QuickVPN and Windows 8

I had been using QuickVPN from home to connect to an RVS4000 at my office. I recetnly updgraded to a RV180W.
I can connect a Windows 7 Pro PC on my home network to the RV180W with QuickVPN.
But I cannot conncect with a Windos 8 laptop. I have tried all of the compatibility options to no avail - it times out "Verifying Network."
When will Cisco release a Windows 8 version of QuickVPN? Seems silly to not have done so already as it is getting difficult to buy a laptop or PC that does not have Windows 8 loaded. I have searched the Cisco site and there is no information.
I need to know very quickly as I amy need to return the RV180W and look for another solution that works with Windows 8.

Hi Norm.
I´ve created a document with some tips about VPN, you could see it here:
https://supportforums.cisco.com/docs/DOC-29399
If this doesn´t resolve your problem and you need a quick answer, can you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
“Please rate useful posts so other users can benefit from it”
Greetings, 
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Similar Messages

  • QuickVPN and Windows 7

    I know that this is a very common problem but by starting a new thread and rattling the cages, maybe someone at Cisco may take notice
    QuickVPN does not work with Windows 7 - FIX IT
    I have used QuickVPN 1.4.0.5 running on XP and Windows 7 on the same box and XP always works, Windows never does
    I have used QuickVPN 1.4.0.5 running in an XP virtual machine and a Windows 7 Virtual machine and XP always works, Windows 7 never does.
    I have read all the messages on this forum and none of them helped.
    Clearly there is nothing wrong with my router(s) or ISP blocking ports etc etc since XP ALWAYS WORKS !!!!
    I have to keep an XP virtual machine around just to run QuickVPN - I guess I should count myself as lucky.
    At least I can get some work done!

    First of all sorry for my English.
    I had the same issue and finally solved it by installing the CISCO.VPN.Client.v5.0.04.0300 (the one which is used for routers like Cisco 877) additionally into my computer (QuickVpn and CiscoVPNClient).
    I found this solution by "accident", because I had a Laptop with Windows 7 in my home, where Quicvpn was working perfect from the beginning.
    Then I thought that the only deference was that I had installed first the CISCO.VPN.Client to establish a vpn connection to a different place. So I tried this procedure to a new laptop and it worked also.
    Hope helping you for solving this headache to...

  • QuickVPN 1.2.8 and Windows Vista

    Hi, I have managed to install QuickVPN on Windows Vista, but It won´t connect to my WRV200 router. I have have enabled that the if the router is pinged it will reply but QuickVPN does not get connected. I have also studied the readme file and it says that the Windows Firewall needs to be enabled. I have disabled my ZoneAlarm 7.1 just in case, but it keeps on the "Verifying Network" messagebox but don´t get connected.
    Does somebody knows how to solve this issue?
    Thanks and Regards,
    Julix

    Just pasting the logs:
    2008/02/13 19:35:52 [STATUS]OS Version: Windows Vista
    2008/02/13 19:35:52 [STATUS]Windows Firewall Domain Profile Settings: ON
    2008/02/13 19:35:52 [STATUS]Windows Firewall Private Profile Settings: ON
    2008/02/13 19:35:52 [STATUS]Windows Firewall Private Profile Settings: ON
    2008/02/13 19:35:52 [STATUS]One network interface detected with IP address 196.162.2.102
    2008/02/13 19:35:52 [STATUS]Connecting...
    2008/02/13 19:35:52 [STATUS]trying to connect to remote gateway with IP address: 24.232.100.58
    2008/02/13 19:35:56 [STATUS]remote gateway was reached...
    2008/02/13 19:35:56 [STATUS]Provisioning...
    2008/02/13 19:36:07 [STATUS]Success to connect!
    2008/02/13 19:36:07 [STATUS]Verifying Network...
    2008/02/13 19:36:12 [WARRING]Fail to ping the remote VPN Router!
    2008/02/13 19:36:14 [WARRING]Fail to ping the remote VPN Router!
    2008/02/13 19:36:17 [WARRING]Fail to ping the remote VPN Router!
    2008/02/13 19:36:20 [WARRING]Fail to ping the remote VPN Router!
    2008/02/13 19:36:22 [WARRING]Fail to ping the remote VPN Router!
    2008/02/13 19:36:25 [WARRING]Fail to ping the remote VPN Router!
    2008/02/13 19:36:27 [WARRING]Fail to ping the remote VPN Router!
    2008/02/13 19:36:30 [WARRING]Fail to ping the remote VPN Router!
    This is odd as if I ping my router with the common 'ping' command through CMD I get a successful reply. Any suggestions?
    Thanks,
    Julix

