Quota Increase on StIN_PERF-TRF_ERM

Hi Beehive Support,
Could you please increase the quota on StIN_PERF-TRF_ERM to 2GB, as we've customers using this space actively and project moving into Construction phase will warrant an increased usage.
Regards,
Gautam

[email protected] is in the STIN_PERF group and looks OK to me . Has he tried using a different browser ?
WebDAV access can smetimes throw up the username password box multiple times - I found adding a # at the end of the string helps, i.e. https://beehiveonline.oracle.com/content/dav/#
Phil

Similar Messages

Rules Quota Increase not Taking Effect

I increase the size of the Rules Quota limit from 64KB to 256KB. However, when trying to add new rules in Outlook it still says "One or more rules cannot be uploaded to Microsoft Exchange and have been deactivated. This could be
because some of the parameters are not supported, or there is insufficient space to store all of your rules."
Is there something else I need to do ?
Elkin Hincapie MCSA 2003\MCTS 2008\ITIL V3\MCTS Exchange 2010

Hi,
Please use this command to make sure your account has got the new rules size.
Get-Mailbox [email protected] | FL displayname, rulesquota
Please also restart outlook to check this problem.
By the way, the quota for mailbox rules applies only to enabled rules. There is no restriction on the number of disabled rules a mailbox can have. However, the total size of rules that are enabled or active can't exceed the value specified for this parameter.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Bug: Quota misreported after quota increase to 5GB

I encountered a serious bug in Mail today when I raised the quota on an IMAP acount from 2GB to 5GB.
This caused Mail to believe it only had 928MB of quota and since the IMAP account already had 1.4GB of mail in it, Mail claimed it was over quota. Of course it was wrong about that.
While it was in that state, if I moved a message from one folder to another in the IMAP account, the message wasn't moved to the new folder but it was still deleted from the original folder. Thus, Mail had deleted the messages insted of moving them.
sigh
Is anyone using Mail successfully with an IMAP quota larger than 2GB? (And I don't think I care about IMAP accounts that don't have quota enforced, only those that do.)
Thanks.

I'm currently getting an IMAP quota message, saying:
ALERT
The IMAP server for "Metolius IMAP" wishes to alert you to the following:
You exceeded your mail quota.
As it happens, though, my IMAP account does not have a quota.
This appears to have started happening after I exceeded 2GB in the IMAP account. I haven't gone to the trouble of reducing the total to below two GB to see if that fixes the problem, but will give that a try soon.
Just wanted to know if anybody else has seen this problem with Apple Mail and IMAP accounts.

Increase Individual Users Quota

In the past I was able to right click on a Users Home Directory > Properties > Novell Info and change their Quota.
Now when I do this, even though it says the change was made, it is not updating for the Users. They still cannot save to their Home Directory as it tells them their disk is full.
There is ample room on the Volume.
NSM does not report any errors on the Engine or Agent monitor screens.
NSM 2.5.1 (I know. An upgrade is on our list :)) On Netware 6.5
Windows 7 User machines
eDir 8.8.6
NSS data on OES2 SP3
Any ideas. This is probably the first request we have had for a quota increase since we went to Windows 7. Could that be the issue?
Thanks!!

On 9/10/2012 1:06 PM, kbannister wrote:
>
> In the past I was able to right click on a Users Home Directory >
> Properties > Novell Info and change their Quota.
>
> Now when I do this, even though it says the change was made, it is not
> updating for the Users. They still cannot save to their Home Directory
> as it tells them their disk is full.
>
> There is ample room on the Volume.
>
> NSM does not report any errors on the Engine or Agent monitor screens.
>
> NSM 2.5.1 (I know. An upgrade is on our list :)) On Netware 6.5
> Windows 7 User machines
> eDir 8.8.6
> NSS data on OES2 SP3
>
> Any ideas. This is probably the first request we have had for a quota
> increase since we went to Windows 7. Could that be the issue?
>
> Thanks!!
>
>
kbannister,
Are you able to increase these users' quota through NSM's Quota
Management interface? Or through iManager? Or have you only attempted
this through ConsoleOne?
If none of those tools work, the problem might be the NSS settings on
the volume in question. Verify those with NSSMU.
- NFMS Support Team

