Quisiera saber si hay un programa en labview que sea similar a un osciloscopio

Me encuentro realizando adquisicion de datos con una DAQ SCB 68, estos datos van a ser provenientes desde un rayo laser pero quisiera saber si puedo o ya existe un programa EN LABVIEW que sea un osciloscopio donde pueda visualizar la potencia principalmente.
gracias

rosiiee wrote:
Me encuentro realizando adquisicion de datos con una DAQ SCB 68, estos datos van a ser provenientes desde un rayo laser pero quisiera saber si puedo o ya existe un programa EN LABVIEW que sea un osciloscopio donde pueda visualizar la potencia principalmente.
gracias
Spanish is a bit rusty but I hate translators online because often they confuse things so...
Translation
Subject " I would like to know if there is a program in labview that is similar to an oscilloscope"
Body
"I am acquiring data with a DAQ SCB 68 (note this is not the instrument just the breakout but I believe it's irrelevant to what is being asked), this data is going to be coming from a laster but i want to know if i can, or if there is an existing program in LabVIEW that would act as oscilloscope where one can visualize the principal power (not sure of direct translation, technical term)
CLA, LabVIEW Versions 2010-2013

Similar Messages

Necesito saber si hay un complemento deltipo boton que pueda ocultar la barra de marcadores

lo que ocurre es que es demasiado el espacio ocupado por las barras y necesito saber si hay un complemento del tipo boton para oculta las barras

Maybe use the Bookmarks Menu button instead.<br />
That button shows on the Navigation Toolbar if the Bookmarks Toolbar and the Menu bar are hidden.
* View > Toolbars > [] Navigation Toolbar and [] Menu Bar
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.
There is also a toolbar button to open the Bookmarks Sidebar in the Customize window.
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

Mi ipod touche fue robado, quisiera saber si hay algo por hacer como lo encuentro

buenas noches mi nombre es andrea Riaño vivo en Colombia, el dia de hoy se perdio mi ipod touche lo tengo registrado.. deseo encontrarlo quiisera saber si puede ser posible.. gracias

Google translate:
as I can discover my ipod touch 4g this was stolen, he was restored and I can not locate for iCloud, I have the box and serial number, plus, I can know which accounts are linked to my ipod (without any)? I can locate it if I call apple?
If the iPod has been restored it will never show up in iCloud.com
The serial number will only help idenentify the iPod as yours if it is recovered.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product

Hola! quisiera saber si hay alguna forma de arreglar mi iphone 4?

se mojó en una piscina, lo dejé unos dias en arroz, cuando lo destapé la bateria estaba inflada, se cambio la batería pero no prende

You can't prevent users from clearing the history.<br />
There are a lot of ways to do that in Firefox ([[Clear Recent History]]) and it is always a possibility to remove files directly from disk.
You need to install special software on your computer if you want a record of visited websites.<br />
Some firewalls and routers have that feature.
* Wireshark: http://www.wireshark.org/download.html
* Wireshark - Wikipedia: http://en.wikipedia.org/wiki/Wireshark

Hola quisiera saber porque lifa no reconoce arduino

Hola amigos de NI
Quisiera saber porque luego de haber instalado labview 2011 ok, tengo windows xp, he instalado driver de arduino.
he instalado jki vi pachage manager, pero al abrir el lifa me dice error que no recocnoce los driwer de arduino.?
Que esta pasando, ayudeme por favor.
Ya he hido a NI LIFA, lo he intentado pero nada.Para mas detalle le envio la image que sale
Agradecido por su respuesta
Attachments:
image001.png ‏342 KB

Hola Jimmyto.
El error que te aparece dice que no se pudo comunicar con LabVIEW. Esto te apareció al instalar LIFA? Si este es el error que te aparece esta relacionado con las configuraciones del VI Server en LabVIEW. Esto lo puedes arreglar con esta liga de JKI.
http://support.jki.net/entries/21447601-Resolving-issues-with-VIPM-connecting-to-LabVIEW
Saludos.
Aldo H
Ingenieria de Aplicaciones

