to avoid the busy work of typing out long strings. For example, it took me like 6 months to remember that to untar a .tar.gz file it was -xvfz.
But I digress. drcouzelis, I do have root access. It's my own VPS. However, I have always used shared hosting through different hosting providers and now that I got a VPS and have to do everything myself, I am a little bit lost.
I followed what wonderwoofy said and created a www-data group, added the adriano user to said group, and changed the owner of my http server root to www-data, and I SFTPed into the server again with filezilla and it still works perfectly. However, those "hordes of hackers" drcouzelis warned me about does not sound pleasant so I am really really really hoping one of you guys can tell me the next steps. Root login is disabled in the /etc/ssh/sshd_config file, and I also changed the port to a random port I created. My web files are all served from /usr/share/nginx/ (there are different folders in there that correspond to different domains.) Now what I am wondering is that if user "adriano" is in the sudoers file as ALL=(ALL) ALL, doesn't that pretty make adriano the same as the root user? The reason why I am so worried about this is because I heard/read countless times that working through the root user is BADDDDDDDDDD and will bring evil and shame upon your life (not in those exact words) and that you should never work with it. Also, do I have to worry about anything dealing with groups and/or users and/or permissions when it comes to PHP? I have php-fpm installed.
I am willing to buy anyone who can help me out with this a beer or two and I will be forever in your debt.
Thank you,
AJ
Last edited by AJCR (2013-05-23 02:52:03) -
Can Anyone Tell Me Why Time Machine Won't Create A BackUp Folder for a Programed Backup?
Does anyone know why my Time Machine is NOT creating a backup folder on and regular scheduled backup? Just recently I downloaded the Time Machine Editor and it said to turn off the regular Time Machine (ON/OFF) switch, and just run off the TM Editor. However, at 1am in the morning, it comes up with the error saying it can't create a Backup Folder. I'm sure this is a simple solution but I really don't know how to handle this... Would appreciate any and all help in this matter... Thanks, Gary
Were you already backing up with Time Machine - ie, did you have an existing backup folder on the drive before you started using Time Machine Editor? If not, you probably need to do at least one full backup with TM, and then start using TME to schedule backups.
Matt
Maybe you are looking for
-
IPhone 4s not being recognized by iTunes.
It seems that ever since the latest iTunes release, iTunes no longer regonized my iPhone. When my iPhone is plugged into my laptop, it simply says "iPhone", not "Ian's iPhone". I plugged my phone into my wifes laptop(she's also an iPhone user) and it
-
My Ipod Touch 4th generation (8gb, iOS 5.1) crashes for no apparent reason. There is no rhyme or reason to when the crash occurs. Once it crashes, the only way to reboot the iPod is to connect it to an external power source (computer or AC outlet). O
-
RSS feeds won't post numbers anymore
When I up graded Safari won't post the number of articles that are new anymore. It won't do on my bookmark bar or bookmark menu. I have tried resetting and nothing seems to work.
-
Hi I am using query strings to pass variables such as groupName=Bonza. However, I don't want the user to see this string so i was wondering if there is a simple way for the JSP or HTML page to encrypt or hide or mangle the query string, so instead of
-
Table control in custom infotypes
Hi, I have a requirement to add table control in a custom defined infotype. The fields include two date fields, one icon field, number and name fields. I also need to populate my icon field with three different icons according to the modification in