Quota planning for the vendor products
Dear Folks,
I have a scenario where my client is a authorized company to sell the products of some vendors and to maintain this, my client (company) has to achieve some annually targets given by the vendors.
My requirement is to: Define the quota planning for sales representative based on vendors also.
Do i also need to first create a custom field in product for the vendor while replicating from ECC?
Thanks in advance.
Best Regards,
Dinesh.
Hi Dinesh,
In that case , you can do quota Planning based on the org unit structure only.
Maintain Org unit considering the hierarchy such as :
Upper level - Product
Middle level - Vendor
Lower level - sales Representatives
It means you have to create org structure for each possible combinations.
If you have existing Org unit mapped with ECC , you have to change the org structure in CRM and maintain the above structure between the existing org unit if you want ECC org units getting determined in Opportunity level.
Best Regards
Ganesh Somasundaram
Similar Messages
-
Assignments of materials and vendors to inspection plans for the plant 1500
Hi to all,
Please give me solution for make assignments of materials and vendors to inspection plans for the plant 1500.
Thanks,
NAgeshhi gang,
try to make usage decision ,kindly check in material document which you have created while making the GR, check in which storgare location you have specified and try to transfer the stock from quality to unrestricted.and also make a note on batch number also if you have activated the batch management
regards
thyagarajan -
CBO generating different plans for the same data in similar Environments
Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1 COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 3607425 167760 5/02/2013 22:11
METER_CONFIG_HEADER 3658 80 5/01/2013 0:07
METER_CONFIG_ITEM 32310 496 5/01/2013 0:07
NMI 1899024 33557 18/02/2013 10:55
REGISTER 4830153 101504 18/02/2013 9:57
SDP_LOGICAL_ASSET 1607456 19137 18/02/2013 15:48
SDP_LOGICAL_REGISTER 5110781 78691 18/02/2013 9:56
SERVICE_DELIVERY_POINT 1425890 42468 18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 4133939 198570 16/02/2013 10:02
METER_CONFIG_HEADER 3779 80 16/02/2013 10:55
METER_CONFIG_ITEM 33720 510 16/02/2013 10:55
NMI 1969000 33113 16/02/2013 10:58
REGISTER 5837874 120104 16/02/2013 11:05
SDP_LOGICAL_ASSET 1788152 22325 16/02/2013 11:06
SDP_LOGICAL_REGISTER 6101934 91088 16/02/2013 11:07
SERVICE_DELIVERY_POINT 1447589 43804 16/02/2013 11:11
TEST ITEM 2 COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 9878 67 147 12982 869801 3553095
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 7291 2747 2 639 1755977 3597916
ASSET SYS_C00102592 UNIQUE 2 12488 3733831 1 1 3726639 3733831
METER_CONFIG_HEADER SYS_C0092052 UNIQUE 1 12 3670 1 1 3590 3670
METER_CONFIG_ITEM SYS_C0092074 UNIQUE 1 104 32310 1 1 32132 32310
NMI IDX_NMI_ID NONUNIQUE 2 6298 844853 1 2 1964769 1965029
NMI IDX_NMI_ID_NK NONUNIQUE 2 6701 1923072 1 1 1922831 1923084
NMI IDX_NMI_STATS NONUNIQUE 1 106 4 26 52 211 211
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 12498 795 15 2899 2304831 4711808
REGISTER SYS_C00102653 UNIQUE 2 16942 5065660 1 1 5056855 5065660
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 3667 1607968 1 1 1607689 1607982
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 3811 668727 1 2 1606204 1607982
SDP_LOGICAL_ASSET SYS_C00102665 UNIQUE 2 5116 1529606 1 1 1528136 1529606
