Quiz with Endless Loop

I am trying to create a quiz that allows the user to retake,
but only allow 2 attempts. When I create the quiz I have the "On
Failing Grade" set to jump to the slide beginning the quiz. I also
have it set to 2 attempts. "On Passing Grade" set to continue with
the presentation. After the first failure, the quiz works just like
it should. It goes back to the beginning of the test and all of the
questions function just as they should. The problem is on the
second failure, the continue button goes to the beginning of the
quiz again and goes through the quiz again only this time in review
mode but next time when it gets back to the results slide you have
continue and review, just as always and continue always takes you
back to the beginning of the quiz. To be expected I guess, but not
what I want it to do. Does anyone know a workaround for this or can
tell me what I'm doing wrong? Any help is much greatly
appreciated.

Similar Messages

Debugging fails to be activated in SM50 with endless loop

Hi Experts,
I want to debug a inbounding mail processing and configure the handling class in SO50. Then I set a endless loop in the class method.
Then when a new mail coming, Sever will hold a process of my class method. But when I go to sm50 program->debugging. I will get a popup window with message"Debugging program?" Then I press Yes. Then, no thing will happen. No debug screen show up.
Is there any requirement to be set before we use the debug in SM50?
Or for some cases just like mine, the user of SAPCONNECT should have some authorizty?

Hi,
Once i faced this problem and i did not have authorization to debug.
As you have mentioned, I dont think so you have authorization to debug. Please run T code SU53 and check.
If not take help of your Basis team and get it resolved
Shiva

Is there a phone number to call Adobe. I go around an endless loop pressing their contact info tabs? Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Ai

Is there a phone number to call Adobe. I go around an endless loop pressing their contact info tabs? Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Air. It was working fine - I was using LR and a message came on the screen that said something like the memory was dangerously low. I stopped and tried to delete LR files. I couldn't do it. I closed the program and tried reopening and got the message that there is not enough memory available to open LR. I contacted Apple. They spent a half hour on the phone with me and eventually told me they didn't know how to help. The tech said that LR had gobbled up all the memory and said I should contact Adobe and ask where and how my photo files are stored and to delete them. I have several back-ups. Thanks - Arthur

This sort of error message only comes up for Lightroom when your hard disk is full. Indeed this has nothing to do with internal memory as that will be intelligently be dealt with. If you have a mac Book Air that is not so surprising as the cheapest versions come with very small hard disks and if you shoot raw with any recent camera, you'll fill up your hard disk very quickly and you can probably only store a few months of pictures if you are a typical photographer. So the bottom line is that you need to create some room on your hard disk. You should move some of your originals to an external hard disk. You can also delete some of your backup copies of your catalog file that Lightroom automatically generates every few days and that quickly gobble up hard disk space. So first figure out how full your hard disk is. To see that, go to the apple menu, hit -> About this Mac -> More info->Storage. You should see your internal hard disk on top and you'll find that it is almost entirely full with photos. Now find your Lightroom catalog file using Finder. It is usually in a folder in the Pictures folder in your home directory. You should see a Lightroom 5 Catalog.lrcat file, a previews file and a folder called backups. Inside the backups folder, you'll find a lot of subfolders. They have names that show the dates the backups were created. If you have backups of your entire hard disk, you can delete these backups when they are older than a few months. I usually only keep the last 4 around. Just drag the folders into the trash can on the dock on the bottom of your screen and empty the trash. This will probably free up enough space that Lightroom will already run again. Now start thinking about where you will want to store older images. If you have a good USB3 or Thunderbolt hard disk that is probably the best option. There is a video here by Adobe that has some instructions on how to do this: Is Your Hard Drive Full? Here’s How to Move Images to Another Drive in Lightroom. « Julieanne Kost's Blog If that doesn't work because you don't have enough hard drive space to run Lightroom yet, here is another set of instructions to move your files using the finder to the other hard disk: How do I move only my photos to another hard drive, leaving the catalog where it is? - The Lightroom Queen. If you follow that, as soon as you confirm all your images are on the new hard disk, you can delete them from your internal one. She is not so clear about that part but if you don't delete the originals that you moved off you don't free up space. You should move the folder structure over to the new hard disk and then reconnect the folders in Lightroom. That should make it refind all your images.
That said, if you are uncomfortable with the computer in itself, your best bet is to find a local photography club. There is invariably a Lightroom savvy person in there that could help you move your files. That might be your best bet if you are uncomfortable moving these yourself. A general mac savvy person like you would find at an Apple store or so generally will not be able to help you with this except when they are photographers themselves and know Lightroom. You might get lucky with that.

