QuickTime Upgrade trouble.

I just bough QuickTime Pro 7. I received my registration code and entered it into the box. It showed everything was correct; however, when I go to click on File> new audio recording. It shows I have purchased it. What am I doing wrong?

corection it shows I HAVENT PURCHASED IT.

Similar Messages

All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761

Unable to print after installing the new Quicktime upgrade

I can not print to my Epson printer after installing the new Quicktime upgrade on my PowerBook G4 (1.67 GHz, OS X Version 10.4.11). I have re-installed the driver from Epson (several times), and have safe booted and reset my permissions but it will not print. My printer is a Epson Stylus Photo R1800. When I print, it just gives me this message... "Looking for Printer 'EPSON Stylus Photo R1800' "

Latigna, welcome to Apple Discussions.
Here's a similar problem on the same Epson printer. http://discussions.apple.com/message.jspa?messageID=8928421
Also look at Troubleshooting printing issues in Mac OS X
http://docs.info.apple.com/article.html?artnum=106714
 Cheers, Tom

Quicktime upgrade = no controls in Firefox

My quicktime in firefox now has no controls (pause, ff, etc.) since the quicktime upgrade today, when a few hours ago before the upgrade the controls were available. How can I get them to appear?
Thanks!

*Repairing permissions:*
Save and/or quit your applications & doucuments
Go to Applications>Utilities Folder
Click Disk Utility
Click the Volumn (HD) that you want to check.
Click the Repair Disk Permissions button. (Don't worry about verifying)
At the bottom of window when the repairs have finished, you will see the “most important thing”:
Permission Repairs Complete
The previliges have been repaired or completed on the selected volumn.
Restart your computer (Optional).
Go to Applications>Utilities>Disk Utility and select your volume and then select Repair Permissions.
**Same directions are also in the OS Mac Help Menu.**
http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature
TIP-You should Repair Permissions & restart:
After installing and/or updating an OS (Operating System).
_*After installing software.*_
After burning sessions
Since you are new to the Mac/OS X enviroment. The following book should help you in your transition. They are not techno geeky, very easy reading & a few laughs along the way:
Mac OS X Leopard Edition The Missing Manual - David Pogue

Using 3.6.23. When i upgrade, trouble with Lloyds tsb site.

Using 3.6.23. When i upgrade, trouble with Lloyds tsb site. One of my accounts has code like>br all over it. Also when i want to access a specific account it logs me out. Cannot upgrade as cannot use internet banking. Any ideas? edit

After I loaded 5.5, then removed it and loaded 3.6 again, I had no problems.
Then my hard drive died and I installed a new one.
Then I downloaded ONLY 3.6 since I already knew I didn't like the changes that 5.5 had made and the kinks hadn't been ironed out. That was in July.
The hesitation problem started recently, toward the end of Sept. I have wireless cable modem that runs 36-54 mbps but in Sept/Oct I was visiting family and distance from their router sometimes meant running at 12 or 24. I thought the hesitation/lagging was due to that. BUT
Since coming home in mid Oct., although nothing about my home connection has changed, I am finding this lagging/not responding/hesitation problem continues AS IF the connection were slow but router/modem/internet connection are all intact.
This is what made me wonder if anyone else is experiencing this/reporting it to Firefox. Apparently not.

QuickTime Upgrades affect photo downloads?

I recently completed a QuickTime upgrade installation (the kind that pop up when you restart your computer). Since I did this, now, when I select a link to view photos on certain webistes, it brings up the QuickTime logo with at "?" - and the photos never load.
I have never had this problem downloading photos from these same websites and the only thing that has changed in the QuickTime upgrade....any suggestions on how I might be able to go back to viewing these photos?
Thannks in advance!

