Quirky date changes when resizing columns

I have a new eMac, when I make the date modified and date created columns small, the date goes to 7/31/05 for all files.
When I expand the columns then the dates change to this format Nov 7, 2005 9:00pm. This happens on both the "date modified" and "date created" columns. But the some dates don't reflect the actual date of creation or modification.
I also noticed that when I download files, the modified and created dates don't reflect the actual date I downloaded them. Some items I have downloaded recently, have 2003, 2002, 2000 dates associated with them.
On my G3, all downloads would reflect the actual date download for the modified and created date. Is this not the case with the eMac?
Could it need a battery this soon?
Thank you in advance,
Deb
Update:
I just ran System Profiler and up in the top right hand corner the date says 7/31/05.

Hi JMVP, thanks for replying.
I'm running the org 8.5 on the G3 but have 9.0, 9.2 and 9.22 on my external hd's.
Yes set date automatically is checked. I tried unchecking it and nothing changed.
Timeserver is Apple America/US (time.apple.com)
My biggest concern is why are all the dates changing to 7/31/05 (style, format and using the actual date of 7/31/05) when I squeeze the column width down. But once I start expanding the columns the dates change to, what I'm assuming is the date of their creation and modification, and not the downloaded date.
This may be a stupid question, but what is a relative date, compared to, what a normal date? Every time I check or uncheck this box the dates don't change format, style or anything.
Thanks again for your help.
Deb

Similar Messages

Why is the date changed when I move files to an external drive

The date of my files is changed when I move them to my external Lacie drive.
Is there a way to prevent this?

Hi Luuk, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
This may be of interest
http://discussions.apple.com/thread.jspa?messageID=1463652#1463652
The date is retained in 10.4.8 here, on both a copy and a move to an external firewire drive.
Repairing Permissions in Disk Utility was another fix.

Modification Date changes when updating Open With?!?!

Forgive me if this is mentioned elsewhere. I have been searching these forums and not seen this problem.
If I do a 'Get Info' on a file in the Finder and change the application it opens with, the Modification Date changes to 'now'. Why in the world would this happen? This is not how 10.3.x worked, and certainly doesn't make any sense since I am not actually modifying the file. I am simply changing the OS's metadata about which app to use. This info isn't even stored in the file itself, as evidenced by burning such an document to a CD or moving it through a network server then opening it on a machine with different default apps for certain extensions.
Is this just another wacky step backwards in the world of the Apple OS X Finder, or am I missing a way to avoid this?
PowerMac G5 2.5DP Mac OS X (10.4.3)

This is not how 10.3.x worked, and certainly doesn't make any sense since I am not actually modifying the file.
Actually, I am using "Panther" now, and can confirm that changing the application to be used to open an individual file through "Get Info" does in fact change the modification date.
When the "Change all" button is used, the modification date of other files of that type won't be affected by this change since that modification is presumably made somewhere in the "Launch Services" database to set the "default" application to be used for that file type. Perhaps this is what you were thinking of.
However, for that first file (or any file changed individually), the file is in fact modified, and the "Open with" information is stored with the file, in its "resource fork". Usually, a 'usro' resource (specifying the application) and an 'icns' resource (for the app's custom icon for that file type) are added. You can try this yourself - drag any image from Safari.app to the "Desktop" and open the info window for that image - such images usually don't have a "resource fork". Make note of the file's size, then change the "Open with" application. You should immediately see an increase in the file's size (to account for the addition of the "resource fork") accompanied by an update of the file's modification date to reflect this modification.

SO Delivery date change when item category is modified

Hi expert,
When i change the item category on my SO, the delivery date change.
Can you please give me the configuration, or exit to check how the delivery date is calculated?
Regards.

