Quiz navigation fails once published

In a recent Captivate 4 project, I added series of quiz questions throughout the tutorial. For each question the correct answer prompts the "click anywhere or press 'y' to continue" message. During the project preview, clicking anywhere or pressing 'y' allows the user to move to the next slide. However, once published as an .html file only the 'y' key allows the user to move forward.
Any insight on this problem would be most helpful. Thank you in advance.

Thanks for the detail.
Couple things then...
1. 58+ slides is a lot of slides. Can you cut the project into two courses?
2. If you copy the project then delete slide 57 and/or 58, does the navigation work as expected? Maybe it's an issue with just those slides.
3. Do you have the latest version of CP7? (Adobe - Adobe Captivate Support Center : Downloads) - no guarantee but be sure you're working with the latest version.
4. Try actually publishing and testing, ideally from a webserver (or the LMS). Running 'locally' can induce problems that don't manifest when run online, though it seems unlikely in this case.
5. Flash Player version is current, or relatively current? You have installed the version (or better) that is specified in the project's Publish dialog?
6. Try changing the Playback bar you use, just to see if that makes a difference.
7. Related, enable the TOC (in the 'Skins' panel) and try to navigate to/past the troublesome slides that way, just to see if you can even get to/past that slide via a different method (if you can, indicates a problem with the navigation moreso than the slide itself).
HTH!

Similar Messages

URL links do not show once published

Links added in PSM do not show once published. The links lists shows and works in preview but fail to appear in iTunes when published.
Ger.

Links added in PSM do not show once published. The links lists shows and works in preview but fail to appear in iTunes when published.
Ger.

Captivate 7 project fails to publish to Adobe Connect

ERROR MESSAGE:
"Failed to publish your project to the Adobe Connect Server. Verify your network conection and try again"
First of all, my network connection is fine. And I have run through a number of solutions to try to make this work but im running my head into a wall trying to figure it out. Any help would be greatly appreciated.
The project is a quiz and survey with multiple choice, likert, and short answer questions with 5 .flv videos. I have a sepearte file with likert questions (I heard those a problematic) that gave me the same error when I tried to publish with captivate 6, but worked with captivate 7. So it publishes that file with likerts but not this one. The publisher gives the error whether the file has videos or not. Any ideas?

Hi there,
From the post, it looks like the issue is specific to a project. Is it possible for you to share the problematic project with us so that we can investigate the issue at our end? Please upload it to a shared workspace (Acrobat.com) and send me the link to [email protected]
Thanks,
Nimmy Sukumaran.

Failing to publish and deploy from CVS Repository

We have installed CVS on one of the machine and we have configured the CVS in our studio (version 5.7 MP3).
We stored the project in the repository(CVS) and when publish and deployed it pops up with an error message and fails to publish.
But before storing it in the CVS there were no errors and was successfuly publishing and deploying.
Even the exported file if executed in a different workspace (without CVS configured), it runs successfully.
Is it that we need to unlock in some file for successfull execution.
Please suggest / help.
Thanks in advance
Jayant

Hi,
Do you want to configuring SSL for cloud service? I suggest you have a look at the following article.
#http://www.windowsazure.com/en-us/documentation/articles/cloud-services-configure-ssl-certificate/
Please try to do as above article, in addition please note the certificate must meet the following requirements for SSL certificates in Windows Azure. If I misunderstand, please feel free to let me know.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

In "edit" mode, my movie speed is fine. Once published it seems to slow down and become all jerky. Any ideas? Thanks

In "edit" mode, my movie speed is fine. Once published it seems to slow down and become all jerky. Any ideas? Thanks

I have a revision a imac g5 with the same problem with only macbreak podcast. I know leo laporte said that the podcast was done in 1080p and my computer with its built in 64 megabyte graphics card might have trouble with this podcast but your machine must have a better graphics card than mine. 1080p requires at least 128 megabytes of graphics memory built in. My machine played this podcast on quicktime fine until they came out with the update to quicktime last week or two ago. I was going to upgrade my memory until I came accross your story and your machines doing the same thing with much better specs. I think it might be the quicktime update that is causing a problem. Maybe Leo will talk about this problem since he is doing a mac show about macs.

IPod touch failed to publish video?

iOS 6.1.3 iPod touch 4G it always says failed to publish 'name of video' please help

You might want to check your system settings on your iPod Touch. Under the About tab, look at how much free space you have on the iPod touch.

