Quires regarding re-connecting with AT&T after an year.

Hi,
I was At&t post-paid customer from 2011 till 2014. In 2014 I travelled back to my home country and since I was not in USA, I cancelled the service. The number which held with At&t during that time was ****.
Now I am planning to come back to USA in another 3-4 weeks for long term stay. I do have SNN and an excellent credit history. I have below questions regarding getting a new post-paid connection with At&t.
1. Event though I cancelled my previous service, is it possible to retain the old post-paid number which I had i.e. [edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]?
2. What all documents are required for getting a new post-paid connection?
3. Are there any specific constrains for getting iPhone 6 or 6+?
Kindly please clarify.
Thanks,

1. Chances of getting your old phone number back is almost impossible. It may have already been reassigned to someone else.
2. Doucment's proving who you are should be all that is needed. If you have the paperwork from your old account, it may help prevent a deposit on your account.
3. No constraints on getting the iPhone 6 or 6+ as long as you can pay for it.

Similar Messages

  • Office 2013 - Word cannot establish a connection with this document after the system resumed from suspend mode

    Hiya!
    This issue has been answered numerous times for Office 2010 and Office 2007, but I have yet to any solutions or Hotfixes that work for Office 2013 (x64) on Win7.
    How to replicate the issue:
    Open a file from a network share.
    Edit file.
    Leave computer on with file open. Computer goes to sleep or into stand-by mode.
    Wait a bit
    Wake up computer
    CPU opens file in Read-Only mode and gives you the following error "Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes."
    What I've tried:
    http://support.microsoft.com/kb/2434898 - Office 2007 registry fixes. Does not apply.
    http://support.microsoft.com/kb/2413659 - Office 2010 problem. This exact issue. Says 'No microsoft products that match this hotfix are installed'
    Work Around:
    I can saving new versions of these files overrides this issue, but this is sometimes not possible for end-users who only have specific access to ONE SPECIFIC FILE in a particular network share.
    Please let me know how I can alleviate this issue!
    Thanks
    -Chris

    Hi,
    Are those problematic documents created via previous versions of Office?
    Please also try to run a repair of your Office 2013 installtion and check if it helps. See:
    http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
    Regards,
    Steve Fan
    TechNet Community Support

  • I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable

    I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.

    4 possible causes of that message:
    1] Activation server is actually down. Very rare occurrence, but it does happen.
    When it does occur, down time is very short. Solution - try again.
    2] Your firewall or antivirus are blocking the connection. Solution - temporarily
    deactivate your firewall or antivirus until the update completes.
    3] Computer being used for the activation has previously been used to jailbreak
    an iOS device. Solution - use a computer that has not been used to jailbreak an
    iOs device.
    4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
    may have made changes that will prevent the iPhone from successfully activating.
    Terms of Use for this forum prohibit discussion of jailbroken iPhones.

  • ACS loses connection with AD occasionally after upgrade from 5.2 to 5.3.0.40

    ACS had been integrated with Active Directory before ACS upgrade to 5.3. After the ACS 5.3 upgrade users aren’t able to login to AAA devices occasionally. Error message is:
    {AuthenticationResult=Error; Type=Authentication; Authen-Reply-Status=Error; }
    24429 Could not establish connection with Active Directory
    At the same time, when this issue occurs, ACS connection to AD works fine (checked with Users and Identity Stores> External Identity Stores > Active Directory “Test Connection”)

