Quite urgent guide problem

Hi all,
I'm trying to create guides which snap to the ruler divisions (which is set to pixels) for a website layout.
For some reason holding shift has no effect on making the guide snap to the increments (in this case pixels)
I'm able to place a couple of guides accurately using view/new guide but I'd like to know why it's not working.
Any ideas?
Thanks

Thanks JJ, yep that was how I got going until I realized I must have hit ctrl+shift : instead of ctrl+: at some point, I didn't realize you needed snap enabled for guides as well.

Similar Messages

URGENT BIG PROBLEM:during import track st. in queue simply does not disap

I have problem when importing transport request on production(the transport domain controler is on development system) . The track status in queue simply does not disappear.
I tried(based on what I have seen on an other thread) to delete the transport in import monitor and tp on OS level on productive and development system
Then I deleted entries in TRBAT&TRJOB tables. The TPSTAT is empty.
The problem persists.
What would you suggest . The go live depends on this problem

Hi,
/usr/sap/trans/buffer might still contain entries, be careful do not modify anything here.
Check the link
http://help.sap.com/saphelp_47x200/helpdata/en/3d/ad5b5a4ebc11d182bf0000e829fbfe/frameset.htm
Check the 'Cleaning up the transport directory' and 'Synchronizing the Buffers' links within the above link.
Please do not use subjects like : URGENT BIG PROBLEM.. it is against the rules of this forum.
Regards,
Siddhesh

Quite urgent Ken Burns effect problem

I am working on a documentary (due tomorrow afternoon). This is a fulll length piece and has hundreds of photographs in it. The trouble is; all the photographs when they where imported automatically got the Ken Burns effect... I want to de-effect them. So I got to Media--Show photo settings and de-select the Ken Burns effect.
One some photographs, it works fine. But on others, I click on Show photo settings and it simply turns the screen to black, even if I select the photograph again.
This is a bit distressing as all the photographs have intense Ken Burns effect which cannot be for the final product. If I should be more detailed about what I am trying to say, please tell me. It actually is pretty urgent that I figure this out.
Thank you very much.

Have you emptied iMovie's trash? If so, you may experience a 'bug' in iMovie that will not allow you to change the settings of a clip that was imported with the KB effect. That is why you see the black screen. iMovie can no longer access the original photo's clip because it sent it to the trash. This is not a problem so long as you do not empty the trash. But, once emptied, the only way to fix it is to reimport the photo.
Here is a link to more discussion about it: http://discussions.apple.com/thread.jspa?messageID=4289801&#4289801
and this link describes a better fix in case you are worried that you will inadvertently empty the trash:
http://discussions.apple.com/thread.jspa?messageID=1912675&#1912675
Hope this helps in time!

Very Urgent Tab Problem

Hi to All...
I Designed the PDF forms using Adobe Acrobat Live Cycle Designer 7.0.
but i am facing tab problem.
for example: if i entered in the some text boxes then if i want to go back to previous text boxex means curser will go to the some other text boxes.
and also if open in internet Explorer tab issue is more.
is there any property we need to set?
please guide me its very urgent.
thanks in Advance...
chalmal Seetaram

To set the Tab order choose: 'Tab Order' under 'View' menu and read through the Tips.... it is easy.
Good Luck,
SekharN

URGENT - Noise problem in color render

Color makes a lot of noise in every shot I import and it's worse when I export them.
I have already re-installed Final Cut Studio and Color 1.0 but nothing changed.
It's very urgent can you please help me !
Message was edited by: cogitobule

Honestly, I've yet to encounter any sort of silliness with Color 1.0.1 like have been reported around the net. At the same time, I've also not done much heavy lifting with it either and I've been quite careful in my sequence preparation when sending from FCP.
Reconforming has worked, roundtripping has worked, no noise or crashing issues. I do, however, have the color variance problems.
OSX 10.4.10,
Color 1.0.1
QT 7.1.6
Scott, I think you're on to something with the QT version. QT 7.2 has been such a disaster all around I never updated it.
One more thing, Pro App Support update 4.0.1 broke some things in Motion 3. The latest update solved those. I didn't notice any silliness with Color in either of those versions.
Zeb