Mail quota issues

Server Running mac osx 10.4
Server Admin does not reflect recent changes made within WGM in relation to Mail quota increases.
I have rebooted, refreshed mail system etc but the mail quota appearing in mail accounts is incorrect.
Please advise the best way to make the changes stick.
Thanks
Simon

It could be that the quotas need reconstruction. Download and install mailbfr (available here: http://osx.topicdesk.com/tools/ ) and issue:
sudo mailbfr -q
Failing that, please check /var/log/mailaccess.log for clues. Maybe your Cyrus DB is broken.
Also note, that quotas and mailboxes over 2GB will not work correctly.
HTH,
Alex

Plans larger than 500GB

Are there any plans of having quotas increased from the maximum 500GB that is available now. I'm finding my limit is being used quite frequently and quickly as the months go on. I utilise iTunes for a lot of my TV and am finding that for the qaulity that iTunes deliver the average TV show is around 1.3GB. Along with other net based activity and 3 children ranging from high school to primary, for me personally 500GB is the new 200GB.I don't need unlimited (although it would be handy) I'm hoping that perhaps 1TB plans might be in the pipeline.I'm in a Telstra only exchange and aprt fromExetel and Dodo (unlimited) iiNet seem to be the only ones offering a 1TB plan via TW.  Regards

DanfromQLD wrote:
It amazes me how in this day and age that you don't have access to a decent service, wow! Speaks volumes about the current telecommunications infrastructure we currently have and hence the NBN will help aleviate a lot of this. The service I get is decent, I have some minor congestion issues in peak times but other than that it is a decent service. Am I happy what I pay for it, no, but what choice is there from another ISP? None. The NBN will be very helpful to us, it will level off the internet access options for everyone far better than it does now.DanfromQLD wrote:
And you seem perplexed that I find 500GB not ample but in the same sentence you struggle with your own quota. A tad contradictory don't ya think Are you kidding, you are trying to tell me that while you have access to 500GB I should be happy with and not complain about not having enough data with only 15GB available. I challenge you and your family to go a month on only 15GB TOTAL.
Contradictory, rofl and again are you kidding!. Again you get 500GB per month, try and limit that to 15GB. Or as I said if 500GB really is not enough BUY another account or go elsewhere if other ISP's are offerring 1TB plans, no one is stopping you,DanfromQLD wrote:
I really don't need to reiterate what I have written in my initial post but if you ponder back though and do some maths you might educate yourself somewhat. Just for sh$%s and giggles, please do some reseach on itunes and file sizes along with a family of five that includes teenages.  We are a family of 5, with our children all teenagers, so what's your point?
If you do the maths you get 500GB per month, that is 16.6GB (roughly) per day, note how that is more than what we get for a whole month, That is 3.34GBs per day per person in your household. Continue with the maths, we get 15GB (for the whole month), that is 500MBs (note MB not GB) per day, which equated to 100MB's per day per person in our household.
If you do the maths the answer is quite an easy one to understand. Oh and knowing file sizes etc in itunes and everywhere else is essential in our household where we do not allow file downloads unless it is critical download like virus definition updates, we do not use youtube EVER!, we do not use Skype EVER! Our kids cannot play any form of online games EVER!DanfromQLD wrote:
To give you some credit, we don't always use 500GB but the last few months we have so I asked the question.There is a reason there are ISPs out there with 1TB, 2TB and unlimited plans, the demand for bandwidth is increasing everyday.  I would hate to imagine how many HDDs you must have in your Computers to store 500GB or more per month. I know storage is cheap but sheesh! While I realise it is not all stored that is still a significant amount every month. Again if you want more data than the whopping 500GB's you already get. you have choices;1. Buy another plan2. Go to another ISP that provides larger plans (good luck with that)3. Get outside and do less on the computers Cheers GW

How can I upload my offline bookmarks to sync server for syncing them?

