Quiz Feedback Options in Captivate

Hi all,
I have a problem in showing the feedbacks for a quiz(Multiple choice with multiple answers(Eg: Answer - A and C). I wanted to show feedbacks for each wrong attempt made by the user, until the user select the correct answer. I mean I have to show multiple incorrect feedbacks for all the multiple wrong attempts made by the user. Is this possible? If yes, please guide me through.
Thanks in Advance.
Warm Regards,
Mathi.

That is not something to be explained in a few words. I have no idea about your experience with Advanced Actions? Have a look at those blog posts, where I explain the functionality of question slides.
http://blog.lilybiri.com/question-question-slides-in-captivate
Question Question Slides - Part 2 - Captivate blog
The easiest way for me would be by using custom question slides. And then there is the problem of reporting: do you need reporting to a LMS?
Which version are you using?

Similar Messages

  • Problem with end-of-Quiz feedback...Captivate 5.5

    I've created a short course with a quiz.  At the end of the quiz, i would like to have the learner go to one of two slides (one for pass - the other for fail).  From the "pass" slide, I would like them to click a button where a PDF certificate will open.  The "fail" slide will let the user review the content of the course.
    Currently, my file will show the "pass" slide, but will advance to other slides when the button is clicked to print the certificate. 
    Thus far, the "fail" actions are acting as expected.
    Can anyone give me suggestions of how I can fix my file?

    Select the slides you want to hide in the Filmstrip, use the right-click menu to hide them. But it is not possible to show a slide by an advanced action, here I do not know what is meant at all? You can skip a slide using a statement Jump to, but a hidden slide will simply not been included in the published version, no way to get it back once the SWF (or other output) is created.
    Another remark: be very careful with actions executed 'On exit' because they will only be done if the last frame of the slide is also reached. That is not always the case, if you have an interactive object that has Success/failure actions to go to another slide the last frames after the pausing point of that object will never be visited and the On exit action not be executed.
    Lilybiri

  • Clickable links in Quiz Feedback

    Is there a way to add Clickable links in Quiz Feedback??

    Hi Gyanendra,
    I think the only way you could do that would be to place a click box over the top of your Success or Failure captions and uncheck the option Pause project until user clicks, that way you then just set the On success menu to Open URL or File.
    I totally agree that you should be able to include links in captions, as well as *images, this is something I have tried to get implemented in Adobe Captivate for years now.
    If you would like to add your support, then please submit this as a feature request using the web address I have included below.
    Adobe Captivate Feature Request/Bug Report Form 
    * You can get around the image issue by simply creating your own text captions and including the graphic in the custom caption design.
    Best - Mark
    Visit the macrofireball blog

  • Email quiz feedback

    Hi all!
    Is it correct that the email quiz feedback is supposed to
    only produce the email and not send it automatically? This gives
    the students a way to edit the email before they send it and that
    can't be right.
    Another thing is that the option to send the result as an
    attachment does exactly the same as the only other option: Puts the
    result into the email body without any attachment.
    Anyone else experiencing this or have a workaround?

    Hi again
    I'll have to defer to someone more knowledgeable than myself
    for the infinite quiz bit.
    Here is what I'm envisioning for what I'm working on. Once
    complete, I offer a package that contains mostly instructions on
    what you need to do to set up reporting via E-Mail in a secure
    fashion. I'm not seeking any monthly fee or anything like that. I
    was thinking more along the lines of a one time purchase. Perhaps
    somewhere in the range of $40 - $80 or whatever. A one time shot
    that spells out what you need to make it work. If you have a server
    already that can understand CGI scripting and send E-Mail from a
    script, all the better. You just install the script, configure
    things and off you go. But for those that have no capability along
    those lines, there is a service that could be used. Any and all
    fees for said service are between the Captivate developer (or
    company paying the developer) and the service. I would be out of
    the picture at that point. My only role is to offer the means for
    securely sending E-Mail from Captivate. So the question I was
    looking to answer was to ask if that price would seem reasonable.
    If not that price, what would?
    Yes, I could certainly just make the solution available at no
    charge. Anyone that has looked at these forums more than an hour
    knows that this is how I operate 99% of the time. But this
    particular thing has been a bit of effort to pull together, so I
    wanted to put feelers out to see if it would hold any financial
    enticement or if folks would balk, regardless of price.
    I've seen the whole E-Mail issue crop up enough here that I
    began to see if alternate ways could be used.
    Cheers... Rick

  • Adobe Presenter Quiz Feedback

    Wondering if anyone knows why my quiz feedback (using Adobe
    Presenter 7.02 and PowerPoint 2007) is blurry after publishing.
    Looks good prior to publishing and my question text, etc stays
    clear? Help?

    You would need to create the questions in Captivate. The questions don't translate across the products.

  • How can I disable the "go to last visited slide" option in captivate?

      Can anybody  tell me how can I disable the "go to last visited slide" option in captivate so that every time when i launch my captivate file from a LMS, it WILL NOT go back to the last visited slide? I know that Lectora has a checkbox for this but i can't seem to find it in Captivate.

