Quota Overview in MSS...

Dear all,
Is it possible to show Quota overiew  of ESS in "MSS >> Team >> Employee Information" Page so manager can view employee's leave quota?. Please suggest me on how to proceed further.
Thanks,
Vasu

Hi,
You can create a "Z" Service  for Quota Overview using Define Services and then assign this is to the MSS
view.
AS it mention in following link
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=104006108
( since it a leave request you need do it for "Quota Overview " process will be the same )
I did like this only

Similar Messages

  • Quota overview is not being displayed in ESS Working Time

    Hi All,
        Please provide a solution for this below mentioned query.
    Quota overview(Absence Entitlements) can be seen in the R/3 for an employee but same(Quota Overview), list of all the leave entitlements cannot be seen in the ESS. There is a message being displayed "There are no customizing settings for ongoing requests for employee No:****". What customizing settings is he talking about?
    Anticipating a solution for this. Thank you.

    Hi.
    R u sure the Absence that is available in infotype 2006 is valid.Do try to create a fresh quota if you have changed the grouping in between,.
    Regards,
    Nachy

  • Publish Customer Report in the page Overview of MSS

    Hi,
    Good Night.
    I want publish a customer report in the page of Overview of MSS.
    Can someone help me, what I should do?
    Regards

    Hi,
    Do you have the homepafe framework created for MSS too?
    If yes, you can make a service with the Customer report from img and then add it to  the Area (suctom area) and then add the are to the custom MSS area group page.
    If not, then you can create a separate workset with attached page and iview and the iview can point to the customer report.
    Attach this workset to the Custom MSS role.
    In case of further quesries, please let me know.
    Thanks and Regards,
    Pinki

  • Development Component for Quota overview

    Hello,
    I have to modify the Quota Overview/Time Accounts service for ESS. I have imported the Development Configuration on Developer Workplace, but I am unable to find the DC for this service.
    Any help would be highly appreciated.

    Thanks for the reply.
    I found the DC for Quota overview.I want to change the name of the column header from Entitlement Type to Allotment ,Please let me know what's the right way to do it ?
    Any help would be highly appreciated./

  • Remove "quota overview" link from Portal ESS

    Hello,
    Is there a way to remove Quota overview link on ESS portal as we are not using it. Please advice.
    Thank you.

    In the tcode PTARQ
    Homepage Customizing>Configure Homepages and Area Pages>Services>Assign Services to Subareas>Assign Services to Subareas (Add and Change Entries)
    New Entries:
    Subarea Key = EMPLOYEE_WORKTIME_SUBLEAVEREQUEST_2005
    Service  Key = EMPLOYEE_WORKTIME_QUOTAOVERVIEW05
    Position          = 0
    Check the following link:
    http://213.41.80.15/SAP_ELearning/OKEC/nav/content/011000358700000597012006e.pdf
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?quicklink=index&overridelayout=true
    Hope this help you
    Regards

  • Modifying ESS code for Quota Overview service

    Hello,
    I want to modify the Quota Overview screen as:
    Change the name of the Column header from Entitlement Type to Allotment.
    When I create a project for the DC I see 3 Webdynpro components ,then I goto VCQuota ->Views->VcQuotaView ->Layout and change the header title there in the properties ,but when I test it in the local server ,it's not reflected.
    What's the right way to do it.
    Any help would be highly appreciated.

    Hi ,
    Usually we define Dev and QA as runtime systems.
    Check out files from DTR , edit , check-in and activate and finally release.
    In DEV system we directly deploy , while in QA.. the released content will be import thru NWDI landscape configurations..
    You can directly deploy your contents in your DEV system and use NWDI infrastructure for further transport across systems.
    I have not seen this component code.. We can customize the fields to be visible from SPRO in the backend. It might be that these are made invisible.
    Or the scenario you are currently working on ,might not necessarily need this..
    Regards
    Bharathwaj

  • Multiple entries for aleave type in quota overview in ESS

    Hi all,
                I am getting multiple records for some leave types in quota overview application in ESS.I mean when i open the quota overview app there are 2 records for emergency leave and 2 records for vacation leave with different values.
    No HR person is aavailabale here.Can anybody help me please.
    Thanx and Regards,
    Rajesh

    Can you tell the forum how the issue got resolved?

  • PT50 Quota overview

    Hello Friends.
    Got an issue in absence quotas. An employee has an earned leave quota of 150 days of which 50 days are utilised, ie in infotype absence record for 50 days are created. now the balance of the quota is 100 days in abs qouta 2006. Due to some reasons the employee has cancelled his leave of 10 days by deleting his abs record of 10 days in infty 2001, so now in infty 2006 the balance quota is 110 days.
    But if you check in PT50 Qouta overview, it is not giving the updated status of 110 days balance. instead its showing 100 days balance. I found that there is a report RPTKOK00 for correction of Quota overview, but now its showing an overview of 150 days in PT50. can anybody please give me the solution on this.
    Thanks and regards.
    Vishal

    Hi,
    Rerun time evalution for that employee and check. If still PT50 is not getting update delete the leave record and create it again. But do it it step by step and do it in Dev/Test sytem. If you get output then you can change it in Production system.
    Once I also got a similar kind of issue.
    Regards,
    GRM

  • Show columns in Quota overview iView

    Hello,
    We would like to show all columns in Quota Overview iView. We can see all columns in report RPTARQUIATEST in R/3.
    But only 5 columns are displayed in the Webdynpro, but in the personalization (ctrl+clic) we can see 14 columns (the same as in in report RPTARQUIATEST) with all the properties visible=true.
    Please, could you tell me where can I customize this columns from R/3 so as to be displayed in portal?
    Thank you&Regards

    By means of Developer Studio.