  • QuickVPN on Windows 7 64-bit - Won't Connect

    There are a number of threads in regard to QuickVPN and issues with Windows 7 64-bit.  However, most of them appear to be older (more than a month or two old), or have become inactive with no solution found.  I know the latest version of QuickVPN is supposed to solve the issue, but that doesn't appear to be the case in my situation.  Example threads:
    -https://supportforums.cisco.com/message/3079016#3079016
    -https://supportforums.cisco.com/message/3136206#3136206
    I have a couple of clients on WinXP Pro successfully using QuickVPN to connect to our WRVS4400N.  However, one client has Windows 7 64-bit.  I've installed the latest version of QuickVPN (QVPN_UTL_1.4.0.5), and uninstalled Norton Internet Security (resetting the Windows Firewall to defaults).  However, it still fails to connect, giving me a "Remote gateway is not responding." dialog.

    Hi,
    can you also specify, how did you installed Win7?
    Using Recovery CDs? or?
    Note, that RnR needs to modify the boot loder of Windows and if the access is blocked, due to permissions, then this situation of course will happen.
    However, there is also a second option, on how to get RnR installed and this is using a command line installation which will NOT install the RnR partition.
    NOTE: the change in the boot loder is needed only for the creation of this RnR partition.
    For more info, please read the following RnR manual:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/rnr43dg.pdf
    Feel free to ask any other question.
    Cheers

  • Stuttering in certain videos in iTunes for Windows 7 and Windows 8

    I have stuttering in certain videos in the most recent version of iTunes in Windows 7 64-bit and Windows 8 64-bit.  The two specific videos I am talking about are video podcasts...."Windows Weekly HD", and "Security Now HD".  The strange thing is that I can play those videos in Windows Media Player, VLC, Zune, etc, and there is no stuttering at all.  I have no issue with stuttering audio with iTunes.
    Does anyone have any idea how to fix this?  It is really annoying to have to use other software just to watch certain videos.  I appreciate your time.
    Also...this has happened on fresh installs of Windows 7 & 8 on the same PC.  I have also tried removing and re-installing iTunes, and all of my drivers for my software are updated, and I have all the updates for Windows.

    Hello,
    Here is an article that discusses an alternative to QuickVPN for Windows 8.
    Alternative VPN Setup for Windows 8 on the RV016, RV042, RV042G and RV082 VPN Routers
    Let me know if this helps.
    Alex

  • How to Configure VPN in RV016 using Qucik VPN for Windows 7 and Windows 8?

                    Hi guys,
    we have Cisco RV016 VPN Router configured with local subnet of 10.10.10.0/24 and one Static IP 117.218.xxx.xxx.for Local Gateway which is connected in WAN1 interface of RV016 Router.
    I have created the VPN tunnel in client to gateway as well as group vpn and created the users as well.
    i bounded the protocols for IP sec UDP500,UDP4500,TCP 10000,L2TP 1701 in dual wan page.
    i enabled all the firewall rules except remote management.
    I am using the quick vpn client in windows 7 machine which is connected but i unable to access the LAN devices like Host,printer,camera etc.
    I used the qucik vpn in windows 8 machine its says "Remote gateway not responding.do u want wait? "
    i will be happy and will appriciate if you guys give right solution
    Regards
    Karthik

    Hello,
    Here is an article that discusses an alternative to QuickVPN for Windows 8.
    Alternative VPN Setup for Windows 8 on the RV016, RV042, RV042G and RV082 VPN Routers
    Let me know if this helps.
    Alex

  • Quick VPN 1.2.5 and Windows Vista

    Hi, I have managed to install QuickVPN on Windows Vista, but It won´t connect to my WRV200 router. I have have enabled that the if the router is pinged it will reply but QuickVPN does not get connected. I had no problems with XP, does somebody managed to get QuickVPN work under Windows Vista? Regards, Julix

    I'm having the exact same problem too.
    I can't get any help from the technical support line as well.
    it works fine on the same connection with an XP computer, but vista won't go.
    I'm trying to vpn from a relative's house, connected directly to the network router with an external ip of 149.x.x.x  the router is configured to have an internal subnet of 192.169.1.x
    The vpn client connects, applies policy, and then sits waiting to verify connection.
    This issue is NOT a problem with the gateway subnets being the same.