Firefox is the only browser I use and I have tons of bookmarks. I use Firefox Sync to sync my bookmarks primarily over 4 devices (2 Desktop PC, 1 Notebook and 1 Tablet). With the previous Sync model of Firefox I had to request for a quota increase mentioning that I will be needing only the Bookmarks to be synced, nothing else. My quota was increased, Firefox introduced the new Sync model, it was really great and easier, everything was fine.
Recently I've lost a huge number of bookmarks from Sync. Only one desktop PC still has all the bookmarks, but on the other 3 devices a certain number of bookmarks is absent at the end of the alphabetically sorted list. I uninstalled Firefox and deleted everything Firefox-related from one of these 3 devices, performed a fresh new installation and synced again. But no result, those bookmarks are still missing. I've added new bookmarks from the PC that still has all the bookmarks and they were synced properly over the other 3 devices. I think somehow those specific bookmarks (which are missing on the other 3 devices) got disconnected/unlinked from the Firefox Sync Server.
Now, since I have the missing bookmarks on one PC, is there any way to upload these unlinked bookmarks to Firefox Sync Server so they can be re-linked and synced over the other devices? If yes, how can I do that? If no, what else are my options to get my bookmarks back & synced?
- Atiyar

You cannot add anything to Sync that is outside of Firefox. The service will only connect thru a Firefox installation.
As far as trying to solve that problem with the "lost" bookmarks on 3 devices ...
1. Disconnect all 4 devices from Sync.
2. Then on the PC that still has all your bookmarks, install this extension - https://addons.mozilla.org/en-US/firefox/addon/places-maintenance/ - to rebuild the Places database on that device. ''I suspect that is where your problem started.''
3. When the "maintenance" is done, reconnect that device to Sync and let it run for like maybe 24 hours to re-populate the Sync server with "fixed" data.
4. Then you can start reconnecting the other 3 devices to Sync one at a time ''(do the Tablet last)'', allowing some time for each device to "digest" whatever changes are made when re-connecting to Sync.
''Don't rush Sync at any stage - depending upon how many bookmarks and how much history you have - maybe add one device per day and leave Firefox running for a long time not doing anything else. From what I have observed with Sync when fixing something like this it works in "spurts" of data transfers especially when the Sync servers are very busy.''

Sync always fails on Aurora on Android, but set up works fine

I have had Aurora on my desktop for a long time, with Sync set up and working.
I recently got a new phone and decided to install Firefox for Android. I first installed Firefox Beta, but then decided to switch to Aurora (to match my desktop), after removing the beta and restarting the phone.
I am able to set up Sync successfully, but it never manages to actually perform an actual sync operation. It ''always'' says 'Sync is currently experiencing problems. It will be back shortly'. My desktop Aurora is unaffected.
Additionally, when I check my Sync account on the management site (account.services.mozilla.com), some of the options are broken: Clear your Sync data and Request a quota increase give me dinosaur-treadmill-escape errors with IDs like 7269f5afb481c69cfd5b3d66fc623401
Update: seems to have been solved via help in https://bugzilla.mozilla.org/show_bug.cgi?id=779190 :)

I only have one copy of Firefox installed, Aurora.
I originally installed Beta, but removed it completely before installing Aurora. Sync failed with the Beta, which was part of the reason for switching to Aurora match my desktop set up (in case that helped).
I've set up and removed Sync accounts, and updated Aurora several times - but with no change in Sync's failures.
Today, I removed Aurora again, restarted the phone and reinstalled it. Set up Sync again. It *still* fails. Sync sets up fine, but the actual sync operation never successfully completes.

How many vpn can be used simultaneously in Azure?

I need to add multiple locations to my azure platform approximately 90 branches , I need to know if I should set up a vpn for each branch , or as I should. thank you very much .
I am from Colombia , if they can write in Spanish would be better

Hi,
It seems that you have asked this question before:
https://social.msdn.microsoft.com/Forums/azure/en-US/c533ff85-c155-4a19-8156-67901da66ee4/how-many-vpn-can-be-used-simultaneously-in-azure?forum=WAVirtualMachinesVirtualNetwork#c533ff85-c155-4a19-8156-67901da66ee4
Based on my experience, the maximum limitation for virtual networks and local networks is 100 per subscription and the limitation for local network
sites is 10 per virtual network in Azure. If you connect each on-premise branch with an Azure virtual network, it would be possible to do that. However, the default limitation for virtual networks and local networks is 10 per subscription, you can request
an increase limitation by following the article below:
http://azure.microsoft.com/blog/2014/06/04/azure-limits-quotas-increase-requests/
If you have anything unclear, please feel free to let me know.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Pay-As-You-Go account not showing up in Visual Studio deployment

