QuickTime Will Not Install

I downloaded QuickTime 7.5.5 from Apple.com and I tried to install the program. I got through all the installation windows except for the last one. The status bar that shows how much of the program has installed and how much longer the installation process should take stops at 86% and 85%. The time remaining maintains a "less than a minute" notification but, it never finishes. I let the installation try to continue for roughly 20 minutes but, no luck. I will probably call for support on this problem, but I didn't know if anyone else ran into this problem, or if anyone knows how to fix this. I don't use QuickTime all that much, but I do use iTunes a lot and it appears that the newest version of iTunes (8.0) will not open without the latest QuickTime.
Thanks for any help anyone can provide.

Hi QandAknowit(noquite)all and welcome to the forums!
Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417

Similar Messages

  • Quicktime will not install on my PC - also stopping iTunes from working

    Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
    Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
    From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
    I am using the latest installers for each and I can't understand why this is happening,
    I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
    Please help me fix this error where Quicktime can't install,
    Thanks
    James

    Says windows install package does not operate yet I can install other programs.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • Itunes wont open and quicktime will not install. help?

    someone please help. my itunes will not open since i preformed an update (it has not been updated for a few years). i have noticed i no longer have quicktime on my laptop but cant re-install. i get to the 'welcome to quicktime 7 installer' screen, press next and windows installer stops working. some one please help.
    i am running windows vista.
    many thanks

    windows installer has stopped working
    a problem caused the program to stop working correctly.
    windows will close the program and notify you if a solution is avabilable.
    ... and that's one that I wasn't thinking of ...
    Head into your Windows Update. Are there any new updates available for you? If so, and you install, does that clear up the error message?

  • Itunes and quicktime will NOT install

    I have been trying to re-install itunes and now quicktime onto my computer.
    I get 3 messages. 1st one says that the install cannot find a file that does not seem to exist on my system. I tried find the file through its directory, cant find it!! It is a long directory with lots of numeric, very little alpha characters.
    Next message is "error 1714" The older version of itunes cannot be removed. Contact tech support.
    Next message "error 1603" Fatal error during installation. consult window installer help (msi.chm) or MSDN for more info.
    I have looked for help on many posts and apple's site. I have tried to manually remove quicktime and itunes and it will not remove the old versions????
    Someone please help me!!!!

    windows installer has stopped working
    a problem caused the program to stop working correctly.
    windows will close the program and notify you if a solution is avabilable.
    ... and that's one that I wasn't thinking of ...
    Head into your Windows Update. Are there any new updates available for you? If so, and you install, does that clear up the error message?

  • Itunes/quicktime will not install

    I am trying to udgrade my intunes to the newest version (7.34) to add music to my 2nd genertaion ipod nano. The installer will not even open giving the error message of invalid drive J:/. I already tried changing my ipod's drvie letter to (k) but it still shows the error message ivalid drive J:/.
    Any suggestions?
    Thank you

    You obviously don't need 7.3 or 7.4 for 2nd gen Nano.
    It seems your system's temporary directory setting has been messed up so that the installer cannot unstuff itself.

  • ITunes and Quicktime WILL NOT install no matter what!

    After downloading QuickTime with iTunes, I keep getting this error:
    "An exception occurred while trying to run m"C\Widows\system32\shell32.dll,Cotrol_RunDLL "C\
    Windows\system32\QuickTime.cpl",QuickTime
    iTunes won't install, QuickTime won't install, Customer support doesn't know what to tell me---
    Has anyone else had this problem-- and better yes, does anyone know how to fix this? My laptop is about 6 months old, running Windows XP Media Edition. (Big sigh)

    Deal Emalve,
    Try change the path from C: to any other directory and then install..
    Hope that works out.

