Quicktime Streaming Server - qtss - service does not start in Server Admin.
Hi,
We're currently trying to configure a video/audio streaming server, but we've fallen at the first hurdle and the QuickTime Streaming service will not start (I am trying to enable it via Server Admin). Can anyone think of any possible reasons for this?
Many thanks,
Dave
It's probably not hugely relevant but are you trying to start it remotely or locally on the server? I know Server Admin can get a bit laggy and not always do what it should when starting services. Also can you check in the logs for the service (Quicktime Streaming>Logs>Error Log) to see if there's anything in there which gives and indication. Paste the output here if you need anymore help with that.
N.
Similar Messages
-
Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically
Hello,
I am having an issue when I start my TMG 2010 machine:
(*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
The service "Microsoft Forefront Server Protection for Exchange Registration Service"
does not start, it is set to "Manual".
I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
Thanks in advance.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)Hi,
Have you received any errors in event logs when
you started the Microsoft Forefront Server Protection for Exchange Registration Service?
Based on my research,
Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
down and does not need to be running for transport scanning to occur.
You can refer to the link below:
Services
Best regards,
Susie -
Inventory service does not start 610 failed login
L.S.
Netware 6.5, SP6
ZEN 7.01SP1IR1
Sybase database
Standalone server
My inventory service does not start. I've looked around but did not yet find the solution. I did have an error I've read nothing about:
logger screen: java:Class com.novell.....ZENWorksInventoryservicemanager exited with status -1
C1, Inventory service object shows 610: database location policy is not configured (but it is)
NRM: health, failed login: user: .CN=Server package_ZENSERVER:Netware:ZENDateBase.O=context.T= tree
Any suggestions
Thomas RoesThomasroes,
either of these help?
http://www.novell.com/support/php/se...1%200%20506894
http://www.novell.com/support/php/se...1%200%20506894
Shaun Pond -
Hi,
my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
Do you have any idea for that ?
In windows Evenetlog it says Event Type: Warning
Event Source: beasvc
Description:
peoplesoft-PIA service stopped
Thank for help.after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
bea logs are under bea DIR.
Thnks! -
Opmn service does not start when try to start Oracle BI Services
Hi ,
I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
Any Idea how to fix this one.
ThanksMaybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).
-
Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MDHi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support -
ACS 3.3 - CSAdmin service does not start
Hello all,
I'm running Windows 2003 Server (Enterprise). I installed the eval version of ACS 3.3. The installation process was successful. However, the CSAdmin service does not start. There is an Event Log error that states:
Failed to initialize AAA Client Config Module.
Anyone seen this before?
Let me know if anyone has any suggestions.
Thanks,Saw this and it turned out to be the user had eTrust virus scanning on the server also. Removing that and reinstalling the ACS software fixed it up. Can you check that you don't have that specific software (we may need to file an incompatibility bug), or try removing any other virus/firewalling software that may be causing issues.
-
Windows Web Server W2k8R2sp1 Problem
Eventlog service does not start
- Cause: Java Web Start does not start
-- Cause: Had a virus in "C:\Program Files (x86)\Java\jre1.6.0_03\bin\javaws.exe"
(AVG removed file. Re-installed java in: S:\Java\re1.8.0_31
In registry: file-paths seem to be okay (regedit find: javaws, Java Web Start)
Can't find a solution on-line.
What to do?
It is a dedicated production server managed by remote desktop (Leaseweb.com, ip: [37.48.64.130])
Any help will be highly appreciated.
Thanx in advance,
DickHi Vivian,
Rebooted several times
The point is the event-viewer is not working. Because the eventlog-process is not running/starting. Because JavaWS-process isn't starting
Registry: http://niceware.com/zen/All_registry_20015-03-25_reg.txt
Processes: http://niceware.com/zen/services-2015-03-25_csv.txt
This is some info by SC.EXE:
=========================
CMD in elevated mode:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sc queryex eventlog
SERVICE_NAME: eventlog
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 1068 (0x42c)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
C:\Windows\system32>sc queryex javaws
SERVICE_NAME: javaws
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
C:\Windows\system32>sc start javaws
[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.
========
C:\Windows\system32>sc start eventlog
[SC] StartService FAILED 1068:
The dependency service or group failed to start.
========
C:\Windows\system32>sc qc javaws
[SC] QueryServiceConfig SUCCESS
SERVICE_NAME: javaws
TYPE : 10 WIN32_OWN_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 0 IGNORE
BINARY_PATH_NAME : S:\Java\re1.8.0_31\bin\javaws.exe
LOAD_ORDER_GROUP :
TAG : 0
DISPLAY_NAME : Java Web Start
DEPENDENCIES :
SERVICE_START_NAME : LocalSystem
C:\Windows\system32>sc qc eventlog
[SC] QueryServiceConfig SUCCESS
SERVICE_NAME: eventlog
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
LOAD_ORDER_GROUP : Event Log
TAG : 0
DISPLAY_NAME : Windows Event Log
DEPENDENCIES : javaws
SERVICE_START_NAME : NT AUTHORITY\LocalService
C:\Windows\system32> -
Our server has gone down and the Coldfusion 8 service will not start. There is no information in any of the logs for anything today since its gone down. Ive checked the root logs directory as well as the runtime logs directory.