I am trying to deploy my ASP.NET MVC to my Pay-As-You-Go plan. When I sign into my account (during the publish process in Visual Studio) it doesn't show that I have any subscriptions. I clearly have a Pay-As-You-Go subscription....

Hi Christopher;
Apologize for the inconvenience. This aforementioned issue pertains to Commerce and Billing Department.
Commerce support is also known as “Billing” support. Scenarios where you
do not have any question or problem related to the delivery of a running service, already deployed in Windows Azure platform, will fall under the scope of commerce/billing support.
Examples of scenarios which fall under the commerce support scope are:
Purchase/Pricing
Account management
Subscription management
Usage/billing
Portal feedback
Credit/refund
Invoicing ennoblement
Enterprise Agreement assistance
Technical integration (ie. Quota increase, Penetration testing)
Legal and Compliance
The above list is not exhaustive although it gives you basic understanding to distinguish Billing support from Technical support.
Billing service requests can be created in both Azure
Billing portal as well as Azure Management portal.
Please refer to the guide below to open a ticket and help would be rendered.
How to open a Billing/Technical support request from Portal
Service requests can be created from both
Billing portal as well as Management portal following the below steps:
Billing portal:
Select target subscription and click on Contact Microsoft Support on the right side of the webpage.
Management Portal:
Click on your account name and then click on Contact Microsoft Support
Choose target subscription from dropdown menu and the specific Support type (Note: you need a paid technical support plan for Technical support enablement).
You can also specify the preferred language and your location.It is very important you properly choose country/region and preferred language in order to receive support by an engineer close to your time frame and,
possibly, speaking your language.
Click on Create Ticket
Follow on screen instructions to properly classify your request and provide a clear and specific description of the scenario/problem.
Once you complete these steps and submit your request, a support engineer will contact you as soon as possible to proceed with your request.
Please feel free to revert back for any queries.
Regards
Prasant Chhetri

Azure Cores Upgrade

Hello,
I would like to know how I can upgrade my package to run more than 20 cores at the same time?
Currently my subscriptions only allows up to 20 cores?
Please advice.
Thank You.

Hi,
Kindly read
this article
Here is a snippet
Good point is the quota increase doesn’t impact billing and the user is charged based on usage and not number of Cores assigned.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

MSI 6970 Lightning - artifacts issue

Hello,
Yesterday I received my MSI 6970 Lightning and today I installed a few games to try and see how it performs.
Everything works as expected until you start stressing it with some of the newer, heavier games and/or benchmarks.
I took some pictures to show what I mean that you can view at:
http://dev.nixit.nl/artifacts/
It's running at default speeds and I tried the latest drivers from MSI as well as the latest official AMD/ATI drivers and v12.1
Other information that may be relevant:
motherboard: evga x58 sli
PSU: 1000w cooler master
ram: 12gb ocz ddr3 1600
hdds: 2x74gb raptors (heh, oldies I know), 2x750
Any ideas? I mean, I know that I can probably downclock it but come on it should run at its advertised speeds at least, right?
Is this a known issue? If any other information is required to solve this please do ask I'll be here checking for updates!
Thanks in advance

You should read this thread and specifically regarding the switches on the back of the card. https://forum-en.msi.com/index.php?topic=150708.0
These are the switches that should ONLY be operated by professional overclockers under controlled circumstances.
Mainly because these switches remove precautionary measures from graphics cards to allow them to deliver the highest levels of performance.
These switches can be found on the back and the side of the card and have several functions:
Quote
BIOS Switch, run with the normal Lightning BIOS or a special sub-zero version
Please check this switch, i.e. the position its in. Ensure that it is in the "Normal position".
Then the following switches are best left alone, but just check.
Quote
Xtreme Cool :
Removes coldbug (boot at sub-zero temperatures!) on N580GTX Lightning
Increases the AMD Powertune limit by 250% on R6970 Lightning
Quote
Increase Memory and GPU Voltages
PWM clock tuning:
Increases the PWM frequency from 260 to 310 MHz on the N580GTX Lightning
Increases the PWM frequency from 300 to 350 MHz on the R6970 Lightning
Increase PLL voltage
Remove Overcurrent Protection (warning, this WILL burn your card easily if you're not careful!)

