Quicktime Unavailable Error

I was running iTunes 9 on my PC and it said there was a new version. So i went to the Apple website and downloaded the new iTunes 10 with Quicktime for Windows. I ran the setup file and it said my installation was finished. I tried to run iTunes after that but iTunes keeps showing the error "Quicktime Unavailable : Quicktime was not found. Quicktime is required to run iTunes. Please uninstall iTunes, then install iTunes again." I have tried this multiple times with the same result everytime. Please help! It was working perfectly before and now its not. Also whenever the error message showed up the first time I clicked on the Quicktime shortcut on my desktop and it ran fine.

I have same issue. Called support twice. Works after install once and then get same Quicktime Unavailable error again and again. Uninstalled and installed several times. If anyone knows a fix it would be greatly appreciated.

Similar Messages

Quicktime Failed To Initialize (Error 2096) Quicktime unavailable!?!

I Have An Old 4th generation 40 gig ipod and a dell e521 pc. I have only recently had internet access, before I typed everything by hand onto my itunes program on my computer. I Want to buy a new ipod classic, but I'm Not sure if it would have been compatible with my outdated itunes program. So I Tried to download the newest verision of itunes and I Thought it was sucessfull, but after I Restarted my computer and attempted to open the newly downloaded itunes, I keep getting this error message that reads Quicktime Unavailable: Quicktime failed to initialize (error 2096)!?! i thought quicktime and itunes were being downloaded together. what am I Doing wrong? Thaks.

I had opened the QuickTime FOLDER Properties and the iTunes FOLDER Properties, which is why I did not see a Compatability tab. When I went into the folders, then into the files, I found that QuickTime was not set to Compatability Mode, but iTunes was set to run compatable with Windows 95. I unchecked the box. It appears that iTunes will now launch on my computer.
Thanks very much. You have brought some joy to my day.

When I click on iTunes icon I get: QuickTime Unavailable

When I click on iTunes icon I get: QuickTime Unavailable
QuickTime failed to initialize (error -2093).
QuickTime is required to run iTunes. Please reinstall iTunes.
I have reinstalled ten thousand times and still it gives me the same error. Please someone help me!!!
HELP!!

Repaired permissions on your computer with Disk Utility?

3x Crash Service unavailable Error

I'm experiencing an Error that seems to concern quite a lot of user, but no real fix seems to appear. Compressor used to work fine once, but now every encode fails (tried a variety of different settings) and gives the ominous 3x Crash Service unavailable Error. The Batch Log displays 'service-unavailable' messages. It may be due to a Leopard Update, due to HP Printer software or even Flip4Mac, i couldnt say which. All safe mode/ permission reset, Compressor and Qmaster Reinstalls failed me up to now, so maybe anyone has some pointer as to what I'm missing...
Thanks!

Not sure if this will help, but I had this problem, I solved it by removing Perian (the lovely app that allows Quicktime to play almost any file).
Once working I've reinstalled Perian and everything is fine.

Quicktime Unavailable in FireFox ?

I am running Windows XP Prof... and FireFox 1.5.0.7. Whenever I go to a site that requires quicktime I get the following error:
QuickTime Unavailable
The QuickTime Plug-In requires the QuickTime System extension version 5 or later.
QuickTime is available from http://www.apple.com/quicktime.
I uninstalled and re-installed QT 7.1.3 and still the same error.

I don't see anywhere in FirefoxforWindows/Options to enable QuickTIme.
Where do you enable Quicktime in Firefox for Wimdows?
G4 iMac Mac OS X (10.3.9)

I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
Customer

Hi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Outlook 2010 "Your automatic reply settings cannot be displayed because the server is unavailable" error

Hi,
We recently introduced a Exchange 2010 server into our Exchange 2003 enviroment but had to stop migrating users over to it after it became appartent that users using Outlook 2010 could not switch on their Out Of Office, getting an "Your automatic reply settings
cannot be displayed because the server is currently unavailable" error. However users on the new 2010 can set OOF if they use OWA or Outlook 2003!
Running the Test E-mail AutoConfiguration shows no errors with the Log tab showing Autodiscover succeeded and the Results tab showing all the correct values, including a OOF URL of
/Autodiscover/Autodiscover.xml">https://<servername>/Autodiscover/Autodiscover.xml into IE gives a XML file with a 600 error code.
I have looked at loads of 'solutions' on the Internet but cannot get this working, anyone have any suggestions?
Thank you,
Craig

Please verify IIS
settings:
======================
On Exchange CAS
server, open IIS console,
Go to default web site, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click Autodiscover, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click EWS, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click OAB, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Please run IISRESET command to load the changes.
Thanks.
Tony Chen
TechNet Community Support

How Can I Fix A QuickTime Codec Error?