  • QuickVPN; RVS4000; Windows Vista 64 bit

    I apologize for the cross post, I originally posted this in "Small Business Wireless"
    I  am trying to configure a client to work with a RVS4000 using QuickVPN.   The client is running Windows Vista x64.  I have turned the firewall  (Windows builtin) on/off and entered custom rules in the advanced  firewall allowing both inbound and outbound ICMPv4 traffic.
    The client hangs at "Verifying Network..." and then I receive the  infamous "Remote Gateway is not responding..." dialog.
    The interesting aspect is this:  I am running VMWare on the same  client and have a guest version of Windows XP32 running.  Using the same  version of QuickVPN 1.4.0.5 I have no problems.  Therefore the  intervening hardware is not the issue.
    Following is the log text from the Vista x64 attempt:
    2010/06/14 14:29:51 [STATUS]OS Version:  Windows Vista
    2010/06/14 14:29:51 [STATUS]Windows Firewall Domain  Profile Settings: ON
    2010/06/14 14:29:51 [STATUS]Windows Firewall  Private Profile Settings: ON
    2010/06/14 14:29:51 [STATUS]Windows  Firewall Private Profile Settings: ON
    2010/06/14 14:29:52 [STATUS]One  network interface detected with IP address 192.168.150.62
    2010/06/14  14:29:52 [STATUS]Connecting...
    2010/06/14 14:29:52  [STATUS]Connecting to remote gateway with IP address: server1.rach.net
    2010/06/14  14:29:56 [STATUS]Remote gateway was reached by https ...
    2010/06/14  14:29:56 [STATUS]Provisioning...
    2010/06/14 14:30:05 [STATUS]Success  to connect.
    2010/06/14 14:30:05 [STATUS]Tunnel is configured. Ping  test is about to start.
    2010/06/14 14:30:05 [STATUS]Verifying  Network...
    2010/06/14 14:30:11 [WARNING]Failed to ping remote VPN  Router!
    2010/06/14 14:30:14 [WARNING]Failed to ping remote VPN  Router!
    2010/06/14 14:30:17 [WARNING]Failed to ping remote VPN  Router!
    2010/06/14 14:30:18 [WARNING]Failed to ping remote VPN  Router!
    2010/06/14 14:30:19 [WARNING]Failed to ping remote VPN  Router!
    2010/06/14 14:30:22 [WARNING]Ping was blocked, which can be  caused by an unexpected disconnect.
    2010/06/14 14:30:23  [STATUS]Disconnecting...
    2010/06/14 14:30:29 [STATUS]Success to  disconnect.
    Has anyone succesfully opened a VPN tunnel with QuickVPN  and Vista x64?

    QuickVPN Client 1.4.0.5 runs on Windows XP/Vista/7. If your RVS4000 has the latest firmware 1.3.x, you should give the Small Business Support team a ring, 1-866-606-1866.
    http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

  • QuickVPN and RV042 not verifying network

    I installed an RV042 this weekend at my home office that has dual DSL connections.  The unit works great except now I am offsite and I cannot get to the VPN.  The frustrating thing is that the quickVPN CONNECTS it just does not verify the connection via the remote ping.
    2009/06/08 08:48:19 [STATUS]OS Version: Windows XP
    2009/06/08 08:48:19 [STATUS]Windows Firewall is OFF
    2009/06/08 08:48:19 [STATUS]One network interface detected with IP address 10.15.25.xxx
    2009/06/08 08:48:19 [STATUS]Connecting...
    2009/06/08 08:48:26 [STATUS]Remote gateway was reached by https ...
    2009/06/08 08:48:26 [STATUS]Provisioning...
    2009/06/08 08:48:33 [STATUS]Tunnel is connected successfully.
    2009/06/08 08:48:33 [STATUS]Verifying Network...
    2009/06/08 08:48:37 [WARNING]Failed to ping the remote VPN Router!
    2009/06/08 08:48:38 [WARNING]Failed to ping the remote VPN Router!
    2009/06/08 08:48:39 [WARNING]Failed to ping the remote VPN Router!
    2009/06/08 08:48:40 [WARNING]Failed to ping the remote VPN Router!
    2009/06/08 08:48:41 [WARNING]Failed to ping the remote VPN Router!
    2009/06/08 08:48:42 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    As you can see the windows firewall is off, I have a 10.15.25 address on the client side, (The VPV side is 192.168.100.xxx).  So the tunnel connects okay but the network verification fails.  SO this means that 443 from where I am is open.  Of course who would block 443 anyhow?  Is there an access rule that needs to be created to allow ping to the local address of the router or something?  If so that is not in the documentation anywhere.  Help please?

