Quicktime with ? in chrome browser...

Hi everyone...
i got a macbook pro with Mac OS X 10.6.8 and Google chrome 17.0.963.78 (the last version) as browser  (more faster then safari ...DEFENITELY )
i was watching into apple's web site, the new video about ipad 3... when i click on play, image of Quicktime appear in a middle of the window with the "?" on it.
i tried also to instal perian...but doesn't works anyway.
i tried to go in another website with page having quicktime... (i don't know if i can put the link of this website...)  and here is ok.
here where quicktime works ---->  http://web.me.com/efdme/giovenzano/home.html
here where doesn't works ---->   http://www.apple.com/it/ipad/#video

Hi again even if i'm answering to my own!!! ahahhaha
anyway
After a lot of test to try to figure out from this stupid problem, finally i found something.
I've reinstalled Snow leopard and i tried to go again into apple's web site to control if the movie works. and was ok.
so
next day, i went at work (i'm a computer programmer)and from here (where we have restriction about proxy connection) i tried again the video... message appeared : "Plug-in quicktime is locked". at that point, i refreshed the page and the same image(as above) appear with "?"...
when i saw that image,my expression was like--->
after that, i was watching(into the same apple's web site) other movies and those works.
i was very nervous and confuse until when i was looking into AMERICAN apple's web site, the same movie; and there works!
O_O
i've understand there was some kind of problem with operation system's cache (not browser cache).
i've cleaned it(with CleanMyMac)  and everything works again also the first page (italian) with the "?".
Conclusion:
If you have Quicktime.plugin into library folder, it's a problem about cache. clean it and u'll see everything will be ok again
Hi folks and sorry for my english

Similar Messages

  • Reflow with the Chrome browser

    I'm having difficulty with Edge Reflow (or Chrome?) not display the preview in the Chome browser. Chrome will open the Reflow preview intially but after a few seconds the screen goes blank. This is problematic since I'm trying to use Edge Inspect to view my prototype on my mobile devices.
    Any ideas?

    Chrome version - 34.0.1847.131
    Edge Reflow version - 0.42.15851 (preview) (could this be the reason "preview"?)
    I work at a university and we have been working with Adobe to get the educational agreement for CC. The IT guy set me up with this version of CC.
    Edge Inspect works on my devices with the chrome browser, I just can't get the preview of the reflow screen to stay.

  • I know this may be a lame question, but can I use Thunderbird with my Chrome browser and gmail account?

    I don't presently have firefox browser and have been very comfortable with Chrome for years now; can I use Thunderbird with my Chrome browser? I want to manage a large mailing list for a non-profit group that wants me to use Thunderbird.
    thank you,
    Reuben

    If you got someone else email than that's a BIG error and it has nothing to do with whatever client you are using. You send your credentials to gmail and they connected to another account, not even Google would like to do that.
    Either you send the wrong credentials and then you happend to have the same password as this other account. Try using webmail on that account.
    Change your password!!! If you can access that account he/she can access yours.

  • Scrolling effects in Muse are not working properly with the Chrome browser at the moment.

    My scrolling effects in Muse are not working properly in the Chrome browser .I disabled any third party widgets to see if that was the problem but it wasn't. Safari and firefox presented my site perfectly but when it was opened in chrome the menu navigation bar will not stop moving uncontrollably jittering when the page is scrolled. Does anyone know what I can do to fix this? My site is danieltoruno01.businesscatalyst.com

    We are using Vertical spry menu bar features provided with Dreamweaver CS3.
    You are using Spry 1.4.
    The latest  version of the Adobe Spry Framework is 1.6.1, this is the same version  that ships with Dreamweaver CS4.
    When using Dreamweaver CS3 (uses Spry  1.4), it's wise to upgrade your files to the latest version. This can  easily be done using the Spry Updater that can be found here.
    If after that you still have problems, please come back here.
    Ben

  • SWF is not loading in Google Chrome browser.

    Hello,
    My project is developed in adobe flash builder which used sdk 4.0.
    But from last few month it creates one problem with Google Chrome browser.
    Some times swf which reside in my .aspx page is not loading and i am getting white background in swf.
    This is looke like flash player does not rendering proper so i show white back ground in swf.
    But when i try this link in different tab then it is working.
    Any one have idea how can i solve this issue ?
    OS System          :   Window 7
    Chome  Version  :   28.0.1500.72
    Thanks,
    Mohit

    Best way is to try to catch it in the debugger.  If you search the internet, other folks have had problems.  Some are bugs in the google chrome version of Flash, but for others, small differences in the stage size caused their app to never finish its initial layout.
    -Alex

  • How come when I export my WebHelp, it will not load correctly in the Google Chrome browser?