  • Quicktime will not install, uninstall, neither will itunes

    i've tried to find the answer to my question on the forum and have even tried some of the suggestions, but to no avail.
    i too received a new ipod nanp for christmas. i also have a 40GB ipod. i needed to install the new version of itunes, and subsequently quicktime, but no matter what i do i an receiving the message that there is a problem with the file "c:\ProgramFiles\QuickTime\PropertyPanels\PropPanelHelpers.Resources\nl.lproj
    i am unable to install the new version, and i am unable to unstall the old version...
    send me any suggestions you have.
    i'll try anything!
    thanks!

    I had the exact same problem and the solution below from "b noir" resolved it. I cut and past from bnoir's post, and I don't know if the link to microsoft's window's cleanup utitlity will work. If not, just do a search on your topic is the disscussion groups. The solution was posted on October 6 (or the original question was posted --I'm new at this).
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    Next, we’ll manually remove leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.

  • ITunes or Quicktime will not install

    I have looked at other topics related to the problems i am having about installing iTunes and quicktime. Nothing seems to work. I have completely uninstalled everything i could find regarding itunes and quicktime. Then attempted to reinstall them. I have tried installing quicktime first, this doesn't work. I have also tried installing both together, and this does not work either. I live in Canada and have a compaq presario computer with windows XP. I dont see the problem here.
    When trying to install itunes + quicktime it will continue through the entire process successfully then a message will appear right before comletion reading "HKEYLOCALMACHINE/software/classes/quicktime.quicktime/CLSID. Verify that your have sufficient access to that key, or contact your support personnel." .... then it will roll back action and nothing is installed....
    I just purchased a new iPod Nano, and it told me to upgrade my version of iTunes..... and as you can see i simply can not. If anyone has an idea of what to do in my situation please respond and inform me on what i can do.

    not sure about your problem but i managed to fix mine
    i restored my computer to back a few days ago (before i started messing about with it) this did work so i had to start in safe mode to do it.
    after this i manually uninstalled QT and itunes from the add/remove programs section in the control panel. Then i downloaded the installer clean-up program from microsoft and deleted all remaining QT and itunes files, after this all installations worked fine.
    i hope this can help you out also.

  • Quicktime will not install - no errors or notices

    Hi,
    I am trying to install iTunes + Quicktime off of the cd I received with my iPod 5G. I am using Windows XP. It allows me to install the ipod for windows software, then itunes, but when it tries to install Quicktime, the progress bar will continuously loop, i.e. it will make it to 100%, then go back down to 0% and start all over again. It does not give me any errors. I formerly had a 1608 error, but I solved that by typing ("C:\Program Files\Common Files\InstallShield\Driver\8\Intel 32\IDriver.exe" -Embedding) into the "Run" dialog box in the start menu. I have tried installing an older version of quicktime (Version 6), which worked, but the installer would still try to install over it, leading to the loop problem.
    Thanks in advance to anyone that can help

    I am having the same problem as you. I tried to install itunes 6.0 on my windows 2000 machine with sp4. It goes through part of the installshield wizard setup and then the install window minimizes and after that nothing happens. There are no error messages either. I have tried the following...
    1) Install itunes from my new Ipod CD.
    2) Install itunes from a download from apple website.
    3) Install itunes 5.0 which didnt work either and gave me the same error
    4) Install an older version (4.9) of itunes which worked but is not compatible with my new IPOD
    I have the latest updates for my windows. PLEASE HELP

  • Quicktime will not install with Polonizator

    I have tried to install the newest quicktime update. The Software update preference panel did not show the update, but I downloaded it manually.
    The installer says "Cannot install QuickTime on this volume. This software does not contain support for your system language".
    Likewise the newest iTunes software says "You cannot install iTunes on this volume. You are not allowed to install the software on this disk for an unknown reason".
    This is strange as the language preferences is set to American English.
    It seems that the "Polonizator" Disk modifies the system software so that it becomes impossible to use the update mechanism in Mac OS X.
    Maybe file a bug ???
    Mac Book Pro 2.33 Ghz Core Duo 2   Mac OS X (10.4.8)   2 GB Ram

    Some kind of torrent thing...I guess.

