Quicktime videos take forever to load on my system

Is it me alone, or does anyone have the same problem? I have a excellent system, and nothing takes forever to load on it, only Quicktime videos. The only reason why I use quicktime on my XP machine is to watch the videos that are downloaded from my Kodak camera memory card since the camera saves its video files as quicktime videos, but it takes forever for the video files to load after I have downloaded them and saved them into a folder on my system. When I want to go back and view the videos, the folder freezes until all the videos, even if it is only one video in the folder loads. Why is that? Other video files load immediatley from avi,wmv,to divx,etc.
Does anybody have a solution?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • I'm unable to steam flash videos in Firefox. I can view youtube videos, but nothing else. Some videos take forever to load and my webpages are starting load slo

    I can view youtube videos, but nothing else. Some videos take forever to load and my webpages are starting load slowly as well.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Recently my movies and videos take forever to load and when they start playing it's for a second or two at a time. Have to hit the play icon over and over, did not use to be this way they work great on my desktop and iPod

    Recently I have been experiencing my downloaded videos and online vids taking a long time to load and when they do, they will only play for a few seconds at best and you have to hit the play icon over and over. Never had this problem before with the 20 plus vids I have any suggestions would be appreciated

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • Videos take forever to load

    Why does it take so long for videos to load on my macbook?  what can I do to speed the process up?

    How large are the videos?  What protocol are you using?  USB 2 is the slowest.  Firewire is twice the speed of USB 2.  Do you have eSata capability?  Thunderbolt?
    Ciao.

  • Computer constantly crashes and now videos take forever to load and play.

    When I watch videos, doesn't matter where they come from, my computer hangs like crazy and half the time, I just abandon the video.  My computer also crashes constantly, yet everything is updated and in working order.  I could be in the middle of reading an article of news and all of the sudden the whole system goes black and blank and then after about 30 seconds the whole computer goes off.  I have cleaned it out with canned air and everything recommended.  Can I go back to Windows 8 and abandon 8.1 altogether?  I need help with these matters and in layman's terms please.  Why does this keep happening?  What viable solutions are there for all these problems?  Nothing started happening until my computer automatically updated with 8.1 and its now been a year of nightmares endlessly.  PLEASE HELP.
    Helpless and In Need of Fixing
    This question was solved.
    View Solution.

    I am no expert but I think there is an issue with Windows updates for 8.1 and HP desktops, my mouse was dragging, sound was staticy with humming and crackling and video would freeze intermittenly . What finally fixed my machine was a full recovery and blocking windows updates. Now my machine is perfect other than the fact that the beats sounds terrible. The beats work fine now they just sound terrible.

  • Quicktime X is incredibly slow and previews take forever to load

    Quicktime takes forever to load an MKV (Perian installed), but also takes its sweet time with other longer vidoes. Finder Previews (off to the side in column view) take forever to load, with QTserver (I think that's the process) taking up huge cpu resources while doing so.
    I want to love Quicktime, I really do. It looks great. But its performance is just utterly frustrating at times. I don't know what happened but I never had these problems with Quicktime 7.
    Why the does Quicktime behave like this?

    http://arstechnica.com/apple/reviews/2009/08/mac-os-x-10-6.ars/6#qtkit
    You don't have to use the X version of QuickTime on your Snow Leopard machine. You can use QuickTime Player 7.6.3 if you like.

  • Videos and maps, etc. take forever to load. This wasn't a problem before.

    Since I started using the new version all videos take forever as well as weather maps, etc. It is as if they never finish loading. It also reminds me of my first internet connection in 1994 or so.

    If you want to disable plugin-container, See this KB article:
    http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

  • Small Quicktime movies & music show as 'Q' icons - take FOREVER to load

    I have a site - joelplimmer.com (I created a re-direct - it's my iWeb .Mac site really) and the Quicktime content is taking forever to load - it USED to load fairly quickly - I have gone into 'package contents' in my 'domain' file in application support and looked at which files are too large - strangely, most are < 10 meg, but many of those are ones that take forever to load. I've minimized some of the larger files I had on the site - still no luck on .Mac (it looks fine when I publish to a folder, of course). So, I tried deleting EVERYTHING in my joelplimmer.com folder on my iDisk and re-publishing from scratch, STILL the same thing. I have tried this from different computers, both Mac & PC - with the same result. Does anyone know what could be the problem?

    Of course it takes ages to load.
    4 movies on a page, 6 audio files on a page, I lost count. I left before the encore.
    Most problems are not technical.
    Just using your brain will solve them. Try it.