The server.log is the only file being updated and it shows "Starting logging..." and then "Starting license..." and hangs. The service does not start and the log gets nothing more after this point. Memory continues to go up slowly, we've increased the start timeout tremendously with no effect. There is little to no CPU usage.
Our server is licensed and has never had this problem before. It is the standard version.
Our server is completely down and we are losing clients. From what we can tell a windows update occurred, which we have since removed in case it was the issue, and when the server restarted CF did not come back. We have been working on this for hours with no results.
Please help and let me know anything you may need which will help diagnose our issue.
ThanksSo that others who see this know the solution.
I started Coldfusion from the command line: c:\Coldfusion8\runtime\bin\jrun -start coldfusion. This brought up all the commands as it worked through them. From that we found that CF was looking for license.properties in the C:\Coldfusion8\runtime\lib folder. We found a copy in the C:\Coldfusion8\lib folder. For now we've left it running under my account and then after hours are going to try and see if the service will run now that we've copied that properties file to the other direcory.
Probably simple to everyone on here but was new and odd to us. Wanted to put what we found out here in case it happens to anyone else. -
I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please adviceThe Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
OracleOraDb10g_home1TNSListener service does not start
I am using Win XP. I have installed Oracle 10g.
OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
ThanksOracle installation was successful.
after lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
c-wireless.uc.edu)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
Thanks. -
CiscoWorks Tomcat Servlet Engine service does not start
Hello!
CiscoWorks Tomcat Servlet Engine service does not start.
Events in the Windows Event Viewer:
The CiscoWorks Tomcat Servlet Engine service terminated unexpectedly. It has done this 1 time(s).
output pdshow and file stderr.log, hs_err_pid2128.log attached.
Do you have an idea how to resolve this?
Thanks!The only things which I see are wrong are the start types for the IPM NG database engine and HUM database engine services. They must be set to Manual, not Automatic. However, that would not account for the Tomcat crash. The crash points to an error in the code which processes regdaemon.xml, but I see no reason why that should be failing. As I said before, I think it would be best to open a Service Request. Remote access would be helpful to dig into this problem in more detail.
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com -
Server service does not start, error 1075
"Could not start the Server service on Local Computer - Error 1075: The dependency service does not exist or has been marked for deletion"
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv]
"Type"=dword:00000002
"Start"=dword:00000003
"ErrorControl"=dword:00000001
"Tag"=dword:00000006
"ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
52,00,49,00,56,00,45,00,52,00,53,00,5c,00,73,00,72,00,76,00,2e,00,73,00,79,\
00,73,00,00,00
"DisplayName"="Srv"
"Group"="Network"
"Description"="Srv"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv\Security]
"Security"=hex:01,00,14,80,b8,00,00,00,c4,00,00,00,14,00,00,00,30,00,00,00,02,\
00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
00,00,02,00,88,00,06,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,\
05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,\
20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,04,00,00,00,00,\
00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,06,00,00,00,00,00,14,00,00,01,\
00,00,01,01,00,00,00,00,00,05,0b,00,00,00,00,00,18,00,fd,01,02,00,01,02,00,\
00,00,00,00,05,20,00,00,00,23,02,00,00,01,01,00,00,00,00,00,05,12,00,00,00,\
01,01,00,00,00,00,00,05,12,00,00,00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv\Enum]
"0"="Root\\LEGACY_SRV\\0000"
"Count"=dword:00000001
"NextInstance"=dword:00000001
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT]
"Type"=dword:00000001
"Start"=dword:00000001
"ErrorControl"=dword:00000001
"Tag"=dword:00000005
"ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
52,00,49,00,56,00,45,00,52,00,53,00,5c,00,6e,00,65,00,74,00,62,00,74,00,2e,\
00,73,00,79,00,73,00,00,00
"DisplayName"="NetBios over Tcpip"
"Group"="PNP_TDI"
"DependOnService"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
"DependOnGroup"=hex(7):00,00
"Description"="NetBios over Tcpip"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Linkage]