    I had the same problem, I opened a Cisco TAC case and my issue was resolved.
    Sent: Tuesday, 14 August 2012 9:58 AM
    Subject: RE: 622739355 HelpDesk#SVR328332-2 : Troubleshoot Cisco ACS 1121 v5.3 With Windows Active Directory
    Hi Ramraj,
    Thanks for the link to the article, but from what I’ve seen in the logs I’m not sure that we’ve got the same root cause to the issue.
    From the ACSADAgent.log files I can see log messages like:
    Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG network.state NST: SniffList: postfailsort=mykulad11p.cssc.dksh.net
    Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.kerberos.adhelpers Encryption (id 1) is not supported by KDC. Try next in the list
    Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.osutil Module=Kerberos : KDC refused skey: KDC has no support for encryption type (reference base/adhelpers.cpp:216 rc: -1765328370)
    Aug 11 11:10:56 CSSC-TPM-DC-ACS-1 adclient[5524]: DEBUG base.adagent Unable to refresh computer credentials: KDC refused skey: KDC has no support for encryption type
    This lines up with the error message that we see in the TACACS+ Authentication logs:
    24493 ACS has problems communicating with Active Directory using its machine credentials.
    I have come across a NETBIOS limitation (it’s not an ACS bug, but a bug has been filed for tracking and documentation purposes) that prevents two ACSs from being connected to Active Directory at the same time if the first 15 characters of their hostnames are the same. The bug ID is CSCtj62342 and its externally visible details are available here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj62342
    The hostname of the primary ACS is : MYMY-TPM-DC-ACS-1
    The hostname of the secondary ACS is: MYMY-TPM-DC-ACS-2
    From the hostnames, we can see that the first 16 characters of the hostnames are the same. What this means is that once the primary is connected to AD, after some time passes (this will depend on when the secondary goes an talks to AD) the secondary will lose its connection to AD and any authentications hitting the secondary will fail with the same error: 24493 ACS has problems communicating with Active Directory using its machine credentials.
    To resolve this issue, the hostnames of the ACSs will need to be changed so that the first 15 characters of their respective hostnames are not the same. Please keep in mind that this is a NETBIOS limitation and not a software bug.

  • Problem regarding to connection with database

    while opening the SQL server 2008,it is unable to connect with database, showing as error 2

    1. Make sure SQL Server Service is running
    2. If a named instance, make sure SQL Server browser service is running
    3. Make sure SQL Server is configured to allow remote connections
    4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
    5. Test server connectivity with PING from the client machine
    6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine.  For example
    a. TELNET <server-name> 1433
    b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
    7. Check firewall settings if step 5 or 6 connectivity test fails
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • My mac mini loses connection with my receiver after turning off the receiver then back on

    My Mac Mini loses connection with my Onkyo receiver NR-609 after turning off the receiver then back on.  The only way to reistablish the connection is to unplug then replug the HDMI cable to the Mac Mini.  There's no effect if I unplug then replug the HDMI to the receiver.  Any help or suggestions would be appreciated.  I've searched a lot but haven't found much of anything so if this is covered elsewhere I would greatly appreciate a link.
    Thanks in advance

    Hi and thanks.  I don't know about the audio prefs.  When it happens I am not able to see or hear anything from the computer until I un/re-plug the HDMI to the Mini.  I'm not sure it's changing to something else because there's nothing else connected for it to change to.  I could see that perhaps the audio will change to the Mac Mini's internal speaker. 
    I found out last night that if, after I lose the signal,  I use my ipad to play a video on the Mac Mini using the Remote app and home sharing the signal gets righted and I can see/hear the computer again.  It's quite an inconvenient fix though and I wish and hope someone here can help me.