  • Quicktime will not install to Windows Vista "could not open key..."

    I have been trying to install Quicktime for some time.
    Get error message: "Could not open key: UNKNOWN\Components\9c430...... Verify that you have sufficient access to that key, or contact your local support personnel." The installer then rolls back.
    I kept trying and was able to install QT, but it would not open. Error messagesaid something about a "side-by-side" configuration.
    I am the only user/administrator of this pc. I have tried all troubleshooting steps on this website, including uninstalling all Apple software and all remnants.
    I tried all troubleshooting steps. My next step is to re-install Windows.
    HP d5000t Windows Vista Vista Ultimate 64-bit, Intel core2 quad Q9450 @ 2.66GHz 8GB RAM

    Get error message: "Could not open key: UNKNOWN\Components\9c430...... Verify that you have sufficient access to that key, or contact your local support personnel." The installer then rolls back.
    Doublechecking, Alex. Have you tried the procedures from the following post?
    http://discussions.apple.com/thread.jspa?threadID=2475687&tstart=30
    (Although that's about an iTunes install problem on 7 rather than QuickTime install problem on Vista, similar sorts of troubleshooting proicedures can apply in your circumstances too.)

  • Quicktime will not install because of it thinks there is a newer version already installed.

    I don't even have QuickTime installed and it is telling me it cannot install because of a newer version already installed.  I have searched completely and found nothing.  I have Windows XP and am trying to install the latest version of QuickTime.  

      Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up").
    In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

  • QuickTime Will Not Install - Key Error

    I'm using a validated Microsoft Windows XP Home Edition.
    I can't get QuickTime to install. I had it installed previously, but I deleted it. I tried to install it again and again, but I still keep getting this exact same error:
    http://img295.imageshack.us/img295/5086/quicktimescrewedupnb6.jpg
    I have no idea what to do. Please help. Assistance would be most appreciated.

    This post by Primus Bodacious seems to have helped
    http://discussions.apple.com/thread.jspa?messageID=3352406&#3352406

  • Quicktime latest version will not install

    I Quicktime did not install
    I have old itunes but got iphone today it requires latest itunes but quicktime will not install. I updated VBScript but stil get error code 2738
    Help!

    Here are a couple of articles from that Apple Support site that might help.
    http://docs.info.apple.com/article.html?artnum=304405
    http://docs.info.apple.com/article.html?artnum=93976

  • HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    Many thanks.
    Error 7 (Windows error 127)
    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • Fusion drive and mac mini overall

    greetings, i'm thinking about getting a mac mini to augment my macbook pro. essentially i'm thinking of pulling my itunes, etc off my MBP to the mini.  does anyone have experience or feedback on the fusion drive.  i'm not sure i need it, but sometime

  • My iPod touch, fourth gen, will not charge or be recognized by computer.

    My iPod touch, fourth gen, wont charge or be recognized by my computer. This computer has worked with my iPod before and the wall charger also works. But when i plugged it into the wall charger it didn't work. I tried a different cable and tried my c

  • OIM11gR2 : BP06 Patch deployment error

    Hello Experts, I am trying to apply BP06 patch to OIM 11gR2. I get the following error in the logs when i run opatch apply : [May 6, 2013 10:27:58 PM] Command invocation returned Error... 'chmod: cannot access `/users/oim/Oracle/Middleware/oracle_com

  • Posting idocs in sequence in SAP from file (without BPM)

    Hi, I have a requirement of posting the TWO idocs from the single file. But I need to send the idocs in sequence. Can you anyone explain the process  how we can ecomplish from XI without using BPM.

  • Who can say something about TCode:CKM3.

    Now I am headache of TCode CKM3,our customer user the materila ledger and profit center account.So they often find the price difference between the FI and PCA when they use the TCode CKM3,and I need explain the reason to them. But I dont know the usa