Quicktime won't load - along with another program

Fairly new computer, programs already on machine work fine and load with no problem. I installed ULead VS 10+, installed no prob, but won't load. Switched to Adobe Premiere Elements 3.0, install fine, won't load. Downloaded the latest Quicktime, installed fine, won't load. Had my firewall/AV off when installing and trying to load. The weird thing is, I installed Abdobe Photoshop Elements 5.0 and it worked fine. Also installed Window Washer and it works fine. Trying to figure out if something on my machine is not allowing certain programs to load b/c of a Quicktime file?

Think I might've discovered part of the problem. I'm seeing a Quicktime for Windows (32 bit) under my Add/Remove Progams. Can't remove it there, tells me it can't find a current version of QT, if I have an older version I can use the QT installer to remove it. Tried using the windows uninstall through All Programs, but get same error message. Tried using Add/Remove to get rid of my current 7.1.3 version, but it comes up with a fatal error message. How can I remove the QT 32 bit and the QT 7.1.3? I think if I could get rid of all that and reinstall 7.1.3, that might solve my prob.
Dell Windows XP

Similar Messages

QuickTime won't load on iPad?

QuickTime won't load on my iPad? Just spins.

Hey Kathy029,
Thanks for the question. After reviewing your post, it sounds like your are having difficulty with one program. I would recommend that you read these articles, they may be able to help you resolve or isolate the issue. I'd start by closing all the open apps and restarting the iPhone. If it is still not resolved after restarting you may need to restores the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Have a nice day,
Mario

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

The hotkey for Private Browsing ( CTRL Shift P ) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?

Question:
The hotkey for Private Browsing (<CTRL><Shift> <P>) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?

You can try this extension:
*Customizable Shortcuts: https://addons.mozilla.org/firefox/addon/customizable-shortcuts/

Is there a way to get the calculator from the dashboard to appear along with other programs? Can anyone recommend a calculator which will work as a stand alone app?

AS it stands now, in order to use the calculator that comes with the Dashboard, you cannot read from a list of numbers in, lets say, word or excel. The dashboard is full screen and nothing can stand along side it. Is there a way to get the calculator from the dashboard to appear along with other programs? Can anyone recommend a calculator which will work as a stand alone app?

there is one, just search with spotlight "Calculator".
It works great!
Hope this helps.

Cannot instal xorg files - Conflict with another program.

I have a new install and set up my wireless, got pacman working good but there are a couple things that are not working. 1-cannot install powerpill, it just does not find it when i try to download it. 2 when I try to download xorg files it says there is a conflict with another program (not near my comp right now so i dont have the name of the program, i will post it later). I am more worried about getting xorg set up than powerpill. does anyone have any ideas? i am set up for fastest mirror and ran the pacman -Syu to update everything yesterday...

I am trying to install everything under xorg that comes up when you type pacman -S xorg. the error itself says that it conflicts with another program when i try to download it. it says do i want to remove program "x" but does both options still will not download. I will get the full info tonight.

Buning itunes music with another program?

Is there anyway I can burn itunes downloaded music with another program since itunes want let me burn cd's

THIS IS A BOARD OF PEOPLE WHO RANT ABOUT APPLE'S SHOTTY PRODUCTS!
That's not the purpose at all, but if you really think that's why you are here, you will likely continue to have trouble finding help.
If you really want to get help, you would do as several people have suggested, and post your iTunes version, iPod version, exact steps you have taken, and the results of each step. That's what will allow people to give meaningful help.

After running Malwarebytes & it removing/quarantine threats, Firefox works & loads slow along with other programs. Videos are now really slow also.

I downloaded Malwarebytes to run a scan of my system. After it had detected some threats, It removed/quarantined all the threats it had found. I use Firefox & have been happy with it & have the latest version - 25.0.. I have since uninstalled it but my system loads very slow & all programs are affected including videos, etc.. The system was fine before this was done.

I have/had this exact problem -I just restored everything that Malwarebites "quarantined" (an option within the program), and it honestly seems better already. My wireless network connection was even restored and is working well again (after running Malwarebites the connection wouldn't automatically connect after sleeping as it did before).
My guess is, Malwarebites isn't so good at differentiating good from bad.
I've only been running the PC for about 20 minutes since restoring everything, but I've noticed improvements in everything (especially boot up). I'll update this if my results change, but as of now it seems to have fixed the problem.
*update -after restoring the quarantined items and removing the program from my PC everything seems to be running at it's original speed. Firefox, Photoshop, and Dreamweaver are all opening and running at near instant speeds (as they originally did).

Is there a way to import my STD quality video without converting it with another program?

I understand how to import the HD quality video through imovie, but cannot seem to import the STD quality video without first converting it through another program? Anyone know how to do it without the cumbersome converting process? Thanks.

What kind of camcorder did you use to shoot the video?
If you aren't sure, will the STD quality video play in QuickTime Player? If so, click Command-I to open the Inspector and tell us everything listed by the word FORMAT: as well as the dimensions of the clip. (Instead of Command-I you could alternatively click WINDOW/INSPECTOR.)

Safari & Firefox: Won't load pages with images

Everything was working fine one night, and then the next, I couldn't load any pages with graphics. The one caveat: Google loads without a problem, even a Google image search. Every other site, including Apple.com, either won't load at all, or will begin to load until it encounters and image, and then hangs. Thoughts?
I've seen similar posts, but none of them really apply, and the only one that did, didn't have an answer.