SDP_LOGICAL_REGISTER SYS_C00102677 UNIQUE 2 17370 5193638 1 1 5193623 5193638
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 4406 676523 1 2 1423247 1425890
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 7374 676523 1 2 1458238 1461108
SERVICE_DELIVERY_POINT SYS_C00102687 UNIQUE 2 4737 1416207 1 1 1415022 1416207
ENVIRONMENT B
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 8606 121 71 16428 1987833 4162257
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 8432 1780146 1 1 2048170 4162257
ASSET SYS_C00116157 UNIQUE 2 13597 4162263 1 1 4158759 4162263
METER_CONFIG_HEADER SYS_C00116570 UNIQUE 1 12 3779 1 1 3734 3779
METER_CONFIG_ITEM SYS_C00116592 UNIQUE 1 107 33720 1 1 33459 33720
NMI IDX_NMI_ID NONUNIQUE 2 6319 683370 1 2 1970460 1971313
NMI IDX_NMI_ID_NK NONUNIQUE 2 6597 1971293 1 1 1970771 1971313
NMI IDX_NMI_STATS NONUNIQUE 1 98 48 2 4 196 196
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 15615 1273 12 2109 2685924 5886582
REGISTER SYS_C00116748 UNIQUE 2 19533 5886582 1 1 5845565 5886582
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 4111 1795084 1 1 1758441 1795130
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 4003 674249 1 2 1787987 1795130
SDP_LOGICAL_ASSET SYS_C004520 UNIQUE 2 5864 1795130 1 1 1782147 1795130
SDP_LOGICAL_REGISTER SYS_C004539 UNIQUE 2 20413 6152850 1 1 6073059 6152850
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 3227 660649 1 2 1422572 1447803
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 6399 646257 1 2 1346948 1349993
SERVICE_DELIVERY_POINT SYS_C00128706 UNIQUE 2 4643 1447946 1 1 1442796 1447946
TEST ITEM 3 COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 13 | 2067 | | 135K (2)| 00:27:05 |
| 1 | HASH UNIQUE | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 2 | HASH JOIN | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 3 | HASH JOIN | | 6 | 900 | | 135K (2)| 00:27:04 |
|* 4 | HASH JOIN ANTI | | 1 | 137 | | 135K (2)| 00:27:03 |
|* 5 | TABLE ACCESS BY INDEX ROWID| NMI | 1 | 22 | | 5 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | | 95137 (2)| 00:19:02 |
|* 7 | HASH JOIN | | 1 | 109 | | 95132 (2)| 00:19:02 |
|* 8 | TABLE ACCESS FULL | ASSET | 36074 | 1021K| | 38553 (2)| 00:07:43 |
|* 9 | HASH JOIN | | 90361 | 7059K| 4040K| 56578 (2)| 00:11:19 |
|* 10 | HASH JOIN | | 52977 | 3414K| 2248K| 50654 (2)| 00:10:08 |
|* 11 | HASH JOIN | | 39674 | 1782K| | 40101 (2)| 00:08:02 |
|* 12 | TABLE ACCESS FULL | REGISTER | 39439 | 1232K| | 22584 (2)| 00:04:32 |
|* 13 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 675K| 12M| | 9412 (2)| 00:01:53 |
|* 15 | TABLE ACCESS FULL | SDP_LOGICAL_ASSET | 1178K| 15M| | 4262 (2)| 00:00:52 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | | 2 (0)| 00:00:01 |
| 17 | VIEW | | 39674 | 232K| | 40101 (2)| 00:08:02 |
|* 18 | HASH JOIN | | 39674 | 1046K| | 40101 (2)| 00:08:02 |
|* 19 | TABLE ACCESS FULL | REGISTER | 39439 | 500K| | 22584 (2)| 00:04:32 |
|* 20 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 21 | TABLE ACCESS FULL | METER_CONFIG_HEADER | 3658 | 47554 | | 19 (0)| 00:00:01 |
|* 22 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 7590 | 68310 | | 112 (2)| 00:00:02 |
Predicate Information (identified by operation id):
2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
8 - filter("ROW_CURRENT_IND"='Y')
9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 181 | 103K (2)| 00:20:47 |
| 1 | HASH UNIQUE | | 1 | 181 | 103K (2)| 00:20:47 |
|* 2 | HASH JOIN ANTI | | 1 | 181 | 103K (2)| 00:20:47 |
