QuickVPN on Windows 7 64-bit - Won't Connect

There are a number of threads in regard to QuickVPN and issues with Windows 7 64-bit. However, most of them appear to be older (more than a month or two old), or have become inactive with no solution found. I know the latest version of QuickVPN is supposed to solve the issue, but that doesn't appear to be the case in my situation. Example threads:
-https://supportforums.cisco.com/message/3079016#3079016
-https://supportforums.cisco.com/message/3136206#3136206
I have a couple of clients on WinXP Pro successfully using QuickVPN to connect to our WRVS4400N. However, one client has Windows 7 64-bit. I've installed the latest version of QuickVPN (QVPN_UTL_1.4.0.5), and uninstalled Norton Internet Security (resetting the Windows Firewall to defaults). However, it still fails to connect, giving me a "Remote gateway is not responding." dialog.

Hi,
can you also specify, how did you installed Win7?
Using Recovery CDs? or?
Note, that RnR needs to modify the boot loder of Windows and if the access is blocked, due to permissions, then this situation of course will happen.
However, there is also a second option, on how to get RnR installed and this is using a command line installation which will NOT install the RnR partition.
NOTE: the change in the boot loder is needed only for the creation of this RnR partition.
For more info, please read the following RnR manual:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/rnr43dg.pdf
Feel free to ask any other question.
Cheers

Similar Messages

I've upgraded to FF4 uing windows 7 64-bit - won't open when click on shortcut, have tried to reinstall etc, prev ok with version 3+

I've upgraded to FF4 uing windows 7 64-bit - won't open when click on shortcut, have tried to reinstall etc, prev ok with version 3+

I found something that could be a workaround ... wel at least it's gotten me one step further (windows 7 now recognizes the scanner as the right device (symbol usb sync cradle), but step 8 keeps failing.
source : http://www.pocketpcjunkies.com/Uwe/Forum.aspx/wince/5660/Windows-CE-5-or-6-with-Vista-and-Windows-Mobile-Device-Center
1. Install WMDC 6.
2. Plus the Windows CE based device.
3. Close the "Found new hardware" wizard.
4. Right-click on "Computer" and select "Manage"
5. Open the Device Manager, then select the Windows CE based device.
6. Right-click and select "Update driver..."
7. In the wizard, select "pick from a list..."
8. In the list, select "Microsoft USB Sync [Microsoft]".
9. ... nothing else! It works!
Anything else I could try now?The first time I tried step 8, the microsoft usb sync driver was in the list but I got an error while updating the driver. The second time, it didn't appear on the list anymore. I'm thinking this is more of a 64-bit driver problem.
Thanks, Joachim

On my windows 7 machine, itunes won't connect home sharing with apple tv

On my windows 7 machine, itunes won't connect home sharing with my apple tv. This problem started about two itunes updates ago. Any thoughts?

Try a search of the forums or the "More Like This" section to the right.
Also might have better luck posting to the Apple TV forum.

I have Windows 8, 64 bit won't download ITunes

I have windows 8 64 bit, I Tunes won't load

Get the 64 bit version of iTunes from Apple's website here:
http://support.apple.com/kb/DL1615

Windows vista 64 bit won't recognize driv

Hello: I am running windows vista 64 bit with 4 gigs of ram and I have loaded all the software that is on the cd and went to the website and loaded the 64 bit drivers but am having problems with the computer system not recognizing the camera or the drivers at all. Is there something else I need to do for this to work I am running Creative Live Cam Voice. Thanks. Mark

I'm in a similar situation with the Intel 6850, 4 MB of RAM, and the Xi-Fi Extreme Music. I am running VISTA Home Premium 64 bit. I bought my new computer at the end of Sept. and the sound has been on and off mostly off since then. Most of the time I just get static. I have the latest driver installed (I think its Nov. 4) but very, very poor sound.

Hp laserjet 1022 windows 7 (64 bit) won't install printer, what can i do?

1. HP LaserJet 1022 Printer
2. Windows 7 64-bit
3. No Error Message
4. The only changes made to the system are security upgrades from Windows Updater. This is a new computer and the old one was running XP.
I have tried removing the printer, downloading newer software (lj1020-HB-pnp-WIN64-en) and trying to install it, adding the printer through windows and still the printer will not work. The cd version will run until it asks you to plug in the printer and then nothing happens. I even tried leaving it running overnight to see if it would find it and install, but nothing happened. This printer is a workhorse for me and I would like to keep it running, any suggestions on getting this printer recognized and running again?
This question was solved.
View Solution.

