Quiz Results Analyzer results not displaying correctly

We are using Adobe Captivate 6 and posting quizzes to a local server (configured with the .php files.) When we review quiz results using the Quiz Results Analyzer, some of the data is correctly reported. However, the Pass/Fail is not working right (either everybody who takes the quiz passes, or everybody fails.) Also, we are not seeing a total score.
Is there any tutorial for correctly configuring all of the quiz preferences, so that we get the results we are looking for?

Thank you for the link. I have viewed this video in the past.
The issue I'm having is that, in spite of setting the the quiz options for reporting, the data that is received in the xml files is not correct, therefore, it is not being correctly summarized in the Quiz Results Analyzer.
(It would also seem that the screen name I set here is not retaining its modifications.)

Similar Messages

Search for member activities - points are not displayed correctly

Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
Anne

Sometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt

Eurosign not displayed correctly when picked from database

Hi ..
I'm having a problem getting a eurosign stored in an Oracle Database to be displayed correctly in my Crystal Reports 11.5.
When using the built in (preview) Crystal Viewer, the eurosign is displayed correctly, but when I want to print the report directly to a printer or to export it to pdf the eurosign is displayed as a box?
It only haapens when i need to pick the eurosign from the database. If I insert in a textbox on the report, it will show correctly.
Please Help.
Best regards,
Jacob

What is the source of the text stored in the database. I ran into an issue a ways back where someone was copying news articles from a website into their database and the euro symbol would not display correctly (unless the option HTML Text Interpretation was used).
You might want to do a quick check to see if it is stored as an ascii character using a formula similar to the following;
asc(mid({database, x, 1}))
where x = the position of the euro symbol in the string.
The formula result should be 128.
Edited by: Graham Cunningham on May 22, 2009 12:20 PM

Dreamweaver tables not displaying correctly in internet explorer browser, please help!!!!

Could someone please help me with this issue i've been having for almost a year now and can't find any information on getting this fixed, for some reason the features specs and required tables rows are not displaying correctly, the image is out of aligned when viewing the results using the internet explorer browser only, the firefox browser works just as needed but when i try to view the same code in IE the tables are not aligned properly and the text is not margined correctly either, i tried playing around with the css style that i have and no results. Please help me fix this issue so that my page would display in internet explorer just like under Firefox. Below are the pictures of the problem i'm having.
This picture shows how i want it displayed on the internet explorer and firefox browser:
Here is results in firefox browser:
Here is results in internet explorer browser:
As you can see the tables are all messed up, text is not centered properly even if i coded it right.
Here is the coding for this page:
PLEASE HELP ME OUT WITH THIS PROBLEM, I NEED TO FIGURE OUT HOW TO MAKE INTERNET EXPLORER TO DISPLAY THE INFORMATION CORRECTLY JUST LIKE FIREFOX?
<style type="text/css">

</style>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR<td></td>
</tr>
<tr>
<td height="31" align="center" valign="middle" class="number">HPI Item #10620<td width="10"></td>
</tr>
</table>
<table width="925" height="326" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onClick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onClick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onClick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onClick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onClick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onClick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onClick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onClick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" height="124" border="0">
<tr>
<td height="320" class="description"><p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center" class="features">Features:</td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td height="526" class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
<td> </td>
<td class="featurebackground">
<ul>
<li class="featurebackground">Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li class="featurebackground">Transmitter Batteries: 8x AA</li>
<li class="featurebackground">Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
</tr>
</table>
<table width="928" height="621" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/ePaymentMethod.jpg" class="policy"><p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p>
<p> </p></td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="220" background="http://www.ehobbyplanet.com/eBay/Layout/eNormalShipping.jpg" class="policy"><p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td height="104" background="http://www.ehobbyplanet.com/eBay/Layout/eInsurance.jpg" class="policy">We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/eReturns.jpg" class="policy">We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</td>
</tr>
</table>
</body>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
Here is my contact information:
Paul
[email protected]

