Quota notification message

I am running messaging server version 6.1. I am using 'imquotacheck -en' command to send notification messages to above-quota users. The command uses a message template and rule file to locate the content and conditions of the notification message. Now I need to make changes into content of notification message sent to the users. However changing the message template in messaging server configuration directory isn't working. Do I need to do an MTA rebuild for the changes to take affect.

You do not need to "compile' this template file. I suspect you're editing a template, not the active file itself.

Similar Messages

  • Exchange 2013 - Quota notifications problem

    Hello,
    First of all I want to express mild disappointment with the way quota notification alerts are documented on Technet for Exchange 2013. The only reference I could find is that QuotaNotificationSchedule parameter of the Set-MailboxDatabase cmdlet no longer
    does anything: "This parameter has been deprecated in Exchange 2013 and it no longer does anything.".
    The only other reference I could find is this forum post:
    http://social.technet.microsoft.com/Forums/exchange/en-US/f30bb2ca-91ab-4e69-a8b6-720e6a8a5b83/exchange-2013-quota-notification-message-not-sent-during-schedule?forum=exchangesvrgeneral
    where it says: "Quota messages are generated once the user log in to mailbox in exchange 2013."
    However, Microsoft Press published a book in 2013 "Inside Out: Microsoft Exchange Server 2013: Mailbox and High Availability" where QuotaNotificationSchedule parameter is being referenced as a working parameter which controls when Quota notification
    are being sent.
    My experience says that the forum post is correct.
    Now onto the problem.
    While our customer was still on Exchange 2010 they were the victims of this issue:
    http://support.microsoft.com/kb/2480474/en-us which could easily be fixed with
    CheckWarningQuota registry key.
    Now we have migrated those mailboxes to Exchange 2013 and again, users are not receiving quota notification e-mails. Only a few users receive quota notifications e-mails and those are users that got their mailbox created on the new Exchange 2013 system.
    Migrated users do not receive notifications. We have tried CheckWarningQuota on Exchange 2013 but it does nothing. Our theory is that mailbox flag introduced in Exchange 2010 SP1 is migrated with the mailboxes to Exchange 2013 and is the
    reason why we are not receiving quota notifications again.
    I appreciate thoughts and comments.
    Regards,
    Dinko

    CU8 addresses this issue, however, only for mailboxes not yet moved to 2013: https://support.microsoft.com/en-us/kb/303695
    Mailboxes already moved will have to be manually fixed. The issue is they are missing their lcid (location ID). For whatever reason, the attribute does not make it across from 2010 to 2013. However, if you move the mailbox again to another 2013 database,
    it fills in the lcid automatically. That is one workaround, but not necessarily a good one for people who have migrated a ton of their users already. So what do you do?
    In the KB article, it shows you how to identify the users who are missing their LCID by doing the following in the exchange management shell:
    #first load in the ManagedStoreDiagnosticFunctions, you will need this for the get-storequery cmdlet to work.
    . .\'C:\Program Files\Microsoft\Exchange Server\V15\Scripts\ManagedStoreDiagnosticFunctions.ps1'
    #then generate the list of all mailboxes with an LCID of 0.
    $mbxs = get-mailbox –resultsize unlimited| ? {$_.exchangeversion.exchangebuild.major -ge 15}
    $mbxsq = $mbxs | %{Get-StoreQuery -Database $_.database -query "select * from Mailbox where Mailboxguid = '$($_.ExchangeGuid)'"}
    $mbxsq | ? {$_.lcid -eq 0} |fl displayname, mailboxguid, lcid
    You can modify the script to dump the list to a text file if you need to.
    Now, to address this, I simply populated the lcid for all my mailboxes. All of mine were en-US or lcid 1033, so it was easy to set them all at once. I just grabbed all Exchange 2013 mailboxes and applied the language (en-US) and DateFormat (MM/dd/yyyy) to
    them (replace DOMAIN with your domain name) which in turn sets the lcid to 1033:
    $mailboxes = get-mailbox -resultsize unlimited| ? {$_.exchangeversion.exchangebuild.major -ge 15}
    ($mailboxes).SamAccountName| %{set-MailboxRegionalConfiguration "DOMAIN\$_" -Language en-us -DateFormat MM/dd/yyyy} | FT -a
    Incidentally, if you have already migrated all of your 2010 mailboxes, and you are on at least Exchange 2013 CU6, that script will resolve the issue whether you apply CU8 or not. CU8 fixes it for any other mailboxes that have not yet been migrated to 2013.
    Hopefully this help you out.
    Chris Allen
    Microsoft Support Escalation Engineer

