Quicktime video does not display?

I have designed several sites that have Quicktime videos but they do not play. Does Quicktime not work on the iPhone? The videos on Apple were the only ones online that we were able to play.

iPhone uses HS214 video format. See the technical specification. You need to convert any movie format to this format(m4). There are programs available for that, try vailsoft or something..

Similar Messages

Video does not display when sending from Final Cut Pro to Motion

Suddenly, when sending an audio & video sequence to Motion, a new Motion file is created, and all my layers come in properly, but the video does not display.
The audio plays fine, and Motion clearly know that there are video tracks there, but it does not display them.
Additionally, when rendering the Motion file back in FCP, it turns in to black video.
I have previous sequences within the same project that were sent just fine, and are editable properly, but any new ones I try to create just come out black.
Help, please?

Do you have Motion mistakenly set to render out with an Alpha channel?
Double click your Motion clip in the Timeline. Go to Modify > Composite Mode in the menu bar and set the Alpha to "None/Ignore".

Firefox Embedded Quicktime Video does not seem to be working

Hi,
I am having trouble with Quicktime Videos that run using the Quicktime plug-in in the Firefox browser. I am not having similar problems with Safari and much of what I have been reading seems to talk about the Flash problem (which is not the same). I am on OSX 10.4.11 (852167), kernel Darwin 8.11.1, Firefox version 2.0.0.9, and Quicktime plug-in version 7.3.
The videos I was trying to play are on the startrek.com site (specifically, http://www.startrek.com/startrek/view/series/TOS/episode/68730.html then click on the "Remastered Episode Preview" link -- it is a JavaScript popup from that point). The result is a pop-up with a white box where the video should be and all of the quicktime controls at the bottom. At first it seemed intermittent (maybe one out of three times the video played). Now, it doesn't seem to work at all (could just be that I cleared the cache and it was picking that up).
I did try it with Safari and this video (and the others, of course -- that is just a test case) always works. I dug through the Apple support forum and the mozilla forum for firefox, but couldn't find anything specific to this problem.
Thank you for your help,
Jim

HI and I am perplexed.
I have the newest update for Quicktime on my Powermac Yosemite, 1gb ram and Flip4Mac installed. I have configured the prefernces for both the system prefs part and the QT prefs but I can not see the video...I can hear the music which this makes the 4th time I have installed it and I finally hear it but no pictures.
I don't know what to do. I have OS 10.3.9, updated QT to the latest version, installed Flip4mac, fixed the prefs and even rebooted to the Panther 10.32 cd and used the Disk Utility to repair all hd's and repair permissions to the OS partition.
As I said I can now hear the vid but no images appear. We are trying to use the vids (.wmv) to show off our members chosen each month but the few of us mac users only get moozik...lol
I have tried .avi, .wmv and .swf, the latter I can see and hear but very choppy. In OS 9 I knew there were several codecs that needed to be installed but I thought they were installed with Panther.
The url of the movie is Stormi's Artist of the Month Video ***may contain some nudity but it is not real people it is 3d art***
Message was edited by: MaryW

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?
We prepared simple Word Press web site. We used a Revolution slider plugin with HTML5 video layer. It works properly on Chrome, Safari, older Mozilla FF.
But we had a problem on PC computers with FF 29.0 30.0 – after reinstall of browser everthing seems to be OK. The slider works. Unfortunately even the reinstallation on Mac computers does not help. There is no visible video on Mac FF 30.0.
We are looking for some information what we can do to solve this problem. Could you help?

Can you play the video on YouTube?
*http://www.youtube.com/watch?v=Ugh2YvHU7D0#t=58
Note that Mac lacks support to play MP4 files natively without using a Flash player.

Video icon in buddy list does not display when iChat not running?

I have my father-in-law's computer setup to automatically log into iChat when he turns on the computer. However, it does not say he can video chat (the icon does not display) until he actually opens iChat. Is there any way around this? The only thing I thought of was to get iChat to open at login and just not display the buddy list.
Basically, I want him to be available to video chat with his grand daughter...but he doesn't need to see the buddy list or the app for that matter. She would initiate all chats.
Thanks
Brian

I am trying to imagine what you have done here.
It is possible to have iChat as a Login Item.
It is possible for iChat to start Up with the Buddy Lists hidden.
From there Chats can be started from the File menu or Apple key and N together.
To do it this way you have to know the Screen Name of who you are calling.
You should be able to accept incoming A/V chats.
9:46 PM Thursday; January 10, 2008

Video does not Work in iTunes Store please help! annoying problem!