Mac 10.6.8 ical "server responded with an error" endless loop

I get an endless loop. "The Server Responded with an Error "--click OK. Next window "The Server Respnded with an Error"--whether click "go offline" or "return to server" takes me back to first window, ad infinitum. Can't change anything on calendar; cannot access ical Preferences. basically cannot do anything except Force Quit, whether logged into my account or my wife's [registered to my wife's yahoo! email].
Also cannot synch calendars now between imac, iphone, and ipad like we could in beginning. Using 10.6.8 because some of my peripherals not compatible with later.
This problem just started a couple of days ago [the server problem freezing the calendar, it hasn't been working properly for awhile and the calendar synch was lost when a friend upgraded the iphone software.]
What can I do to restore 1] the functionality of the ical? and 2] synching the imac, ipad, and iphone icals?

I read another response to a similar question posted a couple of years ago. I turned off the Wifi, restarted iCal offline, and that eliminated the message. However, as soon as I turned on the Wifi the message again appeared, the app froze requiring a Force Quit, and the game is still afoot. NO SOLUTIONS ANYONE?

HT204053 I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.

I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.
How do I enable my new device with an existing ID - I do not need to change the password for the millionth time!
None of the FAQs (or the Community choices below) address new devices, they are all about APPS and iCloud stuff.

If it is an existing iCloud ID, you should be able to just go to Settings>iCloud and sign in with it.

Developing: Endless loop in Adobe Bridge with and Adobe Drive CMIS Connector

Hi
Currently I’m implementing a CMIS-Server for the dam system of my company, using the apache chemistry framework. One of the main requirements is that adobe drive works with it.
At the moment I implemented only the navigation services (getChildren, getObject, …) and the repository services and test them against adobe drive. It’s already possible to navigate through folders and read assets with ad4 and the finder. So 3 days ago I installed adobe bridge (CS6) and test my server again.
My test environment is very easy.
root(1 object)->test1(0 objects; empty)
First I’m opening my repository with adobe drive and then I switch to bridge and connect it. Bridge shows me the folder test1 with no errors. So I double-click it and now bridge is in an endless loop. The notification switch between ‘Keine anzuzeigenden Elemente’(No elements to show) and ‘Einen Moment bitte, die Suche läuft …’(Searching, please wait …). This only happens in bridge. When I open the folder with the finder it just works, without the loop.
So I logged all requests, which were send by adobe drive, and get this list.
Connecting with adobe drive
getRepositoryInfos
getTypeChildren (null) -> all basetypes
getTypeDecendants (cmis:document)
getTypeChildren (null) -> all basetypes (Why two times?)
getTypeDecendants (cmis:document) (Why two times?)
getRepositoryInfos (Why two times?)
getObjectByPath (/.hidden)
getObjectByPath (/.hidden)
getObjectByPath (/.hidden) (Why so often?)
getObjectByPath (/DCIM)
getObjectByPath (/mach_kernel)
getObjectByPath (/.Spotlight-V100)
getObjectByPath (/.metadata_never_index)
getObjectByPath (/.metadata_never_index_unless_rootfs)
getObjectByPath (/.metadata_never_index)
getObjectByPath (/mach_kernel)
getObjectByPath (/.metadata_never_index_unless_rootfs)
getChildren (cmis:folder,0) (rootfolder) returning only one element (test1)
getObjectParents(cmis:folder,127) (test1) returning the rootfolder
getObjectByPath (/.hidden)
getObjectByPath (/mach_kernel) …
Open the Cmis repository in bridge and doubleclick the repository
getChildren (cmis:folder,0) (rootfolder) returning only one element (test1)
getObjectParents(cmis:folder,127) (test1) returning the rootfolder
Then I double click the test1 folder
getObject(cmis:folder,127)(test1)
getChildren(cmis:folder,127) -> empty list
… (endless loop)
I already checked getObject and getChildren against a reference implementation (FileShare Repository of apache Chemistry) and it returns exactly the same structure. Only the name and the timestamps are different. So my second though was to check the repository capabilities and as well they are both equal. Now I’m a little bit desperate because I spend already 3 days in try and error bugfixing but nothing worked. So here are my questions.
Is there a logfile for bridge because I thing this refreshing happens after an exception. I already checked the adobe drive log and it contains only asset not found errors for (e.g mach_kernel …).
In which circumstances does bridge reloads a folder?
Debugging of adobe drive: I already read http://forums.adobe.com/message/3928595 but it doesn’t work in AD4 any more, I only get info/error/fatal messages.(I changed the log4j config files in AD4ServiceManager.) Does something changed or did I forget something?
Why does AD4 make 2 or more times the exact same request? (Look table above).
I hope my English is good enough to understand.
Thanks

