QuickTime system error: number = -2015 -16 ?!?!?!
Howdy!
I have installed, uninstalled, and reinstalled quicktime (newest stand alone AND iTunes) several times and I keep getting this error in two dvd authoring programs. The problem occurs when importing a mp4 file. So far it has happened continuously in DVDit and MyDVD.
Any suggestions, please????
Thanks!
They were encoded with Nero 7 Recode from multiple home movie dvd's. They open in QuickTime itself; they just won't import into the dvd authoring software.
Athlon x2 4800+ Windows XP
Athlon x2 4800+ Windows XP
Similar Messages
-
How to Fix the following Encore Error: "Quick Time system error: number = -1"?
Has anyone seen this error before in Encore? Quick Time system error: number = -1 How do you fix it? I get it while burning a DVD. I have the latest version of Encore and the menu I am using was exported from After Effects.
Thanks so much,
HeatherWhen I start Encore I always receive a warning that I do not have Quicktime installed
Since I do not use QT in any way, I ignore the warning and Encore works just fine
I also do not use menus from AE, so there MAY be something to look at
Does Encore work properly if you use one of the built-in menus? -
I just bought and uploaded quicktime pro so I could download a video project from a collaborator on vimeo and keep getting error number 2015 when I try to download anything. Please Help
Hello,
Error -2015 means Invalid Time.
See http://aeroquartet.com/movierepair/quicktime-errors
QuickTime reports invalid duration when media duration doesn't match timeline specified by track edit list. This is almost always to due the last frame display time being different from frame decode time. Applying a correction to last frame display time usually fixes the problem.
If you provide the link to the video, maybe we can help fixing that.
You can also ask your collaborator to cut the first 3 to 4 frames and last 3 to 4 frames from the video and resave it.
-- BJ -
Error while releasing PO : System error: block object EKKO, Key PO Number.
Dear All,
I am getting error while releasing PO : System error: block object EKKO, Key PO Number.
Please help to resolve.Hi Friend,
How the issue is resolved, because i am facing the same issue, while positing Service entry sheet.
If you can give us solution, it will be more useful and more appreciated
REgards
RS -
Can't Uninstall/Install Quicktime error number: 0x80040707
I am also having probelms with quicktime. I went to uninstall/reinstall it and have had no luck. When I run the uninstall shield, it starts and then before it goes farther than half way loaded it disappears.
I tried everything listed in the post below mine with no luck but I noticed that I have a different error code.
Also, I tried to install the standalone 7.0.4, it installs and then before it completes, when I click finish is comes up with this error:
Error Number: 0x80040707
DLL Function Call Crashed: QT Install code.Quicktimepostinstallproc
Setup will now terminate
I can't do anything with quicktime: run updates or use the plugins: nothing comes up or it restarts my firefox. What do I do? Really appreciate any help, I'm useless technologically. Thanks
Inspiron 700m Windows XPhi ChummyGirl!
Error Number: 0x80040707
DLL Function Call Crashed: QT Install
code.Quicktimepostinstallproc
in this context, that often means the installation
configuration information of the QuickTime has been
compromised.
here's what we'll try first.
Download and install the Windows Installer CleanUp
utility. then use it to clear any existing
QuickTime installation configuration
information from your PC:
Descrip
tion of the Windows Installer CleanUp Utility
next use the QuickTime component of the
complete uninstall instructions in the following
document as a guide to a manual removal of leftover
QuickTime program files and folders.
Trouble installing iPod, iTunes, or QuickTime
software in Windows
once we've got all the existing QuickTime scraped
away, let's try a standalone QT 7.0.4 reinstall,
taking a few additional precautions.
download and save a copy of the QT 7.0.4 standalone
installer to your hard drive. (we'll run the install
from there rather than online.) switch off
antivirus and antispyware applications prior to the
install.
Quicktime 7.0.4 Standalone Installer
does that install go through okay?
love, b
hi ChummyGirl!