"OtherDependencies"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
"Bind"=hex(7):5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,54,00,63,00,70,\
00,69,00,70,00,5f,00,7b,00,45,00,42,00,33,00,44,00,36,00,31,00,41,00,42,00,\
2d,00,43,00,30,00,43,00,38,00,2d,00,34,00,38,00,35,00,35,00,2d,00,41,00,37,\
00,45,00,38,00,2d,00,42,00,46,00,38,00,38,00,32,00,36,00,33,00,37,00,32,00,\
30,00,41,00,31,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,\
00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,43,00,36,00,39,00,31,00,43,00,\
30,00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,34,00,35,00,41,00,41,\
00,2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,00,36,00,44,00,33,00,\
37,00,35,00,35,00,36,00,33,00,39,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,\
00,63,00,65,00,5c,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,38,00,34,00,\
38,00,38,00,33,00,35,00,46,00,34,00,2d,00,33,00,37,00,41,00,41,00,2d,00,34,\
00,32,00,44,00,39,00,2d,00,41,00,34,00,45,00,31,00,2d,00,34,00,41,00,46,00,\
32,00,43,00,44,00,44,00,30,00,31,00,37,00,35,00,30,00,7d,00,00,00,5c,00,44,\
00,65,00,76,00,69,00,63,00,65,00,5c,00,54,00,63,00,70,00,69,00,70,00,5f,00,\
7b,00,45,00,38,00,33,00,34,00,42,00,34,00,41,00,38,00,2d,00,37,00,37,00,31,\
00,46,00,2d,00,34,00,31,00,37,00,42,00,2d,00,38,00,33,00,46,00,39,00,2d,00,\
39,00,39,00,39,00,32,00,42,00,38,00,41,00,43,00,41,00,43,00,45,00,42,00,7d,\
00,00,00,00,00
"Route"=hex(7):22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,7b,00,45,\
00,42,00,33,00,44,00,36,00,31,00,41,00,42,00,2d,00,43,00,30,00,43,00,38,00,\
2d,00,34,00,38,00,35,00,35,00,2d,00,41,00,37,00,45,00,38,00,2d,00,42,00,46,\
00,38,00,38,00,32,00,36,00,33,00,37,00,32,00,30,00,41,00,31,00,7d,00,22,00,\
00,00,22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,7b,00,43,00,36,\
00,39,00,31,00,43,00,30,00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,\
34,00,35,00,41,00,41,00,2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,\
00,36,00,44,00,33,00,37,00,35,00,35,00,36,00,33,00,39,00,7d,00,22,00,00,00,\
22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,4e,00,64,00,69,00,73,\
00,57,00,61,00,6e,00,49,00,70,00,22,00,00,00,00,00
"Export"=hex(7):5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,00,65,00,74,\
00,42,00,54,00,5f,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,45,00,42,00,\
33,00,44,00,36,00,31,00,41,00,42,00,2d,00,43,00,30,00,43,00,38,00,2d,00,34,\
00,38,00,35,00,35,00,2d,00,41,00,37,00,45,00,38,00,2d,00,42,00,46,00,38,00,\
38,00,32,00,36,00,33,00,37,00,32,00,30,00,41,00,31,00,7d,00,00,00,5c,00,44,\
00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,00,65,00,74,00,42,00,54,00,5f,00,\
54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,43,00,36,00,39,00,31,00,43,00,30,\
00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,34,00,35,00,41,00,41,00,\
2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,00,36,00,44,00,33,00,37,\
00,35,00,35,00,36,00,33,00,39,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,\
63,00,65,00,5c,00,4e,00,65,00,74,00,42,00,54,00,5f,00,54,00,63,00,70,00,69,\
00,70,00,5f,00,7b,00,38,00,34,00,38,00,38,00,33,00,35,00,46,00,34,00,2d,00,\
33,00,37,00,41,00,41,00,2d,00,34,00,32,00,44,00,39,00,2d,00,41,00,34,00,45,\
00,31,00,2d,00,34,00,41,00,46,00,32,00,43,00,44,00,44,00,30,00,31,00,37,00,\
35,00,30,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,\
00,65,00,74,00,42,00,54,00,5f,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,\
45,00,38,00,33,00,34,00,42,00,34,00,41,00,38,00,2d,00,37,00,37,00,31,00,46,\
00,2d,00,34,00,31,00,37,00,42,00,2d,00,38,00,33,00,46,00,39,00,2d,00,39,00,\
39,00,39,00,32,00,42,00,38,00,41,00,43,00,41,00,43,00,45,00,42,00,7d,00,00,\
00,00,00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters]
"NbProvider"="_tcp"
"NameServerPort"=dword:00000089
"CacheTimeout"=dword:000927c0
"BcastNameQueryCount"=dword:00000003
"BcastQueryTimeout"=dword:000002ee
"NameSrvQueryCount"=dword:00000003
"NameSrvQueryTimeout"=dword:000005dc
"Size/Small/Medium/Large"=dword:00000001
"SessionKeepAlive"=dword:0036ee80
"TransportBindName"="\\Device\\"
"EnableLMHOSTS"=dword:00000001
"EnableProxy"=dword:00000002
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{848835F4-37AA-42D9-A4E1-4AF2CDD01750}]
"NameServerList"=hex(7):00,00,00,00
"RASFlags"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{C691C0B5-085A-45AA-96B5-5AC6D3755639}]
"NameServerList"=hex(7):00,00
"NetbiosOptions"=dword:00000002
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{E834B4A8-771F-417B-83F9-9992B8ACACEB}]
"NameServerList"=hex(7):00,00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{EB3D61AB-C0C8-4855-A7E8-BF88263720A1}]