After two months I'm a little bit smarter so I can answer some of my question by my own.
No there is no logfile for bridge, but I was able to debug the scriptcode from the ad plugin, which is installed in bridge.
If an error occures in the plugin
I was able to decompile the cmis connector. That helps a lot when ad logs with weird exceptions.
Because AD maps the actions of the filebrowser(finder,explorer) to cmis and this one does sometimes the exact action two or more times.
Unfortunately is wasn't able to fix my main problem, but I found a workaround to use cmis in bridge. I deactivated the ad plugin in bridge and after that action, bride display the cmis volume as normal volume. Sadly some actions like to manage relationships etc. are with this workaround not usable but for me this is alright.

Firefox goes into an endless loop with blue circular cursor at various times when trying to load a file.

Firefox hangs up at times when I try to download a file. The hangup is evidenced by the Windows 7 spinning blue cursor going into an endless loop. The only way out if it is with "ctrl/alt/del". Sometimes I can cancel, and Firefox will be normal again, and other times I have to go on into "Taskmaster" and stop the process.

Similar problem. An Email includes a URL, clicking on brings up a message including "click here" to link to an additional site.
This bring up either the Windows7 rotating cursor and/or the message "stopped".
I copied the "click here" address (another URL) and pasted it into the IE8 browser, which succeeded in displaying the information. It worked, to my surprise but it is clumsy. Do I have to remove Firefox (3.6.6) and use only IE8?
Another system on my home network, using XP Home SP2, and FF 3.6.4 works fine in the same circumstances

Login with mac gives an endless loop

I use Adobe FormCentral with my PC:s since many year. Now I have got a Mac and when I try to login from the main page I get an endless loop in the address field. What to do then?

huh?????????????????????

Script for saving GIF with Animation Loop Endless

Hi,
I am searching for a way to use "save for web" in a Photoshop CC Script.
I already found how to use the "save for web" using Script, but now i am stuck, because i cannot find any information on how to set
that the animation, i want to save as a Animated GIF File, can be set to loop endless.
I already tried to search in all the docs i found about scripting, but there is not a single information about saving gif with animation loop endless...
thanks,
Philipp

When you do use "save for web" and select GIF, on the bottom right, the loop mode can be selected. But i think i wouldn't matter to me if it's being set before saving the image.
I already tried to run the script, but somehow
"charIDToTID('Ordn')" for example won't run. Is this the same as charIDToTypeID? because i found charIDToTypeID is a function, but charIDToTID is not...
also the third line from the end, one of the functions seem not to work, i think....
But already you given me a real good answer to what i may try to search for, since i did not actually know that this is set within the timeline, i always used the option within the "save for web" dialog on the bottom-right.
I Solved my own problem ...
I just made Photoshop CC with a script log everything, then gotten to this:
function setLoopForever() {
var idsetd = charIDToTypeID( "setd" );
    var desc5 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref2 = new ActionReference();
        var idanimationClass = stringIDToTypeID( "animationClass" );
        var idOrdn = charIDToTypeID( "Ordn" );
        var idTrgt = charIDToTypeID( "Trgt" );
        ref2.putEnumerated( idanimationClass, idOrdn, idTrgt );
    desc5.putReference( idnull, ref2 );
    var idT = charIDToTypeID( "T   " );
        var desc6 = new ActionDescriptor();
        var idanimationLoopEnum = stringIDToTypeID( "animationLoopEnum" );
        var idanimationLoopType = stringIDToTypeID( "animationLoopType" );
        var idanimationLoopForever = stringIDToTypeID( "animationLoopForever" );
        desc6.putEnumerated( idanimationLoopEnum, idanimationLoopType, idanimationLoopForever );
    var idanimationClass = stringIDToTypeID( "animationClass" );
    desc5.putObject( idT, idanimationClass, desc6 );
executeAction( idsetd, desc5, DialogModes.NO );
Works perfect!