Error Number: 0x80040707
DLL Function Call Crashed: QT Install
code.Quicktimepostinstallproc
in this context, that often means the installation
configuration information of the QuickTime has been
compromised.
here's what we'll try first.
Download and install the Windows Installer CleanUp
utility. then use it to clear any existing
QuickTime installation configuration
information from your PC:
Descrip
tion of the Windows Installer CleanUp Utility
next use the QuickTime component of the
complete uninstall instructions in the following
document as a guide to a manual removal of leftover
QuickTime program files and folders.
Trouble installing iPod, iTunes, or QuickTime
software in Windows
once we've got all the existing QuickTime scraped
away, let's try a standalone QT 7.0.4 reinstall,
taking a few additional precautions.
download and save a copy of the QT 7.0.4 standalone
installer to your hard drive. (we'll run the install
from there rather than online.) switch off
antivirus and antispyware applications prior to the
install.
Quicktime 7.0.4 Standalone Installer
does that install go through okay?
love, b
hi nior
Error Number: 0x80040707
DLL Function Call Crashed: QT Install code.Quicktimepostinstallproc
this is the error msg i get.and i went thru ur previous posts and did everything it said.the problem is still there.and as u stated in one of ur posts,itunes was working perfectly until i installed a video codec.i donno what happened after that.i tried restoring my computer to a previous setting.still it doesnt solve the problem.
ur advice will help me solve this mess.
thanx
lucifer
ibm t43 Windows XP Pro -
Error Number: 0x80040707 while uninstalling quicktime
I'm trying to uninstall quicktime so that i can do something about my itunes which isn't working properly (love how everything is connected huh?) Newayz i get that error and says that
"DLL function call crashed: QTInstallCode.Quicktime...."(it goes off the edge of the screen)
little help please. Thanks+I have iTunes loaded on my administrator account. I want to load iTunes on my sons account so he can use his new iPod. I made his account an administrator account so we could load iTunes and have his iPod recognized on this computer. Installation stops with "Error number:0x80040707 while loading iTunes" displayed. When I click OK the next window says "Access Denied" and we're done.+
Gosh, but it's been a long time since I've seen that error message code in this context ... (You've presumably got an iTunes version 6.0.5.20 or lower installed in your User account?) But it was certainly possible to get one flavor of the 0x80040707 (there were a bunch of different varieties, distinguished by the details of the error message text) if you had an older version of iTunes installed in one user account, and then tried to install a higher version in a different user account.
Porcupine is correct here. You don't have to install iTunes in a different user account to use it there, so long as it is already installed in a different one. There's details here:
How to use multiple iPods with one computer
If you have to upgrade iTunes to use the new ipod, I'd first try doing the upgrade from inside your account rather than his. Does that get you past the 0x80040707? -
After installing the notified update I am unable to send e-mails (using Outlook Express on Windows XP) as my system is now thought to be Unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F") Everything was working fine immediately before I installed the update. Can anyone (pleeeease) tell me where Flash has changed my security settings as I have looked at the setup, but everything looks okay. Thankyou!
Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.
-
Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the Creative Cloud isn't working any more.
I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not shutting down Kaspersky. Help Please!!Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the Creative Cloud isn't working any more.
I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not shutting down Kaspersky. Help Please!! -
Will ASE system defined error number fall into user defined error numbers starting from 20000?
The maximum error number in sysmessages:
select max(error) from master.dbo.sysmessages
ON ASE 15.0.3
column1
19975
ON ASE 15.7
select max(error) from master.dbo.sysmessages
column1
19999Hi Siddhartha,
I don't expect ASE to start using error numbers in the user-defined range. I'm part of the group that reviews new messages, and conserving the shrinking pool of available numbers is certainly a concern of ours. We are actually still some ways away from running out of numbers.
The error numbers are actually a concatenation of a major family number (the 100s values)
and minor numbers 0-99 in each family. There are many families of errors that have unused values, one possibility is that we could use those unused values for errors that don't really belong in that family. Another thing we can do (though it would have to be in a major release of both open client and ASE) would be to introduce another mechanism that might work just the same as error messages but be called, say, "notifications" or "faults' (though that term is already used by checkstorage.
