QuickTime Streaming through Novell BorderManager

Unable to get QuickTime Steaming to work through Novell BorderManager with HTTP Proxy & NAT.... Have changed QuickTime settings to use HTTP instead of UDP.... Any thoughts for a solution?

Similar Messages

Error message when opening itunes, quicktime streaming failed to load...

I downloaded itunes, installed it, and when I try to open I get the message "quicktime streaming failed to load because it was already loaded" Then it closes. Anyone know what's going on?
Windows XP

okay ... let's try a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

HT3775 Cannot watch QuickTime Streaming Media in Safari/Firefox 10.8.2, any ideas?

On my new Retina MacBook Pro (10.8.2) I cannot watch QuickTime Streaming Movies in Safari nor Firefox. Since there is no preference pane I cannot adapt the streaming prefs ... Thank you Apple!

Hello Gohans
I hope to be able to help otherswith my apple knowledege.
That's what these forums are all about. Glad to have helped you resolve the problem. Over time, I've learned a lot through these forums thanks to very knowledgeable, generous users. And my learning continues! Always something new to understand. Quite a loop.
Please consider marking this post "solved" to the right of my name (you'll need to log-on to the forum). Helpful for others looking for a solved solution to a similar question, also helpful for me.
(hello ~Bee!)
Aloha from Big Island.

When I am listening to the radio (streaming through itunes) my macbook pro will log me out, quitting all the applications I have running (often firefox, word processing, itunes, etc). Why?

When I am listening to the radio (streaming through itunes) my macbook pro will log me out, quitting all the applications I have running (often firefox, word processing, itunes, etc). Why?
It's very frustrating and I don't understand why it happens. It might happen other times, but I notice it the most when I'm streaming the radio through itunes, though I think it's also happened when I'm streaming music or shows from NPR, so I don't actually know if it's an itunes thing, or an internet thing? Or just my computer being stupid? But how can I fix it?
Thanks!

My best guess at this point is a problem wwith 10.5.8
It seems clear to me that sometimes, seemingly randomly, software will access the video card (flash player, quicktime, Safari's HTML5 video player, etc) and it will cause a freeze and then log out.
However - it could just be video card + processor under load.
This didnt happen before 10.5.8 and I'm thinking it's not the new 27" display causing the issue.
I'm going to attempt to find time to revert back to 10.5.0 and then combo update back up to 10.5.7 which may be difficult as our IT is remote and we don't have access to Snow Leopard discs.
I may just have to bring my own in.

UDP Stream -- SDP File w/ QuickTime Streaming Server?

Hi everyone,
I'm trying to help a client who's getting into some more advanced QuickTime stuff than I'm famillair with, and I could sure use some help figuring out a solution for him. Instead of trying to rephrase his question myself, I'll just copy his email to me below:
Question about QTSS. I have played around with Darwin Streaming Server quite a bit but there is one thing I want it to do that it can't. My question is this. Will Quicktime Streaming Server take an unannounced UDP stream that is directed to it and automatically create a SDP file so I can then relay the stream to people. With DSS I have to make a SDP file myself which I don't know how to do yet.
What I'm doing is using an Axis Network camera, sending video out UDP unannounced. I'm doing this so if a network connection goes down the camera will still be sending out video and when the connection comes back up the video will make it through to the server again.
So once it's on QTSS I want to pull 3 different streams of this feed (via the SDP file), one with no modification, the other 2 VLC will request the stream and transcode them and drop the transcoded stream into another QTSS. This second QTSS would be the server for the 2 transcoded streams.
Thanks,
Any ideas? If QTSS can't do exactly what he has in mind, is there another feature that would be similar? Again, any help you might provide would be very appreciated,
Huxley Dunsany
Mac OS X (10.4.6)

I thought I'd bump this message just on the off chance anyone who might have an answer missed it the first time around. Heck, if you've even got a good suggestion as to a better forum to ask it on, I'd really appreciate it!
Thanks, and best wishes,
Huxley

Novell Bordermanager

I am using netgear wireless adapter but recently it has been having troubles keeping a connection, does anyone have any advice how I can fix this?
I have also been trying to access some of my favorite websites at school but every time I try to, I keep running into the Novell Bordermanager. The sites that I am trying to access are not actually bad websites but they have been blocked recently because of... productivity. Does anyone know any loop holes that I could use to get through this?

ws is wrote:
> Can someone please tell me where can I find more information about
> Novell BorderManager 3.9. For example how things work with Novell
> BorderManager 3.9 & stuff like that. I would like to learn about it.
>
> Thank you
> ws_is
>
>
http://www.novell.com/documentation/nbm39/index.html
http://www.novell.com/coolsolutions/...mag/index.html

Is there an updated way of setting QuickTime streaming speed for iChat?