Problem with unwanted endless loop while reading a file

Hi everyone,
i got stuck with a class, that reads all words out of an input file, counts each file's frequency and prints out a list with words and frequency.
Everything works fine as long as i use a In.read() method included in a example class provided by the book i use to learn java. But this method will not be allowed to use in the exam, even if the whole lecture at uni based on it. Well, not that much a problem, if i would be able to replace it by a FileReader or something like this.
Problem: The test file (input.txt) contains a phrase like "This is a test text to count the words included in the test text". Shoul return all unique words and their frequency. As my pc crashed everytime i started the class, i found out that my failure has to come from the readWord method. It reads the first word in an endless loop (which seems to be the reason for the crashs) and is not willing to continue reading the next word after it returned the first to the main method. Instead it resets and starts from the beginning. I stripped of any additional processing methods and included a "system.out.println()" in order to narrow down the failure.
I really don't understand this, because read() reads character after character and it is added to the buffer as planed and i don't see any reason why it resets to 0. I can use the same code (apart from the file reader and exception handling stuff and the "!= -1" check) with the In.java-class and it works.
Here comes the code. Any help would be greatly appreciated.
Greg
import java.io.*;
public class WordCount {
      * @param args
     public static void main(String[] args) throws IOException {
          //reads first word out of the input file
          String w = readWord();
          while(w != null){
               //test output to verify anything is read
               System.out.println(w);
               //next word to read
               w = readWord();
          //close input stream
          System.in.close();
     static String readWord() throws IOException{
          FileReader eingabestrom = new FileReader("input.txt");
          StringBuffer word = new StringBuffer();
          int gelesen;
          /*read first character
           * -1 if no text in the input file. In this case,
           * both while loops are skipped and "null" is returned
          do gelesen = eingabestrom.read();
          //skip blanks
          while(gelesen != -1 && !Character.isLetter( (char) gelesen));
          //read all characters of a word and append it to the "word" stringbuffer
          while(gelesen != -1 && Character.isLetter( (char) gelesen)){
               word.append( (char) gelesen);
               gelesen = eingabestrom.read();
          //if read was successful, convert buffer to string and return it to main.
          if(word.length() > 0){
               return word.toString();
          //if read was unsuccessful, return null
          }else{
               return null;
}

Thank you! :)
Works perfectly, i do understand most of it and i discovered the little mistake that prevented it from starting ;)
Set<Map.Entry><String,Integer>> set = tm.entrySet();Needs less than half the code i used before :)
Thx again
Greg

Odd Endless Loop with Explorer 8 (pc)

I have many of these tags on a site...
<meta http-equiv="refresh" content="0;page2.php">
It just goes into an endless loop but stays on the original page - never going to page2.php
then i see that it seems to work with the absolute URL but not the local relative one...
<meta http-equiv="refresh" content="0;http://domain.com/page2.php">'
Q : before I change many of these - is there any other workaround to keep using the relative link instead?

I found it - adding url= did the trick ---- url=page2.php
<meta http-equiv="refresh" content="0;url=page2.php">

Endless loop when clicking on ADF TreeTable Node with multiple Parents

Using Jdev 11.1.2.2.0.
I have been using the ADF Tree Table to render a parent/child relationship table(using EO's and VO's); this table allows a child node to have many parents. I've followed the example from Code Corner #32 "How to create a tree table from a single View Object and how to access selected rows" but my example is a little different. I have a Hierarchy Table that lists it's TopNode and then I have a Relationship (parent/child) table that includes the relationships for that hierarchy. I've created the ViewLinks between the Hierarchy VO and the Relationship VO and everything shows up fine in the ADF BC Tester.
The tables look like the following (Note: the node 5 has multiple parents (4&3)
Hierarchy Table:
ID NAME TOPNODEID
1 HIER1 1
PARENTCHILDTABLE
PARENT_ID CHILD_ID
1 2
1 3
2 4
4 5
3 5
-1 1
The View Links I have setup are the (TopNodeID to ChildID... 1 to 1) as well as the (Child_Id to Parent_ID.. 1 to *).
I added a tree table to a jsf page; I setup the bindings correctly with the Hierarchy vo as the top level object and the relationship VO as the parent/child (self referencing) table.
However, when I start expanding some of the nodes at runtime in the JSF page and when I click on the child 5 an hour glass appears and it seems to be in an endless loop. Has anyone seen this before or anyone know why this gets into an endless loop.
Edited by: user623583 on Aug 21, 2012 7:26 AM