How can we call a C program in Labview

Hi
a) In one of our application we have to call a C progran in Labview. I am not able to call it. Can somebody help me.
b) When we call a C program ,is Labview makes block diagram for it.
Please reply
Thanking You

hi there
well, then we need more information what you mean with a "C program". are you talking about C source code, a command line executable, a high end executable with a GUI, a dll, ActiveX.... what are the parameters you have to pass? what parameters are returned from the "C program"? please post some code....
as a startup you could search the examples shipped with LV. open the example finder from the runtime menu.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

I want to write a program in LabView then pass the test results to teststand to check if it pass or fail without displaying the test stand program,

I want to write a program in LabView and create an execute but I want to be able to pass test results to test stand to find it the unit pass ar fail the test then save the data to a database. How would i go about it.

What's confusing is your statement that you want to do this "without display the test stand program". You can minimize the TestStand UI to the task bar but if you don't want TestStand to be running, how can TestStand evaluate the result. Explain a little more please.
In the message body of your post, you just say you want to create a LabVIEW exe and pass the results to TestStand. What I would recomend is that instead of an exe, you create a dll and use TestStand's DLL adapter to call it and return the results. TestStand will evaluate it and do the logging.

I want to send 10 bit ADC from PIC via serial communicaton. i send it separetly 8 bit first then the other 2 bit. how to program in labview to capture those two packet then combine it togother

i want to send 10 bit ADC from PIC mCu via serial communicaton.
i send it separetly 8 bit first then the other 2 bit (2 bit --> with zero at 6 bit from LSB).
how to program in labview to capture those two packet and then combine it together
so i have 10 bit in lab view
thank you

Close, but now quite. You need to specify to the VISA Read how many bytes to read, not how many bits. Thus, the input would be 2, not 16. It's also not clear why you're trying to use the "String to Byte Array". The Type Cast will give you a number based on what data type you wired. You're basically telling it how to interpret the string. In this case we're telling it to interpret the string a 16-bit value, so we'll get a 16-bit integer. I know you said you wanted a 10-bit, but you can't have that. You'll get a 16-bit with 6 bits set to zero. Note: I did not completely understand what you said so we may need to change this slightly, but we want to get the communication and reading collection working first.
Also, since you seem to be setting this in a loop you probably want to monitor this or to collect the data. For that you need a shift register. See attached for a modified version of your attempt. You need to set the datatype to I16 or U16 based on whether the value you get from the PIC is signed or unsigned.
Message Edited by smercurio_fc on 05-01-2007 02:28 PM
Attachments:
Read PIC.vi ‏21 KB
Read PIC.png ‏7 KB

How To create a Buffer Application Program in LabVIEW?

Dear all:
Can someone advise me on how to implement a buffer application for LabVIEW.
Basically I have 2 application programs than run continously in paralell.
1) LabVIEW Data Logging & Plotting Program. It takes 90 ms to excute its code
2) C++ Data Acquisition Program. It Samples the data from a Reflective Memory Card (on the PCI bus of my PC)
at 1ms and creates a Buffer where it store one sample per channel every 1 ms.
I know LabVIEW have the Code Interface Node to call a C program but since both (The LabVIEW and the C) are runing (one slower than the other) in Parallel I need to somehow interrupt the C program from LabVIEW and get from it the data that it as collected so far.
Any suggestio
n will be highly appreciated. I attach txt file with a little more description of the problem.
Thank You very much.
Felix Beltran
ALSTOM Power Conversion.
U.K
Attachments:
NI_SW_Buffer_Question1.txt ‏2 KB

Hi Felix,
The best architecture for this application would be to have the C++ program divided into two threads. One thread is continuously acquiring data and placing it in a queue. The other "handling" thread will read data from the queue and serve it up to your LabVIEW application.
Much better than using the Code Interface Node, build the C++ application into a DLL. You can then call a function from your LabVIEW program to start the acquisition, and then calls to the handling thread function will return data to LabVIEW.
I hope this helps.
Regards,
Phil R
Applications Engineer
National Instruments
http://www.ni.com/support

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Can not open 7.1 program in labview 8.5.1 -- handler error

I made a program in labview 7.1
And I wanted to open it in labview 8.5.1, but it opens with errors, and I can not run it.
In every sub vi, till the lowest level, I got the error "handler error".
Can somebody help me?