There actually already exist two such families of messages, one called "errors" and the other called "messages". You can see this when configuring a shared memory dump, both are possible dump conditions. "Errors" show up in the errorlog displaying the message number, severity, and a state value, while "Messages" just display text and support has to look up the associated message number in the ASE sourcecode. (Not all text messages in the log are actual messages like this, some are just text that gets printed that one can't configure a memory dump on.)
Cheers,
-bret -
After Effects CS5 and CS6 Quicktime Rendering Error
Hi there
Recently I have a challenge with rendering in Quicktime output, one day my AE just stopped rendering my videos in Quicktime formats, specially "Photo Jpeg", I had AE CS5.5 on that moment. I shift to CS6 and yet the problem exists. The error number is: -1610153464 and for better understanding here is a screen capture of the error:
I went through all the existing discussion and forums but sadly no one was helpful, I tried evrything and no result. Surprisingly rendering in other formats are perfectly fine and fast, only Quicktime seems has problem.
Please someone help me out here, it just stops me from my daily works and projects, thank you so much.I shift to CS6 and yet the problem exists.
How can you? It's not even released yet.
Please someone help me out here, it just stops me from my daily works and projects, thank you so much.
Again, how can it? If you are already using CS6, you are either using a prerelease version and discussions about bugs and issues have no place on a public forum or on the other hand you are simply using it illegally. Everything else - yes, that's a Quicktime error, but since you did not provide any more information, nobody can help you. we need to know exact settings, system specs, file storage options, Quicktime version etc.
Mylenium -
Can not upgrade. "unexpected system error" [SOLVED]
I seem to have trouble upgrading and synchronizing the databases. I get this output when attempting 'pacman -Syu' and 'pacman -Syy':
:: Synchronizing package databases...
error: failed to update testing (unexpected system error)-----------------] 0%
error: failed to update core (unexpected system error)--------------------] 0%
error: failed to update extra (unexpected system error)-------------------] 0%
error: failed to update community (unexpected system error)---------------] 0%
archlinuxfr 25.0K 60.7K/s 00:00:00 [#####################] 100%
compiz-fusion 3.6K 26.0K/s 00:00:00 [#####################] 100%
I have tried searching for a solution here but it seems that no one else is experiencing this issue (unless I over looked a post). I see nothing about this in the news section of the home page so it might not be a common issue.
This is what my pacman.conf file looks like:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
[testing]
Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/i686
[compiz-fusion]
Server = http://compiz.dreamz-box.de/i686
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Is there a log file I can check to see what happened exactly or is there something that can be done for me to sync the databases again. Any help is appreciated.
Last edited by vytalelementz (2008-10-13 13:45:48)Here is my mirrorlist:
# Arch Linux repository mirrorlist
# North America
# - United States
#Server = ftp://ftp.archlinux.org/$repo/os/i686
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
Server = http://archlinux.unixheads.org/$repo/os/i686
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
Server = http://mirror.neotuli.net/arch/$repo/os/i686
Server = http://mirror.rit.edu/archlinux/$repo/os/i686
Server = http://mirror.umoss.org/archlinux/$repo/os/i686
Server = http://schlunix.org/archlinux/$repo/os/i686
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
# South America
# - Brazil
Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# Europe
# - Austria
Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
# - Belgium
Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Estonia
Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
Server = http://mir.archlinux.fr/$repo/os/i686
Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.rez-gif.supelec.fr/Linux/archlinux/$repo/os/i686
# - Germany
Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
# - Great Britain
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
# - Greece
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Ireland
Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
# - Italy
Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
# - Norway
Server = http://arch.likbilen.com/$repo/os/@carch
# - Poland
Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = http://unix.net.pl/archlinux.org/$repo/os/i686
# - Portugal
Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
# - Russia
Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
Server = http://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
Server = http://server.elsistech.com/archlinux/$repo/os/i686
# - Ukraine
Server = ftp://hell.org.ua/archlinux/$repo/os/i686
Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
# Asia
# - Israel
Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# - Vietnam
# Domain name is ftp.indochinalinux.com but there are frequent DNS problems
Server = ftp://202.78.230.5/archlinux/$repo/os/i686
# Australia
Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686 -
Background Processing? how schedule job for "System Error" Message .
Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
● Archiving of messages processed successfully
● Deletion of messages that are not to be archived
● Restarting of messages with errors
● Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
YaningBackground Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
● One session to write the messages to the archive
● One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM -
Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays. -
How Can I Fix A QuickTime Codec Error?
How Can I Fix A QuickTime Codec Error?
I have several movies from 2008 that are labeled as .mov but I now get a QuickTime error saying "The document "XXXXXX" could not be opened. A required Codec isn't available."
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
If I click on the Thumbnail Preview "It" runs.
How can I fix this?
TOP image is the Error message.
BOTTOM image is the Thumbnail Preview info.
I've checked out "Tell Me More" and have not found a solution.How Can I Fix A QuickTime Codec Error?
The basic work flow is to determine which codecs were used to create the non-playing file and then check to see if these formats are supported by your current system codec component configuration.
If the files will open in one of the QT player app, the open the inspector window to see which codecs were used to create the original file as seen here...
or here in the "Format" entry...
Or, if you have QT 7 keyed for "Pro" use, you can open the "Properties" window to gain even more information as demonstrated here...
if you file will not open in either of the QT Player apps, then you can try opening the Finder "Get Info" window for the file,
use a third-party media player that will open the file, or
use a dedicated media information utility to learn this information....
Once you know what codecs were used to create the file, post back with this information so we can deterine if the file should be natively supported by your Mac OS X install, requires an Apple Pro editing codec normally installed by the editor app, or requires a third-party codec which the user must supply.
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
Your information does not indicate whether or not the files actually played on the current system or were transferred from a different system which was properly configured for playbac, whether or not you recently upgraded your operating system/modified your codec component configuration by adding or deleting any codecs, whether your compound "Stuffing" of the files created corruption, etc.
As to MOV files the selves, this extension just implies the data was placed in the QT generic file container and the actually data could be of any compression format thathat was compatible with the codec component configuration for the system on which the files were created and could include natively supported system codecs, pro editing codecs, and/or third-party proprietary or hybrid codecs. (I.e., this is why we may need more information regarding the individual non-playing files.)
If I click on the Thumbnail Preview "It" runs.
f you are referring to QuickLook (QL) then the technology is different than QuickTime (QT). In the former case, the system is playing representative data but not actually opening the file as QT does. Thus, there is always the possibility that the problem is in the file structure (atom) information. For instance, suppose someone merely changed the MOV file extension in the Finder rather than actually copying data to a real MOV file container. Then it is possible that the QT player app may be searching for a codec that is not supposed or expected to be supported in the MOV file container and, not finding it, issues the erroneous codec error message—especially since you did not inticate the source of the file you are trying to play or, in some cases, which QT player is now not playing the file.
In short, there are several possibilities here and not enough specific information. -
System error in opening a query
hi guys,
this is the error i'm getting when opening this query which i need for my CR
Abort System error in program in SAPLRR12 and form cell_fuellen_acell-01
Diagnosis:
This internal error is a targeted termination since the program has an
incorrect status.
what is needed to be done here
Your help will be rightly appreciated
ThanksHi Vj,
Please check the SAP notes as below, which seems to be relevant for your issue.
Assign points it useful.....
Symptom
There are errors in Business Explorer components such as Analyzer, Browser, Form Reporting, Web Application Designer, Query Designer, Map, OLE DB for OLAP Provider
Solution General information
This note contains information about BW 3.0A front end patch 3. Here, you will find the most important information on:
Installation
Error corrections
New features
Additional general information that is not specifically for this BW front end patch.