No exceptions occur but I was able to turn on logging (oracle.adf*) and this shows up. This is only a portion of what gets logged as it seems to log the same thing over and over while in the endless loop. The loop is intermittent too; it doesn't occur all the time. It seems to occur when I click on one of the duplicate nodes OR try to expand one of the duplicate nodes and/or one of their parents.
<UIXRegion> <processEvent> RegionModel associated with component client ID: pt1:pt_region11
<UIXRegion> <processEvent> RegionModel associated with component client ID: pt1:pt_region12
<UIXRegion> <processEvent> RegionModel associated with component client ID: pt1:pt_region13
<UIXRegion> <processEvent> RegionModel associated with component client ID: pt1:pt_region14
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext()
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext() - model var was being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext()
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = value
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext() - model var is being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to ptb1
<UIXInclude> <_setupIncludeContext> UIXInclude._setupIncludeContext() - Client ID: pt1
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext()
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext() - model var was being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext()
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = value
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext() - model var is being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to ptb1
<UIXInclude> <_setupIncludeContext> UIXInclude._setupIncludeContext() - Client ID: pt1
<UIXInclude> <tearDownChildrenVisitingContext> UIXInclude.tearDownChildrenVisitingContext() - Client ID: pt1, called by oracle.adf.view.rich.component.fragment.UIXPageTemplate.tearDownChildrenVisitingContext at 275
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext()
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext() - model var was being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext()
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = value
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext() - model var is being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to ptb1
<UIXInclude> <setupChildrenVisitingContext> UIXInclude.setupChildrenVisitingContext() - Client ID: pt1, called by oracle.adf.view.rich.component.fragment.UIXPageTemplate.setupChildrenVisitingContext at 249
<UIXInclude> <_setupIncludeContext> UIXInclude._setupIncludeContext() - Client ID: pt1
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext()
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext() - model var was being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext()
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = value
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext() - model var is being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to ptb1
<UIXInclude> <_setupIncludeContext> UIXInclude._setupIncludeContext() - Client ID: pt1
<UIXInclude> <tearDownChildrenVisitingContext> UIXInclude.tearDownChildrenVisitingContext() - Client ID: pt1, called by oracle.adf.view.rich.component.fragment.UIXPageTemplate.tearDownChildrenVisitingContext at 275
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext()
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext() - model var was being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<DCBindingContainer> <internalRefreshControl> Lifecycle:BindingContainer.refresh type:prepare for:oracle_epm_view_view1PageDef
<DCBindingContainer> <internalRefreshControl> Lifecycle:BindingContainer.refresh type:prepare for:ptb1
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<ADFLogger> <begin> Region refresh
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<ADFLogger> <end> Region refresh
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<FacesPageLifecycle> <getToken> ADFc: State-token for 'oracle_epm_view_view1PageDef' has been restored and is not null.
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ServletADFContext> <findApplicationScopeMap> The applicationScope Map returned
<ADFContext> <getADFFacesViewScopeMap> oracle.adf.view.rich.context.AdfFacesContext used to get ViewScope
<FacesPageLifecycle> <getToken> ADFc: State-token for 'oracle_epm_view_view1PageDef' has been restored and is not null.
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = rendered
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext()
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = value
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext() - model var is being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to ptb1
<UIXInclude> <setupChildrenVisitingContext> UIXInclude.setupChildrenVisitingContext() - Client ID: pt1, called by oracle.adf.view.rich.component.fragment.UIXPageTemplate.setupChildrenVisitingContext at 249
<UIXInclude> <_setupIncludeContext> UIXInclude._setupIncludeContext() - Client ID: pt1
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = true and key.getName() = rendered
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext()
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext() - model var was being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext()
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = value
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext() - model var is being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to ptb1
<UIXInclude> <_setupIncludeContext> UIXInclude._setupIncludeContext() - Client ID: pt1
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext()
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext() - model var was being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext()
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = value
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext() - model var is being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to ptb1
<UIXInclude> <_setupIncludeContext> UIXInclude._setupIncludeContext() - Client ID: pt1
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = true and key.getName() = logoImagePath
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = true and key.getName() = logoImagePath
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext()
<UIXPageTemplate> <_tearDownPageTemplateContext> UIXPageTemplate._tearDownPageTemplateContext() - model var was being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to oracle_epm_view_view1PageDef
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext()
<UIXInclude$ContextualFacesBeanWrapper> <getProperty> UIXInclude$ContextualFacesBeanWrapper.getProperty() - _inContext = false and key.getName() = value
<UIXPageTemplate> <_setupPageTemplateContext> UIXPageTemplate._setupPageTemplateContext() - model var is being managed by the component.
<LoggingRequestWrapper> <setAttribute> Setting the value of 'bindings' to ptb1
<UIXInclude> <_setupIncludeContext> UIXInclude._setupIncludeContext() - Client ID: pt1
<UIXInclude> <_tearDownIncludeContext> UIXInclude._tearDownIncludeContext() - Client ID: pt1