    It seems to only be an issue with the Chrome browser. The help works in both IE and Firefox. Since Google Chrome is a very popular browser and many people have it set as their default, this is quite disconcerting.
    I am using RoboHelp Version 9.0.2.
    Thank you.

    Could the help not be stored on your customers' own web servers? That's how we deal with that scenario.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Jittery animation in Chrome Browser

    Hi,
    Has anyone had any issues with the Chrome browser where the animation is not smooth running? I have created this ecard (with sound) which works fine on all the other latest browsers except for Chrome. I have narrowed it down to the snow falling which is creating the issue but dont know how I can resolve this.
    Here is a link to the test area http://www.peacehospice.co.uk/egreeting/egreeting.html
    I have reduced down the images but it didnt correct the issue.
    Cheers for any help in advance.
    Andrew

    Hi Sarah,
    Thanks for taking a look, I have uploaded it here but removed the sound to make it smaller file size http://www.chaplinmultimedia.co.uk/client/egreeting.zip
    The version I have is Version 23.0.1271.64 m on Chrome
    Cheers,
    Andrew

  • Chrome Browser...sign-in hell...(browser and sites)

    Anyone having sign-in, cookie and password issues with Google Chrome Browser? Updated
    I am in signing-in hell     with one particular computer (this one) and have spent days trying to rectify it.
    Basically..Chrome normally opens ( after computer shutdown)  with my Chrome themes and bookmarks and cookies recognised.
    This computer now behaves completely differently from the other three I regularly use and I can not find any setting or way to make it "behave"!  I have tried every solution on the web ( its an issue for many)
    LIke others..this just started randomly one day.  Nothing to do with Antivirus/malware software ( cos there aint none)
    Without a fresh  sign in and a fresh synch and a bunch of palava to run through ...I am in default CHROME BROWSER "new install state"....then to access sites..I have to re enter passwords / usernames that I have asked to be remembered.
    The other computers have no problem...just this one.
    I have done a number of reinstalls and system cleans (eg registry etc)
    I am at the point of reverting to Internet Explorer despite its demise and redundancy.

    OK
    Here I am in IE  for last  hour plus...and wondering why I ever left it for Chrome.
    Working fine and it has the respect to remember me and my settings and site passwords etc. 
    Also wondering why its redundant and no longer supported by MS?
    Thinking that the fact its not "Cloud" connected with sign in and tracking etc issues is a good thing ..but also why its getting dumped.
    What browser is every on else using on Windows systems?

  • Problem with opening PDF files in Google Chrome browser

    We have a web page displaying links to dynamically generated PDF files located on the internal repository. This files are not just text PDF files but PDF forms created using XFA technology. This means that they must be opened and filled only in Adobe Reader and not in Foxit Reader or browser's built-in PDF viewer.
    Now, the problem is that a Google Chrome browser opens any PDF file using its own PDF viewer. And I want to force this browser to open PDF files in Adobe Reader.
    How can I achieve this without disabling 'Chrome PDF Viewer' plugin since I can't do this for all users of our web site?
    Any help or advice would be greatly appreciated.
    P.S. We use LiveCycle ES3.

    Each user would have to set each browser individually.
    Note: I don't think it's possible to set the default PDF viewer with code for every user who visits the site.
    See the following link to enable Adobe Reader as the default PDF viewer in different browsers:
    http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html
    Note: Not all PDF viewer browser plug-ins support PDF submissions, and most 3rd party viewers may not support forms created with LiveCycle or forms with Extended Reader Rights enabled.

  • We are facing issue to open a static form PDF in Chrome Browser , which is loaded using Adobe FormService.Able to open in other browsers but not able to open the static forms in chrome with LC 11.0 version

    We are facing issue to open a static form PDF in Chrome Browser
    , which is loaded using Adobe FormService.
    Able to open in other browsers but not able to open the static
    forms in chrome with LC 11.0 version
    Below error message:
    The document you are trying to load
    requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
    or your viewing environment may not be properly configured to use Adobe Reader.
    For information on how to install Adobe Reader and configure your viewing
    environment please see http://www.adobe.com/go/pdf_forms_configure.
    Please let us know do we have any option for disabling
    <NoXFA/> tag by calling formService. RenderPDF() method on adobe service
    For dynamic forms its working by adding <NOXFA/> in
    DDX xml . only for static forms its not working because we are not using
    assembler service for this forms.
    Please let us know how we can disable XFA in static forms??????????????????

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • I am trying to watch videos online, but a message saying "You are currently browsing the web with Google Chrome..."

    I have a MacBook Pro, which I just bought in August.
    When I try to watch videos on my computer, a message pops up saying, "You are currently browsing the web with Google Chrome and your Video Player might be outdated." I know it's a pop up, but I don't know how to get rid of it and watch videos on my computer. I did look it up online and I downloaded the TSM Adware Removal Tool, which removed some adware files. Then I also downloaded Bitdefender Virus Scanner from the app store to scan my entire computer - nothing came up.
    Please help me solve this problem. Thanks.

