Quicktime upgrade help

A few weeks ago my computer was working fine. Then I installed Kid Pix on my computer (I'm a teaching assistant). Now everytime I open up Quicktime (or any Apple product for that matter), I get a little pop-up saying that Quicktime has an upgrade available. When I click to upgrade, it either says that there was an error connecting to the server, or that it sucessfully upgraded. Yet when that happens, the pop-up appears again! Now I know my Quicktime is upgraded to the most recent model (ver. 7.2). I've also uninstalled Kid Pix from my computer, thinking that would of helped. But it didn't. Does anyone know why this message keeps popping up?

Does anyone know what's wrong? I'm all out of ideas.

Similar Messages

  • All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

    all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

    Here's a link to the QuickTime for Leopard 7.7 installer:
    http://support.apple.com/kb/DL761

  • HT2240 I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade. help

    I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade. help

    I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade.
    And just what sort of changes in "appearance" did you expect?
    If you can access the editing, conversion, and/or properties options once a file is loaded then the QT 7 app has been upgreaded for "Pro" use.

  • Quicktime upgrade = no controls in Firefox

    My quicktime in firefox now has no controls (pause, ff, etc.) since the quicktime upgrade today, when a few hours ago before the upgrade the controls were available. How can I get them to appear?
    Thanks!

    *Repairing permissions:*
    Save and/or quit your applications & doucuments
    Go to Applications>Utilities Folder
    Click Disk Utility
    Click the Volumn (HD) that you want to check.
    Click the Repair Disk Permissions button. (Don't worry about verifying)
    At the bottom of window when the repairs have finished, you will see the “most important thing”:
    Permission Repairs Complete
    The previliges have been repaired or completed on the selected volumn.
    Restart your computer (Optional).
    Go to Applications>Utilities>Disk Utility and select your volume and then select Repair Permissions.
    **Same directions are also in the OS Mac Help Menu.**
    http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature
    TIP-You should Repair Permissions & restart:
    After installing and/or updating an OS (Operating System).
    _*After installing software.*_
    After burning sessions
    Since you are new to the Mac/OS X enviroment. The following book should help you in your transition. They are not techno geeky, very easy reading & a few laughs along the way:
    Mac OS X Leopard Edition The Missing Manual - David Pogue

  • QuickTime Upgrades affect photo downloads?

    I recently completed a QuickTime upgrade installation (the kind that pop up when you restart your computer). Since I did this, now, when I select a link to view photos on certain webistes, it brings up the QuickTime logo with at "?" - and the photos never load.
    I have never had this problem downloading photos from these same websites and the only thing that has changed in the QuickTime upgrade....any suggestions on how I might be able to go back to viewing these photos?
    Thannks in advance!

    from http://discussions.apple.com/thread.jspa?messageID=1548574&#1548574
    there is reinstaller at apple support site,remove QT 7.0.4 and install back 7.0.1
    link here,
    http://www.apple.com/support/downloads/quicktime701reinstallerforquicktime704.ht ml
    then u can install 7.0.3 update.
    link here,
    http://www.apple.com/support/downloads/quicktime703.html
    i hope this help.
    2nd post
    <<So, it's a couple hours later. I'll go ahead and answer my own post. And add my own two cents.
    To anyone that hasn't updated to either QuickTime 7.0.4 or iTunes 6.0.2, don't do it. I know some of you uber Mac fiends will find fault with this, but they AREN'T worth it. iTunes 6.0.2 has the shaddy "Mini Store" which is a sham and QuickTime 7.0.4 caused my MPEG-2s to glitch out every time I accessed them in my finder window.
    To anyone that has installed these programs, here's what I ended up doing to solve my problem. I inserted my restore disc and reinstalled the OS while saving my old one. Then I updated my programs using the disc that came with my 5th Generation/Video iPod. My iPod came with a disc containing both iTunes 6.0 and QuickTime 7.0.3. I know this is convoluted, but I found it to be worth while.
    And the updates provided by the iPod updater 1.1 for the video iPod are not worth it unless you really feel the need to listen to crappy commercial Clear Channel/Infinity Broadcasting radio stations. I guess some people like listening to the Pussycat Spice Girl Dolls, every hour, on the hour. With static. And inane chatter.
    If it's not broke, don't fix it. >> Debberss... I agree 1000%
    3rd post
    <<I found a solution on my problems with quicktime logo with questionmarks instead of pictures. I went to apple and downloaded the 7.01 reinstaller. It removed the later versions like 03 and 04 an reinstalled 01 no problems at all. And now no more questionmarks but pictures.
    My question is you can trust Apples updates anymore. Apple or Firefox has not been keen on solving this issue. Next time I´ll wait quite a long time for sure until all bugs are taken care of. >>
    hope these help
    Deb >^.,.^<<br>
    eMac 2005 1.42ghz Combo 75gb 1gb Ram OSX 10.4
    2 WD FW HD's 160gb & 320gb Creative Speakers