Try this without the border images and it will work in all browsers with increased text size. That's assuming eBay supports embedded CSS styles (which I'm not convinced they do). Inline styles are safer IMHO.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.title {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Title.jpg);
background-position: center center;
font-size: 24px;
font-weight: bold;
color: #FFF;
font-family: Tahoma, Verdana, Arial, Helvetica, sans-serif;
vertical-align: middle;
h2 {font-size:1.7em; color:#000; margin-top:0em; margin-bottom: 2px;}
ul,li {
font-size:14px;
list-style:disc;
line-height:1.5;
font-family: "Times New Roman", Times, serif;
.description {
font-family: "Times New Roman";
font-size: 16px;
line-height: 1.2;
font-weight: bold;
color: #000;
text-align: left;
vertical-align: middle;
border: 4px solid red;
padding: 0 20px 20px 20px;
.text {
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
font-size: 14px;
font-weight: bold;
color: #F00;
text-indent: 2em;
.features {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 18px;
font-style: italic;
font-weight: bolder;
text-decoration: underline;
color: #666666;
line-height: 3em;
.featurebackground {
padding-right: 10px;
border: 4px solid red;
width: 200px;
vertical-align: top;
padding-top: 1em;
.policy {
border: 4px solid red;
margin-top: -2em;
.fsr_style { font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
color: #000000;
background-color: #FFFFFF;
padding-top: 5em;
padding-right: 20px;
border: 4px solid red;
.number {
.policy {
font-family: "Times New Roman", Times, serif;
font-weight: normal;
font-size: 14px;
padding: 0 20px 20px 20px;
</style>
</head>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR</td><td></td>
</tr>
<tr>
<td align="center" valign="middle" class="number">HPI Item #10620</td><td width="10"></td>
</tr>
</table>
<table width="925" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onclick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onclick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onclick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onclick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onclick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onclick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onclick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onclick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td class="description"><h2>Description</h2>
<p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center"><span class="features">Features:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
</td>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
</td>
<td> </td>
<td class="featurebackground">
<ul>
<li>Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li>Transmitter Batteries: 8x AA</li>
<li>Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
</td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Payment Method </h2>
<p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Shipping & Handling </h2>
<p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Insurance</h2>
<p>We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Returns</h2>
<p>We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</p></td>
</tr>
</table>
</body>
</html>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
That's the best solution I can offer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Arabic text not displaying correctly in Win Server 2008 R2

Hi,
We have an .mdb database stored on our Windows Server 2008 R2 server but when we view the contents some of the text has strange characters.
When we view the same db in Windows Server 2003 we do not have these characters. I'm not sure what exactly we need to do to correct this issue..
Any suggestions welcome..

Hi,
Thanks for your post.
When you open a Web page or a text file that contains a string of Arabic characters, the string is not displayed correctly. This issue occurs when the following conditions are true:
The Left-to-Right Override (LRO) Unicode control character is used in the string of Arabic characters.
You specify a font that is not Simplified Arabic Fixed.
Please apply the hotfix below:
Incorrectly displayed Arabic characters in Windows 7 or in Windows Server 2008 R2
https://support2.microsoft.com/kb/976525?wa=wsignin1.0
And check the result.
Regards.
Vivian Wang

Flash movie not displayed correctly in IE 8 on some Windows OS

Has anyone seen this problem?
I'm using CS4 to export a basic flash movie with embed tags pre scripted...
And the issue is that on some OS systems using Vista or Windows 7 and IE 8 as a primary browser, it appears that IE 8 is not displaying the flash banner completely.... its CROPPING it off... This is very strange because the banner works fine in FireFox, IE7,Opera,Chrome but not I.E.8 on some OS systems...
If you google "Flash not displaying correctly in IE 8" you'll get alot of people with the same issues but no real definate fix...
Are there any suggestions as to what i could try?
Do i need different flash embed tags? Or is this a user issue?
Please Advise as soon as possible...
Thanks