  • Videos taking forever to load

    For some reason any video that uses quicktime takes forever to load and i have high speed internet so i dont understand why its going so slow. If anyone knows how to make it faster than please respond.

    A download of a video isn't much different than any other download and if the file server is busy then that download may appear to be slower than others.
    You'll need to get a faster ISP connection or find the file on another (less busy) server.
    Post a URL and we can see how fast it downloads.

  • File encoded with x264 takes forever to load in Encore CS 5.5

    I use Encore mostly because it takes h.264 video encoded with the x264 compressor, which provides much higher quality than any other compressor. The problem is that these files take forever to load. For example, right now I'm trying to load a video that is about 1 hour and 20 minutes long, encoded at 38 Mbps, and the file is 20.9 GBytes. Now it's 3 PM and I imported this file along with the AC3 file over an hour ago. The Encore process shows as not responding, but when I open the Windows 7 Resource Monitor, in the disk tab it shows that it's reading the video file at a rate of about 45 MB/s, so I didn't kill the Encore process. I know eventually it's going to stop and load the file, but I don't understand why it takes so long. The encoding parameters that I used in x264 are these:
    x264 --level 4.1 --bluray-compat --preset slow --bitrate 38000 --keyint 30 --min-keyint 2 --open-gop --weightp 0 --slices 4 --vbv-bufsize 30000 --vbv-maxrate 40000 --rc-lookahead 40 --tff --output "output" "input"
    This comes from a family video that is 1080 59.94i. This time these two parameters appeared because I selected Blu-ray as the target:  --bluray-compat and --open-gop, which I don't normally use, but still, even when I don't use them, video encoded with x264 takes forever to load. Does anybody here know what could be the problem?

    What's weird is last year I encoded a file that was almost two hours long and Encore took it without trouble, although it was CS5, not 5.5. Since I had kept the avs and bat files, and also the x264.exe from that encode, I brought them into the current working folder and I just modified the file names in the avs and bat files to point to the new avi and encode to the new h264 file. So I encoded this file, I imported it into Encore, and it still hangs. Maybe it was a change from CS5 to 5.1 that introduced a problem. x264 has been certified to be Blu-ray compliant since over a year ago, and I already put this file to a Blu-ray with TSMuxer, since it was a family video and I didn't really need menus, and it plays perfectly fine in my Blu-ray player.
    But I'm sure there must be something, one or two parameters that would make it compatible. For example, after encoding the file again the last time, now I can import it into Encore, and it doesn't stay frozen forever, but it doesn't show me the video and as soon as I try to move the timeline cursor it freezes and doesn't let me do anything for several minutes. So still it's not usable. But it's a change from the first encode where the progress dialog would be there for several hours and do nothing at all.

  • Browser pages take forever to load

    Every time I open Safari or Firefox, the pages take forever to load.  I keep getting the color wheel and often have to force quit.  I don't think it's the internet signal because I've tried it in 2 different locations (home and work) and the results are the same.  I can't load videos (like those on Hulu).  My computer memory is about half full, so I don't think it's that.  This is a recent problem (within the last week).  Any suggestions?

    See if this FAQ will help: http://www.thexlab.com/faqs/sbbod.html

  • Calendar and reminders take forever to load with ios5

    Since I upgraded my iPhone 4 to ios 5, my calendar and reminders take forever to load. Sometimes they crash rather than load. Any suggestions? This is extremely frustrating. By the time they load, I forget what I was going to write. Even once they open and I start entering data, they usually stall or crash during the time I am entering information (e.g. setting alerts), so it takes a very long time to enter each appointment or reminder. Help please!

    I'm having the same issue.  Ay fixes?  Bought ATV today, music streams but videos don't and mirroring doesn't work either.  Start mirror and severe lag then just drops.  Been trying for couple hours. About ready to return it.

  • Why do thumbnails take forever to load?

    As the title suggests - why do the thumbnails take forever to load?. It is incredibly frustrating as I'm dealing with over 500 clips and I have to wait for these thumbnails to load. I come from Avid and decided to switch to Premier because of the available workflows. I've never had this issue using Avid so I know for sure it has nothing to do with my system. Any ideas? Furthermore, the media say that it is pending every now and them, why is this?

    Same issue. I've chatted with customer support and I'll summarize how helpful they were.
    Customer support took control of my computer in order to try and resolve the problem. I'm not sure what they did but they made everything WORSE. They deleted all my cache and did a whole bunch of other crap. Thumbnails don't load anymore - period. Questions regarding my other concerns - media pending, videos not playing, audio not importing - were completely ignored. Now here is where it gets better. This guy helping me out didn't respond for 30 minutes, I was wondering if he was further looking into it, but then it hit 7PM, when customer service closes. Apparently when the going gets tough and they have no idea how to resolve a situation, Adobe bleeds out and waits for 7PM to hit so they can just brush us off. I'm pissed.
    Looks like I'm going back to Avid and just round trip to Divinci.