- Set a breakpoint at function module SD_SCHEDULING
- Change your item category
- This should trigger your breakpoint (if SD_SCHEDULING is changing the delivery date)
- Post screenshot of call stack back here.
Looking at the call stack will give us an idea of why a new scheduling is triggered.
If SD_SCHEDULING is not called, then I assume it must be a user exit causing the issue - check your coding in the SD user exits of include MV45AFZZ.

How to stop automatic date changes when opening an old document?

I use Pages to create my invoices. The problem I'm having is this: when there is a question about an invoice and I need to reopen it the date changes from the original date (which I need) to today's date. I understand why it does this, and I want it to do this when I create the thing, but is there a way to keep it from happening from saved documents?
As a follow up question: it must be very simple to find the date the document was created. Could someone please tell me where to find this?
Thanks in advance

You likely put a date stamp on your invoice via the menu hiearchy, Insert > Date & Time. Highlight the date string, then from a right-mouse button menu, choose Edit Date & Time... You will see another pop-up that gives you some control over your newly inserted Date & Time.

Date changing when dragging/copying photos

Help! I am trying to organize my iPhoto library. I am essentially dragging my photos from my library to a folder or dragging them to an externa hard drive so I can then organize them into a new library. The dates and times are correct in iPhoto. Then, when I drag them into a new folder the dates will completely change. I had an event with 4 photos in it and the correct date for all photos was 4/19/05. When I drag this event to a folder in my pictures file or when I drag the event into dropbox, the date on 2 photos changed to 3/17/11 and the date on the other 2 photos changed to 9/30/09. Does anyone know why this is happening or how I can stop it????

Suggested by a friend, I realize may be controversial... but, I have run out of room on my hard drive and need to dump my photos onto an external hard drive. So, here is what I am doing:
1) I create a folder in my pictures folder in Finder (Home --> Pictures --> New folder) for photos from a particular year (let's say 2008, let's say the folder is named Photos 08)
2) I drag an event/events of pictures taken in 2008 from my main iPhoto library into the folder Photos 08. This is the step in which I see the date change.
3) I switch to a different iPhoto Library (let's say Photos_2008). I have so many photos that my friend and I thought it would be easier to break them down into smaller libraries.
4) I import the photos from the folder Photos 08 into the iPhoto library Photos_2008. When I import the photos into the new library they all come through but they are lumped into one event called Photos 08 and the dates are still wrong. At this step, I have been manually correcting the dates.
5) then, I move the Photos_2008 library onto the external hard drive (actually 2 different external hard drives to be safe)
6) I make sure the photos are there by opening iPhoto from the external hard drive, and then delete (all the while cringing) the events from 2008 that are in my main iPhoto library
Does that make sense? Do you have any better ideas on how to get these onto the external hard drive? I'd like to keep some of the photos and my more recent photos on my computer but need to get the other ones off.
Also, a little background info... in early Sept '12 my system crashed. I also back everything up with Time Machine so they ended up reformatting my hard drive and then I used Time Machine to get everything back on my computer. Since then, my computer has been a mess. Multiple users with the same photos, songs, documents, etc. duplicates, triplicates of photos, documents, songs, etc. on my computer. A real mess.
Thanks for any advice you can offer,
StephPH

Modification dates change when moving/copying between hard-drive and flash

I use a flash drive to store most of my work-related documents on. That way, I have them when I'm at school (on a Windows XP computer) and at home on my Mac OS 10.3.9. I
try to occasionally back-up my flash drive by dragging it's contents to my Mac. Copying in this direction USUALLY retains the appropriate modification date.
However, if I move things from the Mac to the USB drive (I occasionally make changes to a file on the Mac when my flashdrive isn't handy), the modification date changes to the copy/move date. Is there a way around this? It alters the information about the file and sometimes makes a version look newer than another version of a document. When in reality, it’s older--it’s just been moved/copied and the date changed.
I often move things back and forth for backup purposes, but if it keeps changing the dates on it’s own, it’s impossible to tell which is REALLY the
most current copy/version.
Is there a fix so that copying and moving files between volumes does NOT change the modification date of the file?
Powerbook G4--12 in.--1.33 GHz Mac OS X (10.3.9)