  • Part appraisals as part of OSA Status Overview in MSS?

    Hi,
    I'm in the middle of a clarification phase regarding implementation of Objective Setting and Appraisal (OSA). This is my question regarding part appraisals:
    In the Status Overview page/iview in MSS, the manager can prepare, see, select and modify documents with statuses like In preparation, In Planning and In Process.
    If a document has the substatus "Part appraisal in process", and the manager is the first part appraiser, I would expect the document to open the part appraisal column for input when I select the document from the "In Process" column. Instead the document is opened with the Final Appraisal column open for input.
    How can you include a managers part appraisal documents in the Status Overview page, or have the part appraisal column open for input?
    We want to make the Status Overview the "one point of access" for the managers appraisal tasks, but is that possible within standard?
    Kind regards Henrik

    Hi Henrik,
    Is your issue resolved, we did notice the similar behavior. However if BSP application HAP_DOCUMENT/documents_todo.htm is called directly, it displays the Part appraisal first and then upon completion it displays Final appraisal.
    I plan on providing this as URL in MSS as an alternative till OSS status overview is fixed.
    Any info ?
    regards
    Sridhar

  • Automatic refresh requisition status overview in MSS e-recruiting

    Hi guys,
    We are implementing e-recruiting 6.0 and de MSS functionality to request a requisition with approvals. The manager can see his/her requests in the requisition status overview to follow-up. If we create a new requisition, the list is only updated with this after you close the browser and log back in in the portal. Is there any way to activate the automatic refresh of this list?
    Thanks
    Karolien

    Nilesh,
    iam working on setting up E-rec in stand alone scenario.
    While we have been able to setup the workflow in MSS up to approval of Extended req. request, i could not see the recruiter getting the requisition to release and publish it.
    Can u pls, send some documentation you have to the below mail address
    raaj333 at rediffmail dot com
    Thanks
    G RAJ

  • Status Overview, Appraisal MSS Iview.

    Hi experts,
    In status overview MSS Iview, Appraisal.
    Manager has a option to select the appraisal form type (ie show dropdown box).
    but we want to remove that DD box and make the table populate the by default all the forms type.
    please help me how to achive this.
    is there any need to modify code in nwds or in the backend.
    if in the backend where in which bapi/class/..?
    thank you in advance.

    Hi Andy thanks for your response.
    which version of appraisals are you using (bsp/webdynpro?)
    we are using bsp version.
    and this staus overview Iview is webdynpro one.
    Is there already an option ALL forms available in the dropdown?
    we dont have ALL type in the option.

  • NW 2004S and ECC 6.0 - ESS Quota Overview does not simulate

    Dear all,
    we are upgrading from 4.6C to ECC 6.0 and from the standalone ESS solution to the ESS in EP NW 2004s.
    In the old ESS we used service pz09 which allows EE's to simulate their future absence quota.
    In the new ESS in EP we are testing the application 'QuotaOverview' in packate sap.com/ess~quotas.
    The simulation of future quota does not work at all.
    Do you have any hints how to fix this problem?
    Thanks in advance!
    Best regards,
    Mathi

    Hello,
    this error is really strange. At this step, sapinst scans all keys that are located under
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
    in order to find existing SAP services and to retrieve their parameters. Since this usually happens in a sorted way, many other keys must have already been successfully retrieved.
    My guess is now that there is a problem that is related just to the service that was processed in the current iteration: ltpsnr
    -> call regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
    -> locate the ltpsnr entry, is it actually there? If yes:
    -> right click on the entry and chose 'permissions'
    -> are the permissions here actually different compared to the other entries?
    Best Regards,
    Michael

  • Configure ESS Salary Statement and Quota Overview

    Hello,
    I am having problems in displaying ESS salary statement on portal (EP 7.0) .....this is the error :
    Form SAP_PAYSLIP_US does not exist
    I feel there is some configuration to be done for this....also how do I configure Time accounts in ESS....is creation of Rule groupd a necessity...?
    Any help would be appreciated.

    Hi Anil,
    just a small check, the z smartform name, have you created this through HRFORMS.
    For example in HRFORMS, u have maintiend HRFORM name say, ZHR_TIME_IN. Now this shoud be activeted and check the details. Here it would be showing the zsmartform name and report name.
    Also, in backend config spro, have u maintained this ZHR_TIME_IN for TESD, TESP,TMW etc..u can select the relevant class. please go thru the node config help on HRFOR feature. u will get sufficient information here
    also,

  • Error in MSS HCM Processes and Forms Overview

    Hi all,
    Currently we are working on ESS/MSS from NW 7.3 portal.
    When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
    And on some user HCM Processes and Forms Overview not shown properly.
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
    What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please suggest me the solution.
    Regards,
    Devendra

    Dear Andrea,
    I reset the password of backend user and gave sap_all and sap_new role.
    Last time it prompt the screen in mss as to change the password. (See above screen shot).
    But after reset the password...error showing instead of login screen in mss as below:
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .  
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
       What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    I checked log in ST22 as below
    What happened?
        The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
         anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_ABAP_TSTMP=================CP' has to be
        terminated.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
         caught in
        procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
    Regards,
    Devendra

Maybe you are looking for