|* 3 | HASH JOIN | | 1 | 176 | 56855 (2)| 00:11:23 |
|* 4 | HASH JOIN | | 1 | 163 | 36577 (2)| 00:07:19 |
|* 5 | TABLE ACCESS BY INDEX ROWID | ASSET | 1 | 44 | 4 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | 9834 (2)| 00:01:59 |
| 7 | NESTED LOOPS | | 1 | 87 | 9830 (2)| 00:01:58 |
| 8 | NESTED LOOPS | | 1 | 74 | 9825 (2)| 00:01:58 |
|* 9 | HASH JOIN | | 1 | 52 | 9820 (2)| 00:01:58 |
|* 10 | TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER | 1 | 14 | 1 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 33 | 116 (2)| 00:00:02 |
|* 12 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 1 | 19 | 115 (2)| 00:00:02 |
|* 13 | INDEX RANGE SCAN | SYS_C00116570 | 1 | | 1 (0)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 723K| 13M| 9699 (2)| 00:01:57 |
|* 15 | TABLE ACCESS BY INDEX ROWID | NMI | 1 | 22 | 5 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | 2 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET | 1 | 13 | 5 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | IDX_SLA_SDP_SK | 2 | | 2 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | IDX_A_SAPINTLOGDEV_SK | 2 | | 2 (0)| 00:00:01 |
|* 20 | TABLE ACCESS FULL | REGISTER | 76113 | 2378K| 26743 (2)| 00:05:21 |
|* 21 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
| 22 | VIEW | | 90889 | 443K| 47021 (2)| 00:09:25 |
|* 23 | HASH JOIN | | 90889 | 2307K| 47021 (2)| 00:09:25 |
|* 24 | TABLE ACCESS FULL | REGISTER | 76113 | 966K| 26743 (2)| 00:05:21 |
|* 25 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
Predicate Information (identified by operation id):
2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
"SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
4 - access("ASSET_CD"="EQUIP_CD")
5 - filter("ROW_CURRENT_IND"='Y')
9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PMHi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS NULL COMPLETED
SYSSTATS_INFO DSTART NULL 02-16-2011 15:24
SYSSTATS_INFO DSTOP NULL 02-16-2011 15:24
SYSSTATS_INFO FLAGS 1 NULL
SYSSTATS_MAIN CPUSPEEDNW 1321.20523 NULL
SYSSTATS_MAIN IOSEEKTIM 10 NULL
SYSSTATS_MAIN IOTFRSPEED 4096 NULL
SYSSTATS_MAIN SREADTIM NULL NULL
SYSSTATS_MAIN MREADTIM NULL NULL
SYSSTATS_MAIN CPUSPEED NULL NULL
SYSSTATS_MAIN MBRC NULL NULL
SYSSTATS_MAIN MAXTHR NULL NULL
SYSSTATS_MAIN SLAVETHR NULL NULL -
Multiple Executions Plans for the same SQL statement
Dear experts,
awrsqrpt.sql is showing multiple executions plans for a single SQL statement. How is it possible that one SQL statement will have multiple Executions Plans within the same AWR report.
Below is the awrsqrpt's output for your reference.
WORKLOAD REPOSITORY SQL Report
Snapshot Period Summary
DB Name DB Id Instance Inst Num Release RAC Host
TESTDB 2157605839 TESTDB1 1 10.2.0.3.0 YES testhost1
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 32541 11-Oct-08 21:00:13 248 141.1
End Snap: 32542 11-Oct-08 21:15:06 245 143.4
Elapsed: 14.88 (mins)
DB Time: 12.18 (mins)
SQL Summary DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
Elapsed
SQL Id Time (ms)
51szt7b736bmg 25,131
Module: SQL*Plus
UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(ACCT_DR_BAL,
0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND TEST_ACC_NB = ACCT_ACC_NB(+)) WHERE
TEST_BATCH_DT = (:B1 )
SQL ID: 51szt7b736bmg DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> 1st Capture and Last Capture Snap IDs
refer to Snapshot IDs witin the snapshot range
-> UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(AC...