  • QuickTime upgrade message with IOS6

    Since upgrading to ios6 on my IPad, I can't watch YouTube links on my favourite website, instead I get a message to upgrade to the latest QuickTime. Help?

    i found the solution on this sight - give them 5 stars - you have to downgrade!!! http://imagine-create-inspire.com/2012/09/29/ios6-video-encoding-issue-solution/

  • Unable to print after installing the new Quicktime upgrade

    I can not print to my Epson printer after installing the new Quicktime upgrade on my PowerBook G4 (1.67 GHz, OS X Version 10.4.11). I have re-installed the driver from Epson (several times), and have safe booted and reset my permissions but it will not print. My printer is a Epson Stylus Photo R1800. When I print, it just gives me this message... "Looking for Printer 'EPSON Stylus Photo R1800' "

    Latigna, welcome to Apple Discussions.
    Here's a similar problem on the same Epson printer. http://discussions.apple.com/message.jspa?messageID=8928421
    Also look at Troubleshooting printing issues in Mac OS X
    http://docs.info.apple.com/article.html?artnum=106714
     Cheers, Tom

  • Help,just  entered registration code for quicktime pro,help needed

    Help,just  entered registration code for quicktime pro,help needed,cant seem to see the quicktime pro screen i saw on internet with all the edit and extra things at the top,i dont understand this,any help,Dave

    I hope this helps http://support.apple.com/kb/ht2240 good tips on your prob here..good luck

  • HT4847 No where do I see a link to "cancel iCloud upgrade" HELP?

    No where do I see a link to "cancel iCloud upgrade" HELP?

    Yes, I'm familiar with the old RTFM rule, but I tried four different times to retrieve that manual form the Apple site. Each time got an error message that something was wrong, that they were working on it, and to please come back later. On the fifth try last night, I got through and successfully downloaded the user guide.  Woo hoo!

  • Itunes/Quicktime Upgrade Gone Bad HELP.

    I am Running Windows XP Internet Explorer. Originally had Itunes I think it was version 4.6 with Quicktime which worked fine. Attempted upgrade to Itunes 6.0.
    Needless to say my old version of ITunes is gone. The install seems like it works, but no icon on desktop and no folder located in program files.
    Attempted quicktime 7.0 install (Stand Alone) Windows installer interrupted message dispayed at the end of install. No changes maded to disk.
    Any help greatly appreciated. I have downloaded music in the M4P format which I can not play or burn to disk.
    Thanks alot
    Vinny

    Yo VinnyD ... yous gotta be from Brooklyn wit' a name like dat!
    Anyway, try dis ... here is a post that I added two weeks ago. It includes a solution that worked for me. I hope that it works for you! Good luck.
    Hey troubled Podheads,
    I was one of the legion with problems in downloading iTunes6 and QT7 for Windows until I tried something (I must say that I am not a pc wizard and I don't know the technical reasons for why the following worked, it just did! So if there are any pc geeks out there, be sure to chime in). Anyway, this is what I did. First uninstall QuickTime if you do have it on your pc. If not, just go to the next step:
    Go to START, then RUN. Type in regedit and then click OK. Your REGISTRY EDITOR should open. You should see HKEYLOCALMACHINE in the scroll down menu on the left, with a small box to its left. Make sure that the inside of the box has a negative sign - this will open up the next set of subfolders. Next, make sure that the subfolder, SOFTWARE, has a negative sign in the small box to its left. Next, make sure that there is a negative sign in the box next to the subfolder entitled, Apple Computer, Inc. You'll see at least three subfolders: iPod, iTunes and QuickTime. Click once on the QuickTime folder until it is highlighted and then delete it. You will be asked if you want to delete QuickTime and its subfolders. Click ok and then close out the Registry Editor.
    Next, download the stand alone QuickTime 7 at this link (you may have to cut and paste this link to open this website):
    http://www.apple.com/quicktime/download/standalone.html
    When you download the stand alone QT7, you may get a couple of error messages (I did), but if you repeatedly click ok (like I did), the QT7 player should load with no problems.
    Again, I am no pc geek, but this worked for me and I have gained access to iTunes6 (with video capacity) and my complete library is intact. Nothing like trial and error!! Good luck -- I hope this works for all of you frustrated Podheads out there!

