Quiet removing Antivirus SCCM Endpoint Protection without user intervention

Antivirus SCCM
2012 Endpoint Protection is deployed on Workstations.Can
I uninstall Endpoint Protection on the
computers on the network automatically via SCCM or command-line tools
invisible from the user?

You need to create a package to uninstall the
SCCM 2012 Endpoint Protection.
Uninstall string: C:\Windows\ccmsetup\scepinstall.exe
/u /s
Make sure you disable End point protection policy and select False or No in
Manage Endpoint Protection client on client computers, otherwise the client will be reinstall.
http://technet.microsoft.com/en-us/library/4acd0c29-e453-4863-8194-e479263291c8#BKMK_EndpointProtectionDeviceSettings
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable.
Thanks.

Similar Messages

Generate a Report Dynamically without User Intervention and Output to XML

Here's the scenario for which I am trying to find a solution. Any help would be greatly appreciated.
I have a series of reports that the users generate from a UI by selecting the report, setting the values for a list of parameters, and then click a submit button. The report is generated in the UI for them to view. They can print it from here or export it to Excel.
They would like to be able to schedule a report to run daily without user intervention using a saved set of parameters. The system would run the report automatically and email it to a defined set of email addresses.
To do this, we need to have the report generated in a string or xml so a Java process can read it and email it.
I see that I can change a report's template to export:xml so I feel that it is possible. How can I export a report to XML without user intervention? Can the report template be changd dynamically at runtime? Ideally, I need some way to call this same report and have it output as a string data or xml to be used by a Java process that would store and generate the report for email.

Hi Kumar,
From Program1 you are calling Program2, using submit syntax (inside Program1).
While using submit, if you have correctly filled up the selection screen of program2, then it will AUTOMATICALLY get executed, WITHOUT F8.
If there is any compulsary field in program 2, which does not get populated, then it will not run automatically, or unless some special code is written in program2.
If you do not want the output of Program2 on screen, then u can use
SUBMIT Program2 AND RETURN.
In that case, no selection screen (of program2) will appear and neither the output of program 2.
Regards,
Amit Mittal.
Edited by: Amit Mittal on Dec 23, 2009 4:10 PM

Can You Play Multiple Playlists Without User Intervention

Can you stack and play multiple playlists? ie if you had three playlists of 50 songs each, could you pick all three, play all the songs in the first playlist, when it is finished move automatically to the second playlist play its songs then automatically move to the third without user intervention? And if so, can you play each of these in shuffle mode?

There's no "impromptu" method of doing so that I know of.
As far as un-impromptu methods (it's always fun inventing words), it will depend on whether you want to listen to this mega-playlist on an iPod or just with iTunes.
If it's just with iTunes, you can go to the File menu > New Folder command and create a new folder which we can call the Mega-Playlist folder. Drag the three playlists in question into that folder. When you select that folder and press Play, iTunes should go through all the songs.
If it's on an iPod, since Folders don't transfer over from iTunes, the only solution I know of would be to create a Smart Playlist with iTunes that will -
Match any of the following rules:
Playlist is the first playlist +
Playlist is the second playlist +
Playlist is the third playlist.
Synching this mega-playlist to your iPod will allow you to select it from the Playlist menu.
Shuffle mode would shuffle songs from all three playlists together, not shuffle songs from the first playlist before moving on to shuffling songs from the second playlist before shuffling songs from the third playlist.