from http://discussions.apple.com/thread.jspa?messageID=1548574&#1548574
there is reinstaller at apple support site,remove QT 7.0.4 and install back 7.0.1
link here,
http://www.apple.com/support/downloads/quicktime701reinstallerforquicktime704.ht ml
then u can install 7.0.3 update.
link here,
http://www.apple.com/support/downloads/quicktime703.html
i hope this help.
2nd post
<<So, it's a couple hours later. I'll go ahead and answer my own post. And add my own two cents.
To anyone that hasn't updated to either QuickTime 7.0.4 or iTunes 6.0.2, don't do it. I know some of you uber Mac fiends will find fault with this, but they AREN'T worth it. iTunes 6.0.2 has the shaddy "Mini Store" which is a sham and QuickTime 7.0.4 caused my MPEG-2s to glitch out every time I accessed them in my finder window.
To anyone that has installed these programs, here's what I ended up doing to solve my problem. I inserted my restore disc and reinstalled the OS while saving my old one. Then I updated my programs using the disc that came with my 5th Generation/Video iPod. My iPod came with a disc containing both iTunes 6.0 and QuickTime 7.0.3. I know this is convoluted, but I found it to be worth while.
And the updates provided by the iPod updater 1.1 for the video iPod are not worth it unless you really feel the need to listen to crappy commercial Clear Channel/Infinity Broadcasting radio stations. I guess some people like listening to the Pussycat Spice Girl Dolls, every hour, on the hour. With static. And inane chatter.
If it's not broke, don't fix it. >> Debberss... I agree 1000%
3rd post
<<I found a solution on my problems with quicktime logo with questionmarks instead of pictures. I went to apple and downloaded the 7.01 reinstaller. It removed the later versions like 03 and 04 an reinstalled 01 no problems at all. And now no more questionmarks but pictures.
My question is you can trust Apples updates anymore. Apple or Firefox has not been keen on solving this issue. Next time I´ll wait quite a long time for sure until all bugs are taken care of. >>
hope these help
Deb >^.,.^<<br>
eMac 2005 1.42ghz Combo 75gb 1gb Ram OSX 10.4
2 WD FW HD's 160gb & 320gb Creative Speakers

After quicktime upgrade, old movie won't play smooth

Hi, I had an older verson of quicktime and a movie I had edited in imovie worked and played fine, then I upgraded to quicktime 7.0.1 and now the movie plays unsmooth with pasues and skips. All my other movies that I edited in imovie play fine, but they are not as big. Any ideas on why or what I should do? thanks
powerbook G4 Mac OS X (10.3.9)

The object tag code is used by Internet Explorer and the embed tag is used by all other browsers.
Your page code is missing quote marks around the words true, loop and controller. This may be causing other browsers some trouble.
I tried downloading the file via QuickTime Player's Open URL feature:
http://inthestudioshow.com/media/Inthe_Studio_ep_promomed.mov
The movie is not set to fast start. You can fix this by using QT Pro.
Open the file (the version on your server) and use Save As (save location is your Desktop). Upload this "new" version to your server and replace the "old" one.
Save As will restore the fast start properties in the file.

Itunes/Quicktime Upgrade Gone Bad HELP.

I am Running Windows XP Internet Explorer. Originally had Itunes I think it was version 4.6 with Quicktime which worked fine. Attempted upgrade to Itunes 6.0.
Needless to say my old version of ITunes is gone. The install seems like it works, but no icon on desktop and no folder located in program files.
Attempted quicktime 7.0 install (Stand Alone) Windows installer interrupted message dispayed at the end of install. No changes maded to disk.
Any help greatly appreciated. I have downloaded music in the M4P format which I can not play or burn to disk.
Thanks alot
Vinny