Hi, teacher. When my Lexar JumpDrive Secure is formatted as a MS-DOS volume so a PC can read it, the last-mod dates of files that I copy to it are changed to the date and time of copying. When it's formatted as a Mac OS Extended volume, the original last-mod dates are copied to it unchanged. Looks like you can thank Bill Gates for the inconvenience: apparently it's a DOS file system "feature". Don't you wish you could use Windoze all the time?
On second thought, the files really are changed when you write them to a DOS volume, because the DOS file system has no place to store the metadata about your files that a Mac pays attention to and a Windoze box doesn't. So when you write Mac files to a DOS volume, that metadata — which is part of each Mac file — is simply discarded, causing the last-mod date to change.
Message was edited by: eww

When resizing columns in JTable the last columns disappear

I have a problem. I created a JTable and I set the AutoResizeMode to AUTO_RESIZE_NEXT_COLUMN in order for the columns to fill the whole panel. I added the table to a JScrollPane. when I resize the columns, the other columns start to adjust in size to fit the data grid, but it gets to a point where the columns scroll out view. is there a way to stop the other columns from moving when I resize one of the columns. I dont want the horizontal bars to show.

When your mouse pointer is over a movable area, the mouse pointer should turn into a double-arrow. If you notice that after dragging and releasing the mouse, the mouse pointer ''stays'' a double arrow, try positioning the mouse pointer where you want the new boundary and click again. The mouse pointer should change back to a standard pointer.
Does that work?
(This suggestion is based on behavior I've seen with some Infragistics ASP.Net controls in IE8.)

Why table getWidth and setWidth is not working when resize column the table

hi all,
i want to know why the setWidth is not working in the following code,
try to uncomment the code in columnMarginChanged method and run it wont resize the table.
i cont set width(using setWidth) of the other table column using getWidth of the main table column.
and i want to resize the right side columns only (you can check when you resize the any column the left and right side columns also resizing)
any suggestions could be helpful.
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.SwingUtilities;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ListSelectionEvent;
import javax.swing.event.TableColumnModelEvent;
import javax.swing.event.TableColumnModelListener;
import javax.swing.table.TableColumnModel;
public class SynTableResize extends JFrame implements TableColumnModelListener, ActionListener
    JTable table1       = new JTable(5, 5);
    JTable table2       = new JTable(5, 5);
    JTable table3       = new JTable(5, 5);
    JButton btn          = new JButton("refresh");
    JPanel pnlcontainer = new JPanel();
    public SynTableResize()
        setLayout(new BorderLayout());
        pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
        pnlcontainer.add(table1.getTableHeader());
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table2);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table3);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        table1.getColumnModel().addColumnModelListener(this);
        table3.setColumnModel(table1.getColumnModel());
        table2.setColumnModel(table1.getColumnModel());
        table2.getColumnModel().addColumnModelListener(table1);
        table3.getColumnModel().addColumnModelListener(table1);
        btn.addActionListener(this);
        getContentPane().add(pnlcontainer, BorderLayout.CENTER);
        getContentPane().add(btn, BorderLayout.SOUTH);
        setSize(new Dimension(400, 400));
        setVisible(true);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
    public static void main(String[] args)
        new SynTableResize();
    public void columnAdded(TableColumnModelEvent e)
    public void columnMarginChanged(ChangeEvent e)
        TableColumnModel tcm = table1.getColumnModel();
        int columns = tcm.getColumnCount();
        for (int i = 0; i < columns; i++)
            table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
            table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
            // the following commented code wont work.
//            table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
//            table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
//            table2.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
//            table3.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
        SwingUtilities.invokeLater(new Runnable()
            public void run()
                table2.revalidate();
                table3.revalidate();
    public void columnMoved(TableColumnModelEvent e)
    public void columnRemoved(TableColumnModelEvent e)
    public void columnSelectionChanged(ListSelectionEvent e)
    public void actionPerformed(ActionEvent e)
        JTable table = new JTable(5, 5);
        table.setColumnModel(table1.getColumnModel());
        table.getColumnModel().addColumnModelListener(table1);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table);
        pnlcontainer.validate();
        pnlcontainer.repaint();
}thanks
dayananda b v

