Quicktime start & Stop not working in Inspector.

I drag an MPEG4 file to Keynote 09 (5.1) as soundtrack. I click onto Quicktime to use just a snippet of the song, but it is not available....I can only use the entire song.
How can I fix this?
Also, can I adjust the volume from slide to slide? or does the volume need to be the same throughout the usage of that audio file?

your last stop is working though? try putting a couple frames
b4 the first stop.. see if it is skipping over it. ... it shouldn't
do this..but it might because of loading over with
presentation.

Similar Messages

I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings

I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much

Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.

Soft button STOP not working in alarm mode ver 50 ...

I have recently update my Nokia 5800 firmware to ver 50 and found the soft button STOP not working during alarm. This was oK in ver 21.
Anyone has any idea how to correct this issue ?
Chris
Solved!
Go to Solution.

Have u noticed that there aren't buttons but actually moving arrows? U will have to slide you finger across the screen in the moving direction.

Quicktime movies do not work, please help me

Hello friends. I have a problem that is absolutely driving me crazy. I belong to a popular pay site that has quicktime videos. I used to use the site and watched the videos, even though I have to use stupid dial-up because I live in the sticks, the videos worked, though they loaded slowly. After an absence for a half year or so, and after upgrading to Quicktime 7 (7.0.3), I rejoined the site and found the videos no longer worked for me (except for, mysteriously, maybe once or twice, I don't know why). I asked on their forums if anyone else had the problem, and I couldn't find anyone that did. I asked their help line and couldn't get any good information either. Finally, a nice person from their site phoned me and tried to help me personally with the problem, and he couldn't figure it out either. This man is a serious Mac user and programmer and he was stymmied. We tried all the QT settings and messed with the keychain settings, but nothing worked. Well, I did get a video to play once by changing the key chain settings, but then it went back to not working again after that.
Specifically, here's what happens: when I click on a link to open a video, the QT player comes up, but it's in the small screen with only the time window and the buttons, not the video. Then.... nothing, that's it.
The man I spoke with confirmed my suspicions that maybe there was something wrong with my system (I did reinstall QT several times, which didn't help.) I went out and bought OSX.4 and installed it, which was not easy because there was a problem and I had to do a clean install, erasing everything on my hard drive and starting over. I was sure that would solve the problem, but NOOOOO, it still does exactly the same thing.
This is not some shady website I'm dealing with, it's a popular, rather expensive (for me, anyway) pay site with many happy members. And one extremely frustrated one.
Thanks for any suggestions you can come up with. Maybe a setting I've overlooked? Anything at all?

Ok, maybe I can jog someone's memory just a bit, maybe I can get some help on this. I tried using my laptop with the website videos, with the same result, just either blank video screen or the small screen with nothing but controls and time bar. Then I took the laptop to a friend's house and tried it on her wireless system and it worked fine. I came home, tried it here again and it didn't work. I know it would take longer, but it should work here on my dial-up connection. It used to work, before I upgraded to Quicktime 7, and the people at the website say that it should work too. They don't know of anyone else with this problem. I've tried changing my quicktime preferences but that has no effect.
Any more ideas? Thanks again.

Major Finder Issues (Also Quicktime, Itunes, Spotlight not working)- Please

I have a lot of problems, but I posted in this forum b/c I'm figuring if I can get the finder back I may be able to resolve the other issues.
Here is the situation. I'm running OSX Tiger on a Core2Duo Mac. A few days ago I did a mac upgrade that upgraded Quicktime. Unfortunately, that caused Quicktime to stop streaming a site I use for school. I was getting video but no sound. Quicktime streamed other sites just fine. I came to this website and saw others having this problem. Don't remember exactly what thread I read, but a few threads convinced me that I could uninstall Quicktime and get the old version which had worked for me. I dl'ed Tinker Tool to erase all files with the name quicktime in them (simply dragging Quicktime to the trashbin proved fruitless), including those in the system folder. When I tried to remove the trash it said some quicktime files were in use. So I restarted the comp to kill whatever background programs could have been running. When it restarts, I have no finder. The trash is still full, but I can't delete anything. I can't activate anything in the dock. I click on the icons and they just jump around. All my desktop items are missing. I couldn't even get online b/c firefox wouldn't activate and I don't keep Safari in the dock b/c I prefer Firefox.
I ran disk repair and repair permissions. Nothing changed. I added a new user account and this is how I was able to get online. Although all the problems I mentioned still exist, this account has Safari in the dock and the program opened so here I am online. So far the only programs I can open from the dock are dashboard, mail, addressbook, system preferences, and safari.
I'm guessing I deleted something that was vital to the system. But all I deleted were files with quicktime in the title.
I've tried to reinstall quicktime, but it says I can't b/c there is a newer version already on the drive. But, this version is not really there b/c I cannot stream or use sites that require Quicktime.
Of course, I would just re-install OS if I had backed-up my data, but I'm between external HDs right now.
Can't get access to the Genius Bar until tomorrow and I really need my comp in its full capacity asap. Any help would be appreciated.