  • Macbook takes forever to load websites and often they won't load at all - yet my pc flies along

    macbook takes forever to load websites and often they won't load at all - yet my pc flies along
    I downloaded the Open DNS thing and I havne't got a masters degree in computers - so i haven't a clue what it does or what its supposed to do.
    Overall i'm really really sorry i bought an apple and i won't be doing it again - i just need it to access the web properly!

    When i click to 'go to video' a page opens onto eurosport but the video won't appear - there's just a blank spot on the page where it should be.
    i get some of the pictures on the page but lots of black squares where other pictures should be.
    Make sure you have the following installed:
    Flip4Mac
    VLC Media Player
    Perian
    Adobe Flash Player Software
    After the installations, repair permissions and restart your computer.
    I downloaded the Open DNS thing and I havne't got a masters degree in computers - so i haven't a clue what it does or what its supposed to do.
    Uninstall it asap.  In order to avoid damaging your system/directory which can result in costly repairs, never install software if you do not know what it does and/or you have no clue on how to use it.  If the software comes w/instructions (Read Me file), read it prior to installation.

  • Pata_amd takes forever to load hanging at "[solved]

    kernel26beyond 2.6.19.beyond1-1
    Basically its a kernel 2.6.19 problem for me, where udev takes forever to load. I've narrowed it down to the problem module and its pata_amd. loading it with modprobe -v showed no errors, just takes 2 min or so to load. I've tried to blacklist the module, and oddly enough my hd works fine but my network doesn't work anymore "no route to host".
    Using DFI nforce 4 (so no intel controller). sata II HD. turned off my cdrom in the bios (ide) just to be safe.
    Here's some errors I noticed in logs
    dmesg:
    ata5.00: ATAPI, max UDMA/33
    ata5.01: qc timeout (cmd 0xa1)
    ata5.01: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata5: failed to recover some devices, retrying in 5 secs
    ata5.01: qc timeout (cmd 0xa1)
    ata5.01: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata5: failed to recover some devices, retrying in 5 secs
    ata5.01: qc timeout (cmd 0xa1)
    ata5.01: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata5: failed to recover some devices, retrying in 5 secs
    ata5.00: configured for UDMA/33
    scsi5 : pata_amd
    ata6: port disabled. ignoring.
    ata6: reset failed, giving up
    scsi 4:0:0:0: CD-ROM BENQ DVD DD DW1640 BSMB PQ: 0 ANSI: 5
    ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ
    20
    hwdetect --show-modules:
    AGP : agpgart
    IDE : ide-core amd74xx generic
    SCSI : sd_mod sg sr_mod
    SATA : ata_generic pata_amd sata_nv
    USB : usb-storage usblp usbhid usbcore ohci-hcd
    NET : forcedeth sk98lin skge
    SOUND : snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-bus snd-ac97-codec snd-intel8x0 soundcore
    VIDEO : nvidia
    OTHER : cdrom rtc k8temp i2c-nforce2 i2c-core evdev ff-memless pcspkr pci_hotplug shpchp ata_generic pata_amd
    Solved: FINALLY!
    http://bbs.archlinux.org/viewtopic.php?t=28109
    basically just gotta blacklist pata_amd and ata_generic. for some reason only blacklisting pata_amd would break my internet. *shrug*

    Pierre wrote:
    Strange, I have a similar setup and pata is not loaded when using the following hooks:
    HOOKS="base udev autodetect sata filesystems"
    But if this still does not work, blacklist pata_amd and load amd74xx via rc.conf.
    I'm speaking mainly from memory, I'll check it out when I get home from work. It aperantly failed booting up this morning, so I can't ssh in to try and fix it
    Thanks for the help so far btw, been going crazy about this problem.
    EDIT: Update (figured I won't make a new post)
    Ok basically I tested it out a bit with different results:
    Kernel26: takes 2-3 min at udev then boots up and works fine.
    kernel26beyond1: takes 2-3 min at udev then hangs at "mounting filesystem"
    kernel26beyond2: takes 2-3 min at udev, then boots fine, but internet doesn't work.
    Disabling pata_amd: breaks internet.
    HOOKS="base udev autodetect sata scsi filesystems resume"

Maybe you are looking for