    David,
    This is definitely *not* resolved, and I am having the exact same problem with an RV042 (firmware version 1.3.12.19-tm) from a WIndows 7 Ultimate (v6.1.7100) platform.
    All of the ports on the RV042 are fully available from the internet.  Here is an nmap scan of the entire RV042:
    C:\Users\markm>nmap 173.13.184.201
    Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-10 22:12 Pacific Standard Time
    Interesting ports on 173-13-184-201-sfba.hfc.comcastbusiness.net (173.13.184.201
    Not shown: 995 filtered ports
    PORT      STATE  SERVICE
    80/tcp    open   http
    113/tcp   closed auth
    443/tcp   open   https
    1723/tcp  open   pptp
    60443/tcp open   unknown
    Here's the screen shot of QuickVPN (not much to tweak):
    When try and connect, it get's all the way through everything, but hangs on "Verifying network..."  This is the classic "can't ping the server" problem...  FWIW, I inserted a copy of my QuickVPN logfile at the end of this post.
    I see a lot of guys trying crazy stuff, but no answers, or even suggestions that seem to understand the problem.  Maybe I should turn this around a little...
    Has *anyone* successfully connected using QuickVPN under Windows?  If so, can you please describe your configuration?  I suspect this tool worked once in '98, and Linsys/Cisco still thinks it works. 
      As best I can tell, the tool simply hasn't worked since at least WinXP, maybe Win2K.
    Helllllllllllllllllllllllllllllllllllllp!
    -Mark
    Log file after unsuccessful connection attempt (with 2 retries):
    2010/02/10 21:54:55 [STATUS]OS Version: Windows XP
    2010/02/10 21:54:55 [STATUS]Windows Firewall is ON
    2010/02/10 21:54:55 [STATUS]One network interface detected with IP address 10.69.1.100
    2010/02/10 21:54:55 [STATUS]Connecting...
    2010/02/10 21:54:55 [STATUS]Connecting to remote gateway with IP address: 173.13.184.201
    2010/02/10 21:55:00 [STATUS]Remote gateway was reached by https ...
    2010/02/10 21:55:00 [STATUS]Provisioning...
    2010/02/10 21:55:04 [STATUS]Tunnel is configured. Ping test is about to start.
    2010/02/10 21:55:04 [STATUS]Verifying Network...
    2010/02/10 21:55:10 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:13 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:16 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:19 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:22 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:25 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2010/02/10 21:55:33 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:34 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:35 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:36 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:37 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:38 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2010/02/10 21:55:46 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:49 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:52 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:55 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:55:58 [WARNING]Failed to ping the LAN IP of the remote VPN Router!
    2010/02/10 21:56:01 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2010/02/10 21:56:05 [STATUS]Disconnecting...
    2010/02/10 21:56:13 [STATUS]Tunnel is disconnected successfully.