Yo VinnyD ... yous gotta be from Brooklyn wit' a name like dat!
Anyway, try dis ... here is a post that I added two weeks ago. It includes a solution that worked for me. I hope that it works for you! Good luck.
Hey troubled Podheads,
I was one of the legion with problems in downloading iTunes6 and QT7 for Windows until I tried something (I must say that I am not a pc wizard and I don't know the technical reasons for why the following worked, it just did! So if there are any pc geeks out there, be sure to chime in). Anyway, this is what I did. First uninstall QuickTime if you do have it on your pc. If not, just go to the next step:
Go to START, then RUN. Type in regedit and then click OK. Your REGISTRY EDITOR should open. You should see HKEYLOCALMACHINE in the scroll down menu on the left, with a small box to its left. Make sure that the inside of the box has a negative sign - this will open up the next set of subfolders. Next, make sure that the subfolder, SOFTWARE, has a negative sign in the small box to its left. Next, make sure that there is a negative sign in the box next to the subfolder entitled, Apple Computer, Inc. You'll see at least three subfolders: iPod, iTunes and QuickTime. Click once on the QuickTime folder until it is highlighted and then delete it. You will be asked if you want to delete QuickTime and its subfolders. Click ok and then close out the Registry Editor.
Next, download the stand alone QuickTime 7 at this link (you may have to cut and paste this link to open this website):
http://www.apple.com/quicktime/download/standalone.html
When you download the stand alone QT7, you may get a couple of error messages (I did), but if you repeatedly click ok (like I did), the QT7 player should load with no problems.
Again, I am no pc geek, but this worked for me and I have gained access to iTunes6 (with video capacity) and my complete library is intact. Nothing like trial and error!! Good luck -- I hope this works for all of you frustrated Podheads out there!

Why does iMovie file stutter after QuickTime upgrade from 6.5.2 to 7.1.3?

I have a fifteen minute iMovie project that played fine with
QT 6.5.2. About a year ago I upgraded to the, then, current QuickTime version - I think it was 7.0.1, or something - and this particular movie file began to playback erratically. A search of Discussions turned up the possibility that QT Version 7 did not work well with Panther. I deinstalled that version of QT and went back to 6.5.2 and the project again played back correctly and I have been happy until recently upgrading to the current version of QT (in order that songs and videos downloaded from iTunes Store will play, for one thing) hoping that the previous glitch might have been fixed. The same movie file that experienced the previous problem is again having fits. At this point in time it is difficult to re-install 6.5.2, nor do I really want to. Anybody have any suggestions on how to get this file to play correctly? Strangely, no other video files have been affected. They all play back correctly using QT 7.1.3 - the current version. What is it about that particular iMovie project?

Erratic playback — sometimes called stutter — can occur in iMovie projects. It tends to be caused by the number of audio clips. But sometimes it's caused by a particular song.
http://discussions.apple.com/thread.jspa?messageID=2597033#2597033
When it occurs because of a particular song, re-importing that song as described in that thread will usually fix the problem. Essentially, the fix involves using iTunes to burn the song onto a CD, then importing the CD AIFF file to the project.
Karl

Can't print after iTunes and Quicktime upgrade

I installed the upgrades to iTunes 7.1 and Quicktime 7.1.5. Now none of my applications can print to any of my printers. The behavior is that the print window appears normal, and I can "Save to pdf". When I click "Print" the appllication pops up an error message saying that printing is not possible. Eudora says it was trying to "allocate a GrafPort". the other apps give an uninformative message. I've tried both Apple and non-Apple apps. I haven't found an app that can print to any of my 3 priinters - 2 via USB, 1 via network connection.
I've reinstalled both upgrades and 10.4.8 and Security and patch. I've repaired permissions. The drivers are up to date. I zapped the PRAM. I can still print from my bootable backup. I've tried to use Fixamac's Printer Server Repair utility. It runs on the bootable backup, but it rejects my user passwords on the broken system (i.e., I can't run it)
I can live with the bootable backup for awhile, but I'd appreciate any advice for tracking down and fixing the problem.

in the CUPS error log I see several instances of the following
[09/Mar/2007:22:36:58 -0500] Full reload complete.
I [09/Mar/2007:22:54:03 -0500] Scheduler shutting down normally.
I [09/Mar/2007:22:55:24 -0500] Listening to 0:631
I [09/Mar/2007:22:55:24 -0500] Listening to 300f70:0
I [09/Mar/2007:22:55:24 -0500] Loaded configuration file "/private/etc/cups/cupsd.conf"
I [09/Mar/2007:22:55:24 -0500] Configured for up to 100 clients.
I [09/Mar/2007:22:55:24 -0500] Allowing up to 100 client connections per host.
I [09/Mar/2007:22:55:24 -0500] Full reload is required.
E [09/Mar/2007:22:55:24 -0500] LoadAllClasses: Unable to open /private/etc/cups/classes.conf - No such file or directory
Could this missing file be the source of my problem?