How can we increase resource quota of sandbox solution in sharepoint 2013?

Hi,
i have created a sandbox solution for sharepoint 2013 but the problem is it shows that your resource usage exceeds your quota.so is there any way we can increase the resource usage quota.
my application is on sharepoint online 365.
thanks,
Gaurav

Sandbox solutions have been deprecated for SharePoint 2013. And if you're using this within Office 365, then I'm guessing it means you've navigated directly to the _catalogs/solutions library? As this resource quota is normally controlled from
Central Administration, you might be stuck with your curent quota.
Andy Burns has some interesting observations on Office 365 limitations when it comes to Sandbox solutions
http://www.novolocus.com/2012/07/17/office-365-technical-observations-from-a-first-project/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How do I increase or decrease the quote level when editing a message?

When replying to a message, I often like to intersperse my responses with the relevant sections of the original message. When I try to do that in Thunderbird, it extends the quote line way above the quoted text. There appears to be no way to delete the "excess" section of the quote line without removing the quote line entirely.
Also, when there are two previous messages in a thread, there is only one quote line next to both. I cannot find any setting, nor any manual way of increasing the quote level of the original message.

this add-on might do it for you https://nic-nac-project.org/~kaosmos/quoteandcomposemanager-en.html

Windows Azure Active Directory MA - Maximum number of items that can be serialized or deserialized in an object graph is '500000'. Change the object graph or increase the MaxItemsInObjectGraph quota.

