Quotation supplementary condition types

Hi All,
How can i get the Quotation Supllementary condition types and its values?
As we can get KNUMV - condition record no. for PO in EEKO table, there is no KNUMV record for quotation.
Any idea, how can i get these pricing condition types and values in it.
Thanks..

Hi,
Quotations in general have the standard settings of time-dependent conditions where as the PO has time-independent conditions.                                                                               
Please note that if you use the time-dependent conditions then the field EKKO-KNUMV is not filled .  Only with time-independent conditions it is filled.                            
Regards,
Mauro

Similar Messages

  • Condition type: UTXJ is not getting re-determined in Quotation/ Sales Order

    Dear All,
    I had created one Quotation with
    Customer-Tax Classification as 1 - Taxable, and
    Material _ Tax Classification as 0 - Tax Exempt
    Condition Records (T.Code: VK11) wasn't maintained.
    Later on, I got informed that Material is also taxable. So, I changed the Material - Tax Classification to 2 - Service Tax.
    Then, I maintained Condition Records (in VK11).
    Now, still taxes are not getting calculated in Quotation.
    When i tried to check Condition Type: JSER - Service Tax; Its still showing A0 - 0% Output Tax in Field: Tax Code instead of AA - O/P (interim) 12.36%
    Also, when i tried to Upadte - Pricing Type: Copy Pricing Elements unchanged and redetermine Taxes in Tab: Conditions; System give following Log:
    Maintain the chapter ID for material LSGENOTHERS J_1IMTCHID
    Please, assist.
    Note: When i tried to create new quotation with same Parameters (Customer & Material for the same Sales Area) taxes are getting calculated.

    Hi Pramod,
    Check following things.
    Check teh pricing date of the Earlier Quotation.
    And now check the Condition reocrds validity date which u created later.
    Ur condition record must be valid on the pricing date, thenonly it will be picked up by the system.
    After u adjust the validity of the condition record, click update pricing.
    also check the material tax clasification in Sales Item level under Billign Document tab, it should be 2, if it is not then change it accordingly and regenerate the pricing.
    Hope this will resolve your issue.
    for anything further pls revert.

  • Conditions Types during creation of Quotation

    Dear All ,
              I want to know from where the condition types are fetched during creation of quotation in ME47 . These condition types are not fetched from vendor schema thats for sure . I want to know which pricing procedure is responsible for quotation creation .
              My requirement is I have to create a quotation comparision sheet for my vendor and I want to know from which table I should take the values of condition types to achieve my target .
    Regards
    Abhijit Das

    Hi Sachin ,
    I am trying to create a Quotation in ME47 .The condition types I can find init to maintain are
    P000 : Gross Price
    R000 : Discount On gross
    R001 : Discount Of quantity
    R002 : Absolute Discount
    R003 : Discount % on net
    But my client requires more condition types like Packing & Forwarding ,Excise , CESS , VAT /CST , FREIGHT .
    I want to know how I will enter these condition types in Quotation . After maintaining these entries only I want to compare the quotations through ME49 .
    But system is not allowing me to enter these conditions
    HI Sachin
    I am Kalyan,
    To Maintain these conditions in Quotation, use Transaction ME47, Go to Maintain Quotation Overview Screen
    Now select the Line item for which u like to add the conditions as u mentioned, choose the Item conditons Icons (Shift + F6),
    Now, Select / Choose the Validity period will proceed to another screen, where we can edit the changes.
    Here u can add additional Price like freight, discount etc. here. And SAVE it.
    Thanks and Regards
    Kalyan,

  • Tax Conditions types not appearing in CRM orders and quotations

    Hello All,
    I have created a new tax condition type in ECC and through initial load replicate the same to CRM. pricing procedure repliction with new tax condition is also successful.
    But, the new tax condition is not appearing in condition tab at item level when i create quotation in CRM. other condition types are coming. data for this condition type is there in custom condition table. mapping of tax classifiction to tax group is also done in SPRO.
    Please advise.
    THank and Regards
    Sudhir Grover

    Hello Sudhir,
    You should check the trace log for pricing at first. Set the user parameter:PRC_TRACE as 'X' on T-cd:SU01 for your user and check the Access analysis on the condition tab.
    Regards,
    Masayuki

  • Condition Type Amount field is disappearing in Quotation when scroll down & scroll up is done

    Hi Friends,
    I am getting a strange issue in the Quotation.
    When i change the Contract Validity Period value in the Header section, a custom discount condition type will appear in the Conditions Tab. But the issue comes when i scroll down and scroll up the screen in Condition tab the amount value is disappearing. I debugged almost the whole functionality but still not able to get where the issue is happening.
    Any help on this regard is highly appreciated:)
    Please find the attached document for the reference.
    Regards,
    Santosh

    Hi Virginia,
    The description of the issue seems to indicate that the BOM is reset in ECC.   Can you have a look at note 380911 and consider the suggested settings?
    X: No structure is exploded in the R/3 system.
    Subitems are externally
    assigned via the BAPI interface. In particular, no free goods determination and
    no material substitution is executed in the R/3 back end either in this
    case.  .../...
    Best regards - Christophe