Material creation without user intervention

i have to create a material without user intervention. i am using BAPI_MATERIAL_SAVEDATA for this. it is not showing any error. but the return is having the message 'No description found'. how to transfer the description to this bapi.
this is the code i am trying:
DATA: mnum like zmara01-mno,
       mat_data like BAPIMATHEAD,
       plantx_data like BAPI_MARCX,
       salesx_data like BAPI_MVKEX,
       sale_data like bapi_mvke,
       plant_data like bapi_marc,
       mate_data like bapi_makt,
       E1BP_MAKT like E1BP_MAKT,
       cli_data like bapi_mara.
DATA: E_RETURN LIKE BAPIRET2.
data: MATERIALDESCRIPTION like BAPI_MAKT
                  occurs 0 with header line.
*data: m(18) type c.
CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          NR_RANGE_NR                  = '01'
          OBJECT                       = 'ZMNUMBER'
         QUANTITY                      = '1'
       IMPORTING
         NUMBER                        = mnum.
message i003(zmsg) with mnum.
mat_data-material = mnum.
mat_data-ind_sector = 'I'.
mat_data-matl_type = 'DIEN'.
mat_data-basic_view = 'X'.
cli_data-base_uom = 'EA'.
cli_data-base_uom_iso = 'X'.
sale_data-sales_org = 'EISO'.
sale_data-distr_chan = 'SR'.
salesx_data-sales_org = 'EISO'.
salesx_data-distr_chan = 'SR'.
plant_data-plant = 'EIHO'.
plantx_data-plant = 'EIHO'.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    HEADDATA                   = mat_data
   CLIENTDATA                 = cli_data
CLIENTDATAX                =
   PLANTDATA                  = plant_data
   PLANTDATAX                 = plantx_data
FORECASTPARAMETERS         =
FORECASTPARAMETERSX        =
PLANNINGDATA               =
PLANNINGDATAX              =
STORAGELOCATIONDATA        =
STORAGELOCATIONDATAX       =
VALUATIONDATA              =
VALUATIONDATAX             =
WAREHOUSENUMBERDATA        =
WAREHOUSENUMBERDATAX       =
   SALESDATA                  = sale_data
   SALESDATAX                 = salesx_data
STORAGETYPEDATA            =
STORAGETYPEDATAX           =
FLAG_ONLINE                = ' '
FLAG_CAD_CALL              = ' '
NO_DEQUEUE                 = ' '
IMPORTING
   RETURN                     = E_RETURN
TABLES
   MATERIALDESCRIPTION        = MATERIALDESCRIPTION
UNITSOFMEASURE             =
UNITSOFMEASUREX            =
INTERNATIONALARTNOS        =
MATERIALLONGTEXT           =
TAXCLASSIFICATIONS         =
RETURNMESSAGES             =
PRTDATA                    =
PRTDATAX                   =
EXTENSIONIN                =
EXTENSIONINX               =
loop at materialdescription.
message I004(I) with materialdescription-matl_desc.
endloop .
MESSAGE I004(I) WITH E_RETURN-TYPE.
    if sy-subrc = 0.
     message i005(zmsg).
    elseif sy-subrc <> 0.
     message e006(zmsg).
    endif.
i am trying to give direct entries to test it . please help in this issue immediately.

Hi dear,
welcome on board!
If you want an answer immediately I think you have to post your question in a more appropriate forum...
take a look to https://www.sdn.sap.com/sdn/collaboration.sdn and choose one of the available forums !
Good luck!
Roberto

Animate elements one by one without user intervention

Hi, Good Day,
I have series of rectangles and textblocks on page.
I need to show them moving at different places one by one according to the contents of textblock without user intervention.
If I use for loop then it show movement of only last rectangle as I have to stop the storyboard in each iteration of loop.
Is there any way to move these rectangles automatically one after another????
sunaina

A storyboard has a completed event. I think that's the easiest way to handle this sort of requirement.
You could chain them.
So you get a reference to a storyboard, add a handler to it's completed event which starts the next storyboard...
And start it.
Obviously you will have storyboards which do something or other but here's how I attach anonymous completed eventhandlers to a storyboard:
Storyboard sb1 = new Storyboard();
Storyboard sb = new Storyboard();
sb.Duration = new TimeSpan(0, 0, 1);
sb.Completed += new EventHandler(delegate(object s, EventArgs a)
sb1.Begin();
sb.Begin();
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

[CS4] save on a local file without user intervention

hey,...sorry for my english...
i work with a other application who need to have the
information written in the local file without an user intervention
so...
i would like to know if it s possible to write or rewrite on
a local file without intervention of the user...
whitout the ""save dialogue box" or with a managed save
dialogue box...
how to write in a local file without user intervention...
i need really an answer to make real my project...
thans for your conprehension

hey
thx a lot for your help ...
if i understand well ...
it is possible to write or rewrite in a specific folder
who is determinated by the application folder of
an specific AIR apllication
who during his install give the ""authorization to
write/rewrite /save in his specific installation foder"
so it s possible with combination of an AIR application.....
can you give me some information about this AIR application
that i must build...
some direction to ask help
because i dont have the knowledges to do that
what style/type of AIR application
what charachteristics of this AIR application....
so some information that can i use to ask help in the good
place...
one more time thx a lot for your help...;)

SCCM Endpoint Protection Removal of Trend Micro OfficeScan v10 assistance

Hi,
I just thought i might ask this,
i see that Endpoint Protection has the ability to uninstall "Trend Micro OfficeScan"
We have "Trend Micro OfficeScan 10", we have protected ours with a password,
i would just like to know when i deploy the Endpoint Agent if it still has the ability to uninstall it altough it has a password connected to it
or would i need to manually uninstall it,
On big issue i have is that the password is one of 25 passwords also.
any assistance will do on this.
Kind Regards