I've been using iChat screen share to help a friend. The first time we tried it, it worked well; the second time, however (same computers), the image of the screen I recieved was suddenly very low resolution (too low for me to see what I'm doing). It sometimes clears up after around 30-40 seconds, but once a window is moved, etc, the problem reoccurs, making the process tedious to the point that I don't think I'd go through this. I saw in a previous community tip that changing the streaming speed in Quicktime can resolve this issue; they specified that this must be done through the Quicktime icon in System Preferences, and not through the standard Quicktime app.. that was for OS 10.5.6; on my OS (10.6.8, and the new QT), Quicktime is now missing from the System Preferences panal : /.. I also saw a user comment on another site saying, "Basically, [the new] QTX lacks the option to pick your codec, frame size, data rate, and so on." So was QuickTime's streaming speed function lost, and do I really need Quicktime to accomplish better image quality for iChat? If it can't be fixed, is there a better screen sharing utility I can get that won't have these problems? Thanks for any help : )..

Hi,
Back before iChat 4 the Video part of iChat chats was based on the reading the app ttok from the Internet speed it could see.
This speed was directly effected by the then System Preferences > Quicktime > Streaming tab setting.
Basically the Automatic Setting was read a 0 (zero) kbps.
The Fastest Setting of Intranet/LAN also got messed up (it would not return a figure iChat could use)
For that reason we used to Suggest that people use the 1.5Mbps T1/Intranet/LAN setting
This limited Video streaming by any app to 1500kbps both as Upload and Download (this is fact a rough figure based on using base 10 rather than the true binary based math involved)
At iChat 4 Apple made iChat see the Automatic setting as 384kbps
This should be fast enough for 4 way Video chats as the Host end. (the person that invites the others)
By Snow Leopard (iChat 5) the Quicktime Setting has gone in System Preferences.
The way iChat "reads" the Internet Speed is different and it is not restricted by Quicktime.
The only way to Cap iChat now is the App Menu > Preferences > Video Section > Bandwidth Limit
Apple state the minimum Internet speed that iChat should have for Screen Sharing is 128kbps
Internet Speeds tends to be based on Binary multiple at lower speeds - 56kbps is max Dial-up Modem speed
128kbps is obviously twice that. The next speed split is like to be 265kbps
Check that you and your Buddy have at least 128kbps as Upload as well as download.
http://www.speedtest.net/
Ideally it should be faster as at that speed you can lose between 10 and 20% in the test and the overheads of running the connection to the ISP
Setting the Bandwidth (in iChat) at 500kbps at both ends can eradicate the variances you can get in slower Internet speeds.
In Snow Leopard Quicktime has become Quicktime X and does have issues playing some Quicktime 7 movies.
This also applies to Lion and Mountian Lion
However there are ways to install the Quicktime 7 Player that will cover the codecs that may not be played.
This info does not apply to iChat though.
8:11 PM Sunday; October 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?

My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?

http://discussions.apple.com/thread/3418045?tstart=60

How do I use multiple cameras to live stream through FME?

I am looking to live stream pool tournaments from multiple angles but don't know what software or hardware I might need. Anybody have any good how to advice or links they might share? I stream through Ustream.tv if that makes a difference. Should I look for something different? Thanks

I am working on getting just the counter working by using
the program posted previously, and I am running into issues. Periodically I get
the error:
Error -200141
occurred at DAQmx Read (Counter DBL 1Chan 1Samp).vi
Possible reason(s):
Data was overwritten
before it could be read by the system.
If Data Transfer
Mechanism is Interrupts, try using DMA. Otherwise, divide the input signal
before taking the measurement.
It seems to work better if I use cascaded counters, but I need timer 0 for
analog channels when I run this code along with the program for the other
measurements.
I have tried averaging, and selecting different values for the millisecond
timer, and these did not seem to have an effect.
I tried different DAQms configurations and "Counter DBL 1Samp" seemed
to work the best.
The program will work for a while and then it will give me the above error
message.
If I use counter 0 as a cascaded counter input, the program runs fine. If I run
this with other analog channels, it errors out because the analog channels use
counter 0.
If I use counter 1 as a cascaded counter input, it seems to work better than a
single channel, but it will still error out with the above error.
If I use only counter 1, I get the error above even faster.
Also, none of the
configurations give measurements outside the While Loop.
The only place I can add a speed dial for the front panel is within the While
Loop.
Is there someway to get the signal to continuously send out of the while loop?
I thought if I could get the signal out of the while loop, I could condition it
anyway I wanted without the program erroring out.
Any suggestions would be much appreciated.
Thank you.
Attachments:
Counter_error.jpg ‏45 KB

Pandora App No Longer Streams Through Car Stereo

Hi,
I have a Alpine iDA-X305 head unit in my car and I used to stream Pandora through my stereo using a plug in connection. I recently did an app update for Pandora and it can no longer stream through my car stereo. A message pops up on my phone and it says that the device is not optimized. I have an iPhone 4 and am running the most up-to-date software.
Anyone have any input on how i can solve this problem?

Most likely the car player is the culprit here. Call their customer support.