Plan Hash Total Elapsed 1st Capture Last Capture
# Value Time(ms) Executions Snap ID Snap ID
1 2960830398 25,131 1 32542 32542
2 3834848140 0 0 32542 32542
Plan 1(PHV: 2960830398)
Plan Statistics DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
into the Total Database Time multiplied by 100
Stat Name Statement Per Execution % Snap
Elapsed Time (ms) 25,131 25,130.7 3.4
CPU Time (ms) 23,270 23,270.2 3.9
Executions 1 N/A N/A
Buffer Gets 2,626,166 2,626,166.0 14.6
Disk Reads 305 305.0 0.3
Parse Calls 1 1.0 0.0
Rows 371,735 371,735.0 N/A
User I/O Wait Time (ms) 564 N/A N/A
Cluster Wait Time (ms) 0 N/A N/A
Application Wait Time (ms) 0 N/A N/A
Concurrency Wait Time (ms) 0 N/A N/A
Invalidations 0 N/A N/A
Version Count 2 N/A N/A
Sharable Mem(KB) 26 N/A N/A
Execution Plan
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | UPDATE STATEMENT | | | | 1110 (100)| |
| 1 | UPDATE | TEST | | | | |
| 2 | TABLE ACCESS FULL | TEST | 116K| 2740K| 1110 (2)| 00:00:14 |
| 3 | TABLE ACCESS BY INDEX ROWID| ACCT | 1 | 26 | 5 (0)| 00:00:01 |
| 4 | INDEX RANGE SCAN | ACCT_DT_ACC_IDX | 1 | | 4 (0)| 00:00:01 |
Plan 2(PHV: 3834848140)
Plan Statistics DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
into the Total Database Time multiplied by 100
Stat Name Statement Per Execution % Snap
Elapsed Time (ms) 0 N/A 0.0
CPU Time (ms) 0 N/A 0.0
Executions 0 N/A N/A
Buffer Gets 0 N/A 0.0
Disk Reads 0 N/A 0.0
Parse Calls 0 N/A 0.0
Rows 0 N/A N/A
User I/O Wait Time (ms) 0 N/A N/A
Cluster Wait Time (ms) 0 N/A N/A
Application Wait Time (ms) 0 N/A N/A
Concurrency Wait Time (ms) 0 N/A N/A
Invalidations 0 N/A N/A
Version Count 2 N/A N/A
Sharable Mem(KB) 26 N/A N/A
Execution Plan
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | UPDATE STATEMENT | | | | 2 (100)| |
| 1 | UPDATE | TEST | | | | |
| 2 | TABLE ACCESS BY INDEX ROWID| TEST | 1 | 28 | 2 (0)| 00:00:01 |
| 3 | INDEX RANGE SCAN | TEST_DT_IND | 1 | | 1 (0)| 00:00:01 |
| 4 | TABLE ACCESS BY INDEX ROWID| ACCT | 1 | 26 | 4 (0)| 00:00:01 |
| 5 | INDEX RANGE SCAN | INDX_ACCT_DT | 1 | | 3 (0)| 00:00:01 |
Full SQL Text
SQL ID SQL Text
51szt7b736bm UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL, 0) +
NVL(ACCT_DR_BAL, 0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND PB
RN_ACC_NB = ACCT_ACC_NB(+)) WHERE TEST_BATCH_DT = (:B1 )Your input is highly appreciated.
Thanks for taking your time in answering my question.
RegardsOracle Lover3 wrote:
Dear experts,
awrsqrpt.sql is showing multiple executions plans for a single SQL statement. How is it possible that one SQL statement will have multiple Executions Plans within the same AWR report.If you're using bind variables and you've histograms on your columns which can be created by default in 10g due to the "SIZE AUTO" default "method_opt" parameter of DBMS_STATS.GATHER__STATS it is quite normal that you get different execution plans for the same SQL statement. Depending on the values passed when the statement is hard parsed (this feature is called "bind variable peeking" and enabled by default since 9i) an execution plan is determined and re-used for all further executions of the same "shared" SQL statement.