  • Quickvpn RV120w windows 7 64bit problem

    We are testing a VPN using quickvpn and a Rv120w router. We tested using windows XP and it worked wonderfully. Now, we are testing it using windows 7 64bit home premium and doesn't work. The problem doesn't seem to be originated within the router, since it works on a different computer (The one with xp ).
      After searching in the forum many posts, we found nothing that could help us. The firewall is already on and the ICMP is allowed, ECO is enabled and the ports 443, 500, 4500 and 60443 are opened.
    We wondering if you had any more ideas we could try. I find important to add that we had the exact same problem with the exact same configuration but using the WRV210. Thank you very much for taking the time to answer and help us out.
    Here is the log that quick VPN generates:
    STATUS]OS Version: Windows 7
    2013/07/19 17:21:56 [STATUS]Windows Firewall Domain Profile Settings: ON
    2013/07/19 17:21:56 [STATUS]Windows Firewall Private Profile Settings: OFF
    2013/07/19 17:21:56 [STATUS]Windows Firewall Private Profile Settings: OFF
    2013/07/19 17:21:56 [STATUS]One network interface detected with IP address 192.168.1.6
    2013/07/19 17:21:56 [STATUS]Connecting...
    2013/07/19 17:21:56 [DEBUG]Input VPN Server Address = xxx.dyndns-free.com
    2013/07/19 17:21:58 [STATUS]Connecting to remote gateway with IP address: xx.232.181.xxx
    2013/07/19 17:21:59 [WARNING]Server's certificate doesn't exist on your local computer.
    2013/07/19 17:22:01 [STATUS]Remote gateway was reached by https ...
    2013/07/19 17:22:01 [STATUS]Provisioning...
    2013/07/19 17:22:10 [STATUS]Success to connect.
    2013/07/19 17:22:10 [STATUS]Tunnel is configured. Ping test is about to start.
    2013/07/19 17:22:10 [STATUS]Verifying Network...
    2013/07/19 17:22:16 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:22:19 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:22:22 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:22:25 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:22:28 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:22:43 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2013/07/19 17:22:45 [STATUS]Disconnecting...
    2013/07/19 17:22:50 [STATUS]Success to disconnect.
    2013/07/19 17:23:32 [STATUS]OS Version: Windows 7
    2013/07/19 17:23:32 [STATUS]Windows Firewall Domain Profile Settings: ON
    2013/07/19 17:23:32 [STATUS]Windows Firewall Private Profile Settings: ON
    2013/07/19 17:23:32 [STATUS]Windows Firewall Private Profile Settings: ON
    2013/07/19 17:23:33 [STATUS]One network interface detected with IP address 192.168.1.6
    2013/07/19 17:23:33 [STATUS]Connecting...
    2013/07/19 17:23:33 [DEBUG]Input VPN Server Address = jumaf.dyndns-free.com
    2013/07/19 17:23:34 [STATUS]Connecting to remote gateway with IP address:xx.232.181.xxx
    2013/07/19 17:23:35 [WARNING]Server's certificate doesn't exist on your local computer.
    2013/07/19 17:23:39 [STATUS]Remote gateway was reached by https ...
    2013/07/19 17:23:39 [STATUS]Provisioning...
    2013/07/19 17:23:48 [STATUS]Success to connect.
    2013/07/19 17:23:48 [STATUS]Tunnel is configured. Ping test is about to start.
    2013/07/19 17:23:48 [STATUS]Verifying Network...
    2013/07/19 17:23:53 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:23:56 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:23:59 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:24:02 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:24:05 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:24:20 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2013/07/19 17:24:53 [STATUS]Disconnecting...
    2013/07/19 17:24:58 [STATUS]Success to disconnect.
    2013/07/19 17:26:57 [STATUS]OS Version: Windows 7
    2013/07/19 17:26:57 [STATUS]Windows Firewall Domain Profile Settings: ON
    2013/07/19 17:26:57 [STATUS]Windows Firewall Private Profile Settings: ON
    2013/07/19 17:26:57 [STATUS]Windows Firewall Private Profile Settings: ON
    2013/07/19 17:27:04 [STATUS]OS Version: Windows 7
    2013/07/19 17:27:04 [STATUS]Windows Firewall Domain Profile Settings: ON
    2013/07/19 17:27:04 [STATUS]Windows Firewall Private Profile Settings: ON
    2013/07/19 17:27:04 [STATUS]Windows Firewall Private Profile Settings: ON
    2013/07/19 17:27:04 [STATUS]One network interface detected with IP address 192.168.1.6
    2013/07/19 17:27:04 [STATUS]Connecting...
    2013/07/19 17:27:04 [DEBUG]Input VPN Server Address = xxx.dyndns-free.com
    2013/07/19 17:27:05 [STATUS]Connecting to remote gateway with IP address: xx.232.181.xxx
    2013/07/19 17:27:06 [WARNING]Server's certificate doesn't exist on your local computer.
    2013/07/19 17:27:09 [STATUS]Remote gateway was reached by https ...
    2013/07/19 17:27:09 [STATUS]Provisioning...
    2013/07/19 17:27:18 [STATUS]Success to connect.
    2013/07/19 17:27:18 [STATUS]Tunnel is configured. Ping test is about to start.
    2013/07/19 17:27:18 [STATUS]Verifying Network...
    2013/07/19 17:27:24 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:27:27 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:27:30 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:27:33 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:27:36 [WARNING]Failed to ping remote VPN Router!
    2013/07/19 17:27:50 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2013/07/19 17:27:55 [STATUS]Disconnecting...