  • [Solved] Cannot connect with wifi-menu after login

    I can't connect to the internet after I login.  When I try to connect, it says:
    Job for netctl@my\x2dnetwork.service failed. See "systemctl status 'netctl@my\x2dnetwork.service'" and "journalctl -xe" for details.
    #systemctl status 'netctl@my\x2dnetwork.service'
    ● netctl@my\x2dnetwork.service - A simple WPA encrypted wireless connection
    Loaded: loaded (/etc/systemd/system/netctl@my\x2dnetwork.service; enabled; vendor preset: disabled)
    Active: failed (Result: exit-code) since Fri 2015-02-06 16:37:35 CST; 1min 23s ago
    Docs: man:netctl.profile(5)
    Process: 574 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
    Main PID: 574 (code=exited, status=1/FAILURE)
    Feb 06 16:37:35 mac network[574]: Starting network profile 'my-network'...
    Feb 06 16:37:35 mac network[574]: The interface of network profile 'my-network' is already up
    Feb 06 16:37:35 mac systemd[1]: netctl@my\x2dnetwork.service: main process exited, code=exited, status=1/FAILURE
    Feb 06 16:37:35 mac systemd[1]: Failed to start A simple WPA encrypted wireless connection.
    Feb 06 16:37:35 mac systemd[1]: Unit netctl@my\x2dnetwork.service entered failed state.
    Feb 06 16:37:35 mac systemd[1]: netctl@my\x2dnetwork.service failed.
    #journalctl -xe
    Feb 06 16:37:17 mac dbus[217]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
    Feb 06 16:37:17 mac udisksd[436]: udisks daemon version 2.1.3 starting
    Feb 06 16:37:17 mac dbus[217]: [system] Successfully activated service 'org.freedesktop.UDisks2'
    Feb 06 16:37:17 mac udisksd[436]: Acquired the name org.freedesktop.UDisks2 on the system message bus
    Feb 06 16:37:18 mac polkitd[271]: Registered Authentication Agent for unix-session:c2 (system bus name :1.29 [/usr/lib/polkit-gnome/polkit-gnome-authen
    Feb 06 16:37:18 mac dbus[217]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
    Feb 06 16:37:18 mac avahi-daemon[481]: Found user 'avahi' (UID 84) and group 'avahi' (GID 84).
    Feb 06 16:37:18 mac avahi-daemon[481]: Successfully dropped root privileges.
    Feb 06 16:37:18 mac avahi-daemon[481]: avahi-daemon 0.6.31 starting up.
    Feb 06 16:37:18 mac avahi-daemon[481]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
    Feb 06 16:37:18 mac dbus[217]: [system] Successfully activated service 'org.freedesktop.Avahi'
    Feb 06 16:37:18 mac avahi-daemon[481]: Successfully called chroot().
    Feb 06 16:37:18 mac avahi-daemon[481]: Successfully dropped remaining capabilities.
    Feb 06 16:37:18 mac avahi-daemon[481]: Loading service file /services/sftp-ssh.service.
    Feb 06 16:37:18 mac avahi-daemon[481]: Loading service file /services/ssh.service.
    Feb 06 16:37:18 mac avahi-daemon[481]: Network interface enumeration completed.
    Feb 06 16:37:18 mac avahi-daemon[481]: Registering HINFO record with values 'X86_64'/'LINUX'.
    Feb 06 16:37:18 mac avahi-daemon[481]: Server startup complete. Host name is mac.local. Local service cookie is 1997621208.
    Feb 06 16:37:18 mac avahi-daemon[481]: Service "mac" (/services/ssh.service) successfully established.
    Feb 06 16:37:18 mac avahi-daemon[481]: Service "mac" (/services/sftp-ssh.service) successfully established.
    Feb 06 16:37:30 mac sudo[510]: mac : TTY=pts/0 ; PWD=/home/mac ; USER=root ; COMMAND=/usr/bin/wifi-menu
    Feb 06 16:37:30 mac sudo[510]: pam_unix(sudo:session): session opened for user root by mac(uid=0)
    Feb 06 16:37:35 mac network[574]: Starting network profile 'my-network'...
    Feb 06 16:37:35 mac network[574]: The interface of network profile 'my-network' is already up
    Feb 06 16:37:35 mac systemd[1]: netctl@my\x2dnetwork.service: main process exited, code=exited, status=1/FAILURE
    Feb 06 16:37:35 mac systemd[1]: Failed to start A simple WPA encrypted wireless connection.
    -- Subject: Unit netctl@my\x2dnetwork.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit netctl@my\x2dnetwork.service has failed.
    -- The result is failed.
    Feb 06 16:37:35 mac systemd[1]: Unit netctl@my\x2dnetwork.service entered failed state.
    Feb 06 16:37:35 mac systemd[1]: netctl@my\x2dnetwork.service failed.