Very urgent: regarding problem in display of output

hi,
i am modifying a report in which i have to display the stock date wise, i.e. it will display that the at this date this amount of stock is there.
currently the code is able to display the according to this criteria that if date is <= 15 then it will display the stock of previous month and if it is >= 16 then it will display the stcok of last date of current month.
but i want to display the data in way that it will read the rest of the records from the other itab ITMSEG.
should i display the code of it? that it will display more clear picture.
Edited by: ric .s on Mar 31, 2008 8:23 AM

hi,
dis is d 1st part which do the segregation of date:-
parameters: p_date LIKE ZSTOCKSUM-STLDATE default sy-datum.
data: num type i,
     w_date type d.
aa = p_date.
num = p_date+6(2).
if num <= 15.
p_date+6(2) = 01.
w_date = p_date - 1.
elseif num => 16.
p_date = p_date + 30.
p_date+6(2) = 01.
w_date = p_date - 1.
endif.
And it the part where it have to fetch the records:-
SELECT ASTLDATE AMATNR AWERKS ALGORT ASTDEBIT ASTCREDIT
BMEINS BMTART BMATKL BNTGEW B~GEWEI
FROM ZSTOCKSUM AS A
INNER JOIN MARA AS B ON AMATNR = BMATNR
INTO TABLE STIT
WHERE AWERKS = P_WERKS AND MTART IN MAT_TYPE AND AMATNR IN P_MATNR AND STLDATE <= P_DATE
AND ( MTART = 'FERT' OR MTART = 'HALB' OR MTART = 'ZBOP' OR MTART = 'ZSCR' OR MTART = 'ROH' )
AND A~LGORT IN P_STLOC.
SELECT BBUDAT AMATNR AWERKS ALGORT AMENGE AMENGE
CMEINS CMTART CMATKL CNTGEW C~GEWEI
FROM MSEG AS A INNER JOIN MKPF AS B ON AMBLNR = BMBLNR AND AMJAHR = BMJAHR
INNER JOIN MARA AS C ON AMATNR = CMATNR
INTO TABLE ITMSEG WHERE AWERKS = P_WERKS AND MTART IN MAT_TYPE AND AMATNR IN P_MATNR AND BUDAT <= P_DATE AND BUDAT => aa
AND ( MTART = 'FERT' OR MTART = 'HALB' OR MTART = 'ZBOP' OR MTART = 'ZSCR' OR MTART = 'ROH' )
AND A~LGORT IN P_STLOC.
SORT ITMSEG BY MATNR WERKS LGORT MEINS MTART MATKL NTGEW GEWEI.
DELETE ADJACENT DUPLICATES FROM ITMSEG COMPARING MATNR WERKS LGORT MEINS MTART MATKL NTGEW GEWEI NTGEW.
INSERT LINES OF ITMSEG INTO TABLE STIT.
    ITAB[] = STIT[].
    SORT ITAB BY MATNR WERKS LGORT MEINS MTART MATKL NTGEW GEWEI NTGEW.
    DELETE ADJACENT DUPLICATES FROM ITAB COMPARING MATNR WERKS LGORT MEINS MTART MATKL NTGEW GEWEI NTGEW.
SORT STIT BY MATNR LGORT.
SORT ITAB BY MATNR LGORT.
LOOP AT ITAB.
    V_QTY = 0.
LOOP AT STIT WHERE MATNR = ITAB-MATNR AND LGORT = ITAB-LGORT.
if num <= 15.
    V_QTY = V_QTY + STIT-STDEBIT - STIT-STCREDIT + ITMSEG-MENGE.
*IF AA >= 16.
else.
    V_QTY = V_QTY + STIT-STDEBIT - STIT-STCREDIT - ITMSEG-MENGE.
endif.
ENDLOOP.
this is the code where i think the problem is as it is able to display the data in debug mode but when it comes to actual report execution it is not displaying it i.e. if the stcok of material is changed on today's date it is showing but when i want to see the stock of previous date it is still showing the same. plzz help me out it is really urgent.
Edited by: ric .s on Mar 31, 2008 11:06 AM

Itunes won't open and i am getting this error message: the application itunes quit unexpectedly. the problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in

I have been unable to publish my website due to this message "iweb quit unexpectedly - the problem may have been caused by FTP plug-in" - Iweb seems to register all pages, then crashes before publishing.Tried quite few thread trouble shoots, no luck.Help?

I have mac book pro 10.5 Leopard
Have just started using iweb and have small site of about 5 pages, plus blog. I have yet been able to publish, each time I try iweb crashes and receive following note -
The application iweb quite unexpectedly. The problem may have been caused by the FTPKit Plug-in.
I have tried a few troubleshooting methods recomended on other threads, ie. deleting caches, copying domain and reboots... but no luck.
Any help very much appreciated.