I'm sorry, i forgot to explain that I didn't upload the flash published html because it did and produced the exact same results.
The flash published still got cropped off on 1 vista os(I.E 8) running from a laptop and 1 windows 7(I.E. 8) latop os...
Its good to hear that you're able to see it clearly... however in my QA efforts, i've been asked to fix the issue or drop the flash banner all together.
I've tried every which way, i've even converted the embed tags (not uploaded by the way) to a js script and it STILL gets cropped of on 2 ie8 run OS systems...
And now i'm not sure what else to try on my end.
I'm currious if because this is an XML driven flash banner, this may be an issue? But it still doesn't explain why some people can see this in IE 8 as you can and others get a cropped banner like in my screen shot sample.
Again i invite everyone in the forum to take a look at the sample links, as i'd be curious to see who else is seeing this.
By the way "kglad" Thank you so much... please keep the suggestions coming... but everything you've suggested, i've tried.
This is very perplexing. Is this a setting issue? or is there some setting on the user side i'm not aware of? Either way, as usual... the flash developer is blamed so i must find a solution.
Link to flash sample
http://www.extremefx.net/flashie8issue/flashtest.html
Link to screen shot sample on a Vista and Windows 7 running IE 8 browser
http://www.extremefx.net/flashie8issue/ie8issue.jpg
Again... eagerly await feed back from you and the rest of the forum.
Message was edited by: RegGFX

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HTML Form Not Displaying Correctly in Outlook 2010 (Exchange 2013)

Hello,
I have recently migrated to Exchange 2013. Clients are still using Outlook 2010. There is an application that automatically sends an HTML form by email for the users to fill in. The form consists of radio buttons, text areas and drop down list. However,
in Outlook 2010, the form is not rendered properly.
When I clicked the "If there are problems with how this message is displayed, click here to view it in a web browser" link, the email is opened in
IE and the form is displayed correctly.
I also tried opening the same email in other clients, such as Thunderbird, Apple Mail Client and in mobile phones - the form is displayed correctly. I wonder
why it fails to do so in Outlook 2010. The user mentioned that this does not happen in Outlook 2003 and prior to migration (I used Exchange 2010 previously). I have also tried using OWA, but the form does not display correctly
Any help?
Note: I can't attach any images or links as it is mentioned that my account is not verified yet. I will post some screenshots when it is possible to do so

Hi
Outlook 2007 or newer use Microsoft Word for their HTML engine.
You can refer this page http://www.campaignmonitor.com/css/ shows
many things that do not work in different clients.I think Someone needs to re-code
the HTML form to make it work in the current versions of Outlook. You can try formatting with text and HTML and see the results.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Slideshow images will not display correctly on mobile phone

Hello,
I have a website which I used several slideshows, in areas I would typically just used a rectangle and fill with photo. This was done because my client wants to be able to update the images through business catalyst. Unfortunately, when viewed on a mobile phone (I am using iOS 7) the slide show images do not display correctly.
What can be done to fix this? Is there another workaround I should try?
Thanks!

Hi Nicole
The images that you are using on parties page are stretched , if you check the image frame you can see that.
As a result the image frame is stretched over the side image , they are not showing properly. If you resize from Muse end , then also it would not be fixed because Muse remembers the image size as you have inserted and when viewed , Muse stretches the image to original size as how it was inserted.
Please resize the images outside Muse , use any image editor like Photoshop and then use the exact dimension of the image frame on page.
This would resolve the issue.
Thanks,
Sanjit

Https sites not displaying correctly

Here's an interesting problem thats cropped up on a couple of machines here. Hopefully someone else has found the cause!
The problem is that some HTTPS sites are not displaying correctly. We have seen this with vimeo, and with wetransfer. I have included a screenshot of the issue on both safari and on chrome.
Cross checks i've been able to verify:
another machine with the same OS (10.8.5) looking at the same sites is fine and another running 10.9.4 is not, so this appears not to be OS or browser version related.
this does not happen in a different user account on the same machine, so the issue appears to be in the user home.
this happens across all browsers in this user account. so it appears to be a supporting technology or cache going wrong rather than a specific browser.
I have emptied the user preferences, and cache folders with no change.
Clearly i can sidestep this by creating a new user home, but that isn't actually getting to the bottom of what is going wrong, and it would be better to identify the issue!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Websites not displayed correctly