hi,
thanks for your replay,
yes i know that, you can check the following code it works fine.
actually what i want is, when i resize table column it shold not automaticaly reszie when table resized and i dont want horizontal scroll bar, meaning that all table columns should resize with in the table size(say width 300)
if i make table autoresize off than horizontal scroll bar will appear and the other columns moved and i want scroll to view other columns.
please suggest me some way doing it, i tried with doLayout() no help,
doLayout() method only can be used when table resizes. first off all i want to restrict table resizing with in the limited size
import java.awt.BorderLayout;
import java.awt.Dimension;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.event.ChangeEvent;
import javax.swing.table.TableColumnModel;
public class TempSycnTable extends JFrame
    JTable table1       = new JTable(5, 5);
    MyTable table2       = new MyTable(5, 5);
    MyTable table3       = new MyTable(5, 5);
    JPanel pnlcontainer = new JPanel();
    public TempSycnTable()
        JScrollPane src2 = new JScrollPane(table2);
        JScrollPane src3 = new JScrollPane(table3);
//        table1.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        table2.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        table3.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        src2.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
//        src3.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        table3.setColumnModel(table1.getColumnModel());
        table2.setColumnModel(table1.getColumnModel());
        table2.getColumnModel().addColumnModelListener(table1);
        table3.getColumnModel().addColumnModelListener(table1);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        setLayout(new BorderLayout());
        pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
        pnlcontainer.add(table1.getTableHeader());
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(src2);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(src3);
        getContentPane().add(pnlcontainer, BorderLayout.CENTER);
        setSize(new Dimension(300, 300));
        setVisible(true);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
    public static void main(String[] args)
        new TempSycnTable();
    class MyTable extends JTable
        public MyTable()
            super();
        public MyTable(int numRows, int numColumns)
            super(numRows, numColumns);
        public void columnMarginChanged(ChangeEvent event)
            final TableColumnModel eventModel = table1.getColumnModel();
            final TableColumnModel thisModel = getColumnModel();
            final int columnCount = eventModel.getColumnCount();
            for (int i = 0; i < columnCount; i++)
                thisModel.getColumn(i).setWidth(eventModel.getColumn(i).getWidth());
            repaint();
}thanks
daya

Modified date changes when just opening PM file

We use modified dates frequently at my business. We have lots of things that reoccur only once a year, and we'd like to keep the file dates listed as such in the folder views.
All the sudden, however, Pagemaker files have started updating the modified date to the moment you touch the file, even if you make no changes. If you open it, it now becomes today's date & current time. It's really messing up our method of doing things.
It's not happening with any of our CS4 files, or any Microsoft Office files. Also, it's only happening on files stored on the server. It doesn't happen when we do a test of saving a Pagemaker file locally. The problem is, we don't store anything locally. Everything is stored on the server so everyone can access the file and so it's backed up.
We have a Windows based computer environment but an Apple server with OS 10.3.8 (Tiger--- yeah, I know, old, but it's as far as we can update that server at this time and are looking at getting a new one sometime, but it might be a year or so.)
The "modified date" problem has taken place only in the past 2 weeks. We have not done anything significant for changes or updates for quite a while on either the local computer or server ends. We restarted the server recently just to refresh things, and also added another user to the server and set some permissions for that user in the past 2 weeks.
What could be causing this all of the sudden, and how can it be fixed?

