Quiz works until uploaded to LMS, very strange

In Captivate 3, if we preview the project, answer the quiz questions, they respond with the appropriate correct/incorrect response. However, when it's been uploaded to our lms, eLogic, sometimes it reports a correct answer as incorrect and vice versa. It's happened on two pc's... We had used the copy question option to pull the slides into this project, and my next step will be to delete them and recreate them, but other than that,I can't think how to troubleshoot. Any ideas?
Thanks in advance!

No worries. My co-worker previewed it before uploading it to the LMS and the quiz worked. After uploading it, she went through the course and that's when she found the question feedback indicated answers that were correct to be incorrect. When we re-opened the course and took the quiz again, the question feedback changed and indicated that the correct answers where indeed correct. If I had not seen it for myself I would not have believed it. But there it is.

Similar Messages

Hide Playbar In Quiz Works -- until you go back

I have a tutorial with a few knowledge checks (quiz questions). In order to make sure the user does not just skip by the quiz question, I checked the disable playbar in quiz box. This worked like a charm, until I clicked the Back button to go back and look at the quiz question after it had been submitted.
This quite effectively stopped both forward and backward navigation, as I cannot re-submit any responses, and the playbar is disabled, so I cannot move forward or backward.
Any suggestions?
Thank you!
Jennifer
Manager, Instructional Design

Hi Jennifer,
I suppose you deleted the Next button on the Question slides? Have a look at this blog post about the question slide design:
http://forums.adobe.com/message/6024141#6024141
If you have multiple attempts on Question level, those attempts are 'closed' when you leave the question slide. Going back to that question slide will never allow you to re-submit a question, only retaking a new attempt on Quiz level will clear all answers and allow then a new attempt when getting back to a question.
The Next button, that doubles as a Skip button during question attempt can be confusing to the user, tempted to click on that button instead of the Submit button. Perhaps that is the reason why I recommend in the post to hide the Next button under the Clear button, but of course going back to a question will not show that Next button, only during Review the Clear button will disappear to let the Next button visible that was hidden under Clear.
Good practice if you are hiding the Playbar is either:
to uncheck the option 'Allow Backward movement' in the Quiz settings
to leave the Next button on the Question slides visible (and explain the user that he has to click Submit to enter an answer)
Lilybiri

Module with cpvc slides not working after uploading to LMS

Everything works fine when previewing, but when it's uploaded to our LMS, it fails to load the video but continues to show the objects (shapes, text boxes) in that video slide.

Did you also upload the js file to the directory indicated in the html code...
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
I don't see that file if I try to link to it, but that your swf is showing at all without that file is a bit of a wondering.

Camera Zoom stopped working - trackball does nothing. Very strange fault.

I just came to take a photo using my Curve 8900 still shot camera feature.
Normally moving the trackball towards 12 o clock position zooms the shot in slightly
and moving it to the 6 oclock position zooms back out to 1:00x
But today I noticed it doesn't work at all. The trackball functions perfectly for scrolling up and down menu lists.
Also it works properly in all directions when zooming an existing photo.
It's just that the zoom function when aiming a shot to take the picture has just ceased to function.
Makes no difference what resolution it's set to. I have mine set to Superfine and 2048 x 1536 pixels and Flash and White Balance both set to Automatic. I can't even make a key press substitute for zoom such as Z as that doesn't bring the function back.
Can the trackball stop working in the camera but be working in all other applications?
I'm mystified by this one.
Hope someone knows what's happening here.
Plado
Laurie Prior
Solved!
Go to Solution.

Dear Plado (That's me!)
Have you tried switching the phone off and back on again as in a Reboot?
Yes I have tried that but it made no difference.
OK have you tried turning off and taking the battery out and doing a cold boot?
No but I will do and see if it makes any difference!
Did it work ?
Yes it did, and the zoom is now back working again and shows a zoom level from 1.0 to 2.0 in .25x increments.
Well I never ! Who'd have thought it?
I'm still none the wiser as to why it needed a cold boot or why it got stuck without prompting from me.
It's just one of those things. A sort of a blob, with eyeballs that throb, just one of those things !
So thanks to anyone who felt like replying to this, the problem is solved but I'd still like to know why it stopped working.
Plado
Laurie Prior

Photo stream works very strange

Photo stream works very strange. It sync photos in different order or don't sync some photos. I have different numbers of photos on my devices - 120 on iPhone, 183 on iPad, 160 on another iPad. What nonsense????

Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
article was updated on Oktober 28, after new iphoto came out, but sometimes they running late.
http://support.apple.com/kb/ht4486

Left mouse controls not working... very strange

I don't believe this is unique to R40 so any help would be appreciated
I have just installed new hard drive and now the left track point and ultranav left mouse does not work. If I go to
mouse>ultranav> settings> buttons> left click and select jump to start it works until standby power off or logon screen. So
again it works until any of the above and then I need a usb mouse to re enable the left mouse control. I do not believe it is a
hardware issue as all 3 left click methods will work until standby etc. i have re-installed latest drivers and am now considering a
reinstall of Windows XP.
Any suggestions???
R40 2723

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

A Very Strange Post Update Problem

Hi guys, new to the forum here, wondering if I could get some help with a most disturbing problem...
Off the bat, I use a ppc Mac G5 running 10.4.11. I use this for Music production, and general music listening in my studio. For Audio I use pro tools HD 7.3 (as well as logic 8), with a digidesign 192 IO interface, and run most ofmy audio thru that. Now that we have that out the way... I normally dont agree to updates, as I would not like to upset a balance thats been working perfectly for me for some time, but 2 days ago, one of my assistants was using the computer and agreed to the latest update for Itunes, quicktime, and logic (but not the security update). Immedietly after the update finished (during which he said the quicktime update crashed), the system started going haywire, pro tools was shutting down, itunes wouldn't open, the like... Well after uninstalling and reinstalling itunes and quicktime, all order was restored, except for one AWFUL problem.. the sound coming out of any program BESIDES pro tools (itunes, logic, toast) is very strange, as if its coming thru very cheap speakers. I've run itunes through both the digi interface and the standard sound card (it has the same problem), and checked the EQ settings (flat), my sample and bit rates are straight... I have no idea! if anyone could offer some insight, It would be much appreciated! Thanks!!

HI and Welcome to Apple Discussions...
It's possible there's an underlying problem with your hard drive.
Insert the installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Also, make sure you have sufficient drive space. Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. Make sure there is at least 10% available disk space, 15% is better.
If the drive appears to be ok and you have enough available disk space, you could try the 10.4.11 combo update available here. http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
Make sure and run Disk Utility and repair disk permissions BEFORE and AFTER the installation.
Quit any open applications/programs. Launch Disk Utility. Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac.
Carolyn

Premiere Pro CS5.5 -very strange issue with the color tones and Preview-

I deal with a very strange and not usual problem in Premiere Pro CS5.5 (also the version CS5). What I try to do is just a simple color correction. The problem occurs when I try to use Three Way Color Corrector but it happens with Fast Color Corrector also.
When applying the Three-Way Color Correction and without changing anything else (just applying), can be seen in the preview of the soft how sudden changes in color tones. For example, the gray tone becomes a little more green, but also can be seen very easy a change in the other color tones too. In fact even RGB Parade show the same thing. This is very, very strange and unacceptable and saw that it happens when trying to use Colorista II too.
I tried the same thing in Sony Vegas Pro 11 and I downloaded the trial version of Edius 6 to convince me if the same thing happens. Not! In Sony Vegas and Edius everything is working correctly, I have not experienced these problems in the preview's of this 2 others softs.
This issue is very annoying because every possible color correction is based on what we see in the preview and if in this preview the tones are seen altered realize that can not make a decent color correction. So what happens here?!? I uploaded a small video demonstration to see very clearly about what I'm talking. You can see in the next link: http://vimeo.com/35317616