Photos move from where i place them once published

i've created my site and it's been working great for a couple months. I just added new photos to several pages and they all look fine once published except one page! have tried moving them again in iweb, saving, then publishing again, but same thing - the photos are misplaced and covering text.
any ideas?? thanks!
site is http://www.luminousadventures.com
and then on the "Reiki and Bodywork" page is the problem.
(I haven't figured out yet how to have my url forwarding go to individual pages - that's another question!)

well, I solved my problem with a very low-tech solution: since every time my photos would appear about an inch higher than where I'd placed them while in iWeb (once published), i intentionally placed them an inch lower than I wanted (had to do a bit of adjusting since I was guessing where they'd show up), but it worked!
I still don't know why this is only happening on this one page, when all the others I did the same and they are fine.
here's the results: http://www.luminousadventures.com Reiki and Bodywork page

Photos misaligned on the page once published...

The photos are perfectly placed in the iWeb project. I publish. The photos have moved in their positioning ... I've never seen this happen before. I've remade the page several times. The photos on the other pages are exactly where they should be once published. What might be happening here?
http://lowryolafson.com/lowrysnewcd.com/borderland/the_band.html
Each photo should be lined up next to the name of the performer. They are in the original iWeb project.
B.

This is quite difficult to demo in written text, but you can have image inside a text box and this text box is inside another text box as here:
the red border box is the image, the white border box is the inside text box and the black border box is the outside text box.
You have to copy the image (red border) into the small text box (white border) , then copy the small text box (white border and its image) and paste it inside the large text box (black border), then use text wrap around the smaller text box to have the final effect.
here is the end result: http://test.cyclosaurus.com/imgTT/Blank_2.html
note that this method will allow you to have padding between the photos and the text, there is no other way around it.

FAil to publish CRL

I am installing a new CMS server, and receive fail to publish CRL, error=65, Object class violating. Can someone tell what I am doing wrong?

Probable you are trying to publish on 5.2 directory server and using 4.2 CMS. Other reason can be you are installing CMS 4.7 and trying to publish on 4.x directory server.
Objectclass definitions are different in both versions.

Animate "Fails" to Publish project (Windows 7 Professional); can't access folder?

I have seen the other "Publish" question on this forum, but this seems to be another issue. When publishing a project to Web, the resulting dialog indicates...
"Failed to publish to Web at path: "pathname". Make sure the folder is accessible and the file is not locked.
All the same, when I go to the project saved location I find new Publish and /Web folders, a new Publish/Web/Image folder, an Edge_includes folder and the expected .js and .htm or .html files. For a while, I simply used these and ignored the error messages. Something may have changed in my workflow or setup, although I have no idea what, but now the resulting published package does not work. By "not work," I mean when I click the resulting .htm(l) file the animation is blank.
Windows 7 Professional
Edge Animate 2014.1 (up to date as of today)
I have uninstalled EA completely, including preferences, re installed, renamed the project, changed folder locations, same problem.
Help would be appreciated.

Hi,
Can you have a look at these tutorials to make sure that you have everything covered?
Edge Animate Publish Files and JS Folder | EdgeDocks.com
Edge Animate Help | Publish your content
Thanks,
Preran

HTML5 quiz project plays if published with CP8, but not CP7

I have a project that only consists of a title page and quiz questions that is published to HTML5 with CP7. It plays fine on an iPad, but will not load on a desktop browser like IE and Chrome; the wheel spins for a second and then just a blank page.
What's funny is that I just tried publishing the same project with the trial version of CP8 and now the project plays fine from my LMS. What's even more bizarre is that I have other project files that are a mix of regular pages and quiz questions, and they play fine in HTML5 on the iPad and desktop, all published with CP7; it's just this one project file that consists of quiz questions that's causing problems.
Any clues on how to get the project running in HTML5 on desktop when publishing with CP7?

Sounds to me like you need to reinstall your FTP program instead.
If the exact same files that you publish can be uploaded by your colleague and will work, then the problem is not with Captivate's output but in the transfer method.
Perhaps your FTP program is messed up or perhaps you are uploading the files to the server with the wrong file permission settings.
/Michael
Click here to visit the www.captivate4.com blog

Every day Expired subscription clean up job fails on publisher server

Dear All,
Few days back I configured transactional replication b/w 2 server after that every day I noticed
Expired subscription clean up job fails on publisher server but not any effect to replication it's going smooth.
ERROR MESSAGE:
Only functions and some extended stored procedures can be executed from within a function. [SQLSTATE 42000] (Error 557). The step failed
please help me!!!
Thank In Advance!!!
mastanvali shaik

