Quicktime with no audio

when iam watching a video in quicktime how come there is no audio?

I also had this problem. I did a google search and found an old solution for this of opening the audio midi setup program in the utilities folder and I didn't have to change anything, I just tested my speakers. When I tried Quicktime on a HD trailer audio worked again. Try it.

Similar Messages

  • Export to Quicktime with multiple Audio Tracks?

    Hi all --
    I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
    Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
    However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
    Can anyone help?
    Thanks!

    Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

  • Exporting quicktime with 4 audio tracks for broadcast

    Hi,
    Does anyone know how to do this? i need to get a program out to a broadcast quicktime file with sync on 1&2 and M&E on 3&4, i have the sequence setup correctly as did a digi playout for the same thing which was fine. However, if i do 'export quicktime' with sequence settings i only get two audio chanels. If i go to quicktime conversion then all the drop down menus for multiple audio chanels are greyed out.
    Any ideas?
    Best,
    GK

    if i do 'export quicktime' with sequence settings i only get two audio chanels
    how are up you assessing this? QT Player has only 2 playback channels and additional channels will be mixed down to those ... but if you press Cmd-J to open the movie properties you should see all 4 channels are there, or if you reimport your exported file back into FCP you'll see it contain the 4 audio tracks as exported ... if not then your export settings are not correct :/

  • Can you export a Quicktime with multiple audio tracks?

    I have a video with split audio tracks.
    I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
    the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
    I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
    have they just not been integrated yet?

    Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

  • Exporting Quicktime with discreet audio tracks

    How in FCP do you export a quicktime file with more than two channels of audio that are discreet?

    Hi -
    For FCP 7:
    Click on your timeline.
    Type Command - 0 (Zero) and click on the Audio Outputs Tab.
    Change the number of outputs you want, and set the track pairs up as stereo or dual mono, as you want.
    Click OK, a warning dialog box will come up that you can dismiss.
    On the timeline, Option-Click on each audio track right below the auto-select toggle icon, and from the drop down menu, route the track to the desired output track.
    When done, export the Quicktime movie.
    The only way you will verify that all the tracks are there is to either open the exported quicktime in Quicktime pro and menu Window > Show Movie Properties. You'll see the additional tracks listed there -OR- just import the exported movie back into FCP and bring it up in the Viewer, you'll see all the audio tracks.
    Make sure you restore your sequence back to two channel ouput, if you want, when you are done.
    Hope this helps.

  • Export QuickTime file with new audio and maintain the file size and quality as the original.

    I shot some footage for a client yesterday and ran into an issue. To make a long story short I have QuickTime mov files shot with my Panasonic GH4 that have a buzzing sound in the audio track. I have clean audio from a recorder that can be sync'd. Is there a way for me to do this for the client and deliver them as the same QuickTime file but with the clean audio and keep the file size close to the original and not have quality loss in the image?
    If so I will probably put all of the spanned clips together from each interview and sync the audio before delivery. I am just not sure which codec will give the client the same quality footage compared to the originals and not have a massive difference in the overall file size. They did request that they be Quicktime MOV files though so that is a must.
    I don't see this as an option in the codecs in the export settings in PP, but is there a way to export as ProRes or another MAC native codec that will save them from having to convert it on their end? I am on a PC with Adobe CS5.5 so I am not too familiar with MACs, but from what I understand they would need to convert the files if I sent them straight out of the camera.
    I found some related search results for this but they pertained to "Best quality" for export. I am not sure how the varying options work but I don't want to create files that are considerably larger, just not less quality.
    If anyone has experience with this it would be greatly appreciated.
    Thanks,
    Cole

    Here's the workflow: I imported the video footage into iMovie '08 and did my edits. Then I exported it (share) to my desktop with compression set @ 740 X 480. Then I used QuickTime Pro to fix the audio track. The file plays perfectly with both audio tracks working. It's a QuickTime file (.mov).
    I hope this jars any replies as to why the file when uploaded to my iWeb gallery drops the second audio track.
    Hmm,
    Jack

  • QT H.264 files with two audio tracks. Quicktime plays 2nd track first. ***?

    I've been experimenting with H.264 (AVC) and my DVDs. Using Handbrake, I ripped a DVD to MP4 (H.264) and including the director's commentary as the second track.
    When I play the MP4 with Quicktime Player, it plays the director's commentary instead of the main soundtrack. VLC, however, correctly plays the first track (main movie audio track) and it allows me to select the second track via a menu.
    To get Quicktime to play the proper track, I have to open "Movie Properties" and manually uncheck the second track. This was never a problem with DivX/XviD encoded files with two audio tracks; Quicktime Player correctly played the first track.
    Why does Quicktime ignore the first audio track in MP4s (but not AVIs) and is there a way to correct this?

