Quicktime wont install..help!

My itunes wont work and seen in other threads that this is due to my quicktime not been installed properly. I have tried uninstalling current versions, reinstalling seperately and as with itunes and every way possible but the exe. install file just crashed halfway through and throws up a questionmark balloon? I dont think that the previous versions have uninstalled properly as there are still files showing if I do a file search but its not showing on the install/unistall control panel - please help - I just dont know what to do??

good gracious ... from your other post, i'm assuming that you had one of those strange ones where there were permissions for some accounts missing on the QuickTime keys? (i've seen that also associated with HKey errors on the installs.)
at any rate, i'm glad you're up and running again.

Similar Messages

  • My itunes wont pick up my phone so trying to install again but now wont install  help!!!!!!!!!, my itunes wont pick up my phone so trying to install again but now wont install  help!!!!!!!!!

    my itunes wont pick up my phone so trying to install again but now wont install  help!!!!!!!!!, my itunes wont pick up my phone so trying to install again but now wont install  help!!!!!!!!!

    Hello leeminor,
    If your iPhone is not seen in iTunes, please check out this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    If you have already started reinstalling iTunes, may also want to check out this article for the recommended steps to remove and install iTunes correctly.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Thank you for using Apple Support Communities.
    Nubz

  • Itunes 7 and quicktime wont install

    Neither itunes 7 or the latest quicktime will install since I recovered my system and installed all the latest windows updates. I get the ol' "installer incountered errors before itunes could be configured, try again at a later time." popup.
    I tried EVERYTHING on the available list of things to try that I found on the message board. please help!

    Well, I after reading for about an hour, I ran windows intstall cleanup utility and standalone installed quicktime, and now my itunes works! Thanks for the support!

  • Help!!! hkey_local_machine...?????? Quicktime wont install no matter what!

    okay so every time i try to install itunes and quicktime, this little thing pops up that says
    "could not open key: hkeylocalmachine\...\QuickTimeUpdater.exe. Verify that you have sufficient access to that key, or contact your support personell."
    what the heck does that mean?!?!?!
    i am a conmputer admin. so i know its not that... i cant for the life of me figure it out and my ipod is useless until i do! please help!!
    intel   Windows XP  

    good gracious ... from your other post, i'm assuming that you had one of those strange ones where there were permissions for some accounts missing on the QuickTime keys? (i've seen that also associated with HKey errors on the installs.)
    at any rate, i'm glad you're up and running again.

  • TS3772 quicktime wont install or uninsrall it says it is on a network resource that is unavailable what do i do help!

    i am really getting annoyed that i cant watch breaking bad so i need help with quicktime or maybe somewhere else i could watch it

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up").
    In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

  • Itunes and Quicktime wont install

    When I tried to update my iTunes and Quicktime recently, it succesfully downloaded, began installing, and once the progress hit Quicktime, and error showed "an older version of quicktime cannot be removed." Now the issue is, that before this happened, the update had already removed the older version of iTunes. However, it was unable to install the newest version due to this quicktime issue. So here I sit. Help?
    -D

    once the progress hit Quicktime, and error showed "an older version of quicktime cannot be removed."
    Most probably that's an issue with the installation database in the QuickTime.msi file.
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we need to hunt down a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for *at least version 3.0* of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes 9.2 again. Does the install go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • QUICKTIME WONT INSTALL WHEN I UPGRADE IN ITUNES

    Ive tried to upgrade my itunes, itunes installed but quicktime didn't...it says it has an installation error -3
    please i need this problem figured out quick cause my itunes wont work.........
      Windows XP  

    hi Be!
    reboot your computer. open your task manager to the processes tab. now try to launch itunes again.
    b if you see an itunes.exe appear there, and persist in your task manager, try
    Lorraine M, "NIS/i-tunes problem rectified" #2, 12:51am Oct 17, 2005 CDT
    ... or, if you
    b don't
    have Norton Internet Security 2005, try:
    http://docs.info.apple.com/article.html?artnum=302386
    b if itunes.exe appears and then disappears:
    ... then there's a good chance that you've got a malware infection on your PC. post back, and we'll work out how to proceed.
    love, b

  • Quicktime wont install or uninstall

    i just finished reformatting my computer and was downloading stuff i needed. i downloaded quicktime from the apple website, but when i tried to watch .mov files i couldnt. i went to add/remove programs and was going to unistall from there but it is not listed. in my programs on my start menu quicktime and itunes are both there. when i click unistall from the start menu on quicktime nothing happens. i have tried deleting the files in the c: drive as well but it says quicktime is being used by another program i have also tried deleting the files using regedit. nothing will uninstall it. itunes doenst work either FYI.

    Perhaps this will help:
    Bugie: Perform a Thorough & Complete Uninstall and Reinstall of iTunes/QuickTime
    Good luck.

  • Quicktime wont install

    We purchased two Nano Ipods for Xmas, my older son has an older classic Ipod for which we have an older version of Itunes.
    We have tried to down load the new version of Itunes but keeps coming up with an error with Quicktime. The error message is something like 2250. We have deleted and retried, we have tried to download Quicktime by itself but then it just says unable to install dur to error try later.
    We are getting frustrated.
    Any ideas?