  • Quota warning message not working

    I have Quota warning messages turned on to be sent daily to users using over 90% of their limit.
    To test it I've had an account filled to 95% for a few days and no message yet.
    Anyone else having problems with this? Anyone have any suggestions what might be wrong?

    Hi Edm Dude
    9 days later and no one uses the Quota Warning
    feature? I don't believe this. I'm looking for
    someone who has it working so I can compare
    settings.
    You’ve not had a great response have you? This is a pity. I don’t have the Quota Warning enabled and I have never been asked to enable it at various sites where I have deployed Apple Mail Server. I have never been asked to use Virtual Domains either although I can’t see why this would make a difference.
    Perhaps no one really does use this feature or has a need for it. It may be that it has been tried by others and they have had the same experience as you?
    The user has a limit of 20MB. The quota warning is
    set to 90%, and to notify ry 1 days. These have been
    configured only via WGM
    Don’t quite understand the statment above made from one your earlier posts. Mail Quota limits are defined in WGM. Server Admin is required for notification of Quota excess. Perhaps you already know this and the above statement is a typo.
    I know you have configured the user’s account in WGM for POP and IMAP, but is the user’s mail application account configured for POP or IMAP on the client computer?

  • Bounced Notification messages in Mail

    Help me out!! I have been getting "Bounced Notification Messages" in my mail for the past few days. Have dumped all messages and cleared my mailbox, yet the messages still claim I have exceeded my "quota". Sorry for the stupid question, but how do i correct this, and what can I do to avoid maxing out the "quota"??

    Thanks, I figured it out thru my "server". Just had to dump a ton stuff hanging around for too long. All clear now.
    RL

  • Overquota notification message interval!

    Hi, All!
    We are running the following system.
    Sun Java(tm) System Messaging Server 6.2-7.05 (built Sep 5 2006)
    libimta.so 6.2-7.05 (built 12:18:44, Sep 5 2006)
    SunOS mail-2 5.9 Generic_118558-22 sun4u sparc SUNW,Sun-Fire-V240
    Quota settings:
    store.quotaenforcement = on
    store.quotaexceededmsg = "Subject: Overquota Warning$$[ID],$$Your mailbox size has exceeded [PERCENT] of its allowed quota.$Disk Usage: [DISKUSAGE]$Number of Messages: [NUMMSG]$Mailquota: [QUOTA]$Message Quota: [MSGQUOTA]$$-Postmaster"
    store.quotaexceededmsginterval = 7
    store.quotagraceperiod = 120
    store.quotanotification = yes
    store.quotawarn = 67
    However, users receive overquota notifications every 5-10 minutes!
    Is it possible somehow to reduce notification frequency?
    Monk.

    [email protected] wrote:
    shjorth wrote:
    [email protected] wrote:
    However, users receive overquota notifications every 5-10 minutes!When did this behaviour start occurring? You haven't patched in nearly 4 years so what else has changed recently?I did not apply any patches since 118207-58.
    This behaviour start occurring for all users since we start quota notification procedure.Just to clarify, what "overquota notification" are you talking about? Are you referring to:
    a) The "Overquota Warning" email specified in the store.quotaexceededmsg setting.
    or
    b) Some kind of IMAP client pop-up message advising that the user is overquota?
    Are the users using IMAP or POP or webmail?IMAP!Which IMAP client(s) are they using?
    Regards,
    Shane.