It should be able to uninstall TrendMicro. The best thing is to test it against a collection with a few devices. You can control the SCEP installation by creating a custom client setting and deploy that to a test collection - it doesn't have to be a big
bang
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

System Center 2012 Endpoint Protection - any user may reboot Windows Server

Hello,
I've got System Center 2012 Endpoint Protection client installed on a Windows Server 2008 R2 Terminal Server. I've just noticed that if System Center Endpoint Protection detects some malware that requires system restart in order to successfully clean it,
the notification will be seen by all logged users on Terminal Server and if anyone will press on "Restart" than the Server will reboot even if User hasn't the required permission and I think this is totally unacceptable, Microsoft has to do something
about it. In all situations only an Administrator should have the right to restart the Server.
Please fix this issue asap, thank you.

While there is no setting that just controls the 'SCEP needs to reboot', there are other settings that might help.
Have you tried setting "Disable the client user interface" to Yes on the antimalware policy? How about "Show notifications messages..."? I don't have a way to reproduce the behavior you were seeing, but maybe you can give it a shot.
I understand why Microsoft would want to give non-admin users a prompt to reboot a machine that needs it to remove malware. This is the typical scenario for most workstations. However, your exception with a terminal server is definitely something that
needs a workaround.
If you put in Connect feedback asking for a discreet setting to control this, please post a link to it.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Remove system center endpoint protection (scep) from clients

Hi,
I enabled scep for my whole domain, now I would like to remove some clients of smaller servers which have less performance (also specific template policy for performance scep didn't help).
I created a new client setting in which I enabled the scep for a specific collection only, the default has no scep enabled.
However, scep is not uninstalled for clients which are not member of the specific collection.
Please advise howto remove scep clients.
S.
SteveWonB

One more thing, off the record, do you need to create auto deployment rules of SCEP, according to windows-noob.com you do.
http://www.windows-noob.com/forums/index.php?/topic/4466-using-sccm-2012-rc-in-a-lab-part-5-enable-the-endpoint-protection-role-and-configure-endpoint-protection-settings
Somewhere else I see that updates are done automatically (CBT Nuggets instruction video of SCEP install).
These updates are slowing down my machines: although I selected superseded: no, in updates, it downloads day per day definition updates and applies them. Whereas I would think it downloads only the latest definition file ....
SteveWonB
hi,
please note that the link above has been replaced with new content since Configuration Manager 2012 went RTM, to see the new version review
this post.
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Deploying SCCM EndPoint Protection Client with updates?

Am using SCCM 2012 r2 and need to get the EndPoint Protection Client built int o my image.
If I deploy it post-imaging the laptop, how do I get the latest definitions?
Because it shows up with a red icon in the system tray and I have to go in and manually update the definitions after I install it.
Is there a task that could be done in an OSD to update the definitions?
Otherwise only way I can think of is preinstall and update and get the full scan done before capturing an image of my system to deploy to other systems.

Hi,
If you use Endpoint Protection on all computer including the latest definitions in your Build and Capture saves time.
Otherwise ,the command line in windows works fine ,trigger an update of SCEP at the end of the task sequence:
"%Program Files%\Microsoft Security Client\mpcmdrun.exe" -SignatureUpdate
Here are some great articles for you reference:
Operating System Deployment and Endpoint Protection Client Installation
http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/operating-system-deployment-and-endpoint-protection-client-installation.aspx
How to Configure Definition Updates for Endpoint Protection in Configuration Manager
http://technet.microsoft.com/en-us/library/jj822983.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Spaces are switching without user intervention

I generally use 4 spaces and I've noticed on Mavericks apps will not stay ont he same space they are assigned too. I've also noticed designated spaces switching without any user intervention. For example "Desktop 3" and "Desktop 4" switch places and 4 will become 3 and visa versa. Has anyoen else encountered this?

I am also experiencing problems where I lose a route and I get disconnected from the internet. I get it back by issuing a command:
route get 192.168.2.1 (my wireless router)
route get 192.168.1.254 (my DSL modem)
However, I have no idea why this gets deleted in the first place.
if you discover an answer please do post it here.
Thanks,
Ted

Events without user intervention

I am developing a control application in which in open loop the user has interaction with controls in the GUI and a generation of events begin an action. However in closed loop the controller generates the values and rewriten the values at the controls in the GUI without intervention of user in the GUI. The events are not identified within the events loop located within the white loop. I am trying to work with Dynamically Registering Events but i am not have sucess. The specific question is how generated an event when a value control changes without the intervention of the user in the GUI

Use a property node for the front panel control and select the property
"Value (Signaling)". When writing to this property, the event is
triggered.