The video does not work in the itunes store. I get no picture, only sound when i want to preview a music video or a movie trailer. No video at all. However, i can watch my movies and music videos that i already own. Please, is there any smart guy who knows a solution?

I'm having this same issue. I tried some things but still couldn't get it to work the way it used too.
It will not play the video portion in iTunes only the audio if I click on the song. If I switch the settings from Music Video to TV show in the info tab, the file plays fine. If I open it in Quicktime, the file plays fine.
I've tried changing the preferences so that the video will play in the iTunes window, in a separate window, etc. and all it plays is the audio and will show the artwork instead of playing the video.

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

Exported Video Does Not Look Right

I am sure this is a basic setting I am overlooking, but a lot of this is new to me - any help would be GREATLY appreciated.
My goal is to create a high quality 640x480 movie for Computer/Web viewing only.
• I shot a short video using a Canon Vixia HV30 to mini DV tape using the SD standard - no problem. I guess that records at 720x480 non-square pixels at 29.97fps - is that right?
• I used log and capture inside of FCP v6.0.5 to capture the various clips I needed - no problem (I don't think). If I open each of those clips from the finder in Quicktime they look "pretty" good, but a bit of aliasing on the diagonals and somewhat blurry, but not sure why? Everything looks sharp on the smaller camera LCD screen? and looks pretty good inside of FCP on the Canvas? If I open one of these captures directly inside of Quicktime and do a get info, it says...
DV 720x480 (640x480)
FPS: 29.95
Normal Size: 640x480 pixels
Current Size: 640x480 pixels (Actual)
All these Quicktime movies appear slightly larger in height and width than the same clips when viewed in the FCP Canvas?
If I open the Sequence Settings in FCP it says...
Frame Size 720 x 480 NTSC DV (3:2)
Pixel Aspect Ratio NTSC - CCIR 601 /DV (720x480)
Field Dominance: None
Editing Timebase: 29.97
Everything looked pretty good inside FCP so I Exported a QT Movie using "Current Settings". Then opened the resulting self-contained movie in QT and it looks pretty bad. When I get info in QT on the rendered final movie it reads...
DV 720x480 (640x480)
FPS: 29.97
Normal Size: 720x480 pixels
Current Size: 640x480 pixels (Actual)
So... the FPS and the Normal Size are not the same as the captured original clips.
Can anyone tell me what I am doing wrong?
Is this just the wrong Sequence Settings, Export Settings or do I have to start over an re-capture all my footage some other way?
PS - I am assuming that the DV Camcorder is recording interlaced (60 fields) rather than progressive - is that right. Do I need to de-interlace the video somehow?
Message was edited by: ChoreoGraphics

I'm far from being an expert, but since no one has replied to you yet, and because I've been helped out here plenty of times, I'll post something and who knows -- it may be the answer.
Your post was really long but from what I can gather, you're wondering why your exported video does not look good when you open it in QuickTime. Try this: Open the video in QT, hit command-J, then click on Video Track, then at the bottom right (under Visual Settings) you'll see High Quality, Single Field, and Deinterlace. Click around on those to see if that improves what you see.

Video is not displaying in the latest shockwave

After updating to the latest version of Shockwave, .flv videos are not displaying. The audio is there but no video.
What is going on Adobe?

I agree - I am seeing an area where I presume video should be playing but I only hear the sound.
You won't find an Adobe representative or tech support here, just other users trying to help one another.
I assume Raymond that you are the content developer? Have you tried isolating the issue into a minimal file that could be submitted to Adobe as a bug report? I would suggest doing so as a start on getting your issue addressed. If you're lucky, doing so will lead you to find a solution, or perhaps a work-around. Create a file that only plays a video. You said earlier:
I use the Flash asset and call.import which ever video is needed.
perhaps you could post some code, or a link to a demo file that reproduces your problem

