Quicktime With Sound Echo

Forum,
Today I reinstalled my OS and FCS2. When I play Quicktime videos the video starts fine, until about three seconds later when the audio for the video starts again a second time creating an echo - truly annoying and not useful.
Does anybody know what might be going on?
Trey

possibly an incompatible version of Quicktime for your FCP OS combination

Similar Messages

Can KN3 export flash with sound?

I'm working on a presentation in KN2 and I need to export a .swf file with sound on each slide. I know I can export to Quicktime with sound, but I'm working with another company that only accepts a .swf files.
Is this fixed in KN3? Any suggestions on how to solve this in KN2?
Mac OS X (10.4.4)

ok, I just bought KN3. Opened my KN2 file that has narration on each slide. Saved it in KN3. Exported to Flash with sound.
However at the end I got a error box. "The following problems occurred while trying save document. Export Warning- A media file in slide 1 was not exported" This error occurred with all of my slides.
My audio files were recorded in Quicktime 7.0 Pro as "mov". Should the audio files be saved as a different format for Exporting to Flash?
Can "kworley" let me know the audio format that worked?

Sound echo in Quicktime 10.1

Hi,
I just received a video from a supplier. Here's the information:
Apple ProRes 422 (HQ), 1 920 x 1 080 (1 888 x 1 062)
Apple ProRes 422 (HQ), 1 920 x 1 080 (1 888 x 1 062)
Apple ProRes 422 (HQ), 1 920 x 1 080 (1 888 x 1 062)
Apple ProRes 422 (HQ), 1 920 x 1 080 (1 888 x 1 062)
PCM linéaire, 16 bit petit boutien entier signé, 1 canaux, 48000 Hz
PCM linéaire, 16 bit petit boutien entier signé, 1 canaux, 48000 Hz
The stereo sound is on two tracks.
The sound is playing with an echo in Quicktime 10.1 but is fine in NicePlayer. VLC lag with ProRes too much to test.
Anyone knows why Quicktime had this echo problem?
Thanks ofr help

I noticed I have the same problem too (sometimes) if a movie has two audio tracks. Quicktime acts as if its playing both stereo and surround at the same time.
If you go to the Quicktime Menu > View > Languages , then select one of the audio tracks, the echo will go away.

Problem with sound in games requiring quicktime

I recently purchased CSI 1. I installed the game and the latest version of quicktime player. As soon as the game starts and the first character starts talking the game pauses as if loading and then plays for a second and pauses again for a few seconds. This intermittent sound problem makes it impossible to play the game as the freezing stops everything from functioning. I tried another game that requires quicktime to be installed and that game is pausing the same. Has anyone else had this problem? I have all the latest drivers installed for Vista. Any help would be much appreciated.

Do you get any problems with sound in other (older) games? You didn't mention which drivers in particular you updated, but make sure the graphics card's ones are included.
With regards to Half Life 2, check out this page on the Steam site:
http://steampowered.custhelp.com/cgi...wYWdlPTE*&p_li=
If that page doesn't open correctly for you, just go to http://www.steampowered.com , then Support, and select Half Life 2 in the product list. It should be one of the first cases listed.
Cat

HT1926 I have qicktime and I have quicktime pro...but when i download certain videos they only download with sound and no pic...help

I have qicktime and I have quicktime pro...but when i download certain videos they only download with sound and no pic...help

What do you see instead of video, bobby? A green screen, pretty colors, something else?

Can you test webcam with the Echo / Sound Test Ser...

I wanted to see if my webcam's video is working with Skype, but I couldn't seem to use it when making a test call with the Echo / Sound Test Service. Do I have to make an actual call to test the webcam or is there another way? Thank you.

Hello there!
To test your video, please refer to the following instructions:
For a Windows PC
For a Mac
As asked on another thread previously, Skype does not offer a video calling test service.
I.T. Professional
Virtualisation Solutions (VCA-DCV - VMware)
Donating time to help you here with your Skype needs.
If I've answered your question, feel free to "Kudo" me!

How do I share a Keynote project as Quicktime with narration on each slide?

I have a Keynote presentation with narration embedded in each slide. It plays fine as a self-timed show. I tied everything together by "recording" the presentation (with no extra sound). This second version of the show plays fine within Keynote, starting always at the first slide. When I try to share this second show as a Quicktime, the sound is hit-or-miss: part of the narration on some slides, all of it on others, none at all on others. The total length of the QT movie matches the playing time of the Keynote presentation, but the sound is whacko. My workaround was to do a screen capture with iShowU, but I would like to know the solution to the problem within the Keynote program. I would appreciate hearing any ideas anyone may have. Thanks.