    If you have one of the earier Mac Pro models like 1,1, 64 bit mode is not supported by Apple.
    I got it working by decompressing the 3.0 installer, and manually installing 64 bit drivers in admi mode. After that, the updaters (3.1, 3.2) worked.
    But with Lion, the Control Panel is broken, since it does not recognize the new disk information holding startup info, and refuses to load.
    Do not use BootCamp 4 on the older configurations. I ended up not being able to boot, nor uninstall the disaster.

  • Wrvs4400v2 and quickvpn and sprint network

    I have used for 1 year my laptop to connect to my office with quickvpn...my router at the office is  wrvs4400v2 and i use my sprint phone as a modem without any problem...last week i chance phone and even though all the settings are the same, i am getting the"Connection failed" from the quickvpn and cannot vpn into my office...i have check all my settigns and they look the same on the phone as last phone and sprint as usual will not help....Anybody can help me or have any idea where the problem can be??
    Thanks
    P.D..i am using windows xp professional

    Is your sprint device you have a modem/router in one? In order for the QVPN, the WRVS4400 router should be receiving a public IP address. If your modem is also a router, you need to make the modem act as a regular modem only so that the WRVS4400 will receive a public IP address. Also make sure that you are using the latest firmware for the said router. You can download the latest firmware of the router on this link:
    http://www.cisco.com/en/US/products/ps9931/index.html 
    Other than this, I suggest contacting CISCO tech support to further look into your problem. I believe this unit belongs to the business series devices that Cisco is now supporting. Try to go to this link for the other business series devices and the site where you can get hold of Cisco for support:  
    http://www.cisco.com/web/products/linksys/index.html

  • QuickVPN and Routeur VPN WRVS4400n

    Hi,
    I use a WRVS4400n in my office. The configuration is ok.
    I would like configure a VPN connection.
    The remote control in HTTPS is OK.
    For the VPN, I use QuickVPN on Windows XP SP2.
    When i connect the VPN, i get a error message from the software :
    "the remote gateway is not responding."
    On windows, i desactivate the firewall and the connexion doesn't work.
    On the router, i desactive the firewall, modify the mtu to 1400, desactivate the IPS, DOS and 'block the wan request.
    And nothing, i have always the error message.
    What do i do ?
    thanks alot

    raviex81 wrote:
    Did you try different computer or use the 1.2.8 quick vpn utility?
    I'm on the XP system and the last version for this systel is 1.1.0 !
    And i tried on three differents computers running on XP (I don't have Vista system).
    thank for your help.

  • Problem with Sessions and window.open

    Hi,
    Hi everyone,
    Help Please!!!
    I am working with Sevlet session objects and HTML forms and windows. I have an HTML form for the user to supply a username and password. Once the user clicks submit I need to open another browser window that has no toolbar, no location, no status bar, etc. The user should also be able to go back to that login screen and login again and open a 2nd, 3rd, etc. instance of the application. My problem is that each application is being asigned the same sessionId. I believe it is being asigned to the main login window and thus to the other child windows it opens. Is there a way to work around this? Do I need to make the user open another browser window to login? I need to be able to let the user open multiple instances of the application with unique session ids for each.
    Any insight is GREATLY appreciated on this topic. Anything you can tell me about sessions (Java), IE, window.open would help greatly!
    THANK YOU IN ADVANCE!!!
    MA

