Quicktime will not work in Windows

For the past few months, I've experienced trouble with Quicktime. I would try to view a video on Apples website, and it would fizz out like a bad tv broadcast, then lockup saying there was an error, report, blah blah. I figured it was Apples website. Well today I tried to install a Total Training video, and when it searched for Quicktime, I got the same error, the program install locked up, and asked me to report the error, etc. I've tried uninstalling and reinstalling, no luck. Please help!

Lets do a few things.
1. Update QuickTime. http://www.apple.com/quicktime/download/
2. Open up QuickTime player.
3. Click on Edit> QuickTime Preferences>Advanced.
4. In the center of this section there is a "Video" section select Safe Mode.
5. Click on Ok and go ahead and close out of QuickTime.
I have also noted that there are SEVERAL bugs with QuickTime and Nvidia Chips.
A few things I suggest you do is to update all of your drivers, and install any pending Windows Updates.
Please post if this worked for you.
JMG- Not associated with Apple.

Similar Messages

  • Adobe photoshop elements 13 trial version will not work on windows XP. Does this mean that if I purchase the full version, this also will not work on XP?

    I have Photoshop Elements 12 and want to try version 13 before I buy. However, when I tried to download the trial version of Adobe Photoshop Elements 13, I was informed that it isa not available on Windows XP. Does this mean that if I buy the full version, it will not work on Windows XP?

    Yes, if the system requirements do not include XP then an XP machine will not be able to use it.
    System Requirements
    Windows
    1.6GHz or faster processor with SSE2 support
    Microsoft Windows 7 or Windows 8 (32-bit versions will be installed on 32-bit systems; 64-bit versions will be installed on 64-bit systems)
    2GB of RAM
    5GB of available hard-disk space
    (additional free space required during installation)
    1024x768 display resolution (at 100% scale factor)
    Microsoft DirectX 9 or 10 compatible display driver
    DVD-ROM drive (for installation from DVD)
    QuickTime 7 software
    Internet connection required for product activation and content download* 

  • TS1538 Ipod Classic will not work with Windows 8. Is there a fix?

    Itunes will not work with Windows 8. I have the latest version of itunes!
    When will the fix be available?
    When I try to Sync my ipod, nothing happens.

    Hi,
    You can download the latest official Firefox here: https://www.mozilla.org/en-US/firefox/new/
    You may also have to install [http://www.oracle.com/technetwork/java/javase/downloads/jre7u9-downloads-1859586.html Java] (choose either Windows x86 Offline or Windows x86 Online), and [http://get.adobe.com/flashplayer/ Flash] (choose the Firefox version and also deselect extras).
    For the Firefox metro version, please see [https://wiki.mozilla.org/Firefox/Windows_8_Integration#Elm_Nightly_Builds this]. You can install and use it along with the other version.

  • PSE13 trial version and it will not work with Windows 7

    I have downloaded PSE13 trial version and it will not work with Windows 7

    I have been using PSE 13 for 3 months with no problems.   When I launch the Editor in PSE 13 this is what I get -
    "Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
    RAM 12.0GB
    64 bit operating system
    Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
    Windows 7 SP1
    Hope this helps.
    Lynne

  • Amd suitchable graphics with hd6670 (and intell 3000 ) will not work on windows 10

    hi there i have amd suitchable graphics with intell , and the amd will not work on windows 10 pro x64 the actual model of the amd is HD 6670 but is using the drivers of the hd6470. in any case it will not work in windows 10 pro x64 after a clean install. please any help thanks

    Have you disabled the firewall in you security system?  Windows firewall rarely gets in the way, but security systems' do.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HDX 9010nr, Radeon 2600 will not work with WIndows 7

    Apparently, HP is not going to support the HDX 9010nr for Windows 7.  That's the bad news, the good news is that it "mostly" works. 
    The only big issue is that the display driver stops every few minutes and then restarts.  So you sit there for thirty seconds while the machine recovers.  But, it doesn’t support a second screen; and worse, every 10th time the video driver crashes; it locks up the whole machine. 
     ATI has a version of the Radeon 2600 software that worked with the Release Candidate (RC) of Windows 7, but it will not work with the shipped version of Windows 7.  ATI recommends that you get a version from your hardware vendor.  Which brings me back to the first sentence.  HP isn't supporting the 9010nr. 
    The question is do any of the "supported" HP laptops have the ATI Radeon 2600?  If so, might that work on the HDX 9010nr? 
    This question was solved.
    View Solution.