  • Time to Upgrade - Help!

    I currently have a 1.8 G5 that I bought in 2005. It came with Panther 10.3.7 and up to now has been relatively stable. Since I bought the computer within the Tiger realease window, I have the Tiger disc in hand. Since I now need Tiger to upgrade iTunes, Quicktime and other items, I now want to upgrade to Tiger (also as a prep to Leopard).
    My migration from System 9 to to 10 on my iMac was a total disaster, even as I had compltely mapped out the change. I don't want this to happen again. I have read many useful helps in these forums and are now trying to put together, hopefully, a good plan of implementation.
    At this time, I have repaire permissions using Cocktail, updated all other items using Mac Janitor and am in the process of saving certain folders & files to a DVD.
    I am most concerned about, after the upgrade:
    1. If my Airport connection will still operate or do I need to save additional settings.
    2. Will I still be able to connect to the internet without any additional settings.
    3. Am I missing anything in the process so I don't lose my Home settings.
    I'm sure somewhere along these items, they may have been many items posted and the ones I have read have been informative, but I'm looking at the big picture and want to make sure I cover all the bases.
    Do I really need to back up the entire hard drive? I'm not sure how to do that, but I did purchase a new LaCie DVD RW to assist me if that's the case. I have already used it to back up certain files and folders.
    I've been a Mac user for years, it just seems that as more is added to these software update, you have to increase your learning curve by quite a bit.
    Hope I've been clear enough on what I am looking for and I appreciate any assiatance. Hope I didn't get too wordy.
    Thanks in advance

    First backup your current system. Make a bootable backup to a second internal drive or an external Firewire drive.
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
    For added precaution you can boot into safe mode before doing the clone.
    Second, repair your hard drive:
    Repairing the Hard Drive and Permissions
    Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Third, proceed with the Tiger installation. The default should be an Upgrade install. This preserves all from your previous system. Bear in mind that any third-party software you currently use that isn't compatible with Tiger will require upgrading.
    Fourth, after restarting into Tiger run Software Update and install the required updates to bring Tiger to its current version.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Macbook air battery cut in half after Mavericks upgrade- help?