    The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
    You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
    If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
    The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
    After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
    Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
    1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
    2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
    3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
    During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
    Check the router manufacturer's website for a firmware update.
    If you downloaded and installed what you thought was a software update, ask for instructions.

  • Firefox Version 36.0 Hanging with odd Script: chrome://browser/content/places/browserPlacesViews.js Errors / Lost all bookmarks including Sync.

    Hello - Yesterday 4 different PC's updated automatically to Firefox Version 36.0, they are all Windows 7 x64 Systems with the latest patches, one of them is a work / corporate PC running a slightly older version (34 I believe).
    Since the update all of my bookmarks have been lost and seems that sync got wiped out as well. I had a few thousand bookmarks all organized in folders and they are all gone. Whenever I click on the bookmark menu item firefox will hang and eventually give me the following error with different numbers at the end of the line (varies on each system as well as the same system). See attached for an example.
    Script: chrome://browser/content/places/browserPlacesViews.js
    Even if I start Firefox in Safemode I get the same results / behavior (the hanging) I can't even access the bookmarks menu to try and restore them from a backup. When I do that Firefox will hang and never come back, I have to go in to task manager and end the task.
    I've tried "Refreshing" at work I tried uninstalling / installing the newest as well as a version 35 version of firefox and have the same exact issue. I removed all of the plugins, I've even tried a full on reset of firefox and have had no luck whatsoever .
    It appears that I have lost about 10 years of various bookmarks but seem to have a somewhat up to date copy on one system with Chrome but Firefox won't even allow me to import the bookmarks as it will just hang.
    I have Malwarebytes running on 3 of the systems, it hasn't found anything, I also have Microsoft Security essentials running and did full scans of each system and haven't found anything, there isn't any kind of add on / plug in that I can see that is causing this
    Please help as I am now in a huge bind at work without all of my bookmarks!!!

    Ok this did not resolve the issue, I downloaded the Places Maintenance Add on and ran it with all of the options selected, I also verified that this is not a permissions issue and ran chkdsk on the disk.
    I am unable to make a backup of the bookmarks it just hangs and never makes the backup, I can't even export them either.
    I went to the next step and renamed the places.sqlite file and restarted firefox which did restore my bookmarks from a previous backup but I still can't click on the bookmark menu option without firefox locking up .
    How do I resolve this and how do I get my data back in to Sync?
    If this file is corrupted does that mean that all of my linked browsers downloaded the same corrupt file from Sync? How do I resolve that, is there anyway to recover my history from any of my other PCs?
    All that I did was when I was logged out of sync but want to know how I go about getting the info back in to Sync.

  • Strange issue with ADF table in chrome browser

    I have ADF table which should display 23 rows, but only 20 rows are visible in chrome browser, but other browsers like IE, firefox displays the 23 rows correctly. I have used default ADF table with Drag&drop behaviour in this table. All the 23 rows exported correctly to Excel with export to Excel behaviour and inspect page source also shows all the rows in Chrome browser, but display in the adf is only problem in chrome browser. We're having a production issue with this, any ideas are appreciated.
    Thanks,
    Surya

    Hi All,
    Is this issue fixed yet? There are a couple of threads reporting this issue and the original thread has been Archived. It is a real issue, and it remains an issue. The Chrome browser cuts off the last row of a table in the display. IE displays the row correctly. I am working with JDev 12.1.2 and I am building an application using ADF Tables. Without exception, on every page that has one, the last row of the table is cut off from display in a very ugly way and you cannot scroll down to display the full row. I have tried wrapping the table in a Panel Collection - same result, I have tried setting the height of the table - same result. I have tried surrounding the table with a PanelGroupLayout component (layout set to scroll) - same result. I have even tried surrounding the table with a PanelHeaderComponent component, Type set to both default and Stretch - yes, you guessed it, same result! I've even put the table in the middle of a PanelStretchLayout component - but the last row is always cut off.
    This should be easy for you to reproduce, just drop a data control on a ADF page and select a table. When you view it in the Chrome browser and you will see what I'm talking about. I'm using Google Chrome version 31.0.1650.63 m.
    I have experimented with AFStretchWidth and AutoHeightRows (as suggested by previous threads), nothing seems to work.
    Here's another suggestion, if the forum would allow you to insert an image, I could actually show you what I'm talking about. Food for thought perhaps?
    Best regards,
    Nigel
    "Life's too short not to use ADF"

  • Problems with Quicktime (Q?) in browser

    I am having a problem with Quicktime working in my browser (we use Firefox). Quicktime is up to date, but everything in the browser that should be running just comes up as a Q with a question mark in the middle. I have checked the browser settings and everything seems fine. Any ideas?
    whoops, just caught the other topic with the same problem....no answers there yet though...we did update our flashplayer and still no help.