In the Device Manager see if the 1022 is listed under Other devices.
Under "Other devices" right click on HP 1022
Select "Update Driver Software...."
Select "Browse my computer for driver software"
Select "Let me pick from a list of device drivers on my computer"
Select "Printers" > Next
Under "Manufactures" > HP
Under "Printers" > HP Laserjet 1020
Select "Yes" to warning popup
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Blackberry Desktop Software 6.0 & Windows 7 64 Bit, Won't launch after install

Hi, I've been using previous versions of the desktop software before just fine. I updated to Desktop Software 6.0 on my Windows 7 64 Bit machine and the install finishes without any errors.
When I attempt to open it, I get a title bar that says Blackberry Desktop Software but the frame is empty. I can maximize or minimize this box. In the taskbar there is a blackberry software icon.
I've uninstalled and reinstalled the software but it doesn't help. No errors or prompts.
Please assist,
Pavel

I deleted bb desktop icon i do have bb 6.0 software installed second time i am know running cc cleaner i believe my old 5.0 said x86 i don't know but how can we do all these advancements and no pop up just show the 5.0 i believe i got the 6.0 on my other computer i remember it did have to install uninstall a couple of times but i really don't remember put it this way i enjoy this stuff but this is just the open area you know it's right in front of you but you have not seen it and the next guy will walk up and go it's right there don't you see it life is fun you got to just regroup and go at it again sincerely a true novice how do people make all these programs and where are they know when you need them this is the key not a message board i want the source at my finger tip when you excel in this then we will eleviate some suffering in the mean time please explain the message board yes is nice but what you need is mandatory software geek to put answer in here for know problems when he is aware he can put message in here there should already be a tech solution for this in here i typed in bb software desktop 6.0 64-bit windows 7 ultimate on bb solution did not have anything in there know did I type wrong did i not go to right spot to type even so bb needs to adjust to help send customer to right area

Rescue and Recovery 4.3 on Windows 7 64 bit won't install

Hi,
I had to reinstall my Windows 7 and when I did that I accidentally wiped away the Recovery partition. I didn't think this would be a problem but now I am trying to install Rescue and Recovery 4.3 on Windows 7 64 bit and I keep getting this error
"Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6"
I am wondering why I am getting this error and how I can install Rescue and Recovery 4.3?

Hi,
can you also specify, how did you installed Win7?
Using Recovery CDs? or?
Note, that RnR needs to modify the boot loder of Windows and if the access is blocked, due to permissions, then this situation of course will happen.
However, there is also a second option, on how to get RnR installed and this is using a command line installation which will NOT install the RnR partition.
NOTE: the change in the boot loder is needed only for the creation of this RnR partition.
For more info, please read the following RnR manual:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/rnr43dg.pdf
Feel free to ask any other question.
Cheers

ITunes for Windows 7, 64-bit version not connecting to iPod

Hi, everyone! I'm having problems connecting my iPod Touch to iTunes version 11.0.1.12. I'm running Windows 7, 64-bit version on my PC. Whenever I open iTunes with my iPod Touch connected to my PC, iTunes immediately gives me the following error message:
"This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
This confuses me because I already have the 64-bit version for Windows 7 installed on my PC. I've already uninstalled and reinstalled the 64-bit version three times; however, I'm still getting the same error message whenever I connect my iPod Touch and open iTunes.
Any help would be greatly appreciated. Thanks!

now nothing happens when I connect the iPod by USB - it's not even charging.
Do you have a laptop, Nin?
If so, the following document might be of some assistance with that:
[iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
(That issue seems to match your recognition and charging symptoms.)

Windows 7 64 bit and ODBC connect to Sql data source

Hi
Just porting a simple test form over to new laptop with windows 7 64 bit and my odbc connect strings are not working properly.
They seem to work with Microsoft access, but not livecycle designer.
I tried the 32 bit ODBC drivers, and at least I can see the first record, but now I get an error when I try and execute a drop down to select a different record.
Looking at the forum history, a lot of Windows 7 issues but did not see one for ODBC connections....
Anyone have ODBC working on a Win 7 64 bit system?
Do they work?
Do the 32 bit drivers work?

I believe that the 64 bit drivers are NOT working
the 32 bit drivers are working.- have them working now!

Windows 7 64 bit won't let me install itunes 64bit!

I have problems with 2 computers.
They are both by Gateway, one of them is a SX series Windows 7 Home Premium 64 bit, 1 TB, 4GB of RAM, intel i3 Dual Processor, and was just out of the box. The other one is a DX series Windows 7 Home Premium 64bit, 1.5TB, 6GB of RAM, Intel i5 Dual processor, and also, out of the box.
The first thing I do is install itunes.
However, in the middle of installing, it said this error:
an error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32".version="8.0.50727.6195",publicKeyToken="1fc8b 9a1e18e3b",processorArchitecture="x86".Please refer to Help and Support for more information. HRESULT: 0x80070005.
I clicked okay, and it continuted on.
Just when it finished quicktime, it asked to verify the location of Mozilla Plugins for ntunes.dll or something like that. It won't let me through after that. I tried using other computers what have access through this, but it says that I need administrator permission to do so. However, I AM the Administrator. It is on the 2 computers.
Anyone know what is going on with itunes?

