Quiet sound in headphones with macbook pro

After an upgrade to os x mavericks sound through the headphones was much quieter. Quieter than on the phone. After an upgrade to os x yosemite problem persists. The volume to maximum. Without headphones playing as usual. In Audio-MIDI setup all channels at maximum. The problem with all types of headphones
Sorry for bad english.
Macbook Pro (Retina, 13-inch, Late 2012) core i-5. os x Yosemite 10.10.

Try a PRAM reset:
http://support.apple.com/kb/PH14222?viewlocale=en_US
Ciao.

Similar Messages

5.1 Surround Sound Altec Lansing with Macbook Pro

I am sure this question has been asked many times before, but I couldn't find an answer. I have 5.1 Dolby Digital Surround Sound Altec Lansing speakers that came with my Dell Desktop from several years ago, and I recently switched over to mac by purchasing a macbook pro. I would like to know what the best way, if any, would be to get the speakers working with my macbook.
The 5 surround sound speakers plug into the back of the subwoofer, and the subwoofer has 3 cables (I'm guessing right/left/subwoofer) that connect to the back of the desktop. Are there any adapters that would allow me to use them with my macbook pro? Is there any way to just stream whatever sound I want to those speakers? Is it even possible? Any help would be appreciated. Thanks!

Is there a way to identify which computer outputs support 5.1 sound? It is a media center PC, but I can't find that information anywhere.

Jaybird headphones and Macbook Pro Retina bluetooth connectivity issues

I recently purchased the Jaybird Bluebuds X Premium headphones and for awhile it would connect to my new Macbook Pro Retina 15'' via bluetooth, but now it doesn't anymore. The headphones connect just fine to my phone (iPhone 4S), and other Macbook Pros (not retina), but they do not connect to other Macbook Pro Retinas. I was wondering if this was a connectivity issue with Macbook Pro Retinas and if so how can I get around it to connect the headphones again?
Thanks

Hey there LongHorn16,
It sounds like your Bluetooth headphones aren't working with this one computer, but there is no issue with other devices that you have. I would start with these 2 steps from the following article:
Restart your computer
Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
Reset your Bluetooth device
Try turning your device off and then on again. If that doesn't resolve the issue, see if you can reset your device—refer to the documentation that came with your device for instructions.
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
If it still doesn't work, then I would next use this article to remove the device:
Bluetooth: How to Delete a Paired Device
http://support.apple.com/kb/TA27116
Then restart your computer and pair it again:
OS X Lion: Set up a Bluetooth device
http://support.apple.com/kb/PH3647
Thank you for using Apple Support Communities.
Cheers,
Sterling

Sound not working in MacBook Pro OS X

Hello,
I have a mid 2011 MacBook Pro. The silica gel packet in my backpack broke and it went inside my Mac's headphone jack. I tried to remove it with a tooth pic, knife, cotton swab, cotton swab with glue etc etc. And finally sound stopped working when the sillica gel went deep inside. The volume icon is grayed out since then.
At times I see a red light from the headphone jack. I understand that the speaker is ok, because I have a parallel installation of windows and the sound works fine in that! I also hear sound via external speakers and bluetooth headset in OS X. I took it to the Apple Store and they told me that I had to replace the entire motherboard which might cost around $550! I am not ready to do that! Everything else works just fine!
Anyone knows any fix for this problem? My MacBook is mute for a long time

how do i get my sound back on my Macbook pro?

Earpods with MacBook Pro

Used EarPods with MacBook Pro, v. 10.6.8. Worked fine, but when I disconnected them from the laptop, no sound would emit from the laptop speakers. Went to System Preferences-Sound-Output, where the only outbput device listed was "Digital Output".
Also shut down and restarted the laptop, with no success.
Any suggestions?

After numerous attempts, this worked. Thank you . . . but is there any way to avoid this problem? Kind of a nuisance to have to do this every time.

Blue tooth issues with macbook pro late 2011

I purchased the new beats pill and havinng issues with connectivity with macbook pro. My Iphone works well. Any suggestions

I have a similar issue. Have you had any luck with a fix, yet? I have a Samsung sound bar, and my Ipad and Iphone both connect with no issues. The playback is uninterrupted with fine sound quality. My 2011 13" Macbook Pro connects, however playback often sounds like a scratched CD. Last year I called both, Samsung and Apple, and when all was said and done it was recommended that I bring the then brand new sound bar and my Macbook to an Apple Store. Any suggestions I are appreciated.

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

How can I restore data from my iPhone after sync with macbook pro?

I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

Welcome to Apple Support Communities
You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

External hard drive compatible with macbook pro 10.5.8

external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

You can buy just about any USB2.0 hard drive and use it with your MacBook Pro. Many older external drives come pre-partitioned and formatted FAT32 for use on Windows. Your Mac can use that file system as well, but it has limitations on file sizes. You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine. One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
Have searched Adobe website for answer - most recent is 2013 answer, saying no.
Contradicted by a staff ember who only referred to Photoshop, not Elements.
Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
Help, please...

Hello Smis,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices? recent problem starting March 1, 2015.

I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise. As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600.
On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's. Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date! but sadly stays on LTE.
Have tried resetting, replugging etc...
Also, tried checking on updates. Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
A mystery...

Reset the TC to factory and redo the setup. see details below.
Here is the typical list of things you should try.. and if this doesn't help post again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
How is the TC connected into the network? What function does it have? Router or bridge for example.
Post a few screenshots of the setup.

I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling

What is the best external hard drive with MacBook Pro

What is the best external hard drive with MacBook Pro?

I agree with Allan, and that link is also called OWC, their hard drives are great. Have three of their Mercury Pro Elite 2 TB quad interface drives. They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options. Drives seem to come Mac HFS formatted, but I always reformat and partition the drives. Service and quarantees are top notch.
They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

Is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

Read through this:
http://clients.websavers.ca/whmcs/knowledgebase/115/Keeping-your-Sent-folder-in- sync-across-devices.html

What TV's are compatible with Macbook pro using HDMI in the capacity off a monitor?

What TV's are compatatable with Macbook pro to use as a monitor using HDMI?

Hi Ralph,
More information about using HDMI displays with your MacBook Pro is available here -
Mac computers: Frequently asked questions about using HDMI
http://support.apple.com/kb/HT4214
Thanks for using Apple Support Communities.
Best,
Brett L

Quiet sound in headphones with macbook pro

Similar Messages

Maybe you are looking for