Reinstall iWeb from the source you got it from originallhy. Or, if you're running iWeb 3 download and apply or reapply the iWeb 3.0.4 updater. It included that plugin.
OT

Urgent: Middleware problem: Load from R/3 to CRM

Hi,
This is with regards to a CRM installation that we have at our office. I have followed all the Best practices steps for establishing connectivity and to activate replication between the backend R/3 and the CRM system.
However, I am facing the following issues:
1) When trying to replicate Customizing Objects from R/3 OLTP to CRM System, the execution remains on "Running" status forever. The only option remains to abort the execution.
2) On running the transaction SMOHQUEUE, I am facing the following error message: "Error during aRFC (SAPCRM_MW_RR_000:Name or password is incorrect. Please re-enter)". Best practices suggests creation of a RFCUSER in client 000. This I have done.
3) Finally, in the Best practices document, C71, if you kindly refer to page 19 till the end of the section, it has been mentioned that at the time of creating RFC destinations for R/3 and the logical destinations, the logon credentials is that of RFCUSER for all. However, creation of this user is only for client 000. I am trying to understand whether RFCUSER needs to be created in R/3 as well as the application client.
I would request your expert advice as this is very urgent and assure that points will be awarded.
Thanks
Souvik

I have found a propoer articulation of my problem in SAP note 429423. It goes as follows:
<i>"No entry exists in one of the queues, but the status in R3AM1 remains 'Running':
In this case, probably no reply is sent to the CRM Server after the data selection in the source system.If this is the case for an adapter object but not for others, contact the respective application component which can analyze why the source system does not send a reply and correct it.
If this system response occurs for all adapter objects, create a message for component CRM-MW-ADP."</i>
However, I am unable to act on the above. Kindly suggest what exactly needs to be done as suggested in the note.

Urgent facing problem when starting the weblogic admin serverof soa11.1.1.3

install the soa 11.1.1.3 trying to start the admin server of weblogic getting the below exception plz help me its urgent.
####<Jun 9, 2010 10:31:55 AM IST> <Critical> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276059715500> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.
weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1394)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsRuntimeException: JPS-01538: The default policy provider was not found.
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:273)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsException: JPS-01538: The default policy provider was not found.
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:705)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsException: JPS-01514: The default context is missing in jps-config.xml.
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:665)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
     at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:177)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:218)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:140)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:127)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:115)
     at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:53)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:133)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:128)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:656)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

using orapki you should be able to see the contents of the wallet without a password. try using this:
ORACLE_WM_HOME/oracle_common/bin/orapki wallet display -wallet ORACLE_WM_HOME/user_projects/domains/EPMSystem/config/fmwconfig
Should result in the following
Oracle PKI Tool : Version 11.1.1.2.0
Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
Requested Certificates:
User Certificates:
Trusted Certificates:
Subject: OU=Class 1 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Secure Server Certification Authority,O=RSA Data Security\, Inc.,C=US
Subject: CN=Entrust.net Secure Server Certification Authority,OU=(c) 1999 Entrust.net Limited,OU=www.entrust.net/CPS incorp. by ref. (limits liab.),O=Entrust.net,C=US
Subject: CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions\, Inc.,O=GTE Corporation,C=US
Subject: OU=Class 3 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: CN=Entrust.net Secure Server Certification Authority,OU=(c) 2000 Entrust.net Limited,OU=www.entrust.net/SSL_CPS incorp. by ref. (limits liab.),O=Entrust.net
Subject: OU=Class 2 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: CN=Entrust.net Certification Authority (2048),OU=(c) 1999 Entrust.net Limited,OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.),O=Entrust.net
If it prompts you for a password then that's your issue...

Urgent: Sessions problem pls help me

Hi all,
Its already late to post this problem.pls help me urgently.
I have a servlet & two jsp's. first i request servlet, it processes something and forwards request to my first jsp. In that jsp on a button click, i'm displaying a new popup by calling showModalDialog. this dialog gets data from the same servlet but it forwards to my second jsp.(second jsp can be seen in dialog)
Now if i submit form from my second(dialog) jsp, the servlet reports that session has expired. I tried a lot but invain. any one who helps me is appreciated well by all of our forum.
waiting 4 u r reply,

It could be that you have cookies turned off and you're not using URL Rewriting.
In J2EE, the first time your browser makes a request to the server, the server responds and appends a SESSION_ID parameter to the request as well as storing a cookie with the SESSION_ID.
The second time your browser makes a request, the server checks for the cookie. If it doesn't exist it checks for the parameter. If neither exist the server assumes its the first time your browser has made a request and behaves as describe in the previous paragraph.
In your case when you submit the form if you have disabled cookies and the action attribute doesn't have the SESSION_ID paramter appended to the url, the browser will assume it's a first request. The user will not be logged in, hence your session has expired error.
To fix this you need to encode the URL in your JSP. You can use the struts html:rewrite tag or the HttpServletReponse.encodeURL method, or if you're using JSP 2.0 the JSTL c:url tag.

