Quiz Question not to be marked???

Hello..
I have created an elearning module with a few question slides... a couple of true/flash.   So we are not worried about recording the results... just that they finished.  So i do i tell it not to record the answers for the quizzes???
Rich

Hello...
Thank you for the suggestion of using Complete/Incomplete, Slide views only.  That work great.  It is funny.. so when i tested the course..  I went through the whole course and answer all the questions correctly.. i got the score of "Successful 100%".... but when i went through the course and answer at least of the questions wrong.. i got the score of "Completed".
Why is that???
Rich

Similar Messages

  • Audio on last slide after quiz questions not playing

    Captivate v5.5
    I have a project with a question pool and a series of random questions
    The random question slides are without audio.
    After finishing the question pool the project closes with the final slide which does have some audio - which runs fine when I test the slide.
    However when I test the whole project (F12) the audio on the last slide does not play.
    The audio on the slides prior to the random question slides plays without any problem.
    Any ideas please?
    Noel

    Anjaneai,
    Thanks for the suggestion. But changing the question setting to infinite attempts will just allow the user to retry each question over and over until they get it correct. I want to give them one chance to answer each question for the entire quiz. Then, if they don't pass, they can try the entire quiz again.
    I ended up finding a resolution, though. Based on one of the suggestions from this blog, I just shortened my slide time for each question to .5 sec (it was originally 3 sec). That seemed to do the trick!
    http://blog.icslearninggroup.com/2011/12/adobe-captivate-quirks.html
    Kristin

  • Captivate 7 - quiz questions not showing tick/select boxes on ipad

    I'm having an issue when testing a course on ipad, on the question slides the radio buttons/tick boxes don't show. The module also doesn't show which answer you have selected. The course works fine across other browsers on desktops (both PC and MAC).
    I've checked the HTML5 tracker, and there are no reported errors. The questions are default captivate multiple choice question.
    Thanks,
    Chris.

    I have installed the 7.0.0, patch upgrade to 7.0.1.237, and instead of using the Master Slide I have uploaded a white background image. Within the properties tab>general, I have checked the project background option and uploaded my background image. Both Master slide objects on top and Use master slide background are unchecked.
    I have uploaded my module to Moodle 2.5, and tests have gone well on all desktops and all browsers. Only the last slide contains any interactivity, and has checkboxes and a submit button to confirm their attestation of completion. However, when tested on an iPad, this one slide that contains the check boxes and submit button appear white/or blank. Would anybody have insight into this issue?

  • Quiz questions not playing

    I have published a file that has two quiz pools playing in it.  When I try to play the swf file the quizes don't show.  There are just blank screens where they should be.  I see that they have separate swf files.  What do I need to open to make this run correctly?

    Hi there
    How are you viewing? What version of Captivate are you using? I think this is a common issue if you have Flash Player 10 installed and you are using Captivate 3.
    Click here for more
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Captivate 6 - Published - PDF does not play quiz questions

    I just published my captivate 6 presentation.  I am launching the .pdf file to view.  At the end, the quiz questions do not work.  I get a white screen and not my questions.  Any ideas?  Thanks

    Below is a screen shot of the published settings.  The whole training presentation plays as expected.  Then when it gets to the quiz questions I get a white screen and nothing happens. 
    After I publish, I go to the zip file and run the pdf version. 
    This is for someone to view the training outside of our LMS system.
    Here are the preferences ....

  • Quiz questions will not retain format when question is changed.