Actuvally already I configured replication for this server 3 database after we moved to another server for some h/w issue.
that time we deleted subscriber and publisher and break transaction replication.
after new server configuration it's allow to configure replication for 2 databases only.
as per above query I found category 1 for 3 databases but 2 databases are in replication.
the another databases that showing category 1 is past in replication, but it doesn't allow to configure replication.
please give me solution for same .
Db name
dbid
sid
mode
status
status2
category
cmptlevel
version
ABCD
7
0x010500000000000515000000C953D90F09EF4A00F4EBEF3281230000
0
65536
1090519040
1
100
661
-replication running
FGH
11
0x010500000000000515000000C953D90F09EF4A00F4EBEF3281230000
0
65536
1090519040
1
100
661
- not allowing for replication
XYZ
12
0x0105000000000005150000006FE21C5B049413F15AD147AEF4010000
0
65536
1090519040
1
100
661
-replication running
past replication working for three databases
mastanvali shaik

Windows failed to publish property printBinNames - error 8007200d

Just like this old post (http://social.technet.microsoft.com/Forums/windowsserver/en-US/c9a445e2-b28f-4e57-bfef-c1a2f89b8cd6/printers-not-being-published-in-active-directory) I'm noticing some issues with printers being published to AD.   However
the error code I'm seeing is 8007200d.
Q:\>err 8007200d
# as an HRESULT: Severity: FAILURE (1), Facility: 0x7, Code 0x200d
# for hex 0x200d / decimal 8205 :
ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS winerror.h
# The specified directory service attribute or value already
# exists.
# 1 matches found for "8007200d"
An example of the event which only has fired for this specific printer. It
IS published in AD however and can be found with the Find Network Printer wizard.   It's been on this print server for well over a year too.
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 9/13/2013 10:47:07 AM
Event ID: 322
Task Category: Publishing a printer in the Active Directory
Level: Error
Keywords: Active Directory,Classic Spooler Event
User: SYSTEM
Computer: PrintServer.MYDOMAIN.COM
Description:
While attempting to publish the printer to the Active Directory directory service, Windows failed to publish property printBinNames at LDAP://its-ad-a1.MYDOMAIN.COM/CN=PrintServer-AA-BB-4SE-COLOR-FXLSR,CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MYDOMAIN,DC=org. Error: 8007200d
Using ldifde I queried AD to find out what it has about this specific printer:
ldifde -s its-ad-a1.ABC.MyDomain.org -r objectclass=printqueue -d "CN=PrintServer-AA-BB-4SE-COLOR-FXLSR,CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org" -f test2.txt
Oddly enough, there is no printBinNames in the output:
dn: CN=PrintServer-AA-BB-4SE-COLOR-FXLSR,CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org
changetype: add
objectClass: top
objectClass: leaf
objectClass: connectionPoint
objectClass: printQueue
cn: PrintServer-AA-BB-4SE-COLOR-FXLSR
description: 172.28.30.26, HP CM1415fnw
distinguishedName:
CN=PrintServer-AA-BB-4SE-COLOR-FXLSR,CN=PrintServer,OU=Level5,OU=Servers,OU=
ManagedObjects,DC=ABC,DC=MyDomain,DC=org
instanceType: 4
whenCreated: 20130911233154.0Z
whenChanged: 20130911233204.0Z
uSNCreated: 629573861
uSNChanged: 629573861
name: PrintServer-AA-BB-4SE-COLOR-FXLSR
objectGUID:: b51qMLuOCUmGgwWkBWarAg==
flags: 0
uNCName: \\PrintServer.ABC.MyDomain.org\AA-BB-4SE-COLOR-FXLSR
versionNumber: 4
location: XXX
serverName: PrintServer.ABC.MyDomain.org
portName: 172.28.30.26
driverName: HP Universal Printing PCL 6 (v5.6.5)
priority: 1
printStartTime: 60
printEndTime: 60
printMaxResolutionSupported: 600
printOrientationsSupported: LANDSCAPE
printOrientationsSupported: PORTRAIT
printCollate: TRUE
printColor: TRUE
printLanguage: PCLXL
printShareName: AA-BB-4SE-COLOR-FXLSR
printSpooling: PrintAfterSpooled
printKeepPrintedJobs: FALSE
driverVersion: 1025
printMaxXExtent: 4318
printMaxYExtent: 9144
printMinXExtent: 762
printMinYExtent: 1270
printStaplingSupported: FALSE
printMemory: 131072
printRate: 12
printRateUnit: PagesPerMinute
printMediaReady: Letter
printNumberUp: 6
printMediaSupported: Oficio 8.5x13
printMediaSupported: Custom
printMediaSupported: 16K 197x273 mm
printMediaSupported: 16K 184x260 mm
printMediaSupported: 16K 195x270 mm
printMediaSupported: 10x15cm
printMediaSupported: 5x8
printMediaSupported: 4x6
printMediaSupported: Double Japan Postcard Rotated
printMediaSupported: A6
printMediaSupported: Japanese Postcard
printMediaSupported: Envelope Monarch
printMediaSupported: Envelope B5
printMediaSupported: Envelope C5
printMediaSupported: Envelope DL
printMediaSupported: Envelope #10
printMediaSupported: B5 (JIS)
printMediaSupported: A5
printMediaSupported: A4
printMediaSupported: Executive
printMediaSupported: Legal
printMediaSupported: Letter
printerName: AA-BB-4SE-COLOR-FXLSR
printPagesPerMinute: 12
url: http://PrintServer.ABC.MyDomain.org/AA-BB-4SE-COLOR-FXLSR
objectCategory:
CN=Print-Queue,CN=Schema,CN=Configuration,DC=rootad,DC=MyDomain,DC=org
shortServerName: PrintServer
printDuplexSupported: FALSE
dSCorePropagationData: 16010101000000.0Z
Why then would Windows through EventID 322? printBinNames doesnt exist to conflict with per the error code thrown.
Even more odd is that I believe this error was preventing another newly crated printer from being published.   A new printer was created on the PrintServer. But the printer would now show up in the Find network printer wizard. Right at the
same time I added this new printer, the Event ID 322 for the unrelated printer (AA-BB-4SE-COLOR-FXLSR) was logged. Odd.
I then unpublished and republished the AA-BB-4SE-COLOR-FXLSR printer. Windows logged both success and the same failure! Also interesting is the published name it used is different
9/13/2013 12:47:19 PM - The printer was successfully removed from the Active Directory directory service. Print queue CN=PrintServer-AA-BB-4SE-COLOR-FXLSR was successfully deleted from container LDAP://its-ad-a1.ABC.MyDomain.org/CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org. The printer can no longer be located by searching Active Directory. No user action is required.
9/13/2013 12:47:19 PM - The printer was successfully published to the Active Directory directory service. The print queue CN=PrintServer-AA-BB-4SE-C0064222313 was successfully created in container LDAP://its-ad-a2.ABC.MyDomain.org/CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org. No user action is required.
9/13/2013 12:47:19 PM - While attempting to publish the printer to the Active Directory directory service, Windows failed to publish property printBinNames at LDAP://its-ad-a2.ABC.MyDomain.org/CN=PrintServer-AA-BB-4SE-C0064222313,CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org. Error: 8007200d