Yes Jim, you're right. No changes in the scopes when one just apply RGB Curves, Fast Color Corrector, RGB Color Corrector or the Three way Color Corrector (last three thanks to the new update 6.03). I already wrote that Adobe team has been able to fix this bug for some of the tools/effects.
But Brightness&Contrast? Change Color? Color Balance? Levels? MBLooks? Twixtor? Colorista II? Does it seem normally that all scopes or just one of them jump when you just apply one of these effects/tools? Not to say that in some situations even the tones change (especially in shadows&midtones).
You say this is something "very minimal". I say it is not so. I don't find normally to make a very detalied CC with Three way Color Corrector and then when applying Colorista/MBLooks, for example, the scopes jump and inclusively some tones may be influenced. And I left clear examples in this topic where you can see that this is possible. I don't know if this is "very minimal" or not, but is really so impossible to edit in Premiere without this "very minimal" issue?!? How can it be possible in other softs (Edius, Media Composer, Vegas Pro) and in Premiere not?!?
One more thing: many of us use intermediate codecs in the editing process. Do you find normally that a AVCHD video have the lumninance at approximately 110IRE, to export it directly to Cineform and then import it in Premiere, and the waveform shows the luminance at 100IRE?!? How is this possible?!? So the AVCHD video have a 110IRE luminance, you convert this video to Cineform without changing anything, and then this Cineform video have the luminance at 100IRE?!? And anyone can verify this example.
So, how can one trust in this soft?!?

Very Strange Touchscreen Issue

I recieved and activated my new 8GB iPhone about two days ago and it worked great up until just a few hours ago. I am experiencing the known issue of the bottom 1/2 inch or so of the touchscreen not responding to my touch, which in turn is affecting a lot of main elements of the phone such as SMS, e-mail, iPod, etc. Among that issue, I also encountered a very strange occurrence whilst I was testing the 'dead zone' on my iPhone: Certain sections of the dead zone work if I hover my finger about 2 -3 centimeters from the screen. It is a very strange thing but true, lol. I can even capture video footage of this if it's necessary.
Since I bought my iPhone from an AT&T store, should I return it to them for a new one on the spot or should I do it through Apple? I hope it doesn't come down to the latter since I do not live anywhere near an Apple Store (New Orleans, LA) and I just switched from T-Mobile to AT&T so I'd really hate to purchase a cheap temporary phone while my iPhone is being replaced/fixed.
Edit: Have a Merry Christmas, everyone!
Message was edited by: Fiyerstorm

I just talked to Apple Support and they are going to repair it for me, it's just I need to wait til Friday since I am broke from Christmas! Once I get paid, then I can dish out the 30 dollars to get a rental iPhone to hold me over. The restore temporarily fixed the touchscreen issue since it happened again hours later.
Also, nobody I know who would have a spare AT&T phone doesn't come to mind so I can't just borrow a phone and start the repair process now, but the wait isn't too bad. At least they do not limit the iPhone rental to just physical Apple Store customers!
Thanks for the help, folks. :V

IPad acting very strange (HELP!)

Hi guys,
something very strange is happening to my iPad 2 and I'm hoping someone could help me out.
So my iPad was working fine few hours ago, and had approximately 50-60% battery left. So I put it to sleep by clicking on the power button on top right, and did my business. After few hours, I tried to turn on the screen as usual by clicking the power button but it won't turn on. So I tried long-clicking because I figured somehow it turned off, but it didn't register. I tried clicking the home button but nothing.
So I plugged in the charger (despite knowing there was battery left) and the iPad turned on as if it was completely turned off (and asking my passcode and stuff). When I put the passcode, it opens but the battery says 100%. When I unplug the charger, it goes dead again.
Even more weirdly, when I keep charger plugged, it stays awake for a minute then completely goes dead again. Then after few seconds, the apple logo comes up (as if rebooting) and turns on again. The cycle continues.
I did not drop it or anything, it was just sitting there, and it worked perfectly fine up until now. I'm very confused why it's acting this way.
Is this hardware malfunction, plain and simple? Should I take it to the apple store and have them fix it or replace it?

update:
not sure if this is relevant but I turned on my ipad's icloud so i can move my camera roll to photostream (of course ipad still won't work without being plugged).
Soon after, i got a message on ipad screen saying:
"verification failed.
the certificate for this server is invalid. you might be connecting to a server that is pretending to be setup.icloud.com which could put your confidential info at risk"
Is it possible that my iPad was somehow hacked?

Trackpad began to behave very strangely

After installation Mac OS X v10.7 Lion on my MacBook Air trackpad began to behave very strangely. I just moving the pointer but it's clicking during the movings (closing windows, tapping links etc).
So, how to fix it?