    Hey everyone,
    I have a mid-2013 MBA that would get 10-12 hours of life, on average, with ML. After upgrading to 10.9 though, the battery life has been cut in half. Not only that, but the battery still drains when I have the lid closed and runs hot inside of my bag. This used to never happen before. I have performed SMC and PRAM resets multiple times and I am almost at my wits end. I travel extensively and I purchased this MBA specifically to not worry about my battery life! Quick note, I have not installed any new programs since the OS update and my usage has remained consistant.
    Thank you all for your help!
    Here is the etercheck output!
    Hardware Information:
              MacBook Air (13-inch, Mid 2013)
              MacBook Air - model: MacBookAir6,2
              1 1.3 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 5000 - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:22:35
    Disk Information:
              APPLE SSD SM0128F disk0 : (121.33 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 120.47 GB (81.79 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              com.avast.PacketForwarder          (1.3)
              com.avast.AvastFileShield          (2.0.0)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.google.keystone.daemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] Safe.Connect.plist
    Launch Agents:
              [loaded] com.divx.dms.agent.plist
              [loaded] com.divx.update.agent.plist
              [loaded] com.google.keystone.agent.plist
              [loaded] Safe.Connect.client.plist
    User Launch Agents:
              [loaded] com.avast.home.userinit.plist
    User Login Items:
              iTunesHelper
              Google Drive
    3rd Party Preference Panes:
              avast! Preferences
              Flash Player
              TeXDistPrefPane
    Internet Plug-ins:
              Default Browser.plugin
              DivX Web Player.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              googletalkbrowserplugin.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              OVSHelper.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              thinkorswim plugin_x86_64.plugin
              tossc plugin_x86_64.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 120.47 GB Disk used: 38.68 GB
              Destinations:
                        Data [Network] (Last used)
                        Total size: 2 TB
                        Total number of backups: 39
                        Oldest backup: 2013-06-27 21:42:24 +0000
                        Last backup: 2013-11-05 14:01:05 +0000
                        Size of backup disk: Excellent
                                  Backup size 2 TB > (Disk size 120.47 GB X 3)
    Top Processes by CPU:
                   2%          WindowServer
                   1%          EtreCheck
                   1%          fontd
                   0%          sysmond
                   0%          Dock
                   0%          Google Chrome
                   0%          Activity Monitor
                   0%          Google Drive
                   0%          coreservicesd
                   0%          aosnotifyd
    Top Processes by Memory:
              156 MB             Google Chrome
              106 MB             Google Chrome Helper
              90 MB              mds_stores
              82 MB              Google Drive
              57 MB              Finder
              49 MB              WindowServer
              41 MB              Dock
              25 MB              SystemUIServer
              25 MB              mds
              25 MB              CalendarAgent
    Virtual Memory Statistics:
              4.33 GB            Free RAM
              2.36 GB            Active RAM
              697 MB             Inactive RAM
              644 MB             Wired RAM
              1.05 GB            Page-ins
              0 B                Page-outs

    I don't think so. App Nap seems to be in place for all of my programs. Recently, I have resigned to removing chrome and my anti-virus software. Unfortunatly, this did not really solve the problem. It extended my average battery life by MAYBE an hour or so, however, I am still seeing significant battery drains and laptop heating when the lid is closed. I have resigned to taking my laptop in soon. I have attatched another etre check output though if you wish to see an updated log:
    Hardware Information:
              MacBook Air (13-inch, Mid 2013)
              MacBook Air - model: MacBookAir6,2
              1 1.3 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 5000 - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 5:21:25
    Disk Information:
              APPLE SSD SM0128F disk0 : (121.33 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 120.47 GB (80.07 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.google.keystone.daemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] Safe.Connect.plist
    Launch Agents:
              [loaded] com.divx.dms.agent.plist
              [loaded] com.divx.update.agent.plist
              [loaded] com.google.keystone.agent.plist
              [loaded] Safe.Connect.client.plist
    User Launch Agents:
    User Login Items:
              iTunesHelper
              Google Drive
    3rd Party Preference Panes:
              Flash Player
              TeXDistPrefPane
    Internet Plug-ins:
              Default Browser.plugin
              DivX Web Player.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              googletalkbrowserplugin.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              OVSHelper.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              thinkorswim plugin_x86_64.plugin
              tossc plugin_x86_64.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 120.47 GB Disk used: 40.41 GB
              Destinations:
                        Data [Network] (Last used)
                        Total size: 2 TB
                        Total number of backups: 34
                        Oldest backup: 2013-06-27 21:42:24 +0000
                        Last backup: 2013-12-17 04:32:11 +0000
                        Size of backup disk: Excellent
                                  Backup size 2 TB > (Disk size 120.47 GB X 3)
    Top Processes by CPU:
                   2%          WindowServer
                   1%          EtreCheck
                   1%          fontd
                   0%          Google Drive
                   0%          Finder
                   0%          coreservicesd
                   0%          com.apple.WebKit.Networking
                   0%          Dock
                   0%          notifyd
                   0%          opendirectoryd
    Top Processes by Memory:
              369 MB             Safari
              120 MB             com.apple.WebKit.WebContent
              115 MB             iTunes
              98 MB              com.apple.IconServicesAgent
              82 MB              Google Drive
              66 MB              WindowServer
              57 MB              Finder
              57 MB              com.apple.WebKit.Networking
              41 MB              Dock
              41 MB              DashboardClient
    Virtual Memory Statistics:
              3.35 GB            Free RAM
              3.55 GB            Active RAM
              435 MB             Inactive RAM
              694 MB             Wired RAM
              522 MB             Page-ins
              0 B                Page-outs

  • ITunes won't start after upgrade-HELP!