I have no idea what check box you are talking about or how you are trying to open a PDF. This is not the Reader forum where you should be asking this question. However, to set Reader as the default, you should be able to right click on the PDF and select open with, select Reader, and then check the box to always use this application to open a PDF.

Windows 7 64 bit won't run any .exe starting with VM*

In my Windows 7 Professional 64 bit machine, executable whose name starting with "VM" is getting terminated after starting the process. For eg: vmd.exe, vmtest.exe etc will be forcefully terminated once it is started its execution. But if I rename
them to some other, it would execute without any issues. Looks very wired. Please help?

I suggest you use the
Process Monitor to capture the details. Run the same .exe with and without "vm" name. Then compare the processes. See if there's any clue.
Regards,
Miya
Miya Yao
TechNet Community Support

Windows 7 64 bit won't resume after being locked

Hello,
My Windows 7 Pro computer will not resume after being locked.
I use a Domain controller based on Windows server 2008 R2, and if I login with my username on any other PC, I do not have this Problem.
When I lock it to go out for some reason, it won't resume at all. I left it on the welcome screen for an hour or so, and it didn't start.
Do you guys have any idea what might be causing this ?
Thank you very much for your help

If this behavior is not exhibited on any other systems in your environment, I believe it's safe to assume the issue is with the local client.
First things first: check that you have the latest drivers for your system. I know this seems like a canned answer, but I've seen hundreds of cases where a missing or legacy disk controller driver causes all manner of strange behavior on an otherwise healthy
system.
Years ago, when SSDs first starting becoming popular, I purchased a handful of them from a specific vendor. We started seeing issues with resuming from S3 sleep that confounded us for months. We found out that the vendor used a specific brand and chipset
on their SSD controllers that wound up causing firmware faults when Windows was resumed; even to the point that we had to shut down the PC, unplug it, and let the caps drain before we could boot it again!
We wound up replacing the drives with a more mainstream/popular brand and the issues never happened again, but the problem was hardware related. Your post reminded me of those few months of confusion.
Check that all of your drivers are up to date, esp. disk and video, and don't rely on the Microsoft generic drivers. If you can find the drivers for your mobo/gfx cards, prefer that route.

QuickVPN; RVS4000; Windows Vista 64 bit

I apologize for the cross post, I originally posted this in "Small Business Wireless"
I am trying to configure a client to work with a RVS4000 using QuickVPN. The client is running Windows Vista x64. I have turned the firewall (Windows builtin) on/off and entered custom rules in the advanced firewall allowing both inbound and outbound ICMPv4 traffic.
The client hangs at "Verifying Network..." and then I receive the infamous "Remote Gateway is not responding..." dialog.
The interesting aspect is this: I am running VMWare on the same client and have a guest version of Windows XP32 running. Using the same version of QuickVPN 1.4.0.5 I have no problems. Therefore the intervening hardware is not the issue.
Following is the log text from the Vista x64 attempt:
2010/06/14 14:29:51 [STATUS]OS Version: Windows Vista
2010/06/14 14:29:51 [STATUS]Windows Firewall Domain Profile Settings: ON
2010/06/14 14:29:51 [STATUS]Windows Firewall Private Profile Settings: ON
2010/06/14 14:29:51 [STATUS]Windows Firewall Private Profile Settings: ON
2010/06/14 14:29:52 [STATUS]One network interface detected with IP address 192.168.150.62
2010/06/14 14:29:52 [STATUS]Connecting...
2010/06/14 14:29:52 [STATUS]Connecting to remote gateway with IP address: server1.rach.net
2010/06/14 14:29:56 [STATUS]Remote gateway was reached by https ...
2010/06/14 14:29:56 [STATUS]Provisioning...
2010/06/14 14:30:05 [STATUS]Success to connect.
2010/06/14 14:30:05 [STATUS]Tunnel is configured. Ping test is about to start.
2010/06/14 14:30:05 [STATUS]Verifying Network...
2010/06/14 14:30:11 [WARNING]Failed to ping remote VPN Router!
2010/06/14 14:30:14 [WARNING]Failed to ping remote VPN Router!
2010/06/14 14:30:17 [WARNING]Failed to ping remote VPN Router!
2010/06/14 14:30:18 [WARNING]Failed to ping remote VPN Router!
2010/06/14 14:30:19 [WARNING]Failed to ping remote VPN Router!
2010/06/14 14:30:22 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2010/06/14 14:30:23 [STATUS]Disconnecting...
2010/06/14 14:30:29 [STATUS]Success to disconnect.
Has anyone succesfully opened a VPN tunnel with QuickVPN and Vista x64?

QuickVPN Client 1.4.0.5 runs on Windows XP/Vista/7. If your RVS4000 has the latest firmware 1.3.x, you should give the Small Business Support team a ring, 1-866-606-1866.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Windows 7, 64 bit, won't recognize my new ipad 4

When Ipad4 is connected to computer by usb cord, the ipad is not recognized.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

QuickVPN on Windows 7 64-bit - Won't Connect

Similar Messages

Maybe you are looking for