You are welcome, Anita.
I relate to the economics - I was a student myself (1000 years ago...well, maybe a little less).
When you do get an external HD (I bought my last one for under a $100 on the Apple on-line store), take a look at a little program called SuperDuper ($28 at www.shirt-pocket.com). SD makes bootable clones - pretty fast after the first one. I have no installed OS X 10.5, so I have not had a chance to look at Apple's built-in backup feature.

Quicktime Movie Controller not working on Macs

Hello,
I just created the following page:
www.garrettleejohnson.com
Click either video section.
Everything is good EXCEPT the Quicktime movie controller (pause, play, slider) is non responsive -- only on Macs/OSX. I can click and double click and start/stop but thats it. It works fine with Windows clients.
Any ideas?
Thanks in advance.
Greg

You've got some page element covering the lower portion of the QuickTime file which prevents the controls from working. Check your page layout (maybe footer) and adjust them.
http://www.garrettleejohnson.com/GarrettJohnson/Media/Junior%20Play%20collection %20run.m4v
Your "video" is nearly 45 MB's in file size and its dimensions are 720X540 yet you've used a smaller dimension in your page. This could also be part of the error.

Recording desktop in Quicktime 10 does not work in SL

OS 10.6.8 and QT 10.0 (131)
I want to record one of my desktop processes with QuickTime (v10.0). However it does not work, I get the following message:
The operation couldn't be completed. (OS Status error -108.)
I do get a file that appears to be the recording but it does not want to open. And I do need to force quit QuickTime almost every time the error appears.
On my other Mac, also with 10.6.8, it works fine. So I am puzzled.
Anybody know what this could be? How to fix? Open to suggestions.
I was also looking for a version of QT10 to reinstall it but can not find one. ( I was hoping this might fix it).

Why not use QuickTime 7.6.6 which is located inside your utility folder?
I was also looking for a version of QT10 to reinstall it but can not find one.
You can custom install directly from your system disc that came with your computer. Follow the onscreen custom install instructions.

Airplay from quicktime movie does not work

I just updated my iPad2 to iOS5 and my ATV2 to the latest version (4.4, I believe). Both are working fine and runnin the new versions.
Then I started Safari on the iPad2, loaded the page with the iPhone 4S presentation and played it. Plays fine on the iPad. Then I select the airplay button and it lets me choose between iPad and Apple TV. Good too. But the Apple Tv fails with a complaint about not being able to play the type of content.
Should this not just work?
Thanks.

Thank you. I converted the file to .MOV and it now works on Safari but has not worked on Firefox (have not tried yet on a Windows based machine). At least headed in the right direction. I will also contact 1and1. Thanks again.

Quicktime app does not work

I have just tried to open a TS file on my Mac Pro Yosemite and got a message that ¨ To open this file I needed to download and install Quicktime Mpg2 Playback Component¨,
Buy online from http.//www.apple.com/quicktime/mpeg2 which I did. I paid €19.99 and it downloaded. I opened the installer and then got the message ¨QuickTime MPEG2 can't be installed on this disk. This software is intended for an earlier version of Mac OS X ¨.
I have now paid out to Apple for something that leaves me out of pocket for something they recommend that does not work. How do I get my money back?

What version of Quicktime are you running? The MPEG-2 Playback Component is only for Quicktime 7. It will not work with later versions of Quicktime. If you are running Quicktime that ships with Lion or later, this component already is included. However it should still work with Quicktime 7 if it was installed prior to migrating or upgrading to Lion or later.
Determining QuickTime MPEG-2 Playback Component version - Apple Support
OS X: Unable to install QuickTime MPEG2 Playback Component - Apple Support
If the file in question will not run under the Quicktime that shipped with Yosemite, try using VideoLAN.
https://www.videolan.org/

Quicktime movie does not work on hosted iWeb website

Problem: I have a media file portion on my iWeb designed website that displays pictures (working very well) and one that is supposed to show a movie (not working at all). The movie was made with iMovie and has an .m4v extension. When you click on the link for the movie it shows a blank screen on Firefox and a Quicktime logo with a big question mark on Safari. I'm attempting to view the website on my Mac with the latest Quicktime software on it but it doesn't work. Any ideas on how to fix it?
Some additional info: the hosting provider is 1and1.com and I have a Windows server package (unfortunately). Also, if I publish the site to a folder the movie area works flawlessly, it just does not work on the hosted site.
Thanks!!

Thank you. I converted the file to .MOV and it now works on Safari but has not worked on Firefox (have not tried yet on a Windows based machine). At least headed in the right direction. I will also contact 1and1. Thanks again.