    Go here -> http://support.microsoft.com/kb/290301
    download and run the MS Installer cleanup utility to clean up QT, then reinstall QT.
    Download the QT installer here -> http://www.apple.com/support/downloads/quicktime715forwindows.html

  • ITunes 7.0.2. wont install because Quicktime wont install

    I've been trying to install iTunes 7.0.2 on my computer for WEEKS but the installation always encountered a problem: the programme always stopped just as it was computing Sapce requirements for Quicktime. An error message saying "Invalid drive: U:/" appeared and then "Cannot install QuickTime. ITunes requires Quicktime" or something like that. And then the installation aborted. There isnt a drive U: on my computer and I didn't understand why this was occuring.
    My brother had been suffering from a similar problem, whereby installation always failed under the same circumstances only asking for a (valid) network path on another computer of his (it asked for //Computer/My Documents instead of U:) He managed to solve the error by connecting to the network path and re-running the installer.
    The solution to my problem was much the same. I got a USB flashdrive, plugged it in an using the Disk Manager
    (Start>Settings>Control Panel>Administrative Tools>Computer Management>Disk Manager Right click on the USB disk and select Change Drive letter) created a disk U:
    Problem solved.

    I'm trying to figure out if this was a problem with my computer or something to do with the iTunes 7.0.2 installer.
    My computer met all the system requirements (256RAM, 500MHz processor - I actually installed extra RAM to see if it would solve the problem!) when the problem was occuring. Has anyone else encountered a similar problem?

  • Flash and reader wont install help please

    Hi , never posted  on a forum so be gentle
    neither flash or reader x will install , it gets to 50 percent then gives a generic fail message ( flash encounterd problems andthen  just stops)
    im using an old
    p4 2.4
    gigabyte 8ipe100 mobo
    ac 97 sound
    ati radeon 9800 pro
    windows xp pro 32 bit
    the latest firefox browser
    was trying to install the latest flash player from the main adobe website
    any help or ideas would be greatly appreciated, thanxs in advance

    For Adobe Reader, use the installer from http://get.adobe.com/reader/enterprise/
    If that does not resolve your problem, please post in the Adobe Reader forum.

  • Quicktime Player install HELP

    I get a popup saying unable to uinstall older version when trying to install latest Quicktime player. Please Help

    Refer to the post by b noir in this link
    http://discussions.apple.com/thread.jspa?threadID=899914&tstart=0
    If this does not work for you, I would say that it it permissions related. Which I go on about at the bottom of the string of post's in QuickTime Installation by author SheriMc on this page.

  • .Apps files wont install (HELP)

    Hi, I download a few apps from the net, go to download folder try to install the app but it performs a flash then dose notting. It happening to all the .app files i download and try to install. Any suggestions please let me know
    Thanks You
    PS my console message says -
    4/02/2014 9:43:00.580 pm Finder[261]: 8837325: Attempting to SIGCONT to pid #2100 failed, with errno=#3, or the process failed to actually start

    If it is a .(DOT)APP file you don't need to install it. It is a Stand Alone Application. Just double click on it and it should run, launch, open.
    If these .APP files are for iOS (That is the operating system that run on Apple "i" Devices, phone, pad and pod) then they won't work on Mac computers running OS X. Two Totally different Operating Systems.
    You'll need to be more specific on what these APPs are.

  • Creative cloud wont install - help

    I have an old pc working well with windows 7 prof and cannot get the exe file for CC to install the app.  It starts and then ends with no messages.
    Jack DeMember

    I am interested in what is going on, not what it could be.  The processor is AMD Athlon XP 2600 2.17GHz.  It is working fine with a solid state drive and windows 7 prof.  If it rejects this processor then there ought to be some message somewhere. There is nothing.

  • New Laptop , I Tunes wont install

    Downloaded intunes and it wont install because quicktime wont install
    HELP plz ?     

    Yeah, you're pointing in the wrong direction when you blame the issue on your iPod. Reference the KB article mentioned above, http://docs.info.apple.com/article.html?artnum=302335 and then check your windows user settings in the Windows Control Panel and then ensure that you are an Administrator of the computer. If not, login as one and uninstall/reinstall.
    If that fails, check to ensure that the Windows Management Instrumentation (WMI) service is running by typing "services.msc" (without quotes) in the Run menu (Start/Run/services.msc).
    Lastly, try running the iTunes installer file after you have disconnected from the internet (physically un-plug the network cable from your computer if you're on DSL/Cable/LAN) then disabled your anti-virus software.
    If these steps work for you, please let us know here on the forums. If not, we'll still try, but remember, this is an Apple forum, so to expect a lot of Windows answers may be like going to your barber for advice about your overbite.
    Hope this helps.

Maybe you are looking for

  • Transformation issue - Message no: RSTRAN517

    Hello experts, When trying to activate the Transformation for an InfoCube, I get the error message: Rule (target field: ZD_REV1): No source unit assigned Message no. RSTRAN517 Looking forward to your assistance in resolving this. Thank you!

  • Firmware upgrade 1.3.0.62 -- 1.3.5.58 (SG 300-28P)

    Should i be concerned doing the firmware upgrade remotely? I.e. remote to a local workstation and connecting to SG 300-28P from that workstation over LAN and doing firmware upgrade using WebGUI (Google Chrome)? I've done the multiple upgrades on thes

  • How to read Archive data??

    Hi, I am developing a program which requires me to retrive the <b>archive</b> data of table BSAK and then fill it into an itam then output the list. I use T-code 'SARA' to find the object name is 'FI_DOCUMNT'. There u can find that BSAK is contained

  • How can i have bookmarks automatically in a new tab rather than the tab i am in when i select a bookmark?

    How can I get book marks to automatically open in a new tab rather than the tab I am in when I select the bookmark?

  • Deploying JSP Application in OC4J

    Hi Experts, Here is my query. I have developed a small application containing around 40-50 JSPs. Its developed using Only JSPs & nothing else. I use external JARs like *"jakarta-poi-1.5.0-FINAL-20020506.jar", "fileupload.jar"*. This application was t