48 hours ago, I installed Lion on my Macbook purchased in the spring of 2009. Everything seemed normal, until I went to type. Regardless if it was in Facebook to reply to a thread, Text Edit, Mac Mail, my cursor would erratically act possessed, cursor appearing in the middle of a blue highlighted portion of what I had just typed. I was cursing my Macbook, wondering what on earth was wrong!
I should state that when I installed Lion, it was from Leopard. I erased Leopard entirely from my hard drive from the Lion disk utility. I did my updates. Called Apple Tech Support today, ended up with a supervisor. Both people I spoke to were terrific. During this phone call, I was advised to reinstall Lion without erasing it from my hard drive. Just to reinstall over the top of what was already on my hard drive. Did this, and to my surprise two software updates arose for Airport Utility and iTunes!! Did those updates. It didn't require a reboot.
I still had erratic-possessed cursor problems. At this point, I went to my iMac desktop, unplugged my new keyboard, and plugged the usb keyboard into my Macbook. This worked beautifully. At this point the lightbulb turned on. With the wired usb keyboard plugged in, I shut down my Macbook. I unplugged the USB keyboard, and rebooted my Macbook. My Macbook keyboard, cursor, trackpad are now cooperating in the manner in which they should be.
I can only suggest to reinstall Lion, without reformatting your hard drive. Check for updates. Reboot. Try my external USB keyboard suggestion. GOOD LUCK!

Very strange, Entry Processor block the entire coherence node

I have a client node(storage= false) client1 which continues do get from cache1, the code is below:
for(int i=0;i<10000000;i++){
            System.out.println("get:"+ cache1.get(i));
and have another client node(storage= false) client2 which invoke a Entry Processor. this Entry Processor is work on cache2(not cache1)
cache2.invoke(keys,new MyEntryProcessor());
the MyEntryProcessor code is as below:
public Object process(Entry entry) {
        for(int i=0;i< 1000000;i++){
            entry.getKey();
            entry.getValue();
            System.out.println(i);
        return null;
when client2 begin run, client1 will be blocked, until client2's Entry Processor is finished.
who can tell me why. it's very strange, because client1 and client2 are work on two different cache. and it's only do get

If these two caches belong to same cache service, then their requests are handled by the same service thread.   Coherence only use single service thread per service per node.    So if the get() for cache1 and the entry processor for cache2 go to the same node, you will see that behavior if cache1 and cache2 belong to same cache service.
Either turn on thread pool (if you want to use same cache service( or use different cache service.

IPad acting very strange and gets hot.

My iPad mini is acting very strange, Siri starts as normal, but repeats "Siri not available" about 25 times before working. The iPad is slow and gets very hot when on. When you type it takes a minute for the iPad to catch up even if you type slow. What could be wrong?

Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

Very strange problems since upgrading.