    I do have QT Pro.
    H.264 files are usually saved in a MP4 container. That's what Handbrake, ffpegX, and D-Vision create, anyway.
    The "Choose Language" option is greyed out (unavailable) when I open this H.264 MP4 in Quicktime. If I try to change the settings in "Movie Properties," it says that I must save it with the .MOV file suffix.
    It makes no sense to me that Quicktime Player can correctly identify the main audio soundtrack in a XviD file with an AVI container but not in a H.264 video with a MP4 container which Apple has been touting as the latest, greatest thing. Even VLC, an open source product still in beta, gets it right.

  • Export Quicktime with 4 channels of audio

    I'm running Premiere 5.5. and I cant seem to figure out how to export a Quicktime with 4 channels of audio(2 stereo pairs), any ideas?

    Here's a video about some of the new audio features:
    http://www.video2brain.com/en/lessons/changes-in-audio-tracks-and-merged-clip-audio

  • Quicktime movie with 3 audio tracks. Can't select audio track!

    I have a movie containing 3 audio tracks (3 different languages):
    Format: H.264, 720x304, 16,7 Mio
    AAC, Stereo (L R), 48.000 kHz
    AAC, Stereo (L R), 48.000 kHz
    AAC, Stereo (L R), 48.000 kHz
    When I play this movie with Apple Quicktime I hear a mix of all 3 languages at the same time. How can I select each audio track separately. With VLC player (freeware) it works fine.
    Is the selection of the audio tracks a feature of Quicktime Pro or is this a bug in Quicktime?!

    Hello lildog, hello QuickTimeKirk,
    Thank you for your answer. In the meantime I solved this problem. It is caused by the program ”MP4Box” which I used to create the video with the 3 audio tracks. Apple Quicktime and iTunes needs ”very special” header settings inside the mp4 container. A new version of MP4Box with special switches for this case solves the problem. For more details see this thread on the gpac/MP4Box project homepage: http://sourceforge.net/forum/forum.php?threadid=2345177&forumid=287547
    The VLC Player is much more docile with multiple audio tracks.

  • Just upgraded an iMac with 4GB Memory and Intel Processor from 10.6.8 to Mavericks and Quicktime plays m4v files with stuttering audio

    I just upgraded an iMac with 4GB Memory and 3.33 Ghz  Intel Core Duo Processor from 10.6.8 to Mavericks.  I now have Quicktime 10.3 which plays m4v files with stuttering audio.  This is a nightmare as I use Quicktime a lot in my research.  I have seen similar threads but so far only reporting the problem.  For now I have installed Quicktime Player 10.7 (which appears in utilities, leaving Quicktime 10.3 in the main applications list) which plays the same videos with no problem, but it would be good to know if anyone has managed to find a workaround at all, or know if Apple have plans to do anything about it?

    Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
    Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.

  • Trouble with 2nd audio track when exporting to Quicktime - please help!

    Ok - I've made my DV movie in IMovie - all ok. When I export to Quicktime the second audio track (an mp3 imported from iTune) jumps up in volume unexpectedly but always in the same place. There is no such jump in the original and I haven't put in any nodes to boost the volume etc.
    Any ideas guys??
    Thanks
    Les

    Hello,
    Further reading and search in this forum make me think I was right : it seems to be an iMovie 6 bug.
    http://discussions.apple.com/thread.jspa?messageID=2037970&#2037970
    I would suggest to have the maximum number of person reporting a feedback to Apple to get a quick fix
    http://www.apple.com/feedback/imovie.html
    Thanks
    Seb

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

    my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

    Hello Wade,
    This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Resolution
    QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    Cheers,
    Allen

  • Itunes won't run because of some problem with my audio configuration? help!

    it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!

    Perhaps this Apple KnowledgeBase article will help:
    iTunes 7 for Windows: iTunes had detected an audio configuration problem
    Good luck.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • Itunes cannot run because it detected a problem with your audio config.

    I keep coming up with this message. I feel like I have tried everything. Uninstalling---reinstalling---installing earlier versions---even tried apple's help page regarding this error. Nothing seems to work. Anyone have any ideas?

    I have exactly the same problem. Everytime I try to open itunes it shows the dialog "itunes has detected a problem with your audio config..." and then when it "opens"
    has no background, so it's impossible to do something. I've tried to reinstall itunes and quicktime in different ways like both of them separately and following every instruction in Apple's Web site like article #304424. I've installed prior versions for those programs too and the problem persist, tried to clean up the registry, etc. I don't want to reinstall Windows to solve this issue 'cause it seems to be only way to get rid of this! =( HELP!!!

Maybe you are looking for