    I tried upgrading to the latest iTunes on my windows xp and nothing seemed to go wrong. everything installed correctly. Quicktime opens and operates perfectly, but iTunes will not open at all!
    I have tried various different uninstall-reinstall combinations, including older versions. nothing works at this point!
    HELP!

    Same thing has happened to me apart from my itunes has been wiped from the computer, the only thing you can do is reset your computer to a a few days before you tried to upgrade. your itunes will come back on plus all your music but you can't upgrade to 7.7 or it will disappear again. Very annoying and time consuming, Apple need to sort this out.

  • I Cant download iTunes 7.0.1 OR buy any music until i upgrade. help me!!

    when i try to download iTunes 7.0.1 off this website i type my email and then it goes to the thank you page. it says it has been sucessfully downloaded but every time i open my itunes it stays the same. i am not sure what version i have right now but until i upgrade i can't buy music! I have tried to download it about 10-15 times with three different e-mail addresses and it still hasnt worked!
    PLEASE! any ideas will help
    I have tried restarting my computer but it didnt work.
    Desktop   Windows XP  

    UPDATE/EDIT FROM PREVIOUS POST:
    Ok. The new 7.0.18 does repair the volume slider audio issue. HOWEVER, Simply installing the new update (at least for me) did **NOT** fix the problem. After posting my previous post, I tried to remove Quicktime and iTunes completely and try reinstalling.
    It turns out that when I uninstalled Quicktime from Add/Remove Programs, it didn't remove all the Quicktime files and it was not reinstalling Quicktime afterwards!!
    I only noticed when I downloaded the standalone version of Quicktime and tried running it and it said a "newer version" was on my computer, though it did not show up on my Add/Remove Programs file listing.
    So I looked in the usual places and found that I had a Quicktime folder remaining in the Program Files folder and one in the C:\Windows\system32 folder. I also had to manually remove the following files from the C:\Windows\system32 folder:
    Quicktime.qts, QuickTimeMusicalInstruments.qtx, the Quicktime.Resources folder, QuicktimeVR.qtx and the QuickTimeVR.Resources folder.
    The main problem is that iTunes didn't let me know there was an issue with the QuickTime installation. It just wouldn't run iTunes. There should have been a notification.
    Anyway, after all this, I reinstalled iTunes fresh and checked the volume slider and LO' And Behold! The volume slider issue was repaired.
    However, there is a LOT of skipping occurring that never happened before. Not sure what's up with that. CPU usage stays low and then I get a few skips per minute...UNACCEPTABLE!!! That didn't happen before and that issue will still need to be fixed. Until then, back to WinAmp. Thx a LOT Apple...you *#^@ing hosers!

  • Having trouble with quicktime. Help please.

    A while ago, maybe a few months actually. My quicktime stopped working so i uninstalled it and installed it again. Now whenever I go to a website where I need quicktime to see videos, I only hear the audio (e.g Apple websites, guided tour videos, audio only). What can I do to fix this problem.

    These forums can somtimes be helpful, but after a lot of reading in this case, I'm stumped.
    No help starting, then quitting GarageBand, no help setting MIDI audio output to 44100 Hz (it was already there), no help reinstalling QT 7.0.4, no help rolling back to QT 7.0.1, no help shutting down all other applications when running QT. OS is current, with no more available updates. The video I edited on this same computer using Quicktime and posted on putfile plays fine on my (gasp) older PC running Windows QT 7.0.4.
    As a loyal Macintosh owner since 1984 (my family currently has 7 working Macs, 3 iPods and 1 PC), I have the sinking feeling Apple seems to be becoming less unique and more microsoft like over time. While MS isn't up to the level of Apple yet, the gap seems to be closing. I don't want to know how to change my audio settings, repair permissions or do anything not directly related to the task at hand. I'm getting tired of paying for "upgrades" that aren't, including the new iLife suite and the QT 7 pro key I recently bought.
    How do we report this issue? I encourage everyone who is having problems with Quicktime videos stuttering, dropping video or audio to report this so that Apple will be made aware and held responsible.
    PowerBook G4 1.33 GHz   Mac OS X (10.4.5)   1.25 GB Ram

Maybe you are looking for