"NameServerList"=hex(7):00,00
"NetbiosOptions"=dword:00000002
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Security]
"Security"=hex:01,00,14,80,e8,00,00,00,f4,00,00,00,14,00,00,00,30,00,00,00,02,\
00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
00,00,02,00,b8,00,08,00,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,\
05,0b,00,00,00,00,00,18,00,9d,01,02,00,01,02,00,00,00,00,00,05,20,00,00,00,\
23,02,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,20,\
02,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,25,02,\
00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,05,12,00,00,00,00,00,14,\
00,40,00,00,00,01,01,00,00,00,00,00,05,13,00,00,00,00,00,14,00,40,00,00,00,\
01,01,00,00,00,00,00,05,14,00,00,00,00,00,18,00,9d,01,02,00,01,02,00,00,00,\
00,00,05,20,00,00,00,2c,02,00,00,01,01,00,00,00,00,00,05,12,00,00,00,01,01,\
00,00,00,00,00,05,12,00,00,00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Enum]
"0"="Root\\LEGACY_NETBT\\0000"
"Count"=dword:00000001
"NextInstance"=dword:00000001
c:\windows\system32\drivers
srv.sys
5.2.3790.4832 (srv03_sp2_gdr.110217-0526)
mrxsmb.sys
5.2.3790.4883 (srv03_sp2_gdr.110706-0334)
rdbss.sys
5.2.3790.4671 (srv03_sp2_gdr.100224-1541)Hi jenhwa,
Please run
sfc /scannow command to scan all protected system files. Any find?
In addition, please type
Regedit in RUN to open Registry Editor, then follow the path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer
Please right-click the
DependOnService entry, and then click "Modify...".
In the Value data box, please check if just has
SamSSand
Srv services.
In addition, please check the System event log if find relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I want to change the domain name and the server name ( I do not want
mydomain, myserver) while installing
weblogic as an NT service. After installing and starting weblogic from NT
services program, weblogic does not start
But if I start it from the command script, it starts
Thanks
madhuHi,
I could start weblogic as an nt service by changing the name of the
default server and domain. I had to include password in the
installNTservice script.
Thanks
Madhu
Michael Young <[email protected]> wrote in message
news:[email protected]..
Hi.
Please open a case with BEA support.
Thanks,
Michael
m holur wrote:
I want to change the domain name and the server name ( I do not want
mydomain, myserver) while installing
weblogic as an NT service. After installing and starting weblogic from
NT
services program, weblogic does not start
But if I start it from the command script, it starts
Thanks
madhu--
Developer Relations Engineer
BEA Support -
Dbconsole service does not start after renaming Hostname
Hi,
I installed 10g Rel 2 successfully on a Windows XP machine, and then renamed the Computer name (Host name) of the server machine, and now the dbconsole service (for Enterprise manager) does not start up and hence I cannot access the EM through the web browser.
Is there a fixed list of files/directories to rename, if I want to access the Enterprise Manager Console, in such circumstances?
I have already made changes in Tnsnames.ora and listener.ora files. But the service still won't start successfully. It gives a "Service-specific error 2".
ThanksHi,
you also check .
etc/hosts -----> file in windos platform.
and edit above file and try to connect and for agent.
start agent manully
cmd>set oracle_sid=<sid>
cmd>emctl start agent
regards
Taj
Maybe you are looking for
-
I have tried reinstalling software and didn't work. How do I fix this eula error and open up PDF files again?
-
Open a HDR 32 bits per channel file in photoshop elements.
Photoshop elements 4 with a hdr 32 bits per channel file in rgb mode opened and being converted to 8 bits using the built in hdr conversion dialog.
-
Most of the time when I connect my iphone to itunes on my imac it says it cannot sync because it cannot establish a connection with the iphone. If I go to sync it manually it syncs ok. Is this a common problem? I have the latest versions of iphone os
-
Document clearing and creation events (userexits)
Hi, I am looking for some events (userexists) triggered, when a) invoice document is cleared b) down payment (NOT request) document is created. I found some P/S interfaces, but I do not have enough experiences to deside, which one is "the right one"
-
Using PDF Pack to convert a .docx document containing internal hyperlinks
I just used PDF Pack to convert a .docx document to pdf format. The document contained a hyperlink to a bookmark within the document. The text converted OK, and the hyperlinked text was underlined, but not active. Clicking on the hyperlinked text d