Oh !
thats a shame
is there no public or semi public area to save a file to that can be shared

Upgraded to Photoshop Elements 13 from Photoshop Elements 11 and mts videos no longer have sound. They play perfectly with sound in 11 but have no sound in 13.

I have upgraded to Photoshop Elements 13 running as a trial from Photoshop Elements 11 and mts videos no longer have sound. They still play perfectly with sound in 11 but have no sound in 13.
System Info on 13 is as follows:-
Elements Organizer 13.0.0.0
Core Version: 13.0 (20140831.m.62014)
Language Version: 13.0 (20140831.m.62014)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\Users\Master\Pictures\Adobe\PE13\My Catalog\
Catalog Size: 46.2MB
Catalog Cache Size: 657.4MB
System:
Operating System Name: Windows 8
Operating System Version: 6.3
System Architecture:
Built-in Memory: 15.9GB
Free Memory: 9.4GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: Not installed
Adobe Acrobat Version: Not installed
CD and DVD drives:
System Info on 11 is as follows:-
Elements Organizer 11.0.0.0
Core Version: 11.0 (20120923.r.32287)
Language Version: 11.0 (20120923.r.32287)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\Users\Master\Pictures\Adobe\PE11\My Catalog\
Catalog Size: 44.8MB
Catalog Cache Size: 550.5MB
System:
Operating System Name: Windows 8
Operating System Version: 6.2
System Architecture: Intel CPU Family:6 Model:12 Stepping:3 with MMX, SSE Integer, SSE FP
Built-in Memory: 15.9GB
Free Memory: 9.8GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.75
Adobe Reader Version: Not installed
Adobe Acrobat Version: Not installed
CD and DVD drives:

Hi John,
Sorry for the inconvenience caused. This issue has been fixed in Elements 13.1. Please try updating your application to free 13.1 update.
Let me know if you are still facing this issue.
Regards,
Anwesha

Will MPEG-2 convert a video with sound?

I've converted my videos to MPEG-4 using Quicktime Pro, and they play fine but with no sound.
Is this the application I need to convert them with sound?
http://www.apple.com/quicktime/mpeg2/

I've converted my videos to MPEG-4 using Quicktime Pro, and they play fine but with no sound. Is this the application I need to convert them with sound? http://www.apple.com/quicktime/mpeg2/
No. As Kay tried to explain, the MPEG2 component will simply allow you to extract the video data from a "muxed" stream of audio/video information. To extract and convert both audio and video data, use an MPEG based third party application like MPEG Streamclip (free). This application uses MPEG routines to decocde "muxed files (e.g., MPEG1, MPEG2, VOB, etc.) and then uses your QT Tools package to convert them to an iPod specific (or other QT compatible) format. (NOTE: Windows version of MPEG Streamclip does require the Apple MPEG2 component you asked about.)

Recording streaming videos with sound

Can I use quicktime for recording streaming videos with sound? If not which Apple software can do it?
Bye Christof

You can use Quicktime to record streaming video +with it's audio+ by using a very simple trick. Using the same cable you connect your iPod/iPhone to your car's stereo system, connect your Mac's Audio OUT to its MIKE IN jack. I used FILE / OPEN URL to select the video stream source, then selected FILE / NEW SCREEN RECORDING. In the resulting 'Screen Recording' dialog box, I set the AUDIO slider all the way to the right, and under the arrow to the right, selected "Built-in Input Line In" for the microphone. I then used the appropriate controls to play the stream and record it. The resultant file was very acceptable. Good luck.

.mpg with sound in Iphoto, no sound in Imovie

Hello Everyone,
Can someone tell me why when I play a small .mpg movie in Iphoto it will play with sound but will not when I import it into Imovie?
Many thanks,
Jim

I guess I must be doing something wrong, being a newbie, I probably am. I downloaded and installed Perian and set it up in system preferences, then loaded a snippeet .mpg file into Quicktime,(I have just the player version not pro) and it played fine. I then imported the same clip into Imovie and will only play with video but still no sound.
Any ideas on what I might be doing wrong?
Thanks,
Jim

Export Quicktime with Audio - timings to advance slides -does not work

Mac OS 10.6.1
iMac 27" 4 GB 1067 MHZ
Keynote 09 - 5.03
I opened a .ppt
I added an windows media file after getting it into GarageBand - so a GarageBand file actually
I timed the slides - this does not work either as a side remark - you can not just enter seconds there - they disappear - you need to use the arrows
If I test the slideshow, it runs nice in Keynote.
If I export it to Quicktime, the sound works, the slides do not advance.
(I think I had it once working before I moved my files to my new Mac)
Help please
nico