...I did install a bunch of printing related hotfixes near the end of 1/2014, which is possibly the reason why it hasn't occurred again.
I'm seeing this too. Win2012r2 server is fully updated till 05/2014. For just newly installed printer and first time listing in AD i got:
EventViewer's PrintService->Operational says:
The printer was successfully published to the Active Directory directory service. The print queue CN=HP1320-XXX was successfully created in container LDAP://DC4.XX.XX/CN=xx,OU=XX,OU=XX,DC=XX,DC=XX. No user action is required.
EventViewer's PrintService->Admin says:
While attempting to publish the printer to the Active Directory directory service,
Windows failed to publish property printBinNames at LDAP://DC4.xx.xx/CN=xx,CN=xx,OU=xx,OU=xx,DC=xx,DC=xx. Error: 8007200d

I created a navigation page and published as portlet now how to add this pg

I created a navigation page and published as portlet now how to add this page... i dont see in the portlet staging area.... i left the check mark publish as portlet on when i created the page...
how do i add this to the page...

The Navigation Page Portlet should be available in the Portlet Repository - select Published Portal Content -> Your Page Group Name
Lisa

Sccm 2012, wsus, failed to publish client

Hi
ok, we had some issues with the offline imaging injecting updates into the images after looking at some posts on here I decided to uninstall wsus take the role off the server it was on then reinstall again. we have also updated to R2 the CU1, knock on effect
from this is the client isn't being published see log below., my question is how do I get the clients matched up?
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions do not match.~~ at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String
sdpFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014
07:35:38 4012 (0x0FAC)
ERROR: Failed to publish sms client to WSUS, error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Failed to publish client with error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Regards
Dave

To fix this issue, check solution of "El_Tex_de_Person" in below link
http://social.technet.microsoft.com/Forums/systemcenter/en-US/054075d6-6898-4a71-b152-52cb272a393c/client-will-not-publish-through-sup?forum=configmgrsetup
Also check below linkhttp://www.faqshop.com/wp/configmgr/cm12/cm12trobshoot/cm12clients/error-failed-to-publish-sms-client-to-wsus-error-0x80131622
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Quiz navigation fails once published

Similar Messages

Maybe you are looking for