    Feb 06 16:37:35 mac sudo[510]: pam_unix(sudo:session): session closed for user root
    Feb 06 16:37:48 mac dbus[217]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager
    Feb 06 16:37:48 mac dbus[217]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop
    Feb 06 16:37:50 mac logger[626]: ACPI action undefined: PNP0C0A:00
    Feb 06 16:38:31 mac logger[653]: ACPI action undefined: PNP0C0A:00
    Feb 06 16:39:13 mac logger[657]: ACPI action undefined: PNP0C0A:00
    When I ip link set ... down, I wifi-menu and it connects.  No need to ip link set ... up.
    Here's my /etc/systemd/system/netctl\@my\\x2dnetwork.service as mentioned above.
    .include /usr/lib/systemd/system/[email protected]
    [Unit]
    Description=A simple WPA encrypted wireless connection
    BindsTo=sys-subsystem-net-devices-wlp4s0.device
    After=sys-subsystem-net-devices-wlp4s0.device
    Not sure if this is relevant.  Also mentioned above.  This is /usr/lib/network/network.
    #! /bin/bash
    . /usr/lib/network/globals
    ## Check if a string represents a network interface
    # $1: potential interface name
    is_interface() {
    # Strip any old school alias specifier
    [[ -d "/sys/class/net/${1%%:?*}" ]]
    ## Add an interface
    # $1: interface type
    # $2: interface name
    # $3: interface link (optional)
    # $4...: additional arguments
    interface_add() {
    local type="$1" name="$2" link="$3"
    do_debug ip link add ${link:+link "$link"} name "$name" type "$type" "${@:4}" || return
    if [[ -x "$PROFILE_DIR/interfaces/$name" ]]; then
    source "$PROFILE_DIR/interfaces/$name"
    fi
    ## Delete an interface
    # $1: interface name
    interface_delete() {
    bring_interface_down "$1"
    ip link delete "$1"
    ## Check if an interface is up
    # $1: interface name
    interface_is_up() {
    local flags
    read flags < "/sys/class/net/${1%%:?*}/flags"
    # IFF_UP is defined as 0x1 in linux/if.h
    (( flags & 0x1 ))
    ## Activate an interface
    # $1: interface name
    bring_interface_up() {
    local interface=$1
    ip link set dev "$interface" up &>/dev/null
    timeout_wait "${TimeoutUp:-5}" 'interface_is_up "$interface"'
    ## Deactivate an interface
    # $1: interface name
    bring_interface_down() {
    local interface=$1
    ip link set dev "$interface" down &>/dev/null
    # We reuse the up timeout (down normally is faster)
    timeout_wait "${TimeoutUp:-5}" '! interface_is_up "$interface"'
    if [[ $# -ne 2 || $1 != @(start|stop) ]]; then
    exit_error "Usage: $0 {start|stop} <profile>"
    fi
    ensure_root netctl
    # Ensure we are not in a transient directory
    cd /
    # Expose the profile name
    Profile=$2
    load_profile "$Profile"
    case $1 in
    start)
    report_notice "Starting network profile '$Profile'..."
    if is_interface "$Interface" && interface_is_up "$Interface" && \
    ! is_yes "${ForceConnect:-no}"; then
    report_error "The interface of network profile '$Profile' is already up"
    exit 1
    fi
    if ! "${Connection}_up"; then
    report_error "Failed to bring the network up for profile '$Profile'"
    exit 1
    fi
    # JP: sandbox the eval
    if ! ( eval $ExecUpPost ); then
    report_error "ExecUpPost failed for network profile '$Profile'"
    # Failing ExecUpPost will take the connection down
    "${Connection}_down"
    exit 1
    fi
    report_notice "Started network profile '$Profile'"
    stop)
    report_notice "Stopping network profile '$Profile'..."
    # JP: sandbox the eval
    if ! ( eval $ExecDownPre ); then
    report_error "ExecDownPre failed for network profile '$Profile'"
    # Failing ExecDownPre will leave the profile active
    exit 1
    fi
    if ! "${Connection}_down"; then
    report_error "Failed to bring the network down for profile '$Profile'"
    exit 1
    fi
    if is_interface "$Interface" && interface_is_up "$Interface" && \
    ! is_yes "${ForceConnect:-no}"; then
    report_error "The interface of network profile '$Profile' did not go down"
    exit 1
    fi
    report_notice "Stopped network profile '$Profile'"
    esac
    Last edited by rollypolio (2015-02-07 16:37:01)