WinCE Projector does not display flash file properly

Hi,
I built a projector application for loading flash files on a
Windows CE 5.0 based embedded device. I am using Flash player 7 for
WinCE5.0. The projector was built using embedded VC++ for an ARM
processor.
The basic idea of this flash application is content delivery.
So, this projector loads a container flash file stored locally on
the device. This container flash file communicates with a remote
server(webserver or FMS) to retrieve content (flash files, audio,
video, images, text etc.). Right now, I am trying to load a series
of flash files from the remote server - one by one - like a series
of ads.
The problem is that, the series of flash files loaded does
not display properly inside the main container file. I am using a
loader component in the main container flash file. All the flash
files loaded must play full screen. But some files do not play
fullscreen. It automatically shrinks to a smaller random size. This
behaviour does not repeat. It occurs randomly for any of the series
of files I am trying to load in the container flash.
When i tested the application on the desktop, it works fine.
But on the device, the loaded flash files shrink automatically. Can
someone explain why this is happening? Is this problem usually
associated with flash player on embedded devices?
I am stuck with this problem for a long time. I tired
different methods to get around it, but could not succeed. So I
would really appreciate it, if anyone can throw some light on this
issue and preferably provide a solution?
Thank you,
Jothishankar

I am using Flash Professional CS6.
It lets me edit all the symbols and bitmaps, and key frames.
However, it just publishes as a SWF a bit incorrectly.

Image does not display on MacBook Pro (does on PowerBook G4!)

I created a slide in Keynote on my PowerBook G4 with an image dropped in (a pdf, I can't remember whether it was originally cut and past or dragged and dropped in). When transferring the Keynote presentation to a new macBook Pro (copying via a USB thumb drive), the presentation opens but the image does not display (everything else is OK).
The weird thing is that the image does show up in the thumbnail in Navigator View. It disappears in Light Table View, and then is gone when I return back to Navigator View. However, when I close and reopen the file, it appears again in the thumbnail.
When I click on the area where the image should be, the open squares show up around something. If I try to copy this object and past into another application (like Photoshop), I only get a blank image.
I have managed to get around this by laboriously copying the affected images on my PowerBook into separate pdf files, then transferring those files to my MacBook Pro and dropping them into place. However, I know I will find a missing image at some later date, when I no longer have access to my old PowerBook.
How to solve this problem?
P.S. Both machines are running Keynote 4.0.2 and Mac OS 10.5.2.

Thanks for taking a look!
The original image was created using Photoshop to cut out an image from a pdf file. Then it was either cut and pasted or dragged into Keynote.
Here are screenshots of what I get when I open the "droppedimage-17.pict" file (shown in the Show Package Contents window) using QuickTime on both machines. For the PowerBook:
http://www.cems.umn.edu/download/attachments/Powerbook.png
For the MacBook Pro:
http://www.cems.umn.edu/download/attachments/MacBook_Pro.png
Strangely, the Powerbook version looks like a correct grey-scale image, while the MacBook Pro looks like a B&W image.

Air book pro does not display apple tv

Apple tv was playing internet you tube video suddenly stopped... now does not display apple tv box on screen.

Hey Trumpet1954,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like the airplay icon is missing. Is it missing from inside iTunes or OS X? The first article is for if your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears. The second is for if it isn't in iTunes. The third article is if it is a network connection issue causing this problem. All of these can cause a frustrating situation for sure.
About AirPlay Mirroring in OS X
http://support.apple.com/kb/ht5404
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Have a nice day,
Mario

The control of adf media does not display even the Control attribute is set

Hi
I am trying to play a clip in a jspx page. I use an ADF media to embed the file and play the file by quicktime. I set the control display attribute to "all" or "typical" but the control does not display when the browser(FF) display the clip.
Can anyone help me?
Thanks

try adding mime-mapping in web.xml. Just a suggestion and I haven't tried this control.

Video does not play in Viewer or Canvas

Hi, I am new to Final Cut Pro. I just imported a couple of .mov files into FCP and have added them to a sequence. When I try to play the files on the Canvas, the video does not play (just shows the first frame). Same goes for Viewer window for an individual file. Help!

You can't really use H264 directly in Final Cut Pro without a lot of hassle.
Your audio has the wrong sampling rate. Digital audio for video is always 48000 kHz.
Use QuickTime Player or Compressor to export a copy of your files using the ProRes codec with the correct audio settings. Bring those into FCP.

Quicktime video does not display?

Similar Messages

Maybe you are looking for