  • How to customize initial secure e-mail notification message

    Can we customize the initial secure e-mail notification message with a company logo or any kind of text?
    The one that says:
    You have received a secure message
    Read your secure message by opening the attachment, securedoc.html. You will be prompted to open (view) the file or save (download) it to your computer. For best results, save the file first, then open it in a Web browser. To access from a mobile device, forward this message to [email protected] to receive a mobile login URL.
    If you have concerns about the validity of this message, contact the sender directly.
    First time users - will need to register after opening the attachment.
    Help - https://res.cisco.com/websafe/help?topic=RegEnvelope
    About Cisco Registered Email Service - https://res.cisco.com/websafe/about
    Basically we want to put our company logo to the top of this message. We already have our company logo added in CRES that shows up when you open the securedoc.html file.
    Thanks!

    Nevermind, I found it.
    Mail Policies > Text Resources > Add Text Resource
    Set the type as Encryption Notification Template (HTML), edit the HTML and then also add one with a type Encryption Notification Template (text), edit the text. Then go into the Security Services > IronPort E-Mail Encryption > modify the Encryption profile and choose the new Text Resources created above.
    Under Text Resources I was also able to create custom bounce messages with variables that display all the relevant information regarding the bounce.

  • How to keep a notification message in my lock screen?

    For instance, when I receive an SMS I get a notification message in my lock screen. After that, if I unlock my phone, without reviewing/opening the iMessage app, and then I lock it again, is there any way to keep my SMS notification in the lock screen?
    Thanks

    Hi Sudheer,
                      U can create a message say "Test" in message pool of Type Info. u can use this message for displaying info messages as shown below.
    wdComponentAPI.getMessageManager().reportMessage(IMessage<ur component name>.Test);
    i am not sure about the image, just try this.
    Thanks and Regards

  • How to add an attribute to a notification message ?

    Hi,
    I want help in adding an attribute to a PO Approval notification message.
    The attribute is from the PO Header screen , it is the Ship-To field (See screenshot) : http://i48.tinypic.com/2wh35v5.jpg
    Kindly help me and tell me how i can add this attribute to Approve PO with PDf message (See screenshot) : http://i46.tinypic.com/nchvzs.jpg
    Best Regards,
    Yousef

    Yousef,
    - You add an attribute at item level, let's call it SHIP_TO, type varchar
    - You add another attribute at the message level, let's call it SHIP_TO too and set its value to item attribute SHIP_TO
    - Now you doble-click on the message and edit its body and add the reference to this new attribute:
    Ship to: &SHIP_TO
    - Save the workflow process and upload to the database.
    - Now you need to set this attribute's value using WF_ENGINE.SetItemAttrText() just like the other existing attributes for this workflow.
    Regards

  • Query regarding the error in the notification message put up by iOS??

    1. Turn off Wifi and 3G network on iPhone iOS5
    2. Launch the iTunes.
    3. Cellular Data is Turned Off message is put up with Settings and OK buttons instead of ------>  OK and Settings buttons.
    Apple users are consistent with say Cancel and Retry (options) in the notifications instead of Retry and Cancel.
    So my assumptions from the various notifications message put up on iPhones, it should be ( Do nothing ) and ( Action button ) in the notification messages.
    Is it OK to keep the same notification while designing the app to maintain this (above - do nothing and action button) consistency or just follow the apple notification as below. Please HELP!
    Cellular

    You should be using HTML Markup if you want to put new lines in eg
    OofSettings oof = service.GetUserOofSettings("[email protected]");
    oof.ExternalReply = "test line 1<br>test line 2<br>test line3";
    oof.State = OofState.Enabled;
    service.SetUserOofSettings("[email protected]", oof);
    Cheers
    Glen