Hi Sven,
Due to data dependencies within the *.LLB your 8.5.1 version of your vi was still opening the 7.1-version of the 'General error handler.vi'. Because these two version are no longer identical, LabVIEW concluded that the wiring you made was no longer correct.
Replacing the 'General error handler.vi' under the data dependencies with the one at: C:\Program Files\National Instruments\LabVIEW xxxx\vi.lib\Utility\error.llb
should resolve the problem as we discussed on the phone.
Kind Regards,
Wouter
NI Applications Engineering
Northern Region

How to use a Matlab Program within Labview

Hi
I saw in this forum that many users are using some matlab program
executed in Labview program. I have actually Labview 7.1 and would like
to use some of my matlab program in Labview. Is there an easy way to do
it ?
Thanks
Thomas

The MATLAB Script function is kinda buried in the function palette, and
can be found under Functions >> Analyze >> Mathematics
>> Formula. Unfortunately this feature is not available in
the LabVIEW Base package. Hope this helps!
Andy F.
National Instruments

How to call a python program in labview 7?

Hi
I want to call a Vtk python program in labview .Is it possible to open the program in the same front pannel of the labview program.
Thanking you
Shri

HI
Thanks for the thread, but I am using the Python script that mainly has VTK and output for my program is a 3D model presented in vtk window. The thread provides examples that mainly pass strings.
Now I would like to know if it is possible to open this vtk window in labview or even as a separate floating window (since the window gets closed after the python program is finished)
Thanking you
Shri

How to call another program from LabVIEW?

Hi!
Is there anyone that can answer my question? I have found a similar thread where the user needed to call labVIEW from some program but I want to do the opposite.
I made a program in labVIEW that communicates via COM-ports (serial communication) with the processor I use at the job (Ubicom´s IP2022).
Now I want to add more funcionality to this program. I want to be able to program re-program IP2022 through this LabVIEW application.
The programming is done via an Ethernet-dongle. I start a program called IP2kProg, I write the ip-address of the dongle and the program-file (.elf) downloads at this address. But how can I do this from
LabVIEW, do I need to open IP2kProg or can I send some values to it via LabViEW?
Ant suggestions?
Thanks, Amir

Amir,
There are couple of options:
1. If your IP2kProg program has a command-line interface, you can use LabVIEW's System Exec.vi and send the commands and parameters to it.
2. If the IP2kProg has an API / exported functions, you can call them from LabVIEW using the Call Library Function Node.
Hope this gives you some ideas.
-Khalid

How can I write program in Labview for zbrain kit..??

Hello everybody
I need to write the program in Labview fro Zbrain kit. I need to write code for multiple analog input (through multiple channels) that results multiple digital output. I found one refrence code which has one analog input (one channel) and gives one digital output.
I also need to save data for channels. I have no idea how can I save data for channels.
I have attached here the base program. Please give me idea how can I understand this program so that I can complete following tasks:
1. Save data for one channel and later for multiple channels
2. Modify the number of channels from one channels to multiple channels.
Actually I have gone through the videos and text based content(basics in labview) but I am unable to write the code.
Attachments:
Analog_3_InBlock.vi ‏131 KB

Hi,
Attached is an example snipped with some more comments on how to acquire multiple channels on a ZBrain platform that is based on an Analog Devices Blackfin processor. Just drag and drop it into your LabVIEW diagram. More examples can be found here: http://wiki.schmid-engineering.ch/zsystem/doku.php?id=example_zmc_adc-dma_continous. The idea behind dynamic data acquisition on a microprocessor is simple: you define the channels (up to 6x) , sampling frequency (up to 250kHz) and block sizes (up to 65'000) and start the acquisition. The underlying driver model samples in the data in parallel and the LabVIEW program gets this data. While e.g. processing the data, the underlying driver model continues sampling new data.
I hope this helped.
Marco Schmid
Schmid Engineering
Attachments:
snippet_zmc_adc-dma_continuous.png ‏107 KB

Quisiera saber si hay un programa en labview que sea similar a un osciloscopio

Similar Messages

Maybe you are looking for