    Updating the BIOS solved this problem.

  • Perifials will not work with Windows 7

    I have a new HP h8 1214 PC WiFi with Windows 7 installed.  My old HP ScanJet 4850 and my HP Personal Media Driove 1600 will not install. My previous operating system was XP. 
    I would like to install the ScanJet 4850 because it can send slides and film strips to my computer to be used in a slide show with Adobe Photoshop Elements and  Adobe Premiere. I have started a slide show of these items and did not get all of the slides transferred before my old computer conked out.
    I would like to use my Personal Media Drive for backup and it also has pictures I would like to be able to obtain.
    I don't know if perifials that are not WiFi will install on a WiFi computer.  Apparently not!
    Any help will be greatly appreciated,
    flyingjewel

    The reason the CD will not work is evident. The CD is for Windows 98,  XP Home or XP Professional.
    The WIN 7 64bit downloaded driver file is what you need. Download and install the driver.
    Here is a link  ( see pg 5 and 11) that discussed the power supply for a PMD drive, your's may vary. But you must have a power supply (modular plug with cord), or brick/adapter (has AC cord into power supply, then another cord that supplies DC).
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • My scanner on the MF4370dn will not work with Windows 8 or 8.1.

    I have a Canon MF4370dn which the scanner portion has not worked right since I got a computer with windows 8 and will not work at all since I downloaded windows 8.1.
    I have reloaded the scanner tools, tried the Presto! PageManager that came with the oomputer. I have downloaded the latest drivers for the scanner from the site.
    It worked with Windows 7 fine, but that computer no longer is functional and I use my scanner often.
    Any ideas?
    Solved!
    Go to Solution.

    Fixed my own problem by redownloading and installing the Windows 8 (x64) drivers and the toolbox software. Thanks anyway.

  • Quicktime Will not work

    Hi, I recently got Photoshop CS3 which requires Quicktime for video editing. So, I instaled quicktime but when I tried to run it, a window popped up saying that 'quicktime has stoped working'. It never realy opened, though. I've tried re-installing it a bunch of times, repairing it, completely removing it and puting it back on, and it always says its installed just fine. but then it will not run. An alert always just pops up saying 'quicktime has stpped working'. I would really greatly appreciate it if you could help.

    i just figured it out. i was on myspace and i right clicked and went to plug-in setting and looked under browser and i clicked on MiMe setting and then i clicked on use defaults and that worked

  • Quicktime Will Not Close Open Windows

    After I record a video Quicktime refuses to close any windows from those recordings.  When the red X is clicked quicktime will lag out for a few seconds at the end of which the window has not been closed.  The only way to get the window to close is to quit Quicktime with the "Close windows when quitting an application" preference enabled in the System Preferences > General.  If this preference is not enabled, Quicktime will refuse to quit and the program must be Force Quit.
    I've gone and done the usual troubleshooting steps like rebooting, deleting preferences, etc...  This does not solve this issue leading me to believe it's either a poorly thought out "feature" or a bug.  Unless there is some new paradigm of closing windows that I am not familiar with of closing window, thanks to Apple;s new paradigm of changing tried and true methodologies for new "simpler", "let us do that for you" ones, this is extremely annoying for someone who want to itterate through multiple video takes quickly without unnecessarily tieing up system resources.  If I make a video that I don't want I want to just trash it and be done with it.
    Anyway, does anyone know if there is any way to fix this so that I don't have dozens of videos active?

    Lets do a few things.
    1. Update QuickTime. http://www.apple.com/quicktime/download/
    2. Open up QuickTime player.
    3. Click on Edit> QuickTime Preferences>Advanced.
    4. In the center of this section there is a "Video" section select Safe Mode.
    5. Click on Ok and go ahead and close out of QuickTime.
    I have also noted that there are SEVERAL bugs with QuickTime and Nvidia Chips.
    A few things I suggest you do is to update all of your drivers, and install any pending Windows Updates.
    Please post if this worked for you.
    JMG- Not associated with Apple.

  • Quicktime will not update in Windows

    when I try to update QuickTime, (windows7 ) I get an error code that there are insufficient privileges to access the start menu folder for QuickTime. I have tried  n as admin, changed ownership of the folder.With out this I can not update ITunes. By the way I tunes will not uninstall ether. Any help would be appreciated.