    OK forum folks. I'm working on my first e-learning project and have ran into a problem with question formating. The instructions/help basically tell you to click here and click there. I can easily figure that out. The questions I seem to have are quite a bit deeper.
    I have a predefined template which is company approved. I have created master slides in the question pool for both a 4 item match and a 5 item match (I have found if I add a line to the 4 matching line quiz the line spacing and formatting changes). The placeholder questions are essentially non-questions.
    I duplicate the master slide in the question pool to maintain the original format (spacing, location, etc.).
    I change the placeholder questions on the duplicated slide to the real question (slide is still in the slide pool)
    The formatting (font, spacing, locations, etc.) change on the new (edited) questions and require reformatting.I have also tried copying the master question slide to the filmstrip and editing the copied slide questions in the filmstrip. I receive the same results.
    Is there are way I can create masters in the current format so I can use the approved templates, edit the questions and not have to reformat the slide after the questions have been changed?
    Also, is there a way to lock the formatting of the questions? If I want to add/delete a new question or line to the slide, it would be great to be able to not have to reformat the slide for the change.
    I look forward to your answers.
    Thank you.

    I am trying to deal with the same issue. The master slides are more about background elements and navigation buttons, but they do not seem to allow for the addition of quiz elements.
    I have come up with a workaround that I hope will work. What I am doing is creating a new project that becomes my quiz question layout library (Let's call this Project 2). In this project I add the various types of questions I will be using in my project (multiple choice with three choices, multiple choice with five, true/false, etc...). I get all the quiz elements in place for each type of question (the header, question, submit/clear buttons, review area, etc...).
    These slides serve as my Master slides for my actual project (Project 1). I can copy and paste the appropriate layout from Project 2 to Project 1 and then change the questions themselves.
    I am sure I will find out the downside of this soon enough...
    There is no doubt the creation of masters for quiz questions needs work, actually it needs just to exist!

  • Retake Quiz button not resetting questions

    Hi all
    I have a quiz with 7 questions, all single-answer questions.
    When the quiz results are displayed, the Retake Quiz button is displayed if they have failed the quiz.
    Upon clicking Retake Quiz, it takes me back to the start of the quiz, however, the previous answers given have not been reset and the question is greyed out.
    I've been reading various posts on here, indicating that similar things are happening, however I couldn't find the reason with the quiz settings that I have:
    Quiz is set to Answer All.
    Quiz is set to Allow Backward Movement.
    Quiz is set to allow 100 attempts on the quiz.
    Quiz is set to display Retake Button.
    Each quiz question is set to allow 1 attempt.
    I thought that by increasing the number of attempts allowed on each question that this would solve it, but this just allows me to keep trying on each question until I hit the right answer, and does not seem to solve the problem.
    I'm really not sure as to why, when using the Retake Quiz button, it is not resetting the quiz.
    Any help greatly appreciated!
    regards
    Loraine

    Hi again
    I have now changed the settings in the quiz as per Lilybiri's suggestion. I now have the following quiz settings in place:
    Quiz is set to Required - the user must take the quiz to continue.
    Quiz is set to Allow Backward Movement.
    Quiz is set to allow 100 attempts on the quiz.
    Quiz is set to display Retake Button.
    Each quiz question is set to allow 1 attempt.
    Captivate 4  - AS 2.
    After answering all the quiz questions, and failing, and clicking Retake Quiz button, some of the answers remain greyed out. It will not let you click Reset and will then automatically move on to the next question slide.
    There doesn't seem to be any rhyme or reason to it... sometimes the correct answer remains greyed out, and sometimes an incorrect answer remains greyed out. Sometimes when I click Retake Quiz none of the answers are greyed out, but then if i keep failing the quiz, the answers begin to appear greyed out. I have double-checked that i've set the number of attempts on the quiz to 100.
    I have also tried using the Back navigation button within a quiz, to go back and change my answer, but the answers remain greyed out, and pressing Reset makes no difference.
    It seems the only way I've managed to get a 'clean' retake at the quiz, is to exit from the e-learning, then go back in to it. But this is not going to be an acceptable method, when my company want to give learners the option to retake the quiz only if they fail, and not redo the whole package to get to the quiz at the end.
    Loraine