If now your statement ages out of the shared pool or is invalidated due to some DDL or statistics gathering activity it will be re-parsed and again the values passed in that particular moment will determine the execution plan. If you have skewed data distribution and a histogram in place that reflects that skewness you might get different execution plans depending on the actual values used.
Since this "flip-flop" behaviour can sometimes be counter-productive if you're unlucky and the values used to hard parse the statement leading to a plan that is unsuitable for the majority of values used afterwards, 11g introduced the "adaptive" cursor sharing that attempts to detect such a situation and can automatically re-evaluate the execution plan of the statement.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/ -
Problem with MR90 transaction: printing invoice for the vendor
Hi Friends:
I've got a ticket & I need your help to resolve it.
When the user is paying the invoice, she then goes to MR90 to print the invoice to sent it to the vendor and there is no amount showing.
An invoice is paid via MRDC ( automtic invoicing). TCode MIR4 - 5105616046 to see vendor invoice in reference to a Purchase - planned freight costs. If you click on follow0on Documents you will see the posting in FI. So in MR90 - processing mode 2 - Repeat processing, the amount of this invoice should be pick up and it is not.....
Why it is not pick up? There must be a rule somewhere. ..
In the program of MR90 - transport cost - I want to know where the amount is pick up and is there a condition for it to be display ( date, hour, etc. in regards to something else).
Can anyone help me on this....................What kind of settings should be done to get this picked...
Friends..plz help me on urgent basis....
Suitable points will be rewarded....
Regards:
GauravDear
Provide the exemption dates for the vendor, whenever you need to post the TDS delete the dates and post the Invoice with TDS.
Regards,
Dharma Rao. -
Preference status not changed for the processed products
Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
RahulHello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel. -
What is the best protection plan for the 5s?
I have VZW, we just upgraded our phones and got a 5s and 5c at Best Buy. I was just curious to see what protection plan you guys recommend? I have 3 choices. We purchased the phones on 12/27/13 so I don't know how much more time we have before the deadline for a plan kicks in. I have 5 choices though.
The Best Buy protection plan, Verizon Wireless TEC plan or AppleCare+, SquareTrade & Protect Your Bubble. What do you think is best?
I currently have the TEC plan from VZW. I had a HTC Rezound and the TEC plan was on that line for $8 I believe. Once I upgraded to the iPhone through BB, my plan changed to the TEC plan for the iPhone which is now $9.99 if I remember correctly. Anyways, I can cancel it anytime. My wife's phone doesn't have the TEC, that it why were trying to figure out what PP to get for our phones. I've never lost a phone before. My HTC Rezound did break a few times. A few times it was the hardware just not working and I got a refurb sent for free. But I did break the screen 1 time and was happy that I had insurance, I only had to pay $75 versus $200 something. I only broke it once in the 2 1/2 years I had it, but it did happen. God forbid I break the iPhone screen or something, I don't have $800 for a new one.
We currently have AC+ for our iPad Air but it was a spur of the moment buy since I was in the Apple Store.
Thanks everyoneI know the "basics" of AC, I just didn't know if any of the other insurances come close? I have a few other questions if you don't mind, don't know if you can answer them or not...
- What are Apples claim guidelines, does the phone have to be non repairable to use a claim? What if the screen is just cracked or there is a giant dent on the side, heavy cosmetic damage? Does AC cover water damage? How does that all work?
- I read over at the macrumors forum that Apple can replace your iPhone without using AC? Here is the quote:
"It's worth noting that even without AC, Apple will replace your phone for $250 if you broke it and it is in no more than two pieces." Is there any truth to that statement?
- Say I break my phone, I pay the $79 deductible, I understand that part but do I have to pay for the replacemt and if so how much? I saw that some insurances require you pay, an example, $50 deductible plus $120 for the replacement.
I know the major downside against AC is that it doesn't cover lost or stolen devices and only a total of 2 claims allowed. I've never lost any of my Android phones but I've heard iPhones are pretty high up on the theft list.