    I honestly don't remember.  I believe I was trying to set up i3status dhcp at the time.  Could have been the DHCP configuration file I created at /etc/systemd/network that broke my netctl configuration.  I should have mentioned that first.  I broke the internet and walked away two days ago and it's slowly coming back to me.  I don't follow the relation between systemd, netctl, and dhcp configuration so I'm sorry if I'm not picking up on solutions provided in your links.
    I commented the file out right after I started receiving those errors.
    $cat /etc/systemd/network/MyDhcp.network
    #[Match]
    #Name=wlp4s0
    #[Network]
    #DHCP=v4
    $ls -la /etc/systemd/network/MyDhcp.network
    drwxr-xr-x 2 root root 4096 Feb 6 09:29 .
    drwxr-xr-x 5 root root 4096 Feb 5 20:15 ..
    -rw-r--r-- 1 root root 43 Feb 6 09:29 MyDhcp.network
    $cat /etc/netctl/my-network
    Description='A simple WPA encrypted wireless connection'
    Interface=wlp4s0
    Connection=wireless
    Security=wpa
    IP=dhcp
    ESSID='ap_becca'
    # Prepend hexadecimal keys with \"
    # If your key starts with ", write it as '""<key>"'
    # See also: the section on special quoting rules in netctl.profile(5)
    Key='*********'
    # Uncomment this if your ssid is hidden
    #Hidden=yes
    # Set a priority for automatic profile selection
    #Priority=10
    #cat /etc/netctl/wlp4s0-Nexxt_5F6CB8
    Description='Automatically generated profile by wifi-menu'
    Interface=wlp4s0
    Connection=wireless
    Security=none
    ESSID=Nexxt_5F6CB8
    IP=dhcp
    #cat /etc/netctl/wlp4s0-SJBS
    Description='Automatically generated profile by wifi-menu'
    Interface=wlp4s0
    Connection=wireless
    Security=wpa
    ESSID=SJBS
    IP=dhcp
    Key=********
    I noticed the first profile does not require sudo.
    $ ls -la
    total 32
    drwxr-xr-x 5 root root 4096 Feb 2 09:32 .
    drwxr-xr-x 81 root root 4096 Feb 7 09:42 ..
    drwxr-xr-x 2 root root 4096 Jan 31 22:50 examples
    drwxr-xr-x 2 root root 4096 Jan 13 07:23 hooks
    drwxr-xr-x 2 root root 4096 Jan 13 07:23 interfaces
    -rw-r--r-- 1 root root 422 Jan 31 22:52 my-network
    -rw------- 1 root root 138 Feb 2 09:32 wlp4s0-Nexxt_5F6CB8
    -rw------- 1 root root 145 Feb 2 06:36 wlp4s0-SJBS
    I hope this helps.
    Which one should I be looking at?:
    $ls /usr/lib/systemd/system/ | grep netctl
    [email protected]
    [email protected]
    netctl.service
    [email protected]
    netctl-sleep.service
    To repeat myself, I can connect using wifi-menu after I ip link set wlp4s0 down.  I'm just looking for a fix so I can set up automatic connections.
    EDIT: I deleted /etc/systemd/network/MyDhcp.network and now it works at startup.  Any idea why a commented out file would be having an adverse effect like this?
    Last edited by rollypolio (2015-02-07 16:41:41)