    Lets do a few things.
    1. Update QuickTime. http://www.apple.com/quicktime/download/
    2. Open up QuickTime player.
    3. Click on Edit> QuickTime Preferences>Advanced.
    4. In the center of this section there is a "Video" section select Safe Mode.
    5. Click on Ok and go ahead and close out of QuickTime.
    I have also noted that there are SEVERAL bugs with QuickTime and Nvidia Chips.
    A few things I suggest you do is to update all of your drivers, and install any pending Windows Updates.
    Please post if this worked for you.
    JMG- Not associated with Apple.

  • HP C6180 will not work on windows 7

    OK, I have seen that other people are having this same problem in other threads but I cannot see it resolved anywhere.
    This is the problem.
    My C6180 worked perfectly on my old PC with Vista.
    I now have a new PC with Windows 7 64 bit.
    I downloaded the new software & drivers from HP for my printer and operating system.
    It installs to the point that it wants to detect the printer on the network.
    When it tries to do this it comes up with the message 'We were unable to locate your printer on the wireless network'
    I have tried connecting both by ethernet and wirelessly.
    Neither option can find the printer.
    It then gives you the option under advanced options to search by IP address. I have tried this too and still no good.
    The printer is working fine with other PC's on the network running Vista & XP, so the printer is connected to the network fine.
    Funnily enough, my PC can also find the printer and I can even print from it directly from other programs, but cannot adjust any properties or scan or fax.
    HP solution center will not open because it states that 'HP solution center cannot run because your device installation is not complete'
    I have tried every option I can think of and non of them work.
    I have spent around 10 hours tring to resolve this as I desperately need to scan and adjust printer properties.
    If no one can help I will have to go and buy a different printer which will be a great shame as I only recently purchased this one and think it is great (or at least I did on Vista!)
    Please can somebody with some knowledge or somebody that has finally worked this problem out please help me?
    I am at my wits end.
    Here's hoping.
    Many thanks.
    This question was solved.
    View Solution.

    Have you disabled the firewall in you security system?  Windows firewall rarely gets in the way, but security systems' do.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP 2311C USB Monitor will not work with Windows 8.1

    Just done a clean install of Windows 8.1 on my HP Spectre XT Pro.
    The HP2311C monitor is working fine as a USB hub and the built-in Network card but will not detect the monitor as a USB monitor.
    This was working when it was a Windows 8 build and previous Windows 7 build.
    I have downloaded and installed all the HP drivers and run the HP Support Assistant to make sure everything is up to date.
    My two other collegues who have done the same upgrade with the same kit and are also having the problem.
    If we plug the HP2311C into a Windows 8 or Windows 7 machine the USB monitor works fine.
    Tried several reboots, connections and uninstalls, which have not worked. Also there are no event logs to suggest an anwser.

    I am having the same problem with my SPECTRE PRO 13 and Windows 8.1 - most unhappy about it. There is no 8.1 driver for the L2311c and I get no help out of HP as to when there might be one . These items are not cheap in NZ and I feel I have wasted my $$. It works fine on XP!

  • Firefox v. 29 will not work with Windows XP in accessing Comcast email.

    My Comcast email will not load and I cannot access any email after installing Firefox v. 29. I went to Microsoft web site and installed the Service Pack 3 for Windows XP. This did not help. Do I need to reinstall Firefox 28? The only other solution is to get a new computer it seems with Windows 8.1 and I'd rather not unless absolutely essential.

    Moses: a tech rep at Comcast finally told me they needed to do some upgrades to make the full version of their email program compatible with Firefox 29. He set the email on 'Lite' which seems to work. This was the 4th call to Comcast! Now email seems to be working due to this change. Thanks for the suggestions.

  • Printer will not work on window 7

    I have a Lexmark 4200 series printer and downloaded the cd on windows 7. It will not print. I try installing the program and then I was going to try and reinstalling but when I do it says you can't install until the printer is through printing?? 

    Open Devices and Printers in Control Panel. Right-click the printer in questions and click Remove Device.
       Install a printer
    Is this the driver download?
       cjb4200Win7en.exe
    If you wish to discuss this further, tell us which computer you have. 
    -Jerry

Maybe you are looking for