If I did happen to break my iPhone 5s or crack the screen, whatever it may be, I just want to get the fastest service possible and cheap too. I don't want to have wait 3 days or more to get a replacement and I also don't want to pay a huge amontunt of money to get a replacemt either. I have AC on my iPad Air, I bought it because I was in the store and I jumped the gun before checking out other options. Anyways, I'm about to pull the trigger and get AC for my 5s and 5c, it's just that SquareTrade has caught my attention too and I'm torn between them. I saw that ST offer 4 claims and honors lost and stole devices. I didn't think this would be suck a tough decision lol.
Again, thanks for your input and help, much appreciated -
Planning for externally procured products
Hi!
Most of our products are planning strategy 52 (Planning without final assembly). We are considering changing some of our products to be externally procured, however the business wants the planning logic to stay the same - do not order unless there is a sales order.
Any ideas ???
THANKS !!
DianneStrategy 20 in my manufactuing plant - no luck because planning strategy 20 is standard MTO.
"The planned orders for the finished products are correctly "non-convetable" if the original warehouse does not have a sales order. " What about tried some strategy like 72? I'm not sure can 72 work for FG but i'm very 72 can work for SFG because i used before. Else you need to check how's the strategy 72 & customize it one by yourself.
"However, they also do not want to order the raw material UNTIL there is a Production Order, not a Planned Order."
This is very easy , you not create the planned order for the purchasing department , until they firm the production order only the purchasing department buy the raw material , but you do need consider the lead time for raw material delivery.
Unless there's huge safty stock to cover.
Hope can close your issue.
Thank you. -
Unable to process downpayment request (F-47) for the vendor with the PO
Hi All,
We are not able to process the advance payment request for the vendor 450004398 with the PO 3000086605 due to below mentioned error
" You cannot use this transaction type to post this asset.u201D After getting error we double click that error we got these full information.
The traanction type entered type entered belongs to transaction type group 15, According to the specifications for this transactipn type group,posting with trasnction types belonging to this group are only allowed in specifi asset classes ( for asset classes for asset under construction)
The asset to which you are posting belongs to class group
Above error we are facing, we checked "OAYB" also that asset class in maintained in that transaction code.
Awaiting for your reply
Thanks
Ram
09769004602Hi Ram,
Please check AO90 and OAYB
In AO90 you should assign one Asset GL Account.
for this: go to AO90 select you chart of accounts and double click on acocunt Determination select your asset determination against which asset you are paying down payment and double click on Balance sheet accounts there you need to assign under acquisition account assginment * Acquisition:Down Payment* and Down Payment clearing Account. This is only for AUC.
In OAYB select 15 Down payment and double click on specification of asset class there you need assign your asset class.
Hope this will help you.
Regards,
Schilukuri -
How to obtain the license for the mentioned products.
Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
SivaThanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva. -
Withholding Tax Report for the Vendor
Hi Friends,
I want to use the report S_PL0_09000447 - Withholding Tax Report for the Vendor, in the selection paramaters the field "Country Variant" is mandatory but in this list i cannot find the relevent country code here.
Could any one please let me know where to maintain this?
Regards,Dear Sapref,
the documentation for that report says:
To use the report for additional countries, select an appropriate
variant as reference; hide the country-specific heading by selecting the
field Country not in heading and entering the required country in the
field Additional heading.
Please be kindly informed that You can use an existing country variant which may match the closest to
your requirement.
Aas far as I know there is no country validation between the company code's country and
the country variant.
Please be kindly informed that You can use the generic report: RFIDYYWT.
I hope this can help You.
Mauri -
Is it necessary to create a Billing Plan for the Service Contracts
Hi All,
Is it necessary to create a billing plan for the service contracts.
My requirement.
In CRM 7.0, we created a service contract. For the item in that service contract there is a Billing Plan tab.
In that tab we have the dates for Period, Billing Date etc.
Now our requirement is to get the Billing Date quarterly. For this we created date rules and date profiles and assigned these date profiles to header and item level transactions.
And we are able to see the date rules under the drop down of the billing date.