  • Global notification message, can't get it to work

    Hello,
    I was making experiments with the Global Notification message, so I created a page taking a string as input and storing the value in the global variable using the following pl/sql code located in an After-submit process:
    HTMLDB_APPLICATION.G_GLOBAL_NOTIFICATION := :P103_MESSAGE;
    However the message didn't show up, although I modified my template to display it after the "breadcrumbs" (region position 02).
    Then I moved the process in a Before-header position and this time the message displayed as expected (inside the same page).
    Since I defined the global message, I expected to see it appear on other pages, as all of them are based on the same template, but it doesn't.
    Also, v('GLOBAL_NOTIFICATION') returns null.
    I must admit I am puzzled by this behavior.
    Please, could someone clarify how this global message is meant to work?
    The documentation is not clear on this subject.
    Bye,
    Flavio

    Flavio,
    I re-read your original post and the behavior you describe is as expected. Depending on the type of branch you are using, you'll only see the message appear when you set the package global in an OnLoad process (e.g Before Header). If you set the package global onSubmit, its value will be lost on the subsequent page when the branch that follows submits and then redirects. This is because the redirect will cause a whole new database session with new package state to be created. If you set up your branch without a subsequent redirect, the global package variable should still have a value.
    Although the global variable is a true global variable in the PL/SQL package sense, it's not a global variable in the HTML DB (logical) session sense. That's what page items and application items are for. The "GLOBAL" in GLOBAL_NOTIFICATION is meant to indicate that anyone running an application which has the appropriate substitution string in its template will see this message. It was really designed to be a broadcast mechanism from the owner of the application to the end users of the application. I hope this clears things up.
    Sergio

  • How to pass custom parameters to the Notification message body in a process

    Hi All,
    We are migrating from ORACLE workflows to Oracle OWB process flows as part of upgrade to Oracle 11g R2. Earlier in workflow notification mesages we could attach custom attributes (eg X_NAME) and reference the custom attributes in the notification message body (&X_NAME) to dynamically build the message body as per the custom attribute values.
    I tried to add a cutom parameter X_EMAIL_ID to a OWB process notification activity and trying to pass it to the notification message body by giving the value "This message is from &X_EMAIL_ID" in TEXT_BODY. But when I get the notification message it shows only "This message is from" and it does not show anything about X_EMAIL_ID.
    Please advise Please help us if anyone have used any workaround to dynamically populate the TEXT_BODY in a notification activity based on custom parameters.
    Thanks and regards,
    Shankar

    Hi David,
    Thank you for your suggestions. When I try to bind the variable to the notification activity parameter TEXT_BODY I get this error - VLD-10035: The value of parameter TEXT_BODY in a NOTIFICATION activity must be a literal value, bindings or expressions are not allowed. It looks like the text_body can have only literal values. Could you please advise if you received any such error or how could you resolve them.
    Thanks and regards,
    Shankar

  • Settings button (action) is on the left had side of the Cellular Data is Turned Off notification message put up while the OK button is present on the right hand side of the notification

    The defualt notification message put up when launching iTunes on iPhone devices show that Cellular Data is Turned Off message is put up with Settings and OK button.
    This seems to be inconsistent with the default 'Cancel' and 'Action' buttons in other notification messages from Apple.
    Is it fine to consider the OK button first (left) and Settings(right) button next in the Cellular Data is Turned Off error message in the apps so that it is in line with the apple guidelines??
    Please help with this.
    Thanks you so much.

    Try the basics from the manual.  Restart, reset, restore.

  • Notification message box of Hyperion Planning when user login

    Can we have a notification message box popup when user login Hyperion Planning or Workspace application? We would like to communicate to the end users by the system instead of just email because some end users may not check the email so frequently. It is the best to notify end users about any latest changes e.g. budget rate, etc when they login the system to check data or print reports.
    We noticed that there is a broadcast message feature but only limit to those users already online. And the message will not shown when there are some users login later. We would like to have some notice board like message instead of instant messaging.
    The online help of "broadcast message" feature:
    "Use broadcast messaging to communicate a text message to all Planning users currently logged on to an application. For example, you can send messages about system availability or periodic maintenance. You should also send broadcast messages to request that users log out before upgrading or migrating applications.
    You can send broadcast messages using the Web client or a command line utility. If you send them using the Web, they are sent to users of your current application. If you send them using the command line, you can specify any application, without being logged on to it. You can also schedule messages using standard operating system mechanisms. "
    Thanks in advance!