Trying to use WAAD with FIM 2010 R2 SP1 (4.1.3496.0) and during export several objects cause a warning/info with:
Maximum number of items that can be serialized or deserialized in an object graph is '500000'. Change the object graph or increase the MaxItemsInObjectGraph quota.
I looked, this appears hard coded into the MA, anyone know what causes this? My best guess is something like a large group membership? Does anyone know what the limits around the WAAD MA are?
Here is the indepth error logged during the failure:
ProvisioningServiceAdapter::ExecuteWithRetry: Action: Export, Attempt: 0, Exception: Microsoft.Online.Coexistence.ProvisionRetryException: Unable to communicate with the Windows Azure Active Directory service. Tracking ID: e94e6020-8434-4aa7-9a29-b2edf7fe6b2e
See the event log for more details. ---> System.ServiceModel.CommunicationException: There was an error while trying to serialize parameter http://schemas.microsoft.com/online/aws/change/2010/01:syncObjects. The InnerException message was 'Maximum number
of items that can be serialized or deserialized in an object graph is '500000'. Change the object graph or increase the MaxItemsInObjectGraph quota. '. Please see InnerException for more details. ---> System.Runtime.Serialization.SerializationException:
Maximum number of items that can be serialized or deserialized in an object graph is '500000'. Change the object graph or increase the MaxItemsInObjectGraph quota.
   at System.Runtime.Serialization.XmlObjectSerializerContext.IncrementItemCount(Int32 count)
   at WriteArrayOfstringToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , CollectionDataContract )
   at System.Runtime.Serialization.CollectionDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeAndVerifyType(DataContract dataContract, XmlWriterDelegator xmlWriter, Object obj, Boolean verifyKnownType, RuntimeTypeHandle declaredTypeHandle, Type declaredType)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeWithXsiType(XmlWriterDelegator xmlWriter, Object obj, RuntimeTypeHandle objectTypeHandle, Type objectType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle, Type
declaredType)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
   at WriteSyncObjectGroupToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , ClassDataContract )
   at System.Runtime.Serialization.ClassDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeAndVerifyType(DataContract dataContract, XmlWriterDelegator xmlWriter, Object obj, Boolean verifyKnownType, RuntimeTypeHandle declaredTypeHandle, Type declaredType)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeWithXsiType(XmlWriterDelegator xmlWriter, Object obj, RuntimeTypeHandle objectTypeHandle, Type objectType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle, Type
declaredType)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
   at WriteArrayOfSyncObjectToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , CollectionDataContract )
   at System.Runtime.Serialization.CollectionDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
   at System.Runtime.Serialization.DataContractSerializer.InternalWriteObjectContent(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
   at System.Runtime.Serialization.DataContractSerializer.InternalWriteObject(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
   at System.Runtime.Serialization.XmlObjectSerializer.WriteObjectHandleExceptions(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeParameterPart(XmlDictionaryWriter writer, PartInfo part, Object graph)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeParameterPart(XmlDictionaryWriter writer, PartInfo part, Object graph)
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeParameter(XmlDictionaryWriter writer, PartInfo part, Object graph)
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeParameters(XmlDictionaryWriter writer, PartInfo[] parts, Object[] parameters)
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeBody(XmlDictionaryWriter writer, MessageVersion version, String action, MessageDescription messageDescription, Object returnValue, Object[] parameters, Boolean
isRequest)
   at System.ServiceModel.Dispatcher.OperationFormatter.OperationFormatterMessage.OperationFormatterBodyWriter.OnWriteBodyContents(XmlDictionaryWriter writer)
   at System.ServiceModel.Channels.Message.OnWriteMessage(XmlDictionaryWriter writer)
   at System.ServiceModel.Channels.BufferedMessageWriter.WriteMessage(Message message, BufferManager bufferManager, Int32 initialOffset, Int32 maxSizeQuota)
   at System.ServiceModel.Channels.BinaryMessageEncoderFactory.BinaryMessageEncoder.WriteMessage(Message message, Int32 maxMessageSize, BufferManager bufferManager, Int32 messageOffset)
   at System.ServiceModel.Channels.HttpOutput.SerializeBufferedMessage(Message message)
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Online.Coexistence.Schema.IProvisioningWebService.Provision(SyncObject[] syncObjects)
   at Microsoft.Online.Coexistence.ProvisionHelper.InvokeAwsAPI[T](Func`1 awsOperation, String opsLabel)
   --- End of inner exception stack trace ---
   at Microsoft.Online.Coexistence.ProvisionHelper.CommunicationExceptionHandler(CommunicationException ex)
   at Microsoft.Online.Coexistence.ProvisionHelper.InvokeAwsAPI[T](Func`1 awsOperation, String opsLabel)
   at Microsoft.Azure.ActiveDirectory.Connector.ProvisioningServiceAdapter.<>c__DisplayClass1.<Export>b__0()
   at Microsoft.Azure.ActiveDirectory.Connector.ProvisioningServiceAdapter.ExecuteWithRetry(String actionName, Action action).

Hi gdedshg,
>>Maximum number of items that can be serialized or deserialized in an object graph is '65536'. Change the object graph or increase the MaxItemsInObjectGraph quota
When meet the above exception, please try to do the following configuration:
On the server side:
Add the following to the server's config file:
<behaviors>
<serviceBehaviors>
<behavior name="MyServiceBehavior">
<dataContractSerializer
maxItemsInObjectGraph="2147483647" />
</behavior>
</serviceBehaviors>
</behaviors>
And reference it in the service using the following code:
<services>
<service
behaviorConfiguration="MyServiceBehavior"
name="serviceName">……
On the client side:
Add the following:
<behaviors>
<endpointBehaviors>
<behavior name="MyClientbehavior">
<dataContractSerializer
maxItemsInObjectGraph="2147483647"/>
</behavior>
</endpointBehaviors>
</behaviors>
And reference it in the endpoint using the following code:
<endpoint address="serviceAddress"
behaviorConfiguration="MyClientbehavior"
For more information, please try to refer to the following article:
http://blog.aggregatedintelligence.com/2011/01/wcf-maxitemsinobjectgraph-error.html .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Quota Increase on StIN_PERF-TRF_ERM

Similar Messages

Maybe you are looking for