  • Quiz questions answered not considered

    Hello,
    I created a multiple choice quiz with a few questions, but as I preview it (in a browser and in the project preview section of Cp), or publish it and play it (same places), the answers that I enter are not being considered, every time I keep getting the "You did not answer this question completely" message when I review the quiz after getting the score. The correct question is selected properly on each slide, where I click on the circle to the left of the correct question.
    Thank you for your help with this,
    Manuel

    Manuel,
    Your quiz question slide in this project may be corrupted.  Try opening a new blank project and insert ONE multi-choice or True/false quiz question there and test the functionality.  Does a new blank project work properly?
    If so, delete the problem slide from your existing project and re-insert new ones to replace it.  Let us know if that works.
    One more thing.  DO NOT REMOVE any of the default question slide text captions from quiz slides.  Doing that can cause strange behaviours.

  • The answers questions not selectable in quiz slide for some users

    We have a SCORM Captivate training content published on our LMS (SAP Learning Solutions). Some users can't respond to any questions in the content.For these users, the answers are locked and are not selectable. Also, the Validate and Erase buttons didn't appear.
    The problem concerns about 10% of our users.
    This training contains both content slides and quiz slides.
    The content is published in SCORM 1.2 (SWF + HTML) with Adobe Captivate 5.5. We had the same problem for some users with the previous version of this training content published with Captivate 4.
    All users have the same settings:
    Flash Player 10.3.183.11
    Internet Explorer 6
    Microsoft Windows XP

    The most likely reason for this behaviour is that your 10% of users have entered the quiz and then thought they might jump back to the information slides to check the answer.  On doing so they have exited the quiz scope which immediately locks the quiz.
    Have you actually watched these problem users complete the quiz?  If you are able to do so, make sure that once they start the first question, they answer all quiz questions in turn without jumping to any other slides or leaving the quiz.  If my hunch is right, the person will be able to successfully complete the quiz.
    If the desire is to allow users to jump back to the content section to check information, place a scored button on the first or second slide of your project.  This extends the quiz scope and will mean that the user is still within the "quiz" no matter what slide they want to look at.

  • Flash player 9 not playing quiz questions

    Hi,
    I have just upgraded to Captivate 5 and started to create a new project. I published it as swf and htm files using flash player 9 output becuase my users have flash player 9 on their machines. When testing it I found that the module without a quiz in it worked fine, however I added a single multiple choice question and republished and now all I get is the background screen with the opertunity to open the TOC. The TOC opens BUT you cannot navigate to anywhere within the video. I have checked that Captivate has all the correct upgrades and I know that the htm/swf works OK on my machine and a couple of other peoples machines (who do NOT have captivate installed) but have version 10 of the flash player.
    Is there something obvious I am missing? Do I have to get everyone who is going to take the module including the quiz to upgrade to flash player 10? If I do it will be a pain but possible however I do not understand why the quiz will not work with flash player 9.
    Thanks
    Erika

    You seem to be experiencing the same problem as I am... see post http://forums.adobe.com/thread/779624
    Even when I select "publish to Flash 9" it will only work on those machines that have Flash 10.
    The Flash version that we have is 9.0.16
    Can you do me a favour? Go to www.whatismyflashversion.com
    I'm curious to know what exact version of Flash 9 you have. Is it possible that we just happen to have the one or two Flash 9 versions that don't work with Captivate 5?? Like, if I had 9.0.17 than I wouldn't be having this problem?

  • Quiz slides not to be counted in quiz summary at end - Captivate 4

    I have created a course which has quiz slides at the beginning of the cours which I have marked to not be graded.  These slides are knowledge checks and should not be graded nor be counted.  Then I have quiz slides at the end of the course that I do want to be graded.  But I do not want the quiz slides at the beginning of the course "counted" in the summary quiz slide at the end of the course.  I only want the quiz slides at the end counted.
    How can I change the settings in the quiz slides to "not" be counted in the quiz summary page at the end of the course.
    Thank you for your assistance.