    I have tried the above step and it only works when i am in the advanced mode. but when i change to basic mode i can see the forms and still can access without any disturbance. for your help i am pasting the planningcentral.jsp so that you could suggest me something other.
    Thanks in advance...
    the original file :
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
    <html>
    <%@ include file="Common.jin" %>
    <% nWhichPage = HspConstants.PLANNING_CENTRAL;
    String redirectString = request.getParameter("Redirect");
    String mainFrameContentURL = (String)session.getAttribute(HspConstants.SESSION_MAIN_FRAME_CONTENT);
    String mainFrameContent = ((inAdvancedMode) && (mainFrameContentURL != null)) ? mainFrameContentURL : "SelectForm.jsp";
         String queryString = request.getQueryString();
         String mastHeadURL = "BT_Masthead.jsp" + ((queryString != null) ? "?" + queryString : "");
    %>
    <%@ include file="SessionValidate.jin" %>
    <%-- Section for Checking latest CSS version and redirecting to AppSettings.jsp --%>
    <%     if ((HspPlanning != null) && (HspPlanning.isApplicationOwner()))     {
              boolean isHubRegistered = (HspPlanning.getHubServer() != null);
              if ((!isHubRegistered) || (HspPlanning.isUserMigrationReqd())) {
                   inAdvancedMode = true;
                   redirectString = null;
                   mainFrameContent = "AppSettings.jsp?RND=" + Math.random();
    %>
    <%-- End CSS validation section --%>
    <html>
    <head>
    <title><%= HspMsgs.LABEL_WELCOME_TO_HP %></title>
    <%@ include file="PlanningLibraries.jin" %>
    <script language="JavaScript">
    var isPlanningFramework = true;
         var topFrameLoaded = false;
         var taskListViewPaneLoaded = false;
         var processBarLoaded = false;
    </script>
    </head>
    <frameset id="mainframeset" rows="72,19,*" cols="*" frameborder="NO" border="1" framespacing="0">
         <frame src="<%= mastHeadURL %>" name="topFrame" id="topFrame" scrolling="auto" noresize >
         <frame src="BT_ProcessBar.jsp" title="object palette header" id="objPaletteHeader" name="objPaletteHeader" scrolling="no">     
         <frameset id="nestedFrameSet" cols="20%,*" frameborder="NO" border="0" framespacing="0">
    <% if (inAdvancedMode) { %>
         <frame src="LP_ObjectPalette.jsp" id="leftPalette" name="leftPalette" scrolling="no">
         <frame src="<%= (redirectString != null) ? redirectString : mainFrameContent %>" id="mainFrame" name="mainFrame" scrolling="auto">
    <% } else { %>
    <%     int currentTLId = -1;
         HspTaskList thisTL = (HspTaskList)session.getAttribute(HspConstants.SESSION_TASK_LIST);
         if (thisTL != null) thisTL = HspPlanning.getTaskList(thisTL.getId());
         if (thisTL != null) {
              currentTLId = thisTL.getId();
         } else {
         Vector availableTaskLists = null;
         availableTaskLists = HspPlanning.getTaskLists();
         HspObjectPositionComparator hspObjectCompare = new HspObjectPositionComparator();
         HspCSM.sortVector(availableTaskLists, hspObjectCompare);
         if ((availableTaskLists != null) && (availableTaskLists.size() > 0))
              currentTLId = ((HspTaskList)availableTaskLists.firstElement()).getId();
         } %>
         <frame src="LP_ObjectPalette.jsp?TaskList=<%= currentTLId %>" id="leftPalette" name="leftPalette" scrolling="no">     
         <frameset id="wizardFrameSet" name="wizardFrameSet" rows="*,0" frameborder="NO" border="0" framespacing="0">
    <%     if (currentTLId != -1) {
              String wizardFrameContent = "TL_Navigator.jsp?TaskList=" + currentTLId;
              HspTask currentSessionTask = (HspTask)session.getAttribute(HspConstants.SESSION_TASK);
              if (currentSessionTask != null) {
                   wizardFrameContent = "TL_Navigator.jsp?TaskList=" + currentTLId + "&SelectedTask=" + currentSessionTask.getId() + "&ShowWizard=true";
                   mainFrameContent = "TL_Wait.jsp";
              } else {
                   mainFrameContent = "TaskListStatus.jsp?TaskList=" + currentTLId;
              %>          
              <frame src="<%= mainFrameContent %>" id="mainFrame" name="mainFrame" scrolling="auto" noresize>
              <frame src="<%= (redirectString != null) ? redirectString : wizardFrameContent %>" id="wizardFrame" name="wizardFrame" scrolling="NO" noresize>
    <%      } else { %>
              <frame src="<%= (redirectString != null) ? redirectString : "Error.jsp" %>" id="mainFrame" name="mainFrame" scrolling="auto">
    <%      } %>
    <% } %>
         </frameset>
    </frameset>
    <noframes><body>
    </body></noframes>
    </html>