    Are you deploying on a LMS? In that case check the option 'Never Send Resum Data' in Preferences, Quiz, Reporting, LMS Customization Settings.
    If you are not deploying on LMS, check if Self-paced Learning is disabled in the TOC?
    Lilybiri

  • Customised menu slide and customised quiz feedback slide

    Hello everyone,
    I was wondering if anyone can help point me in the right direction as to how I can use Advanced Actions/Variables to produce two things, a menu slide that shows a tick when a section is complete, and a single quiz feedback slide that shows a summary of questions with correct/incorrect.
    Customised Menu Slide
    I'm trying to build a menu so that a learner can go into any unit in any order. When they finish the slides in that unit, they are returned to the Menu slide and a tick appears against that unit. There is an example below to give you the idea.
    Quiz Feedback Slide
    I'm also trying to build a quiz feedback slide to let learners know which questions they have gotten wrong in a quiz. I don't want to use the Quiz Review function as that shows me the questions and wrong answers. I would just like a summary slide, as in the example below.
    For the course menu, I'm using some helpful posts from Lilybiri and trying to adjust her tutorial on customized course menu at http://kb2.adobe.com/community/publishing/855/cpsid_85530.html to show the ticks instead of hiding the unit links. I'm not sure where to start with the quiz feedback slide.
    I'm hoping that someone with a bit more experience of advanced actions/variables will be able to step in here and let me know if i'm going in the right direction with this.
    many thanks in advance,
    Loraine

    Hey Lilybiri, sorry to revive this thread, but I would like to do this but with question pools? Can that be done? If yes, how...?
    My issue with a little more detail: We are replacing the ageing, proprietary content creation solution of our LMS supplier with Captivate. The main purpose of our LMS is not providing learning-courses but testing our users with quizzes.
    We are required (strictly governmentally regulated business) to train and quiz our employees on certain topics. So the main functionality used of Captivate, Version 6 btw, is the quizzing functionality. We went for Captivate because it's got the question pool ability which by the newest prescription we are required to deploy in our 2013 line of employee certification tests/quizzes.
    After passing a quiz, the old solution gave a very nice overview of the answers given and the correctness of those (see screenshot attached). I'd like to replicate this to a certain degree with Captivate. Notice the screenshot by the way, the old solution got partial scoring which Captivate can also do, unfortunately not when using question pools. Anyway, not the issue here, the issue is the result slide. I have been asked to implement a result slide, similar to the old solution, where all the answers are listed and also a hint if the answer given was correct or wrong (as partially correct does not apply anymore, now that we are using question pools) because the user has then jump to that slide and review and discuss it with the teacher/test supervisor of that day.
    We have a total of ~60 questions in 6 pools. 25 get picked, at least 3 out of every pool, smallest pool has 6 questions. So how can I track a) which question has been picked and displayed to the user b) as which slide number/at which position and c) which answer was given, in this highly shuffled, dynamically created environment? It's not like I can make a result slide with 60 lines and mark each line as either unseen, correct or wrong and maintain 60x3 variables during the quiz. Any ideas?
    Of course, the user could just review the whole quiz and quickly skip all questions answered correctly and discuss the ones the user failed. But this somehow doesn't seem right and unprofessional, especially since the old solution could do that since years. At least a hint which questions the user got wrong would be the minimum expected...
    Thanks in advance.

  • I accidentally deleted a button I need on the quiz results page in captivate 8. How do I get it back?

    I accidentally deleted a button I need on the quiz results page in captivate 8. How do I get it back?

    Go back into Quiz, Preferences, Pass or Fail. Uncheck 'Retake button' and check it again, it will reappear on the Score slide.

  • Feedback options to End users

    Hello,
    I want to provide the feedback options to end user regarding the Portal performance or portal look and feel.
    For this I was guessing to place a Label control,  Input box, submit button etc.,
    wherein user enters his/her comments which inturn clicking on Submit button should send comment to specific email Id.
    I want to know the approach which one would be better - JSPDynpages, webdynpros etc., to implement it.
    Please, appropriate solutions to implements. Any documents/URL links would be highly appreciated.
    Thanks for your time and valuable inputs.
    Best Regards,
    Ravindra

    Hi Ravindra,
    Its Possible to Provide  to provide the feedback options to end user .
    You do it in several Ways:
    >XML Forms
    >Webdynpro Java
    >Webdynpro ABAP
    >BSP Applications
    >J2EE Applns etc.
    I suggest you to go for Webdynpro Java:
       > Which needs Minimal Java code to face your requirment
       > You can store your user data in R/3 By using Adaptive RFC Models
       > Supports number of UI Element Functionalities.
    We can integrate webdynpro applications into portal by using SAP webdynpro iView
    Just have a Look at this,
    http://help.sap.com/saphelp_nw04/helpdata/en/5c/1b76bc3da0504e8b535cf3e154eaa7/content.htm
    Please go through these,
    https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
    Regards,
    <b>Ramganesan K</b>

  • Web Gallery Feedback Option

    I'm using PhotoShop 8:
    I want to use the Automate/Web PhotoGallery on my website in a separate folder as a tool for clients to review image comps.
    I'd like to use the template that includes the feedback option, but when I upload the folder and files to my server all the functionality of the gallery works except the feedback/approval form.
    How do I get this to work.
    THX

    With FireFox Tools-Options-Content and make sure 'Enable JavaScript' is checked.
    There may be another reason it doesn't work though. I no longer have CS but a quick test with the CS2 version works for me ( local, didn't test on server ).