Upgrade trouble - invalid serial number??

Hello all,
Maybe I'm just missing something obvious here, but I'm trying to upgrade Logic 7.2 to Logic Studio.
Early on in the install there is a prompt for entering your serial number. I do that, using the serial number on the Logic Studio install documentation. Then I receive another prompt asking for my original serial number, or to insert my xskey. My xskey is always attached to my mac, so I figured I don't have an original serial number, and my xskey is attached, so I select continue. But then I get a prompt that reads "The serial number you have entered is invalid", and the install can't continue.
Is there something I am supposed to enter in that second serial number prompt? Seems like my xskey is not being recognized. But my 7.2 install runs flawlessly.
Now this is the interesting thing, the xskey I have is old (been using Logic for years). It's one of the old Emagic keys (the blue one), not the Apple xskeys. Could this be a problem? Has anyone else had this issue? Is there a work-around?
Thanks in advance.

That has to be frustrating waiting for that...
My L8 upgrade is ordered, hope I don't go through that.
So do you have the original manual that came with L7 upgrade?
Mine has it on the inside cover, haven't looked at the dongle # to see if they are the same.
As well, is your dongle updated to the latest? That's what I had trouble doing with the 7 upgrade, I had to update the dongle first. Mind you you're using 7.xx so it should already upgraded, but just thinking.
Later
Message was edited by: seclusion

Quicktime having trouble playing animated movies

I have a few movies I downloaded from DC++ that I want to play, but quicktime says it's unable to play them because it's missing software. I have the newest update of QT, and the movies I have trouble playing are only animated ones, such as corpse bride, team america, and final fantasy. Whats up?

If QuickTime can open the files then go to the Window menu and select Show Movie Info to see the Format: for information on what animation codec may have been used, then try to find a suitable QuickTime component for playback... the link below may help with that.
http://discussions.apple.com/thread.jspa?messageID=1558248

Is Quicktime Upgrade required to download music from itunes?

I recently upgraded to the nweer version to itunes. Then a couple of weeks later a receive a messsge telling me that an upgrade for quicktime is available. I choose to ignore this pop up. The next time I go to itunes to download music I get an error message telling me the required folder could not be found, err= -120 anyone know if the is could happen becuase I did not up grade my Quicktime?

Not directly, no. You can only really transfer via iCloud or iTunes. Even then it isn't "transferring it" from iPad to the nano but in fact syncing the nano to the same iTunes library as used with the iPad, or downloading from iCloud to both devices (theoretically in this case).

QuickTime Player trouble!!!

I am having trouble using my QuickTime Player. Everytime I click to open my QucikTime Player, it says on the screen on QickTime that it is switching but nothing happens.
hp pavilion ze4400 Windows XP

I seem to have found a solution myself.
when opening Quicktime, it wants to show the Content Guide. Somewhere the player doesnt show this correctly. Becauuse I don't have any need for this guide, i disabled it. Now the player starts normal. Playback of .mov files is also normal now (they didn't play before).
disable it at Edit - Preferences - Player preferences and disable the Show Content guide at Startup

Quicktime upgrade stopped avi files playing.

Hi everyone.
Having upgraded to Quicktime 7.1.2, I've noticed certain types of AVI files have stopped working - as in, Quicktime "quits unexpectedly".
Has anyone else experienced this or managed to fix it?
Thanks.

Hi, shropshire_massiv.
Are these AVI files that previously opened in QuickTime or new AVI files?
AVI files are strange animals. It is a "container" format, but the actual CODECs used for the audio and video can vary widely and a file still be considered AVI. When QuickTime cannot play an AVI file, it is usually because of one of the CODECs in which the audio or video is encoded is not one supported by QuickTime.
For complete information about viewing AVIs and DivX files on Mac OS X, including converting such to QuickTime, see my "Playing AVIs and DivX Files" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

QuickTime Upgrade trouble.

Similar Messages

Maybe you are looking for