  • Turning off "Delivery Notification" messages

    Is it possible to totally suppress messages regarding delivery status from Postmaster? I run a pair of JESMS 6.2 servers which are SMTP relays primarily and the accounts used to send mail are not "people" but services. I'd like the "Delivery Notification: Message has been delayed/failed/etc" to not be generated. I think there's a setting in imta.cnf for this but am wary of the syntax. Can anyone advise what the line should look like?
    "defaults notices 1 2 4 7 logging copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 defaulthost blah.com blah.com"
    Sun Java(tm) System Messaging Server 6.2-7.05 (built Sep 5 2006)
    libimta.so 6.2-7.05 (built 12:18:44, Sep 5 2006)
    SunOS 5.10 Generic_118833-33 sun4v sparc SUNW,Sun-Fire-T1000

    MikeTimbers wrote:
    Is it possible to totally suppress messages regarding delivery status from Postmaster?What you propose in contrary to the general nature of email delivery (we strive to not silently 'lose' email which is what this translates too) so there isn't a simple one command to achieve it.
    You could prevent notification/disposition emails by using the notificationchannel/dispositionchannel keyword:
    http://msg.wikidoc.info/index.php/Dispositionchannel%2C_notificationchannel_Channel_Options
    This allows you to change the source channel of these emails. Then by adding a 'discard;' sieve sourcefilter to this new process channel, the emails should be dropped.
    "defaults notices 1 2 4 7 logging copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 defaulthost blah.com blah.com"The copywarnpost and copysendpost are the keywords used to control the behaviour of sending a copy of the bounce/notification message to the postmaster. It doesn't control whether the original bounce/notification message is created. If you don't care about these postmaster copies you can disable them by replacing copysendpost with nosendpost and copywarnpost with nowarnpost.
    http://msg.wikidoc.info/index.php/Sendpost%2C_nosendpost%2C_copysendpost%2C_errsendpost_Channel_Options
    http://msg.wikidoc.info/index.php/Warnpost%2C_nowarnpost%2C_copywarnpost%2C_errwarnpost_Channel_Options
    Regards,
    Shane.

  • Can I send notification message to other users?

    Hi all,
    Can abap webdynpro send out notification messages to other users in a portal? If a new user select some employees that have overwritten other same users selection, I need to send out notification message to other users that their selection have been resetted by this particular user. Can this be done in abap webdynpro?

    In NetWeaver 7.0 Enhancement Package 2 there is a new feature called Web Dynpro Notification Service. It lets you send events to any other applications which are listending for that same event id.  In a demo that comes with 7.02 we use this technology to create a chat application.  However this functionality has to be built into each application.  They must have an event handler ready to respond to the event.
    So you could build what you describe into your application - but only as of 7.02.  7.02 for the Business Suite comes with BS7i2010 which is currently scheduled to start ramp-up in Q4.

Maybe you are looking for