I copied the standard date rule BILL004 to ZBILL004.
But when we changed to our date rule it is not changing to quarterly date.
Can you please let me know what are the configurations to be done for this.
Is the billing plan has to be created for this kind of scenario.
Thanks in advance
Thanks and Regards,
RaghuHi
On OK button's action you can Destroy the window and navigate to Page1.
Go through this link for more details and a step by step guide for creation of pop ups and dialog boxes
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903fed0d-7be4-2a10-cd96-9136707374e1?quicklink=index&overridelayout=true
Hope it works
Regards
Suresh -
I've just started using Garageband to write my own music but as I'm more used to pro studios I'm finding it a little limiting, and consequently looking to upgrade to Logic.
This will probably mean buying a new machine. So, can anyone give me some bits of advice?
- What is the minimum size of Mac I should be looking at?
- Will any off-the-shelf mac be able to cope with running Logic and recording, or do I need to get anything customised?
- Should I use one machine exclusively for music?
- I will be recording anything from vocals to guitars, so what sort of interface should I be looking at?
- Is it as simple to write songs in Logic, or does it make sense to use GB as a "scratch pad" for building basics and then transfer to Logic to "take it to the next level"? Or am I just over complicating things?
- Should I really be doing this? Help...1. You've got to be more specific
2. Yes, but a RAM upgrade is customary. 1GB should be considered an absolute minimum. A Hard drive for audio is also good if you use many tracks or samples,
3. That depends on what else you do. I don't do it. It is a good idea if you need it to work under high stress sutuation every day...otherwise you could start with 1 and see how things go.
4. Vocals to guitars...well if that's all you need...then an interface with 1 in and 2 outs would be the absolute minimum....realistically you should plan for the future. Get a sytem which has more I/O than you think you'll need and is expandable...someday you may need to record a drumkit and may have to start all over if you chose poorly. For I/O... I would consider more than you think you'll need. If you think you may need 2 ins max... consider 4 ins 4 outs...this is very small number of I/Os today. But if you know your needs ahead of time getter better converters instead of more is a very good idea (espescially if the system can expand well).
5. They share amny things... I find GB cumbersome to edit, whereas somebody else finds it's lack of features perfect for no distraction. I think eventually you'd just start using Logic full time. There are things GB won't touch.
6. <shrugs>
J -
i'm on a prepaid plan for the 4s, i want the hotspot option which isn't offered on the prepaid plan. heard the connection is too slow on the 4s only worth it on the 5 or 5s. would you agree? not sure how much the hotspot would increase my monthly bill....
To use the hotspot for any of those devices, I believe you have to switch to a postpaid account and plan. You can see the pricing for the available postpaid plans under the "Shop" area of the website.
-
Hi;
I have a problem in GRC-PC I can't solve. My User is generating a 'Dashboard' report on the status of planned for the 1st quarter of 2014 (compliance controls), this controls not planned, but presented the control with status Submitted.
I appreciate any help...
Thanks all....
Regards....kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus
Maybe you are looking for
-
Can i drag files from one computer to another
can i drag files from one computer to another
-
How can my application icons draw slowly?
I'm trying to trouble shoot how it's possible that my new MP 5,1 is slow to draw simple application icons when first opening the Applications folder, I see generic icons until they resolve to the actual ones. My previous MP1,1 with dual 8-Core upgrad
-
Do i need to be a technology expert in order to secure it?
Hello Everyone, I received an offer from one of the top oil & gas employers in the gulf region. I will be responsible for server & desktop systems hardening, network security hardnening, and other IT security related tasks. One of the critical server
-
I have communicated with apple care every time and they keep telling me there is no problem,so why does it keep crashing. I took it in for repair under warrenty and they told me there was nothing wrong with it yet it crashed again two weeks later and
-
RoboHelp project with variables crashes
Hi, I have 2 projects that had no problems until I added variables. Now they crash about 90% of the time while generating the .chm file, and always during the "updating" stage. (Eventually, I do manage...) I am using RoboHelp 7, and not on a server.