Acrobat 9 makes PDF versions 4.0 and higher. You need a PDF version 5.0 to handle transparencies well. PDF version 4.0 doesn't handle transparency effects well at all.
Pagemaker needs Acrobat 5 to be able to directly export PDF's with custom job settings. It only generates a PDF version 4.0, but works for our needs in Pagemaker.
I choose to keep both Distiller versions to make our work easier. When you have 20 ads open in Pagemaker, and you send the first one as a postscript through the print window, it sets up the "File, Export" in Pagemaker to use the correct PDF job setting, and then you can just do "File, Export to PDF" for the next 19 ads and it makes perfect PDF's. Works slick instead of having to make postscripts of all 20 ads first and then run them through Distiller. If you only have Distiller 9 installed, it doesn't let you select any custom job settings from your Distiller. Crazy, I know, but that's what I've figured out we have to do to get it to work. Have to have Distiller 5.0 to control PDF settings in Pagemaker and still be able to export from the file menu directly to PDF.
Distiller 9 is used for all other more advanced design pieces created in InDesign or Photoshop that are saved as a postscript first and PDF's are made the long way in those cases (running postscript through Distiller 9 at the end).

Automatically update Data Flow when table column is added

Hi, I have identical SQL Server databases on Server A and Server B, and I'm trying to create an SSIS package that will update its own Data Flow task when I've added a new column.
When I open the SSIS package up in Data Tools after adding the column, I get the following warning: 'The external columns for OLE DB Destination are out of synchronization with the data source columns. The column "TestColumn" needs to be added to
the external columns.' So the package know when it's out of sync with the db.
Is there a way to automatically update the external columns?
Thank you!

There is a Dynamic DTS task commercial product of CozyRock
Another possibility is to generate an updated version of the package programmatically either with BIML http://www.mssqltips.com/sqlservertip/3124/generate-multiple-ssis-packages-using-biml-and-metadata/
or via .net code http://msdn.microsoft.com/en-ca/library/ms345167.aspx
Arthur
MyBlog
Twitter

Mouse loses control when resizing columns in TFS

I work actively on Team Foundation Server and always noticed that when I click the mouse to drag or re-size a column in a table inside a work item, it does not work. The column keeps getting re-sized even after releasing the mouse. When i move the mouse to a different part of the screen also, the column keeps getting dragged. This is very annoying. This does not happen on other browsers. So I am assuming, its not a TFS problem.

When your mouse pointer is over a movable area, the mouse pointer should turn into a double-arrow. If you notice that after dragging and releasing the mouse, the mouse pointer ''stays'' a double arrow, try positioning the mouse pointer where you want the new boundary and click again. The mouse pointer should change back to a standard pointer.
Does that work?
(This suggestion is based on behavior I've seen with some Infragistics ASP.Net controls in IE8.)

Original video file date changes when imported

When I import video files, the date of the original source file gets changed to the date of my importing it.
Premiere Pro CS4 never did that. Why is CS5.5 changing the date of the source file ??
steve

Hi Todd, --
I think you are saying my 'write xmp id to files on import' must be turned ON somehow. I did not do that, so if it is turned ON, it must be ON by default ?
It was both 'date created' AND 'date modified' that were being changed to the date of import.
Ok, I found that. It is turned ON by default, I turned it OFF. I also turned OFF the next one too - 'enable clip and xmp metadata linking'.
I just did a test import, and the 'date modified' of the video files on the hard drive has not changed. Thank you. VERY MUCH.
But, I have other problems too, with PP, and video file dates.
There's a 'date created' and a 'date modified' for video files. Plus, with Windows 7, there's a few more dates - 'date of content' etc.
My original untouched video file dates do not make any sense. 'Date Modified' is showing the date the video files were recorded. 'Date Created' is showing the date I copied the video files from the camera stick to the hard drive.
That makes no sense. They should be the reverse.
Why why why after 30 some odd years have the computer engineers NEVER made video files dates the same as digital photo files, with 'Date Taken'.
Also,
I have multiple cameras. For each event or trip or whatever I often take several 1,000 photos and videos. It's an absolute necessity to be able to mass import chronologically. The only way I can integrate / import them all in chronological order is by Date originally Taken, and then immediately drag all the files to the timeline while they are still all collectively highlighted in the order I just imported them all by date.
PP only allows for imports by 'date taken' for photos and 'date modified' for video files. And, if I don't immediately drag the imported files to the timeline while they are all still highlighted without doing anything else first, the bin window re-arranges them all by filename, and there is no way to later re-arrange them by dates.
This is extremely aggravating and impossible to work with for my need to import then later work with multiple-source recorded files chronologically.
All these 'date' problems for video files really totally screws that.
steve