Hi,
since i updated to Safari 6.0.2, many websites are not displayed correctly anymore. instead of pictures i see a blue question mark, sometimes the whoe layout is a mess. this concerns multiple websites, alse like facebook or youtube. when i refresh, it mostly orks, so i think it´s not a plugin-issue
Curiously, also in Mail, some Emails are not displayed correctly.
Thank´s for any suggestions or ideas how to solve that.
Christoph

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Non-breaking hyphen not displayed correctly

The non-breaking hyphen (\u2011, &#8209) is not displayed
correctly - the wrong glyph is shown.
To reproduce, do the following:
1. Start the TLF demo editor
http://labs.adobe.com/technologies/textlayout/demos/
2. Import the markup below
Results:
- Line wrapping is correct: no line break at the hyphen
- Times New Roman on Windows does have the glyph defined - it
should look like an ordinary hyphen.
This was seen in Build 3291.
Cheers
David
Markup:
<?xml version="1.0" encoding="utf-8"?>
<flow:TextFlow whiteSpaceCollapse="preserve" xmlns:flow="
http://ns.adobe.com/textLayout/2008"><flow:p
marginRight="5"><flow:span fontSize="60">
2011 non-breaking hyphen Macro‑media
</flow:span></flow:p></flow:TextFlow>

Hi Chris,
you're right, Times New Roman does not contain the glyph. I
was seeing 2013 whlie I type 2011 -- my mistake, sorry.
However, it's a pity non of the OTFs implement this glyph
(also Myriad Pro doesn't, for instance). Open Office 3 seems to
replace it by a hypen (which is greyed), and InDesign CS4 also
seems to replace the character and does no word-wrap at this
position.
Of course it would be very convenient if Flash could handle
it the same way..
Btw, character map is the same as my "chart table
application", at least it's my translation from the German
"Zeichentabelle". :-)
So, sorry again for the confusion...
david

Images inside pop-ups in CHM not displaying correctly

I am generating a CHM using RoboHelp 10 on a Windows XP machine.
I have a few pop-ups in some topics. These pop-ups contain screen shots. After generating the CHM, when I click the pop-ups to view the screen shots, they are not displayed correctly. That is, half of the image does not appear and there are no horizontal scroll bars either to scroll. This happens for pop-ups that appear on the left side of a topic. The images inside pop-ups that appear to the right side of a topic appear fine when clicked.
The help file was originally created using RH 7. I upgraded the source files to RH 10 successfully and there were no errors during the upgradation.
I even tried generating the CHM on other systems with RH10 and the same system configuration as mine but ended up with the same results. I assume there is some compatibility issue maybe between RH 7 and RH10.
Looking forward to any helpful insights here as this is pretty urgent at the moment for me to resolve the aforementioned issue at the earliest.

Hi Rick,
Thank you for the response. Alas, updating the DHTML effects doesn't help. In the project that am working, I have used hyperlinks that are marked to be displayed as auto-sizing pop-ups.
I also tried editing the eHlpDhtm.js file as mentioned in the thread here, https://forums.adobe.com/thread/1297423#expires_in=86399993&token_type=bearer&access_token =eyJhbGciOiJSUzI1NiIsIng1dSI6I…. But that was of no avail either.
Do you have any other insights here?
Regards,
Anamika
P.S. Am using RH 10.0.1.292.

Web certificates are unrecognized. Web pages do not display correctly.

Web certificates are unrecognized. Web pages do not display correctly.
Web pages post as mostly text but links do not work. for example youtube.com
Upload
Change
Creator Studio
Add account Sign out
Search
What to Watch
My Subscriptions
Music
What to Watch
My Channel
My Subscriptions 5
History
Watch Later 27
Playlists
More
Cars
Favorites
Bob 2
Robin
Liked videos
Subscriptions
Benz lu
This Connection is Untrusted
You have asked Firefox to connect securely to smf.crm.red.com, but we can't confirm that your connection is secure.
Same problem in Firefox.
Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is trying to impersonate the site, and you shouldn't continue.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Quiz Results Analyzer results not displaying correctly

Similar Messages

Maybe you are looking for