Procedure
Downloading BW front end patches via FTP from sapserv
Downloading a BW front end patch via Online Correction Support (SAPnet)
Preparing the Installation Server
Checking the Installation Server
Installation on PC
Checking the PC
Problems during the installation of the BW front end Patch
Distributing a patch per script (for administrators only)
Installation
During the installation of the BW front end patch, note the following:
(This area is constantly updated)
The BW 3.0A front end patch 3 is based on the SAP GUI 6.10 Presentation CD 1 (6.10 Final Compilation 3, material number 50051811) and the SAP GUI 6.10 patch 12 or higher.
The BW 3.0A front end patch 3 contains all files, to convert a BW 2.0B/2.1C front end into a BW 3.0A front end.
The BW 3.0A front end is downward-compatible to BW 2.0B/2.C.Thus, it can also be used on BW 2.0B/2.1C backend systems.
When you use the Web Application Designer, implement at least BW 3.0A Support Package 03 (see note 425995).
Error corrections
This BW front end patch corrects the following errors in particular:
in SAP Business Explorer Analyzer
Displaying document links on filter cells and text elements
Improved performance for low-speed connections (WAN)
Bug:Incorrect language when starting documents in the Web browser (refer to note 450200)
Bug:Import of missing styles does not import the color palette anymore (refer to note 450194)
Bug:Various problems during the server logon as of Release 2.0 (incorrect list of Goto destinations, incorrectly indented hierarchy symbols...)
Bug: Starting jump destinations in the Web does not work
in BEx Query Designer
The system does not correctly interpret characteristics that were selected as being unique in each cell and when it checks these characteristics, it mistakenly reports them as being defined non-uniquely.
After you called the cell editor, you had to press the toolbar buttons twice to call the required function.
In the cell editor, you could change the formula cells but not the formulas of the columns or of the rows because the system displayed all references to other columns or rows as 25 digit numbers.
When you use Save as ... for queries with formula cells, these cells are not copied.
When you used the Save as ... function for queries with cells, the copied query sometimes displayed the message "Brain 299 SAPLRRI2 Form CELL_FUELLEN_ACELL-01-" when it was executed.
When you used the Save as ... function for queries with formula cells, these cells were not copied.
in Variable Editor
Formula variables that were replaced with the "To" value in intervals, were displayed without the "To" selection when you changed them.
in SAP Business Explorer Browser
Drag&Drop of Japanese file names on Japanese WinNT computers is now supported
Temporary files are automatically deleted when the BEx Browser is exited
New features
New features delivered with this BW front end patch:
SAP Business Explorer Analyzer
Delete function in dialog "Open -> Views"
Displaying documents for text elements and filter values
Now the BW front end is installed in a separate program folder in the start menu. The folder is called 'Business Explorer'.The setup only allows you to change the name of the folder of the SAP front end.
Procedure
1. Downloading the BW front end patch via FTP or SAPnet
2. Preparing and checking the installation server
3. Installing and checking on the PC
Note that you cannot install a BW front end patch directly on a PC (also see the 'Distribution of a patch by script' section).
The check of every step with SAPBEXC.XLA avoids unnecessary subsequent problems.
Downloading BW front end patches via FTP from sapserv
Downloading patches from the sapserv is described in note 96885, "Downloading a front end patch from SAPSERVx".
The BW 3.0A front end patches and the SAP GUI 6.10 patches are in the directory
sapservX/general/frontend/patches/rel610/Windows/Win32
The file name of the BW front end patch is
BW30A_n.EXE (where 'n' is the number of the BW front end patch)
The file name of the SAP GUI patch is
GUI610_n.EXE (where 'n' is the number of the SAP GUI patch)
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Downloading a BW front end patch via Online Correction Support (SAPnet)
You can also download BW front end patches in the SAPnet.The URL for the SAP Online Correction Support is:
http://service.sap.com/swcenter-main
After you select SAP BW/SAP BW 3.0A/Binary Patches/SAP GUI for Windows 6.10/Win32 in the tree on the right side, the SAP Download Area appears on the left side.
Here you can select BW30A.EXE and, if necessary, GUI610.EXE for downloading.