  • My iPhone won't connect to the Internet after new year. What can I do?

    WHy won't my iPhone 6 connect to the Internet after the new year? My wife has the same phone and it works. I have tried wifi or lte. I woke up this morning jan 1 2015 and it will not connect to anything.

    Settings>General>Reset
    Choose Reset Network Settings
    Your phone will restart. Test internet after that.
    ~Lyssa

  • Can't connect with wi-fi after upgrade to 10.9.5

    Hi all,
    My elderly Dad's MacBook Pro, retina display (bought August 2013) is having terrible problems connecting to his router/modem. Wi-fi just doesn't exist for him anymore.
    In fact, a message box pops up and tells him the network I set up for him (and which worked fine until his very recent upgrade to 10.9.5) "isn't available to join".
    I read where others are also having bad wi-fi connection probs since upgrading to 10.9.5.
    1. So first question: Does anyone know how to solve this? I have Apple Care for the computer so I can call them. But wondered if a solution has already been circulated by our community here or by Apple.
    2. Second question: If no one knows of a solution, can anyone advise me on how to get rid of 10.9.5 and then reinstall 10.9.4? I've read several posts where people who have done that no longer have any wi-fi connectivity probs.
    Thanks so much for any help.
    Liz

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
              Wake for Wi-Fi network access
    if it's checked.
    Step 5
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 6
    In the Wi-Fi settings, select
              Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
    Click OK and then Apply.
    Step 7
    Reset the System Management Controller.
    Step 8
    Reset the PRAM.
    Step 9
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    Step 10
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • Outlook can't connect with Exchange 2013 after migration from Exchange 2007

    <style type="text/css">P { margin-bottom: 0.21cm; }</style>
    Hello,
    recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
    But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
    To try to resolve it we've done:
    - Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
    - Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
    records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
    - In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
    Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
    - Check Outlook Anywhere block: we've cheked.
    Currently server state:
    - Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
    unless the mailbox. After a restart it can't start.
    -The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
    I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
    Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
    We continue to try to resolve the problem.
    Thanks to all in advance!
    Testing RPC / HTTP connectivity.
    Error in testing RPC / HTTP.
    additional Details
    Elapsed time: 24295 ms.
    Test steps
    Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
    Error in automatic detection test .
    additional Details
    Elapsed time: 24294 ms.
    Test steps
    Attempting each method of contacting the Autodiscover service .
    Failed to properly contact the Autodiscover service using all methods.
    additional Details
    Elapsed time: 24294 ms.
    Test steps
    Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
    Error in testing this potential Autodiscover URL .
    additional Details
    Elapsed time: 1509 ms.
    Test steps
    Attempting to resolve the host name in DNS empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 80.36.252.194
    Elapsed time: 507 ms.
    Testing TCP port 443 on the host to ensure empresa.com listening or is open.
    The port was opened successfully.
    additional Details
    Elapsed time: 464 ms.
    Testing the SSL certificate to make sure it is valid.
    The SSL certificate is not exceeded one or more certificate validation checks .
    additional Details
    Elapsed time: 537 ms.
    Test steps
    Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
    Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
    additional Details
    Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
    Elapsed time: 454 ms.
    Validating the certificate name .
    The certificate name was validated successfully .
    additional Details
    Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
    Elapsed time: 1 ms.
    Is validating the trusted certificate .
    Validation Error trusted certificate.
    Test steps
    Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = ​​mail.empresa.com .
    Could not build a certificate chain for the certificate.
    Tell me more about this issue and how to resolve
    additional Details
    The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
    Elapsed time: 31 ms.
    Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
    Error in testing this potential Autodiscover URL .
    additional Details
    Elapsed time: 21723 ms.
    Test steps
    Attempting to resolve the host name in DNS autodiscover.empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 46.16.56.40
    Elapsed time: 498 ms.
    Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
    The specified port is blocked , not listening or does not generate the expected response .
    Tell me more about this issue and how to resolve
    additional Details
    Network Error communicating with the remote host.
    Elapsed time: 21224 ms.
    Attempting to contact the Autodiscover service with the HTTP redirect method .
    Error when trying to contact the Autodiscover HTTP redirect method .
    additional Details
    Elapsed time: 606 ms.
    Test steps
    Attempting to resolve the host name in DNS autodiscover.empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 46.16.56.40
    Elapsed time: 14 ms .
    Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
    The port was opened successfully.
    additional Details
    Elapsed time: 202 ms.
    Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
    Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
    additional Details
    Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
    lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
    Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
    Elapsed time: 388 ms.
    Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
    Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
    additional Details
    Elapsed time: 186 ms.
    Test steps
    Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
    Not the Autodiscover SRV record in DNS found .
    Tell me more about this issue and how to resolve
    additional Details
    Elapsed time: 186 ms.
    Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
    Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
    Tell me more about this issue and how to resolve
    additional Details
    No Autodiscover CNAME record for your domain ' empresa.com ' .
    Elapsed time: 268 ms.
    jspt