Java Web Start is not working on Firefox 3 Kubuntu 8.04 64bit

Hi,
When I try to access web start demo applications it redirects me to download page. It is not working for both Firefox 3 and Konqueror. If I type form command line javaws it will start some policy editor, which I assume means that web start is working. Is there any way to fix this?
Alfas
I am using:
Firefox 3.0.1
java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) 64-Bit Server VM (build 10.0-b22, mixed mode)
Ubuntu 8.04.1
KDE 3.5
Applets were not working so I installed OpenJKD (now they work)
OpenJDK Runtime Environment (build 1.6.0-b09)
OpenJDK 64-Bit Server VM (build 1.6.0-b09, mixed mode)

plugin and webstart are not yet available in 64bit jre distributions from Sun.
These are targeted to 6u12 or there abouts.
/Andy

Process chain - After error ABAP - trigger a metachain start does not work.

Hi,
I have a process chain, where after an ABAP runs into red (ERROR MESSAGE triggered), another process type, like start a new meta-chain, or start an infopackage starts.... But is does not work. After i go to logs, it asks me whether i want to trigger the following jobs, if i choose yes, it works. But i need to start it automatically, when the ABAP Routine has an error message (RED) in the chain.
Any idea, because I tried to solve it all the day, but i did not manage to get itwork...
Many Thanks,
L.

Hi,
the problem is not the ABAP Program.
I have the following situation:
A Metachain contains as second step a call of local chain. After the local chain, according to the status of it (green o red), we have other different steps. So we have two different link (red and green) starting from the local process chain step.
Inside the local process chain there is the ABAP program that check several parameters and if something is not as expected fails with status red. if this situation happens, the local process chain becomes red and in SM37 inside the job i see the error that i forced, but the status is not triggered to the first metachain , so the corresponding following steps are not triggered.
This issue happens only if fails the ABAP program because, for example, a Infopackages loading fails every thing works and the corresponding steps in the metachain are executed.
In the ABAP program in order to force the status red we have the following code:
MESSAGE e162(00) WITH 'Status' 'Red'.
Any idea?
Thanks,
Veronica

Start menu not working

i had windows 8.1 , it's came with pc . two days ago i installed windows 10 build 9926 but the start menu is not working in any way .

i had windows 8.1 , it's came with pc . two days ago i installed windows 10 build 9926 but the start menu is not working in any way .
Probably you need to install updates, particularly KB3036140.
Since you cannot use Start menu to go to Windows Update, follow this method given by Insider Hub.......
Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
Select the Internet Explorer icon.
Type http://update.microsoft.com into the address bar and select
Enter.
If you are prompted to run a control, click
Yes.
This should bring up the Check for updates window. Install updates.
If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
Hold down the Windows key and select L to lock the device. Swipe up or select
Enter to open the sign in screen. Select the
Power icon on the log in screen to restart the computer.
OR
Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
shutdown –r to restart.

Start up not working

I have installed Update 10069
I have had Spartan not working and thanks to the forum I did a restore and fixed that problem.
I now find that the Start Up will not work at all No List or tiles when I click the Icon
Any help would be appreciated
Regards

Windows 10 build 10074 ISOs are available for download:
Pro from Windows Insiders:
http://windows.microsoft.com/en-us/windows/preview-iso-updat…
Enterprise from Evaluation Center:
https://www.microsoft.com/en-us/evalcenter/evaluate-windows-…
Microsoft has updated the product keys for 10074
For Pro edition use this: NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
Windows 10 Pro build 10074 or later (6P99N-YF42M-TPGBG-9VMJP-YKHCF)
Enterprise edition use this: PBHCJ-Q2NYD-2PX34-T2TD6-233PK
Windows 10 Enterprise build 10074 or later, (VTNMT-2FMYP-QCY43-QR9VK-WTVCK)
Wanikiya and Dyami--Team Zigzag

FCP Quicktime movie files not working with iDVD

I have been using iDVD for years with no issues. Now, whenever I export a QT file from FCP 7 and use it in iDVD, I get a blank screen with audio and no video.
I am able to work around the problem by using "Export Using Qucktime Conversion" and creating a smaller file, but I've never had to do that before. What in the world am I missing here? Shouldn't I be able to export as a QT movie, as long as the file is not gigantic? (the most recent one I used and had this problem occur was only about 500mb). Thanks for any help...
Ben

Hmmm,
Well this is helpful information but unfortunately didn't solve my problem. The movie in question is only 5 1/2 minutes long. When I export it as a QT movie, iDVD "acts" like everything is fine; I can preview it within iDVD, etc.But when I burn the disc, it comes out blank. I then went back to FCP and exported it using QT conversion, and the DVD burned just fine. (I exclusively use Taiyo Yuden media and have never had a bad disc).
This is just a simple 16:9 movie, shot at 720/30p on a Canon DSLR. I ingested with Log and Transfer using ProRes422, then dropped it onto the timeline, added a music track, rendered, and exported as Quicktime movie. It looks great on my desktop using the QT player, but it simply will not work in iDVD. Still stuck here...
Ben

Quicktime start & Stop not working in Inspector.

Similar Messages

Maybe you are looking for