    My best guess here as to the reason for your issue is that you've removed some of the essential objects from the Quiz Slides and that is fouling things up.
    Quiz Slides MUST ALWAYS have the default Question Title and Question Text captions present.  These are special caption objects that are ONLY found on quiz question slides.  If you remove them or replace them with normal captions your quiz slides will malfunction inconsistently.
    The other thing you may have done here by the sound of it is to set Submit All and then move the Submit All button off the slide into the scrap area.  That's also likely to screw things up.  If you do NOT want the user to see the Submit All button until the final quiz question slide then just change them to Transparent buttons and move them ALMOST off stage, but leave at least a few pixels of the button object still sitting over the top of the stage area.  This will mean the user cannot see (and is very unlikely to click) the Submit All button except for the slide where you WANT them to see it.

  • Stuck in course before quiz question

    Hi. I have a course where users get to a quiz question, then after going backwards to review content prior to that quiz question, then upon trying to go forward again, gets stuck on the content slide right before that quiz question and can never move forward again.
    Quiz is set to Answer All, allow backward movement
    Course is locked for every slide, Advnace by user

    Hi,
    Please check the number of attempts you have allowed per question, if the attempt set per question is one, the slide would get locked and would not allow any further attempts to be made
    Please check the attempts for each question, modify it with number that you would like to allow.
    Thanks,
    Anjaneai

  • Modifying Quiz Question Format/Content

    Issue: When we modify a quiz question in PowerPoint and then
    go to the Quiz Manager the entire slide deck reverts to the format
    before the changes, regardless of being saved previously.
    Has anyone had this happen..please help.
    I am trying to make edits/changes to a long presentation that
    I need to deliver tomorrow and I keep losing the work I am doing.
    Is there a better way to make the changes to the slides?
    Thank you,
    Scott

    You can't modify quiz questions in the presentation itself -
    you need to make those changes in the quiz manager itself. You can
    adjust font size, lay out, etc on the slide itself, but not the
    content

  • Learners unable to enter answers to quiz questions

    I've launched our first course and I'm coming across an issue that I haven't encountered as we tested the course.
    I've created the course in Captivate 5.
    All of our learners are using their own computers to complete the training, and I have no control over what equipment they are using.
    A couple have reported that they are unable to enter answers to the quiz question. For example, it won't even let them click on the buttons for multiple choice answers. Those that have reported the issue seem to have older computers (around 5 years old), but say they've updated to the new version of flash player.
    We've tested the module on somewhat newer computers, and we haven't come across that particular issue at all.
    What could cause such a problem?
    sanna

    I think this is what I will try. After I had a chance to talk to those that encountered the issue they said they had moved backwards in the course.
    It never occured to me when testing the course to skip backwards and forwards. Lesson learned.
    Now when you say include a 'scored' button, what do you mean?
    I already have a 'next' button at the beginning of the course that the learner clicks to get started. It's an image button. I see when I look at the properties for that image button that there is an option to include it in the quiz. Is that what you meant? Set it to be included in the quiz?
    Does it make a difference whether or not points are assigned to it, or whether or not it is included in the results?
    Thanks

  • Quiz question formatting

    Is there any fix in the works for controlling how Quiz
    Manager formats quiz questions/answers? Every time we need to make
    an edit and go back into Quiz Manager, we have to reformat our quiz
    slides. This is extremely time consuming and frustrating. Please
    Adobe, put some formatting controls into the quiz manager (such as
    font size), or fix your program in such a way as to not touch the
    formatting that we do to our quiz question slides in
    Powerpoint.

    I have worked a lot with presenter and have manually formated
    the look of the questions after the slide has been generated and
    have not ever had an error. I have changed location, spacing, font,
    and size and added content to quiz slides, all without incident.
    Are you using Presenter 6.2? This may be an issue of using an
    older version of Presenter.
    Jorma@RealEyes

Maybe you are looking for