    Go to QT settings>Browser>Mime settings>Miscellaneous-Miscellaneous file formats and uncheck Flash media.
    This has been going on for years and Apple computer refuses to correct the problem. It is beyond belief that Apple continues with this, but they can't market computers to the general public either. They send me e-mails to test their products and software that they want to test on a windows computer. I will consider doing it, but can't, with the Flash screw up going on...

  • ????????!!!! WHY CAN I GET THROUGH TOO YOU THROUGH MY GOOGLE CHROME BROWSER? ???AND POST HERE ??? WITH MOZILLA. YOU KNOW ME I'M. BLUEYEY!!! AND !!????? WHY

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1016493]''
    AND!!!!????? WHY? ??????? !!!! ??? WITH MY NEW DOWNLOADED. BETA BROWSER. I CANT EVEN GET IN TOO POST. WITH MY BETA BROWSER. BY YOU. !!! MOZILLA! ! WITH MY BETA BROWSER. YOU ONLY HAVE MY USERNAME?????? !!!!!! ????: :: BLUEYES. !!!! I WAS SOOOOOOOO HAPPY TOO USE THE BETABROWSER. I WANTED TOO POST. IT WITH MY BETA BROWSER BUTT MOZILLA ONLY HAD MY USERNAME :::: BLUEYES. !!!! MOZILLA. DIDNOT LET ME POST. WITH. MY YOU'RE BETA BROWSER? ???? ANSWER THAT ????WHY? ???
    MOZILLA SAYS MY E-MAIL WASN'T. ME ANDMY PASSWORD WAS WRONG??? AND WHEN THEY ASKED ME FOR MY EMAIL. ???MOZILLA ACTED ??AND TOLD ME THAT'S NOT MY EMAIL ???HELP HELP WHY IS YOU'RE. BROWSER. BETA DOUNG THIS ???DON'T. YOU???KNOW ITS ME??? I DONT NEED TOO 222222. 2. TWO. BROWSERS JUST ONE I CHOOSE YOU BECAUSE CHROME GOOGLE BROWSER. DOESN'T LET US GO NOWHERE. ON WEB. THEY , NEVER LET ME GET TOO YOU. IT TOOK ME MAYBE 8WEEK'S. TOO GET TOO YOU TILL ONE LATE NIGHT THEY KEEPT ME CUTTING ME OFF. !!!????!! AND NOW. I CAN ONLY POST. THROUGH. THIS CHROME GOOGLE BROWSER. WHY?????? AND. WHY????NOT THEOUGH YOU'RE. BETA BROWSER? ???

    please don't keep opening new threads about the same issue, but continue in your original question at https://support.mozilla.org/en-US/questions/1016493 !
    [[Forum rules and guidelines]]

  • I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browse

    I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, column 8702:....................."
    I did evrey thing, but the same problem
    reinstall SpeedBit, reinstall Mozilla Firefox.
    So what can I do!
    == This happened ==
    Every time Firefox opened
    == 4 days ago

    look people, i may have a solution for this. This happened to me a few times before and resolved alone, but last time it happened was when i turned off my router and back on while my comp was running and appeared when i tried opening firefox after that. so wat i did was i shutdown the computer and the router and tried turning both on again, and it resolved.
    Therefore, Summary: Shutdown computer then turnoff router then turn both back on
    Hope this helps anyone.

Maybe you are looking for

  • PO not appearing in SRM portal

    Dear all, One of the PO is not appearing in SRM portal.  This issue related to specific PO only.  Remaining POs of the vender are appearing in the portal.  All the XML messages are processed successfully.  we are using SUS senario.  Pl. help me in th

  • Computer was stolen--how to transfer from iPod to new computer

    My computer was stolen and I want to transfer my iPod library to my new computer. I know how to transfer from one computer to another using an iPod but is there a way to do it when I don't have the computer that has my iTunes library?

  • N70 ... Sorry but I give up !

    I'm afraid it is time to admit defeat on this one. I had my N70 2 months ago, and in that time I have experienced random resetting, call dropping, phone switching off mid-call and worst of all the awful creaking noise. I know the creaking should be t

  • Want to know about EP...

    Hi all, i m doing abap programming, i want to know about EP and SAp netweaver can u tell me Books name for the begginer so i can refere that or can any one give me PDF or link regarding both EP and Netweaver. Thanks & Regards, yunus

  • Merging of 8 programs into a single program

    Hi Abap gurus, Can any one pl help me out about merging 8 programs into a single one. Pl give me the best way to merge 8 programs into one program Thanks, Priya