    To achieve this, you must introduce another level of
    abstraction to the Servlet specifications. When you
    work with JSP/Servlets you use mostly the HttpSession
    to handle user related tasks, and the aplication
    context, for things that are common to all users. But
    inside the HttpSession scope, you want to create
    containers that have 'smaller' scope and are uniquely
    identified.
    A ipothetical scenario :Let's say that you must have
    multiple connections to several databases, on each
    database user rights beeing diferrent, and you must be
    able to track user actions globaly, and eventualy
    capture a 'Close Application event' and close all db.
    connections.
    1. when the user first accesses the login frame create
    the HttpSession. In the HttpSession object, store a
    Hastable (let's call it 'ConnectionTable'). Each
    object in the Hashtable must identify uniqely a
    database connection. Now, to create unique identifiers
    ids, make the keys in the hashtable java.lang.Long
    objects, created using System.getCurrentTimeMillis().
    This guaranties there will be no possible confusion.
    From each new open window, on each request to the
    server, along with the usefull parameters, send the
    connection identifier. When proccessing the request,
    select the object from the Hastable wich corresponds
    to the ID.
    2. Now, the values in the ConnectionTable, must act as
    the containers that I mentioned in the first
    paragraph. The simplest way to do this is to have
    again a Hashtable derived class to do the job, wich
    exploses methods similar to HttpSession: setAttibute (
    Object key, Object value) and getAttibute ( Object
    key, Object value). This container may use internally
    a Hashtable to store object, and explose only the
    getAttribute and setAttribute methods for clarity. Any
    way, this is a problem of implementation. Let's call
    this class CustomSession.
    Now, a textual activity diagram:
    1 user accesses the main page, you start a new
    HttpSession; In the HttpSession object, store the
    ConnectionTable object.
    2. the user enters the userID and pwd and adatabase
    name, and a new window is opened. Let's supose the
    data entered is valid.
    3. when you process the login data, you create a new
    CustomSession object. you put in it whatever you would
    put in your HttpSession. You generate a unique
    identifier using System.CurrentTimeMillis(). Put the
    CustomSession object in the ConnectionTable, using the
    generated id as key. Send the response.
    ..... later on .....
    100. the user asks for a particular action to be
    performed - e.g. a row deletion. The page contains a
    form with text field where the user introduces the
    row number, a submit button and a hidden input with
    the ID.
    101. you process the data. Get the ID from the request
    object, get the ConnectionTable from the session, get
    the CustomSession using the ID as key, do whatever
    your logic was doing, but obtaining the objects from
    the CustomSession instead of HttpSession
    NicNic,
    Very slick idea. I think that it could work and it seems that there would be not security issues because the id that you would store on the client side is the Unique Identifier and not the actual Session Id. Do you forsee any security issues for this implementation?

  • How can I make an icon that links to a webpage that works with Mac and Windows??

    Hi!
    I burn CDs with my photos and send them to clients.   Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website .      Is it posssible to make one of these icons that works with both Macs and Windows machines?  Thanks!

    Now it works!  Thanks, Denico!
    The reason I saved to text:   The first time I followed your instructions, it did not work.   I tried to figure out what I did wrong and saw that you wrote to "save as plain text."   I did not know what this means and there was no option available to save a plain text.  So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant.   And after that, it worked!  But the next thing you know, the icons started duplicating themselves.
    I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
    Thanks for clearing that up.
    But just one question.  WHY does saving as "stationery" make an icon duplicate itself?

  • Is Verizon going to acknowlege the problems with FIOS and Windows Vista

    For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
    I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop.  I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
    I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now.  It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
    This is what daily scenario is:
    When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get  internet access.  After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks.  The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
    Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
    I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
    I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also,  I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
    I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
    P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches. 

    FIOS is short for fiber optics.  fiber optics is different technology than DSL.   
    With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software.  AND they offer you a fix.
    cjacobs001

Maybe you are looking for

  • [Solved] Help needed to interpret errors (python)

    Have the following code (Haven't written it my self and don't know much about how it does what it's supposed to do.): #!/usr/bin/python import sys import os import re import logging import json if sys.version_info < (3, 0): from urllib2 import Reques

  • Can't connect with new SSID to my HP Officejet 6700

    I recently changed internet services and suddenly I cannot connect to my printer. When I enter the Settings then the Network areas on the printer, everything is locked and it does not show my new SSID (or ANY SSID, actually). I'm stuck and I have a p

  • Software update doesn't let me update anything after installing Snow Leopar

    Hi there, I have just upgraded my iMac from Leopard OS X v10.5.8 to Snow Leopard OS X v10.6, straight from the DVD. The installation went well, but my Magic Mouse was not working properly, so I ran Software Update to see if I needed a new update for

  • Lightning USB Cable not working

    My lightning USB cable stopped working today. I tried to plug it in and it didn't charge my phone so I unplugged it and saw that one of the sides of the iPhone hookup looks kind of burned abs chipped off. I would post a picture but I'm not sure how.

  • Tracking error messages sent from OS X?

    I am not using OS X Mountain Lion right now, but with the Notification Centre is there a section which shows you when a Crash Log has been sent? I'm also on the look out for software that can track all of the Crash Log's that have been sent from my c