No data found when adding column link to classic report

Hi,
Oracle 11g r2, APEX 4.1.1.00.23.
I have some classic reports.
I go to Report Attributes, then I click Add Column Link in the "Tasks" right menu, it adds me a column link, I just add some text for the link and a page to go to.
Then I run the report and I get :
report error:
ORA-01403: no data foundTested with several classic reports on multiple pages.
Debug mode shows me :
0.43816     0.00240     ...Execute Statement: select distinct [...] order by 3,11 ,4
0.44056     0.00162     print column headings
0.44218     0.04816     rows loop: 25 row(s)
0.49037     0.00141     report error: ORA-01403: aucune donnée trouvée
0.49175     0.00078     Computation point: After Box BodyWhen I run the query in my favorite tool, I get expected results.
Did I missed something ?
Thank you.
Yann.

Yann39 wrote:
<font size="4">Is it an APEX bug ?</font>
- Create a new Region of type Classic Report, then set Region source as :
begin
return test_return_query;
end;- Run the page, the report works as expected
- Go to Report Attributes and click Add Column Link (and just specify a text for the link and a page to go to).
- Run the page, you should get the error !This might be unorthodox but try wrapping your returned query within an SQL statement, like so:
   begin
      return 'SELECT t.* FROM ('||test_return_query||') t';
   end;
I can reproduce it on oracle.apex.com if needed...If my suggestion doesn't work, I think this might be the only option. You could create a new forum posting with the word "BUG" in the title, along with a link to this thread and the relevant workspace details (with guest developer credentials).

Posting date changes when I approved a Funds reservation

Hello experts,
When I approved a Fund reservation in SAP business workplace, system creates a Accounting document with a different posting date.
I give you an example:
Funds reservation:
Document number: 1101000099
Document type: R0
Document date: 01.08.2011 (day.month.year)
Posting date: 04.08.2011 (day.month.year)
Accounting document
Document number: 1000000916
Fiscal year: 2011
Period: 08
Doc. Date: 01.08.2011 (day.month.year)
Posting date: 29.08.2011 <<<----
?¿?¿?¿? Why sy-datum ??
Maybe a SAP error ?? Do you know where SAP (abap code) determine posting date??
I need posting date of accounting document is equal to posting date of funds reservation.
Note: If I created a funds reservation with posting date 31.12.2011 and then I approve it, system creates accounting document with posting date correct! (31.12.2011)
A lot of thanks in advance.
Best regards,
djlu.
Edited by: djlu on Aug 30, 2011 12:27 PM
Edited by: djlu on Aug 30, 2011 12:45 PM
Edited by: djlu on Aug 30, 2011 12:49 PM

Hello gautam maini,
First of all a lot of thanks for your quick answer.
My BO is ZFMRE a custom objecto of FMRE.
Methods: I don't know which method exactly but I think zfmre.Approve_1 or zfmre.Approve (standard methods)
Workflow: WS90200003 / WS99800014
SAP Version: SAP ECC 6.0
Sorry but I am not a workflow expert.
Please give me your suggestions.
Thank you in advance.
Best regards.
djlu.

Quirky date changes when resizing columns

Similar Messages

Maybe you are looking for