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Preparing the Installation Server
The installation of patches on the installation server is described in note 361222. Follow the instructions in this note.
A BW front end patch contains all files from the previous patches, so that you only need to install the latest patch.
Checking the Installation Server
Note 197460, "BW front end Checktool sapbexc.xla", describes how easily and quickly you can check the installation server.
Installation on PC
The BW front end patch is installed by executing the SAP GUI setup.In the setup, you must select the BW add-ons component to install the BW front end.
See also the section distribution of a patch per script.
Checking the PC
Note 197460, "BW front end Checktool sapbexc.xla", describes how simple and fast the local installation checks a PC
The local execution of SAPBEXC.XLA is necessary if you sent problems to the SAP Support (see note 142705).The status of a PC can be checked with the result of SAPBEXC.XLA.
Problems during the installation of the BW front end patch
If problems occur during the installation of the BW front end patches, you should install the BW front end patch again and use the following method for this:
First, remove the BW front end with "Remove" menu option under "SAP front end" from your local PC.
Afterwards you can install the front end programs again with the setup program of your setup server.The setup program has been delivered with the front end CD.You must have administrator rights on the local PC.During the setup, no other programs (for example, Excel) should run.
Certain programs save information on OLE components in special files.These files are not updated automatically during a new installation, therefore, when you change the OLE component during the installation, old information may remain in the system.We recommend you delete all files with the extensions ".EXD" and ".OCA" before you carry out the new installation.
Distributing a patch per script (for administrators only)
There is a large number of products for the distribution of software (for example, Microsoft SMS, IBM Tivoli, NetSupport NetInstall), so that no individual Support is possible when you use SAP and BW.There are two general notes about the front end installation (153341 and 194859), to which the system also refers.
The following remarks are intended for administrators who want to distribute a BW front end patch with such a software.
A BW front end patch consists of several files in different directories. These directories correspond to the directories on the installation server or on the CD.The files are usually distributed into the following directories on the local PC:
c:\program files\common files\sap\system
c:\program files\sappc
c:\winnt\system32 or c:\windows\system
In the sapbexc.xla file on the "Version" tab, there are notes about where the file must be copied to and whether it must be registered.
For the preparation of a script, first you should make a normal installation on a local PC from the installation server which must be checked with sapbexc.xla (see note 197460).Afterwards you can localize the corresponding directory of a file using this PC.In general, each DLL and each OCX must be registered if it can be registered.After the installation per script, a deinstallation may no longer work, therefore, before registering a file with regsvr32.exe <Path\File>, you should execute the script for an unregistration with regsvr32.exe /U <path\file>.
Currently, the sapbexc.xla checktool may not be able to recognize certain installation errors (copy without registrations) (see note 206609).
SAP offers support for problems with incorrect scripts for distributing patches.
Best Regards,
DMK
Assign Points if it helps....
Maybe you are looking for
-
Greetings: I am running into problems trying to successfully run PSE 8 on an iMac. I have tried installing from the CD, a trial version download and have repeated uninstall and re-install thrice atleast with the same issues. When I organize my pict
-
How to connect projector to macbook pro
My company recently purchased a Samsung Pico DLP Projector to use with the office macbooks. There were a bunch of different connections, but none were compatible with the macbook. It looks like we might have purchased the wrong apple adapter cable. D
-
Hello, iDVD quits on me after rendering the movie and I think it's because of a Quicktime slideshow I exported from iPhoto with music. I thought it was the HD going to sleep... but I made sure everything, displa and HD is set to NEVER sleep! Could it
-
Change emergency restart to external optical drive?
My four year old emac has had increasingly more frequent incidents where there is no display after restarting. I am quite adept at resetting the PRAM. However, this last time, nothing worked: I reset the PRAM; reset firmware; pressed the reset button
-
Unfortunately, I keep getting the error "can not connect to iTunes. Code:0" I've tried rebooting, signing out of my apple ID, can someone please help or advise me on what to do? Many thanks, Ryan