I'm just posting this as a general discovery....
I too have had many many frustrations with creating a slide show with audio clips linked to individual slides and a soundtrack music background. Of course this records fine and plays back fine in KN. The problem lies in any form of sharing/exporting. The audio either disappears or the timing goes nutty.
What I discovered was....During a manual recording in which I advance the slides and the builds within the slides, the tap of the space bar directly correlates to when the audio would stop in the exported version. ie. Slide one, audio set to start automatically after transistion, text has no builds, Slide 2, audio set to start automatically, text builds with each bullet. In the exported version the second I hit the space bar to create the first build during the recording, is where the audio is cut off in the exported version.
Therefore, if I go through each and every slide and set the timing for each and every build, transition, etc. , then record the slideshow so that I never have to hit the space bar to create builds (transitions to next slide seems to be fine) my exported recording seems to play back without problems. This is very tedious but seems to work (so far).
I hope I have explained my findings clearly. I also hope that this is somewhat helpful to the rest of the world

Photo Booth with sound?

I have been searching for a way to send an email including a picture and music. I found just the application I needed, but it was for use with Windows. Anyway, the answer might be right under my nose. Some of the articles I saw on the Internet mentioned Photo Booth with sound. That would be great. Photo Booth is as simple to use as can be. The only problem is, I don't see how to add sound. Could it be that there is more than one Photo Booth? Anyway, my question is, is there a way to use Photo Booth to send an e-mail including picture and music?

Hello Niku
Yes, you can add sound, but not by using PB (or Leopard's PB2.)
If you have your music playing while you record a PB2 video, the sound can be recorded WHILE you are capturing video, but there is no way in in PB or PB2 to add sound to existing video or still images (that you have already made.)
I do not know any app that adds sound to still images. (You can make HTML simulations by imbedding both a still image and a sound file in an HTML page, but that is not really adding sound to the picture.)
You can convert any snapshot, whether made with PB2, the original Photo Booth, iChat, or any other app that can make a snapshot by importing it into iMovie or QuickTime Pro and adding the sound track in one of those apps. Then save the file as a QT movie.
Even if you do not make the image move, the file will still be a QT movie file, and QT movies can contain sounds.
You could also use the same procedure with iMovie or QT Pro to add to or change the existing sound on a movie clip that has already been saved, whether recorded by PB2 (the original PB did not record video), WebcamTweaker, or any other app that can record movie or video clips.
So go buy Leopard, and enjoy. However, you will not be able to add sound to either the still or movie files you make using Photo Booth 2 except by using some other application.
If you would rather, you can certainly use iMovie and Tiger to do what you want without buying Leopard or any other software, but you will miss out on all the other new, fun features in Leopard.
Did that give you what you need?
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

Flash videos playing with audio echo on initial load.

I have been having issues playing Flash videos in the current version of Firefox (10.0) as well as the previous version (unknown) over the past few months.
When I open a page with a video it will begin playing with an echo as if two videos are playing at the same time with a slight delay on the second video causing an audio echo effect. So basically one video with echoing audio. The websites that I experience this the most are yahoo sports (happens practically every time) and gamespot (happens occasionally). If I refresh the page the echoing effect goes away.
I am running Windows 7 64-bit.
I have updated video drivers on my ATI Radeon HD 5800 series.
My flash player / shockwave is 11,1,102,55 (updated) but I know I have experienced the same problem with previous versions.
I have the following plug-ins enabled:
1. Adobe Acrobat 10.1.2.45
2. Current version of Ad-Block
3. Divx Plus Web Player 2.2.0.52
4. Divx VOD Helper Plug-In 1.1.0.6
5. Microsoft Windows Media Player Firefox Plug-In 1.0.0.8
6. Quicktime Plug-In 7.7.1 / 7.7.1.0
7. Real Player 32 Bit Plug-Ins (4 total plug ins) 15.0.0.198
8. Veetle Plug-Ins (3 total plug ins) 0.9.17.0
I have some others as well but I thought these were the only relevant ones.
Can anyone help me with my problem?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Emailing with sound from Centro camcorder?

Has anyone sent videos via email, with sound from your Centro camcorder?
I was so bummed, sent several videos with several friends, to a friend for her Birthday and when she received them there was no sound or option for?
I'm hoping I just missed something? Thanks
Post relates to: Centro (AT&T)

Hello!
You could send out vids via email but those you send it too need to use the Quicktime player to play them since they are in 3GP or 3GPP format. They can get the play via http://www.apple.com/quicktime/download/

Quicktime With Sound Echo

Similar Messages

Maybe you are looking for