I erased my HD with the wrong disc now I am in endless loop.

I used the wrong disc to wipe my 2007 iMac with Leopard and was successful wiping it clean, but now it won't let me install OS X again (It says it can't install this version of OS X on the machine) and I am in an endless loop. I am unable to eject the disc and put the right one in. Is there some sort of over ride for this??

Restart the computer while pressing the mouse button or eject key.
(116183)

Icloud email stopped, now in endless loop with icloud

Help! I have a Macbook pro, running, Mac OSX 10.7.5 and browsing with Safari 6.1.6. Earlier today my account started asking me for my password. So I attempted to go to icloud and it asked for the password it said that I needed to change the password. I did so and then went back to icloud and attempted again. It then told me I needed to change the password... ENDLESS LOOP! Argghhh... Someone please help!

I don't know whether this is confined to address book entries; I get the same kind of thing with calendar entries, but only on one of my Macs. I regularly sync an iMac G4 at home, an iMac G5 at work, and a PowerMac G4-450 at my daughter's house, and the PowerMac is the only one that has this problem. All 3 systems are running 10.4.10 and have tons of memory and disk space. All systems are set to sync with .Mac once per hour. I sync Calendar, Address Book, Bookmarks, Keychains, Yojimbo, and MacJournal. The symptoms are:
* The two iMacs stay in sync with no intervention.
* The PowerMac does not sync automatically as it is supposed to. When I sync it manually, I always get a list of Sync conflicts.
* When the Conflict Resolver comes up, it always has some conflicts in calendar or address book entries. I tell it to use .Mac for all similar situations, click OK, and then the Conflict Resolver eats all available CPU time and shows in Activity Monitor as non-responsive till I kill it.
I have tried using Syncrospector to reset the sync state, do a slow sync, etc. on this machine to no avail. Totally baffled... Anyone else see this or know how to break the deadlock?
JEH

Windows Update in Endless Loop of 'Installing updates" and "Undoing changes" on New Windows 8.1 Pro Install

I am setting new Windows 8.1 Pro computers, and am installing Windows 8.1 Pro to bare drives. Everything goes fine until Windows Update starts installing updates, and then the computer goes for hours installing updates, and then "We
could not complete the updates Undoing changes". It's an endless loop. It seems to be the same 38 updates. This is a recent phenomenon. I have not run into this until the last week or two on several new computer installs.
Again these are brand new installs, so something is clearly wrong with the Windows updates.
If anyone can please tell me how to avoid this, it would be much appreciated.
Michael

Hi Michael,
" This is a recent phenomenon"
Have you made any modifications to the machines ?
To resolve this issue ,running the built-in troubleshoot tool is a very good beginning .It will automatically diagnostic the windows update components and check the configurations for us .
Control Panel\All Control Panel Items\Troubleshooting\Fix problems with Windows Update
If there are antivirus software installed in these machines, please turn off them temporarily to have a check.
The command line included in the link as S.Sengupta posted is very useful and convenient to repair the windows corrupted files .We can have a try .
"sfc /scannow" ,"DISM.EXE /online /cleanup-image /restorehealth "
We also can check the windowsupdate.log for more information to troubleshoot this issue .
Run "windowsupdate.log"
If you have trouble in analyzing the log ,please upload them to the OneDrive and paste the link here .
Best regards

Quiz with Endless Loop

Similar Messages

Maybe you are looking for