  • What happened to the feedback option?

    I'm using Aurora, it imported all my settings from firefox 4 and it is not showing the feedback option at the top right corner.

    Do you have the Feedback extension installed and enabled?
    *Tools > Add-ons > Extensions
    You can always use Aurora > Help > Submit Feedback

  • Feedback option on the website

    Does anyone else find that the feedback icon on the Canon site is inactive?
    Is there any option to give feedback to the company?

    Hi formercanonuser!  The 'Feedback' option appears to be functional on our website at http://www.usa.canon.com.  The survey will launch in a new window, so you might need to turn off any pop-up blockers you may have.  Also, please note this is a survey about the design of the website.  If you would like to send us any comments or concerns regarding a product, please visit the Contact Us section of our website.  You can call or email to share your feedback!

  • Feedback options in Flash quiz template

    I am a Flash novice using the Flash Quiz template and trying
    to create multiple conditional incorrect feedback responses for
    each question. Currectly the array only has one asset dedicated to
    providing feedback for an incorrect response. Is there a quick and
    easy way to add two more conditional incorrect feedback
    responses?

    Is there no one who knows how to do this?

  • Insert specific image + text to quiz feedback

    Hi,
    Within Captivate quiz, I know there is a facility to offer text feedback to the learner dependent upon the option clicked by the learner after the Submit button is depressed.
    However, is there a way to include an image too? So if a learner clicks the Correct option, they see a message saying (for example) "Well Done" as well as Image01. And if they click an Incorrect option they would probably get a text message saying "sorry, the option is incorrect" along with Image02.
    In the straightforward setup, it seems that only text can be entered.
    Any help will be most appreciated.
    Many thanks
    John
    PS: I use Captivate 5 but Captivate 4 is not much different, so any help from those who use Captivate 4 too is welcome.
    Thanks again.

    Hello again
    Actually, the feedback captions are composed of a couple of elements. The text you type and a background image. You are able to remove all text leaving behind the background image. You are also able to choose any image you like for the background image. You just browse to it and choose it. You will likely have to adjust the size of it after choosing an image.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Can I stop the slide audio (text to speech) when a quiz feedback caption with audio appears?

    Hi there, We use text to speech on all our slides, however there is a problem we have been unable to solve.  If we have audio on a quiz slide this continues to play when the feedback caption comes up.  This means that if a learner clicks the answer quickly they hear the slide text and the caption text on top of each other.  How can I stop the slide audio if the feedback caption appears.  We have tried advanced actions to "stop triggered audio" and experimented with invisible text captions that have the audio added but have not solved it so far.  Does anyone have any idea how to resolve this? Any help gratefully received, Many thanks Janet
    PS We are using Captivate 8 with the installed Text to Speech voices

    This is currently a common problem with audio in quiz slides of Captivate modules.
    The configuration options for interactive objects on quiz slides to not allow the same level of control for audio playback that you have with normal interactive objects on other slides.  (e.g. being able to stop other audio when something is clicked).
    The Stop Triggered Audio action is often misunderstood.  But as its name clearly indicates, it really only applies to stopping an audio clip that was TRIGGERED by another advanced action.  That doesn't apply to background audio, slide level audio, or object level audio.
    My suggestion is that you go back to your design and work out which of the two audio clips (the slide or the feedback audio) you can do without.  Maybe your learners don't need them quite as much as you think.

Maybe you are looking for

  • Error in outputting xml formatted data

    Hello, I'm trying to output xml formatted data using apex. At about 70% into the formatted output I get this in the browser:   <descript>punct= & > < /,() &</descript>   </row> - <row The XML page cannot be displayed Cannot view XML input using XSL s

  • Change the format of the name of the sender in UWL

    Hi Experts , In my UWL the column "FROM" , display  the  name of the sender as " Last name, First name" . My requirement is to display  the name as "Firstname, Last name " . eg: In my uwl now it display  like "Jobs, Steve" . But my requirement is to

  • Dbca template migration between 10.2.0.1 and 10.2.0.3

    Hello Oracle experts, Question: Is there anyway I could upgrade my 10.2.0.1 dbca template to work with 10.2.0.3? Background: We have bunch of custom dbca seed templates created from 10.2.0.1, which allows rapid setup of database with per-defined data

  • Link Messaging between IPhone and IPad

    I am trying to link the messaging on my Wifi IPad (Gen3) to receive all of the messages that are sent to my Verizon IPhone. (If send from the IPad all messages/replies show up on both devices because they are linked via Apple ID) This is done through

  • CS3 deactivation missing

    How can I move CS3 Design Standard license to another computer? There should be choice for deactivation in the help menu but it is missing.