Where did the Quicktime streaming server go??

It looks as if the Quicktime streaming server is gone for good - apparently it is not part of the Lion server install, and it can't be found on the Apple web site either. There is a page for it, but it doesn't actually provide any useful information.
Does anyone has any idea what happened to this technology?

Hello! I said... I want the ability to input analogue video into my camcorder so I can continue to transfer VHS and input and record video from other sources. The new HD cameras on the market will not allow you to record video from any source except for the lens.
I have HD cable box. I want to record my HD programs from cable (HBO, Starz, etc) to my camera, download the video to my Mac from the camera and then edit them in iMovie and create professional looking movie DVD's in iMovie.
iMovie HD can work with mini DV HD cameras and HD video. I was not aware of a system requirement for working with HD content.

How do I install Quicktime Streaming Server?

How do I install Quicktime Streaming Server?
Thanks
Mac mini G4 Mac OS X (10.4.6)

The Apple-supported QuickTime Streaming Server only comes with Mac OS X Server. What you need it QTSS's open-source twin Darwin Streaming Server. Download that, open the disk image, and just double-click on the package file to install.

"Quicktime Streaming failed to load because of an unknown error"

iTunes and Quicktime will not load, install, or uninstall because of at some point the popup message "Quicktime Streaming failed to load because of an unknown error" appears. Succesive reboots and removal of SpyBot (which may have denied access to Quicktime because of a registry setting, which of course may still be the cause of the problem...) have not fixed the problem. Any ideas?

I have struggled with the same problem for the last few years and could not find any adequate answers. Being a person who likes to run his PC clean and mean, I had stopped all those Apple Itunes / Quicktime applets and deleted Itunes application as I preferred other Media players & converters. Recently my Nokia 6300 phone suite would send me the same error every song I moved from PC to phone. The clue was that I had chosen Optimised AAC format instead of stock standard MP3. Working on this hunch, I re-activated Apple's Software Update from the Scheduled Tasks items of Control Panel to update Quicktime, Itunes and Safari. Now I have AppleMobileDeviceService.exe, iPodService.exe, iTunesHelper.exe all running and I do not get the error anymore. There is also the Bonjour (DNSResponder.exe) service to be considered. See:-
http://www.tombraiderforums.com/showthread.php?t=122420
http://digg.com/apple/iTunes5Disasters

Playing MMS Stream through Flash

Hello
i want to Playing MMS Stream through Flash , i have my own
server and streaming video / audio from it in the protcol MMS
as www.mysite.com:8080 and mms://www.mysite.com
how i playing the stream in the Flash ?? is this by action
script ?
thanks

I am trying to do this also since WMP 11 no longer supprts
mms://. Is this possible?

Quicktime Stream with rtsp and poster.mov

Hi...
I'm using Wordpress and I can't seem to get quicktime streaming to work. I've used the code they provided (which you'd THINK would work but it's not. What I'm putting in is (3 different ways/trys to stream the same file):
<embed src="http://alexissdawn.com/postermovs/poster.mov"
href="rtsp://streaming.alexissdawn.com/streaming.alexissdawn.com/win98.mov"
width="200" height="240" target="quicktimeplayer"></embed>
<embed src="http://alexissdawn.com/postermovs/poster.mov"
href="rtsp://streaming.alexissdawn.com/streaming.alexissdawn.com/win98.mov"
width="200" height="240" target="myself"></embed>
<OBJECT CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"
WIDTH="320"
HEIGHT="240"
CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab">
<PARAM name="SRC" VALUE="http://alexissdawn.com/postermovs/poster.mov">
<PARAM name="QTSRC" VALUE="rtsp://streaming.alexissdawn.com/streaming.alexissdawn.com/win98.mov">
<PARAM name="AUTOPLAY" VALUE="true">
<PARAM name="CONTROLLER" VALUE="false">
<embed src="http://alexissdawn.com/postermovs/poster.mov"
qtsrc="rtsp://streaming.alexissdawn.com/streaming.alexissdawn.com/win98.mov"
width="320" height="240" target="myself" controller="false" autoplay="true">
</embed>
</OBJECT>
None of them work and they screw up the layout of my site horribly so I've had to remove the entry. When I look at the coding for it, it changes it to just this:
<object width="320" height="240" classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" codebase="http://www.apple.com/qtactivex/qtplugin.cab">
<param name="SRC" value="http://alexissdawn.com/postermovs/poster.mov" />
<param name="QTSRC" value="rtsp://streaming.alexissdawn.com/streaming.alexissdawn.com/win98.mov" />
<param name="AUTOPLAY" value="true" />
<param name="CONTROLLER" value="false" /></object>
Can anybody help me?? I just need some simple code to stream some MOV files on my site. Any help ASAP would be GREAT!! Thanks in advance...

I�ve got the exact same problem. Any help would be appreciated.

QuickTime Streaming through Novell BorderManager

Similar Messages

Maybe you are looking for