Help Urgent -- Mapping Problem.

Hi All,
IDOC to File.
I got a problem while doing Mapping. I have 7 segments.
Idoc structure looks like below:
Seg1
Seg2
Seg3
Seg4
|____Seg5
|____Seg6
Seg7
Now i need to do Mapping for Seg 5 and Seg 6 to single Segment( BLOBE ) and these segments will repeat unbounded times.
Seg5
> BLOBE
Seg6
When i test this scenario.. iam getting Blobe only once and its is not repeating,
when seg5 and seg6 repeats more than once.
Please suggest me what might be the problem.
Can i acheive this or not?
Its Urgent.
Thanks in Advance.
Regards
Seema.

Hi Raj,
Seg5 and Seg6 are under Seg4 of my source idoc.iam concanating all the fields in seg5 and seg6 and mapping into <b>Single string</b> "BLOBE" which is at the target side
Source                                     Target
Seg4                                          Seg4
_____seg5 (1:unbounded)
|_____seg6 (1:unbounded)               |___BLOBE(1:unbounded)
Pls reply me if u need any clarification.
Regards
Seema.

Cannot "force quit" Maybe keychain problem?

It is becoming more than usual that an application freezes(safari for ex.)and when I try to force quit it cannot gather the system informations, After it cannot submit to apple the report. had the communication error code -600. Ultimately I did performed some changes at the keychain after I could not enter my administrator password. I wonder if that is the problem. Could anyone tell me how a normal keychain should look like I have a login, one with my name,one for the system and one for the system roots. All locked. Any other idea what could be the problem?
Thank you

lozee,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Are you now able to use the About This Mac, Restart…, or Shut Down… selections?

Epub 3 fixed layout – "guide" problem

Hello, where is problem when I am trying to upload fixed-layout book via iTunes Producer and I get error:
      "ERROR ITMS-5107: "Fixed-layout books must supply a guide." at Book (MZItmspBookPackage)".
The guide in OPF file is on right place and well formatted.
See:
<guide>
   <reference href="Text/page1.xhtml" title="Cover" type="cover" />
   <reference href="Text/page1.xhtml" title="Story start" type="text" />
</guide>
In iBookstoreAssetGuide 5.0 is no information about another guide.
Thank for any advice
P. S.: Google didn't find anything

Hi fazeelaabuzohra
EPUB 2:
     OPF file:
<guide>
          <reference type="text" href="Text/page1.xhtml"/>
</guide>
or EPUB 3:
     OPF file:
<manifest>
<item href="nav.xhtml" properties="nav" id="toc" media-type="application/xhtml+xml"/>
     nav.xhtml
<?xml version='1.0' encoding='UTF-8'?>
<html xmlns:epub="http://www.idpf.org/2007/ops" xmlns="http://www.w3.org/1999/xhtml">
<head>
    <title></title>
</head>
<body>
    <nav epub:type="landmarks">
      <ol>
        <li>
          <a epub:type="bodymatter" href="page1.xhtml">bodymatter</a>
        </li>
      </ol>
    </nav>
</body>
</html>
You must set the version in OPF:
EPUB 3:
<package ... version="3.0" ... >
EPUB 2:
<package ... version="2.0" ... >
I hope you will understand now

****Standard Set Top Box/Menu Guide Problem****

I have a question concerning the interactive guide for a standard receiver. (Keep this in mind: I have my own DVD recorder and like to record three different shows daily while at work on three different channels with one at 8am, one at 11am. and the other at 1pm. during the day while I am at work). II I know you have reminders as an option but as I understand it, if I am not home to OK that reminder when it pops up, it will not switch to that channel. SO...does the interactive menu on your standard receiver have a function where I can set it up to switch to those three channels/programs everyday while I am away? In other words have an auto-tune? Does the standard receiver have the DVR tab in it's menu on there too and because I don't have a DVR it would just switch to that channel for me (and have options too like start 4 minutes early and end 5 minutes late from scheduled time) like I want and simply not have any DVR device to record to? My cable company has exactly that. The guide thinks it recording to a DVR device when in fact it is n't and gets the job done by switching the channel for me so my own personal DVD recorder gets the correct shows recorded. Please let me know back on this as its very important for me to know. Thanks!

I think the answer to all of your questions is no.
Only way I have heard to do what you want is to have a DVR that can control the STB. Usually done by adding an IR dongle that you put in front of the STB. DVR sneds a signle out and changes the chanel on the STB for you. Just have to remember to leave the STB turned on.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Quite urgent guide problem

Similar Messages

Maybe you are looking for