Events/without user intervention at the GUI

I am developing a control application in which in open loop the user has interaction with controls in the GUI and a generation of events begin an action. However in closed loop the controller generates the values and rewriten the values at the controls in the GUI without intervention of user in the GUI. The events are not identified within the events loop located within the white loop. I am trying to work with Dynamically Registering Events but i am not have sucess. The specific question is how generated an event when a value control changes without the intervention of the user in the GUI

Gracias por utilizar los foros
la solucion ya la tienes en esta liga
http://forums.ni.com/ni/board/message?board.id=170&message.id=196808#M196808
saludos
Erwin Franz R.

HOw to download a file in background without user intervention?

Hello people,
A few hours ago I asked a couple of guys how to download a file to html. For that I am most thankful, and as mentioned this is a two part question, my other question is about how to proccess downloading the html in background and to automatically send it to a folder or other path. Without any user intervention.
Example, I run a long report to be downloaded in background. The lets say the next day, I can get the file in a folder. Thanks guys take care!

Hello guys thanks for your help so far. I have been off again on again with this task because its more for future purposes than anything.
So far I have searched the net and stuff and decided that I will use WWW_LIST_TO_HTML since I want to download it the way it is. I am also going to use open/close dataset as many of you have mentioned.
SO far Im just trying it out with a simple report program to see its funcitonalities. My code goes like this.
<b>REPORT ZCCYT_COOL2 NO STANDARD PAGE HEADING LINE-COUNT 100 .
DATA: IFIELDS TYPE TABLE OF W3FIELDS WITH HEADER LINE.
*DATA: ihtml   TYPE TABLE OF w3html   WITH HEADER LINE.
DATA: IHTML   TYPE TABLE OF W3_HTML WITH HEADER LINE.
DATA: BEGIN OF I_TAB OCCURS 0,
        MATNR LIKE MAKT-MATNR,
        MAKTX LIKE MAKT-MAKTX,
      END OF I_TAB.
SELECT-OPTIONS: SO_MATNR FOR I_TAB-MATNR.
SELECT MATNR MAKTX
FROM MAKT
INTO TABLE I_TAB
WHERE MATNR IN SO_MATNR..
LOOP AT I_TAB.
WRITE: / I_TAB-MATNR,
           I_TAB-MAKTX.
ENDLOOP.
CALL FUNCTION 'WWW_LIST_TO_HTML'
   EXPORTING
       list_index = sy-lsind
     TABLES
          HTML       = IHTML.
DATA: FILE TYPE LOCALFILE.
FILE = '/usr/test.html'.
OPEN DATASET FILE FOR OUTPUT IN BINARY MODE.
LOOP AT IHTML.
TRANSFER IHTML TO FILE.
ENDLOOP.
CLOSE DATASET FILE.</b>
NOw the problem now though is that the file isnt downloading or saving at all. I cant seem to get what is wrong since the path does exist and the this seems the universal way to implement the program. Im guessing the problem lies in the file name, because everything seems to work fine. Hope to hear again soon sorry for not visiting this place sooner cuz I was buzy elsewhere.

Displayed a message box then removed it by a program without user action

Can a message box be displayed by a program and then removed by the program without any user action such as clicking OK or closing the box?
If so, will you show us how to do that?
I have a non-GUI application which needs to tell the user to wait while classes and being created and data is being loaded from the network. The message needs to disappear when the program is ready.
Thanks!

Here is an example of using the JDialog you will have to make it look like you want I just pieced this together real quick
import javax.swing.*;
public class test extends Object
    public test()
        longOperation();
        System.exit(0);
    public void longOperation()
        JDialog dialog = new JDialog();
        dialog.getContentPane().add(new JLabel("Wait"),java.awt.BorderLayout.CENTER);
        dialog.setSize(200,200);
        dialog.setVisible(true);
        // used to simulate a long operation
        Thread t = Thread.currentThread();
        try
            t.sleep(2000);
        }catch(Exception e){}
        dialog.dispose();
    public static void main(String args[])
        new test();
}

Quiet removing Antivirus SCCM Endpoint Protection without user intervention

Similar Messages

Maybe you are looking for