How Can I Fix A QuickTime Codec Error?
I have several movies from 2008 that are labeled as .mov but I now get a QuickTime error saying "The document "XXXXXX" could not be opened. A required Codec isn't available."
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
If I click on the Thumbnail Preview "It" runs.
How can I fix this?
TOP image is the Error message.
BOTTOM image is the Thumbnail Preview info.
I've checked out "Tell Me More" and have not found a solution.

How Can I Fix A QuickTime Codec Error?
The basic work flow is to determine which codecs were used to create the non-playing file and then check to see if these formats are supported by your current system codec component configuration.
If the files will open in one of the QT player app, the open the inspector window to see which codecs were used to create the original file as seen here...
or here in the "Format" entry...
Or, if you have QT 7 keyed for "Pro" use, you can open the "Properties" window to gain even more information as demonstrated here...
if you file will not open in either of the QT Player apps, then you can try opening the Finder "Get Info" window for the file,
use a third-party media player that will open the file, or
use a dedicated media information utility to learn this information....
Once you know what codecs were used to create the file, post back with this information so we can deterine if the file should be natively supported by your Mac OS X install, requires an Apple Pro editing codec normally installed by the editor app, or requires a third-party codec which the user must supply.
These movies ran in QuickTime just fine until about a month ago.
All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
Your information does not indicate whether or not the files actually played on the current system or were transferred from a different system which was properly configured for playbac, whether or not you recently upgraded your operating system/modified your codec component configuration by adding or deleting any codecs, whether your compound "Stuffing" of the files created corruption, etc.
As to MOV files the selves, this extension just implies the data was placed in the QT generic file container and the actually data could be of any compression format thathat was compatible with the codec component configuration for the system on which the files were created and could include natively supported system codecs, pro editing codecs, and/or third-party proprietary or hybrid codecs. (I.e., this is why we may need more information regarding the individual non-playing files.)
If I click on the Thumbnail Preview "It" runs.
f you are referring to QuickLook (QL) then the technology is different than QuickTime (QT). In the former case, the system is playing representative data but not actually opening the file as QT does. Thus, there is always the possibility that the problem is in the file structure (atom) information. For instance, suppose someone merely changed the MOV file extension in the Finder rather than actually copying data to a real MOV file container. Then it is possible that the QT player app may be searching for a codec that is not supposed or expected to be supported in the MOV file container and, not finding it, issues the erroneous codec error message—especially since you did not inticate the source of the file you are trying to play or, in some cases, which QT player is now not playing the file.
In short, there are several possibilities here and not enough specific information.

Portlet unavailable error in Webcenter application

I have developed a portlet application by using wsrp standand-based java portlet in the windows environment. There is no problem when I deployed the application to the preconfigured webcenter oc4j in JDeveloper 10.1.3.3.0.
But when I deployed it to the webcenter suite which is also installed in the windows, I have got portlet unavailable error.
I have already used the predeployment tools to change the portlet url endpoint so that it points to the webcenter portlet producers.
<!--Unable to get portlet response (Internal Error) for portlet binding ParameterFormPortlet1_1oracle.portlet.client.container.PortletRemoteException: oracle.portlet.server.container.InvalidRegistrationException: oracle.portlet.wsrp.v2.InvalidRegistrationException: oracle.portlet.wsrp.v2.soap.InvalidRegistration
     at oracle.portlet.client.techimpl.wsrp.WSRPBaseTerminalPipe.processException(WSRPBaseTerminalPipe.java:37)
     at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.execute(WSRPGetMarkupPipe.java:192)
     at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.pre(WSRPGetMarkupPipe.java:55)
     at oracle.portlet.client.service.pipeline.PipeContext.internalExecute2(PipeContext.java:519)
     at oracle.portlet.client.service.pipeline.PipeContext.internalExecute(PipeContext.java:406)
     at oracle.portlet.client.service.pipeline.PipeContextRunnable.run(PipeContextRunnable.java:23)
     at edu.emory.mathcs.backport.java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:431)
     at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
     at oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:398)
     at oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:423)
     at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.portlet.server.container.InvalidRegistrationException: oracle.portlet.wsrp.v2.InvalidRegistrationException: oracle.portlet.wsrp.v2.soap.InvalidRegistration
     at oracle.portlet.wsrp.v2.ServerToWSRPv2.getMarkup(ServerToWSRPv2.java:13574)
     at oracle.portlet.client.connection.wsrp.ActivityServerWrapper.getMarkup(ActivityServerWrapper.java:1382)
     at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.execute(WSRPGetMarkupPipe.java:119)

Have you tried deploying the portlet to the application server, consume this portlet producer in your development environment (JDeveloper), and deploy the application without re-wiring the portlet producer connection?
This approach may take us closer to the problem.
Also, a full stack trace would be helpful too.
Peter

Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
VM: Windows Server 2012 R2 with installed Active Directory Domain Services
When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