Ok, since I did a Pacman -Syu a week or so ago, I've been having some very strange issues.
Number one, about 60-70% of the time I am completely unable to log into the box, I end up rebooting over and over to finally get the desktop environment to successfully load. It ran fine before. My rc.conf looks like this:
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="America/Los_Angeles"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MYTHCONFDIR="/home/mythtv"
MOD_AUTOLOAD="yes"
MODULES=(dm_mod fuse)
USELVM="no"
HOSTNAME="hosty"
eth0="dhcp"
eth1="dhcp"
INTERFACES=(eth0 eth1)
gateway="default gw 192.168.xxx.xxx"
ROUTES=(!gateway)
DAEMONS=(syslog-ng network netfs crond hal fam apcupsd httpd mysqld ntpd gdm)
What will happen is gnomes new login screen (I assume it's gnomes new login screen anyway), will pop up, I'll log in by selecting name, entering password... all fine. Then the hard drive will go nuts for a second or so (expected), and I'll get an untitled window that pops up and says:
unable to update ICEauthority file /home/user/.ICEauthority
Which is strange, since to my understanding, I've never installed or used ICE. Then another window pops up with more information that I am unable to remember (too long). Then it will grind a bit, then stop at the same leaf background gnome startup used, then a final window will pop up complaining that Nautilus is unable to create the directories "/home/user/Desktop" or "/home/user/.Nautilus".... which is complete horsecrap since those directories have existed on this hard drive for years now.
Then it simply stops at the leaf background, and nothing else loads. So of course my first thought when I upgraded was, aw crap, X needs some work again. So I immediately do a {CTRL}-{ALT}-{F2} to get a bash prompt... and suddenly the plot thickens... I get nothing, just a blank screen with a cursor in the upper left. No bash login, nothing. So again I figure, ok, no big deal, I logged on F7, I'll just go back and kill X... I go back, still leaf screen, then hit {CTRL}-{ALT}-{BSPACE}... nothing. I can't kill X, and I can't get a bash login. I'm stuck. The only command that works is {CTRL}-{ALT}-{DEL}.
So of course being the lazy bastard that I am, and this box being a MythTV box, I figure, no problem, I'll fix that later since if I reboot enough I can get logged in and everything is fine, I'll just leave it running like I always do. Except for last night when I decide to tackle the problem. I thought I was being very smart when I removed 'gdm' from the final daemon in /etc/rc.conf... until I realized that just left me with a computer that had booted, but NO BASH LOGIN PROMPT. Nothing, no way to control the computer at all. I was just sitting there watching my Mythbackend spit out notices and errors one by one, unable to get any sort of # or $. I managed to grab an old archlinux CDrom and use it to rescue the system by restoring an old /etc/rc.conf, but I have no understanding why I would not get a login prompt.
So you see, I'm quite stuck. I cannot seem to get any sort of command-line login prompt without X running (terminal still works) to fix things. And 60-70% of the time, X/gnome will not finish starting up. Any help?
Last edited by jeremyrainman (2009-12-02 14:24:10)

miau wrote:
Maybe you are ot allowed to write the ICEauthority file...what is the output of
ls -l /home/user/.ICE*
output is:
$ ls -l /home/user/.ICE*
-rw------- 1 user user 12878 2009-12-02 11:41 /home/user/.ICEauthority
schuay wrote:
Not having a bash login prompt looks either like
a fscked /etc/inittab. Your output should look like this:
~]$ grep tty /etc/inittab
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
Or this:
http://bbs.archlinux.org/viewtopic.php?id=80939
I looked through that thread there, it sounds like a udev + kernel 31 issue? so I promptly did:
$ uname
Linux
And suddenly became alarmed that I'm not seeing a linux version number. Why would this happen? I went through what fixed it for other people on that thread (renaming udev directories, reinstalling udev), and it hasn't made any difference, so I think this is a different issue.
The other two suggestions in this thread would seem to be worthless since the /.ICEauthority file has the proper ownership/permissions.
Still at a loss. wiping and reinstalling is not pretty on a mythbox with nearly a terrabyte of recorded TV.

Very strange power problem...

Hey guys (and girls ofcourse),
I'm having a very strange power problem with my late 2007 2.2Ghz santa rosa macbook.
Can you guys help me determine what the problem could be?
Here's what happened prior, when the macbook was still working. I got home from work, plugged my adapter into the wall, and it started charging. I left it on the table, and when I came back from the diner table I continued working, but suddenly noticed my macbook wasn't charging anymore. (the orange/green led wasn't lighting up but i was able to work on battery power)
I thought it was the poweradapter, so I went to the apple store the next day to lend one to test it. That didn't work, so it's not the adapter.
So then I started thinking it must be the magnetic DC connector. So I ordered that from the guys at ifixit, (since it's out of warranty) but I replaced it and it's not working.
I don't think it's the logic board, because I was able to continue working until I ran out of battery power. And I also don't think it's the battery connector, because if i'm not mistaking, the macbook can run without battery as well, but mine can't anymore.
Now I can't get any life out of my mac anymore...
Might there be something I overlooked?
Any suggestions are definately welcome!
Thanks a lot.
Timo from Belgium.

Hi Timo,
I think i have the same problem, my mac is not working without battery in it. and it wont charge it.
i wrote a post here http://discussions.apple.com/thread.jspa?threadID=2105648&tstart=0
let me know if you have fixed the problem
thanks

Quiz works until uploaded to LMS, very strange

Similar Messages

Maybe you are looking for