    Hello,
    We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
    below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
    Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
    $AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
    RunspaceId                           : 89c86f8e-d156-4480-b31d-59215976879b
    Name                                 : EXCHANGE13
    Fqdn                                 : EXCHANGE13.domain.local
    ClientAccessArray                    :
    OutlookAnywhereEnabled               : True
    AutoDiscoverServiceCN                : EXCHANGE13
    AutoDiscoverServiceClassName         : ms-Exchange-AutoDiscover-Service
    AutoDiscoverServiceInternalUri       : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
    AutoDiscoverServiceGuid              : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
    AutoDiscoverSiteScope                : {Nombre-predeterminado-primer-sitio}
    AlternateServiceAccountConfiguration :
    IsOutOfService                       : False
    WorkloadManagementPolicy             : DefaultWorkloadManagementPolicy_15.0.825.0
    Identity                             : EXCHANGE13
    IsValid                              : True
    ExchangeVersion                      : 0.1 (8.0.535.0)
    DistinguishedName                    : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
                                           (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=First Organization,CN=Microsoft
                                           Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
    Guid                                 : e83055fe-217b-4ed6-9cd0-7711097baf99
    ObjectCategory                       : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
    ObjectClass                          : {top, server, msExchExchangeServer}
    WhenChanged                          : 09/03/2014 12:46:07
    WhenCreated                          : 08/03/2014 19:15:54
    WhenChangedUTC                       : 09/03/2014 11:46:07
    WhenCreatedUTC                       : 08/03/2014 18:15:54
    OrganizationId                       :
    OriginatingServer                    : severdc.domain.local
    ObjectState                          : Unchanged
    I hope this stuff can help you.
    Thanks!!
    jspt

  • Connection with airport impossible after security update

    Hei
    I'm new on mac computers;
    after downloading the security update, i have a problem with my airport. The airport is working, it detect my Livebox, knows it name. It ask me to give the WEP key to access to this livebox a message. i give it and then it says that an error occured while connecting to this livebox.
    My code is good, my livebox is on association position (to accept new computer,...)
    Someone could help me?
    Thank you very much
    Yannick

    Thank you for answer but it didn't work. The message written is the same message than the one you have when you enter a wrong WEP key: "an error occured while accessing to the airport network "livebox- XXXX"". Is that can be a problem of security? Maybe the network can't access to my computers keys?
    If someone have an ideas. Thank you much

  • ITunes and App Store not connecting with Apple id after iOS 8

    After updating to iOS 8.0.2, I have tried updating apps and buying music but nothing happens on my iPhone 5 or my iPad.  Can someone help with this?  All it shows it the rotating circle saying it's looking or working or whatever but even after logging in with the Apple id nothing works.  I can connect my phone to the computer and things update but still shows on phone/iPad after that I still need to update apps.

    Hi , 
    Welcome to the Apple Support Communities!
    I am sorry to hear that you cannot connect to or download from the iTunes and App Stores. There are some very good troubleshooting steps that I would recommend in this situation. Please follow the steps and information in the article below. 
    Can't connect to the iTunes Store
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time. 
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Have a great day, 
    Joe

  • Regarding Interface connection with US Payroll Data

    Hi Experts,
    Greeting!
    I have some questions regarding Interface (ADP Tool) with USA payroll. Please give me the answer for below questions.
    1) How to send the data ( Garnishment, Benefits, Payroll, PA) to third party tool?.
    2) How to map the things (Wage types) and Which T.Code we use for this?.
    3) What all Technologies required to connect third party tool?.
    4) How will we get the data from third party?
    5) What all documents will create while sending and receiving the data?
    Thanks in Advance.
    Regards,
    Ram