Every other site, including Apple.com, either won't load at all, or will begin to load until it encounters and image, and then hangs.
You're saying that, in addition to images not loading, pages are loading slowly or not at all, as well?
If this is the case, then the problem isn't isolated to images. It sounds more like a problem accessing web pages altogether.
As a troubleshooting measure, try setting fixed DNS addresses, either in your router's configuration or in System Preferences -> Network. For the latter, click on the network connection that you use, e.g. "Airport" or "Ethernet," then click on the Configure button. Click on the TCP/IP tab and enter a pair of fixed DNS addresses in the section with that label, as follows:
208.67.222.222
208.67.220.220
You can copy and paste those directly from this forum into that DNS address field.
(Those are OpenDNS addresses, available for use by anyone. DNS addresses are the addresses of servers that tell your web browser where to look when you type a web page address in your web browser.)
If that doesn't work, the problem lies somewhere else. But your symptoms (slow or no page loads; and even when pages load, images not loading) sound a lot like the DNS problems I had before I started using alternate DNS addresses.

Can you retrieve BB Protect data with another program?

Can you download your Blackberry Protect date (ie. Address book) to another program? I want to get my contact info but I no longer have a cell phone.

Hi Thomas,
Thanks for the info. Based on my experiments, that's the conclusion I had come to as well, but it's good to get confirmation.
My work around is to break every TX transaction into small pieces. The NI 8452 supports streaming sample sizes of up to 64 bits (8 bytes). I can make a transaction that is one sample long with "samples" of 4, 6, or 8 bytes, as needed. Continuing my original example, I can do this:
NumBytes = 8;
ni845xSpiStreamConfigurationSetNumBits(StreamHandle, 8 * NumBytes);
ni845xSpiStreamConfigurationSetNumSamples(StreamHandle, 1);
ni845xSpiStreamConfigurationWave1SetMosiData(StreamHandle, WriteData, NumBytes);
ni845xSpiStreamStart(DeviceHandle, StreamHandle);
And I see this transmitted:
0x0102030405060708
You can repeat the SetMosiData and StreamStart steps for each additional block of TX bytes.
I would like to use the ni845xSpiWriteRead() function (that would be much easier), but that doesn't work with the broken pre-production SPI slave I need to talk to. (We will fix it, but I need to work around the problems for today). I need to generate a very small delay at the end of the transaction between when the serial clock stops and when CS deasserts, or else my transaction is ignored. I measured the delay between SPC deassertion and CS deassertion produced by ni845xSpiWriteRead() at 1.19 us. In order to talk to my broken SPI slave, I need a much shorter delay, on the order of one SPI clock period.
So yes, I hope to upgrade to the basic SpiWriteRead function in the future, but I can't use it today.
Thanks for your help.
-jskroch

How Find LR Edited Image With Another Program?

I upload RAW images from a Canon Camera with Canon DPP then import them to Lightroom 1.2.
I edit the images in LR.
Then I want to edit the image further with GIMP. When I open the file, I get the original RAW image. How can I get the LR edited image?

Lightroom's edits are parametric, i.e. it saves its edits as metadata in a sedecar .xmp along with the RAW. The original RAW always remains untoched - that's why you see it unedited in Gimp. No other program, except Adobe's Camera RAW, understands these edits.
To edit in Gimp you need to create a prerendered TIFF or PSD copy of your RAW and open it there.
The easiest way is to configure Lightroom to have Gimp as an external editor. Then select your raw image in LR, choose Edit in Gimp. Lightroom creates a copy of your raw and opens it in Gimp.

When Firefox in minimized and I'm working with another program, why does it automatically maximize (pop up) every 10 minutes?

I'm using Windows 7 and Firefox 8.0.1 on a PC. This is frustrating. I like Firefox, but it keeps popping up every 10 minutes when it's minimized and I'm working in another program. I can't continue to use it if this can't be fixed. I just switched from 3.6 and never had any problems. Also, no settings have been changed.

Great suggestion! It looks like one problem has been solved. I started Firefox in safe mode and the problem didn't occur. Then I restarted in regular mode and individually disabled one add-on at a time. What I found is that with Better Privacy disabled, the pop-up no longer occurred. So step one, identifying the source of the problem, is complete. Now onto step two, finding out what setting in Better Privacy is causing the problem. There's nothing that stands out to me as the culprit. Any ideas? Thanks again!

Quicktime won't load certian videos

I have noticed that sometimes quicktime will not load videos from certian links. Mostly these are the exclusive movie clips or trailers on web sites like the new Harry Potter HD trailer on Yahoo Movies. The video box will come up on my computer but there will never be any movie or dialogue load. Has anyone else had this problem.

Update on previous post:
SOLUTION was a reinstall of both IE7 and QT 7.1.6, which cured problem.
HOWEVER I noticed the other day that the problem was back and the qtlHD[1].qtl box reappeared each time I clicked in Yahoo movies (seemed OK on QT site for some reason tho). Only thing I had done was to update DivX codec to 6.6.1. Thinking this was causing the problem, as soon as I unticked "Support decoding of Generic MPEG-4 video" box on Decoder tab of Configuration Utility (for DivX) then QT worked like a dream.
Hope this helps others.

Hi I have accidently wiped recovery part of my hard drive and computer won't load up with the disk either any ideas to create disk utility

Hi I've accidently wiped iso x off my computer and recovery and my disk won't load either any idea how to get disk utility on a disk

Care to share which OS you are using? iOS is for mobile devices.
Were you trying to use a system disc? The one that originally came w/the comp?
Which model iMac are you using?
==============
Your system profile is a complete blank.
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

Quicktime won't load - along with another program

Similar Messages

Maybe you are looking for