Hello Aleksandr,
There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
a multihomed domain controller.
Active Directory communication fails on multihomed domain controllers
http://support.microsoft.com/kb/272294/
Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
configure a DC with registry mods:
http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
7 Reasons not to Make Hyper-V a Domain Controller
http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
Domain Controller as Hyper-V host
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
Networking?
I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
the host OS ping/communicate with the DC virtual machine?
If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
Hyper-V Server VLAN Network Configuration
https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv
Recommendation:
Why not just create another VM DC?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

HTTP 503 Service Unavailable Error in SAP XI 3.0

Hi All,
I am doing a simple File -> File scenario which picks up a .txt file from a folder and post it to the same folder .My file is getting picked up.But I am getting an error
<SAP:Stack>HTTP response contains status code 503 with the description Service Unavailable Error when sending by HTTP (error code: 503, error text: Service Unavailable)</SAP:Stack>
I have done a cache refresh to resolve this error. But then my error is MAPPING PROGRAM NOT FOUND.When I retry I am getting the HTTP 503 error.
Please suggest any solution for the same .
Thanks,
Tiny

Look similar thread to resolve your problem
Error in Call Adapter (IDOC->XI->FILE)
XI Server Malfunction:Error in Receiver Adapter
Http* Errors in XI
Please can you look at note: 803145
Error : HTTP_RESP_STATUS_CODE_NOT_OK - 503 Service Unavailable
HTTP_RES_STATUS_CODE_NOT_OK,503 error

Frustrated by Error 503--Service Unavailable Error

I am currently being frustrated by a Error 503--Service Unavailable error. I have worked with WL 8.x for a couple of years but just set up my first WL 9.x server. I cannot find anything in the logs and am at a loss as to how to proceed. I am not sure if the problem is with my WAR file or with the server configuration. Any help would be GREATLY appreciated.

I am having the exact same error. Any solutions yet???
Error is:
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.

Quicktime -50 Error (New Issue for Me)

I have OS X 10.9 and FCP X 10.0.9
I'm doing a project with h.264 footage that is simple - a talking head in front of green screen, keyed, lower third in beginning, Photoshop PSD still background under. Audio is secondary WAV synced with FCP X's auto sync in Events feature.
I'm doing about 35 of these, each a separate project in FCP X. The events are on a 3TB internal hard drive on my Mac Pro that has about 2 TBs free.
What I'm experiencing is I do one of the projects, render it out using the Apple Devices 720p preset (fast encoding), and it works perfectly. I duplicate that project, change the edit point of the same exact video event, share it and about 90% in it stops and gives me the Quicktime -50 error.
If I duplicate that project (just the project file) and then share it, it renders fine. I delete the other project that gave me the error, and then I continue.
Some give me the error, some don't. It's all the same assets.
I haven't figured out why it gives me this error.
Thanks!

I have OS X 10.9 and FCP X 10.0.9
I'm doing a project with h.264 footage that is simple - a talking head in front of green screen, keyed, lower third in beginning, Photoshop PSD still background under. Audio is secondary WAV synced with FCP X's auto sync in Events feature.
I'm doing about 35 of these, each a separate project in FCP X. The events are on a 3TB internal hard drive on my Mac Pro that has about 2 TBs free.
What I'm experiencing is I do one of the projects, render it out using the Apple Devices 720p preset (fast encoding), and it works perfectly. I duplicate that project, change the edit point of the same exact video event, share it and about 90% in it stops and gives me the Quicktime -50 error.
If I duplicate that project (just the project file) and then share it, it renders fine. I delete the other project that gave me the error, and then I continue.
Some give me the error, some don't. It's all the same assets.
I haven't figured out why it gives me this error.
Thanks!

FCPX Quicktime 50 Error

This just started within the last 30 days or so.
I am getting repeated Quicktime 50 errors when I try to export a project.
The footage is shot using an Atomos Ninja / Samuria using ProRes and edited in FCPX. I have done over 50 videos prior the exact same way and now I have this error which prevents me from exporting my work.
When it first started I completely changed hard drives doing a complete clean install of the system. (minimist install) I have completed two projects prior, now again, I am getting the error.
Everything is up to date, I have attempted to find any corrupt files, of which there are no corrupt files to found. I threw out a quick teaser yesterday, flawless, today the completed project and won't export. I get 19% and it errors.
I have read the posts from the past and nothing seems to work
I am pretty invested in FCPX and at this point it is becoming unuseable to me.

Have you tried everything that's on this list?
Go to Preferences and turn off Background Rendering.
Select your project in the library and in the File menu, click on Delete project Render Files; choose All when prompted. Select your event and do the same with the event Render files. In the project use the range tool to select a short section. Try to export that as a test. Don't render before you export.
If that doesn't work, copy the project and paste it into a fresh project. Try another export test.
If that doesn't work, create a new user account.
Russ

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?

Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Quicktime Unavailable Error

Similar Messages

Maybe you are looking for