    Hello Ram,
    The transaction for US Payroll outsourcing is PC00_M10_OTEM. I have attached a document to this reply that can be found as an attachment to SAP Note No. 1135822 - "OT:  Outsourcing FAQ Document". Outsourcing is similar to running payroll except the data is exported instead of being calculated.
    Also for reference:
    SAP Note No. 899674 - "FAQ:  First Export for Payroll Outsourcing Interface"
    Regards,
    Manny

  • WRT350N Losing connection with web browser after running Bittorrent client

    My Setup:
    HP Pavillion Dual Core Desktop PC 2GB Memory
    Windows Vista Premium Home
    Linksys Wireless WUSB G Adapter for my destop
    Time Warrner Cable Modem - Webstar Model
    I have had a WRT54G for a long time, and it has been flawless, I decided to buy a Refurbed by Linksys WRT350N because I anticipate getting a new device and devices that will use the Draft N Standard.  Anyhow, I have it set to narrowband to use ONLY Wireless G, have it set up as i Did with my G Router to use WEP with Broadcast SSID ETC ETC, opened up all the same ports forwarded on it and made all same settings as in my WRT54G.
    Here is the problem:
    I typically use a Bittorrent client to download large files to my computer, specifically UTorrent.    With my WRT54G I would get good speeds but even after a couple of hours I would still be able to start my Browser, IE or Firefox 3 and get, albeit slow, but still get my webpages to render.
    Now when UTorrent runs for a couple of hours with my WRT350N I load my web browser and I get a message that says "Cannot connect" or connection is timing out.  Sometimes it will load the page but looks more text like than HTML, and I attribute that to packet loss?
    Anyhow I did use Linksys Tech Support, and they suggested I changed my MTU to a lower setting instead of Auto which I did and it didnt make a difference, welL i shouldnt say that I do get forecastfox to load on FIrefox where it didnt load before and sometimes I get the non html version of the pages to load.
    Any help would be greatly appreciated, I am patient and LOVE a project and I have a feeling this is going to be one.

    Actually that is what I was doing last night and got a bad flash and bricked my router..so its on its way back to Linksys...

  • Why can't itunes connect with my nas after last update

    There seems to be a problem with smb nas servers after yesterdays mountain lion update as I can no longer get iTunes to accerss it. I can mount the nas on the desktop and access all files from it but itunes and finder fails to connect.
    anyone got any suggestion?

    It didn't work for me either.
    My Apple store don't know the answer and have suggested that I connect to a computer and do a full reset and install iOS6 again.
    Not too sure how to do that yet.

Maybe you are looking for

  • Agent Commission

    Dear All, How to map Agent commission in SAP. My client has Agents in between customer and company. When ever he sells the goods that amount will be comes through Agent from customers. based on the Sales amount Agent will get the Commission directly

  • Java 1.6 u38 stopps working on Windows 2008 R2 Terminal Server

    Hello, I have got a strange behavior on our Terminal Server Farm. We have updated our Servers to Windows 2008 R2. Java 1.6 u38 runs fine, but it stops working suddenly. Reinstall solves the Problem, but only for several hours. Then some users are not

  • Java SDO API import bug

    There is a bug in the Oracle Java SDO API. It cannot import compound geometries which consist of either 3 or 4 sub-elements. e.g., the following geometry cannot be imported: SDO_GEOMETRY(2002, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 4, 4, 1, 2, 1, 9, 2, 2

  • Bulk insert into oracle using ssis

    Hi , Can someone please suggest me the way to Bulk insert data into oracle database? I'm using oledb which doesnt support bulk insert into oracle. Pls note I cant use Oracle ATTUnity as it requires enterprise edition but i have only Standard edition

  • How to Save the files attached in tasks

    hi experts , i am using a BPM process, one requirement is to send the files across tasks. i know we have a facility in tasks where we can attach the files and send across, my question is where these files are stored during process and is there any wa