  • Error with VPRS condition type in Quotation

    Hi,
    When go through the pricing conditions of my quotations, I see a red signal indicating error before the VPRS Condition type (Condition category G). When i do the condiotn analysis, the diagnosis read as below.
    "Error in quantity / value updation"
    Diagnosis:
    This condition has not been determined using condition records. The amount or value should be determined from another data source. For cost (condition category 'G') it is read using conditions from the material valuation segment, for a cash discount condition it is read using conditions from the terms of payment table.
    In this transaction an error occurs - the material valuation segment or the terms of payment table could not be read or a currency translation has failed.
    System Response
    The condition has been provided with the deactivated indicator 'X'.
    Could you please let me know what could be causing this?
    regards,
    Ashok

    Hi Ashok,
    Your problem seems intresting, may be this thread can help you
    [SCN|VPRS- Error in quantity/value determination]
    Please provide feedback after getting it solved.
    Thanks,
    Raja

  • EK02 condition type on quotation

    We currently see and utlize the EK02 condition type on sales orders for configured parts (assembly order creates).
    However, when creating a sales quotation (VA21), the EK02 condition is not active/not populated.
    Is there a way to get the EK02 condition to calculate on a quotation?  Like maybe some way to attach a simulation production order to it that doesn't really create demand in the system?  Would I need a new production order type for this?
    Gina Feldner

    Hi Gina,
                 First check whats the requirment type for quotation in your system. You can check this by clicking on shipping tab in the overview screen. Then go to the Transaction" OVZH" and see whats the requirment calls associated with it. Once you identify the requirment class, check If you have the entry "EK01" at the condition type line items field in the requirment class. Transaction code for this is "OVZG". If it is not there maintain that. Then go to the conditions screen and see whats the pricing procedure. In V/08 , Check if the condition type "EK02" is maintained there. If it is not ,Maintain the condition type in the procedure .This would resolve the problem. Other wise you can maintain the "EK02" in the sales document cofinguration (VOV8) at condition type lie items and maintain the same in the pricing procedure. Only difference is If you maintain this condition in the sales document type this is valid for all the items in the sales order and If you maintain this in the requirment class, this is valid for only the documents which have this requirmanet type. Kindly please let me know If you need any more help on this.
    Regards.
    Ram Pedarla

  • Hide values for certain condition types in Quotation Saleorder and Invoice

    Hi All,
    I have written code to hide values for certain condition types in LV69AFZZ,
    this works fine in the ITEM LEVEL.
    But for the same condition types, I could not hide the values in the HEADER LEVEL.
    Unless I hide it at header level also, this is useless.
    Please guide me how to do it.
    Thanks & Regards
    Pradeep

    Hi,
    We have been using FORM USEREXIT_FIELD_MODIFICATION of LV69AFZz for item level & FORM USEREXIT_FIELD_MODIFIC_KOPF of LV69AFZZ for hiding heade level conditions.
    I hope this helps,
    Regards
    Raju chiutale.

  • Manual condition types deleted on Quotation change

    Hi Friends
    This is an urgent issue.
    Please let me know the scenerios when can manual condition types get deleted when ever  call BAPI_CUSTOMER_QUOTATION_CHANGE
    Thanks in Advance
    Cheers
    LK

    Hi !!!!!!!!
    Can any one reply to this query

  • Standard Report with Condition Type and Condition Records

    Hello to all,
    Is there any standard report available in which Condition Type and Condition values are displayed in either column or row format? The selection criteria can be either Quotation, Contract, Sales Order, Delivery, Invoice or Billing. Thanks anyways...

    Hi Huzefa,
      Pls check the relevant table where the condition records are stored. then do a query with  that condition table and KONP. say for eg: condn type ZINV,ZMRP gets stored in condition table A821, then combine A821 and KONP, u can input condition type and get the values........................
    go to vk13, display and click on layout, u will able to see the condition table.
    Rgds,
    Anitha J

  • Condition Types appearing two times in a Purchase Order

    Hi,
    The condition types are same in supplementary schema (for Info Record) and Purchase Order Calculation Schema. When I put some value against a condition type under conditions in Info Record then that condition type appears 2 times in the purchase order. It seems the condition type appears 1st time (with value from Info Record) because it is picked from Info Record and 2nd time (with no value) from the Purchase Order Calculation Schema.
    The requirement is condition type should appear only single time in PO (by default) with or without value in spite of having info record. In case some value is maintained in Info Record then the condition type should appear with value but in a single line in PO which can be edited if required. There should not be second line of same condition type by default in PO.
    Can anyone provide some idea to resolve this?
    Thanks in advance

    There is only 1 condition line (apart from PB00), which comes 2 times in PO by default, in MEK2 and also one condition line (one line was deleted and then saved) in last PO (from the Info Record). But the condition type still comes 2 times while creating a new PO.
    Please provide some more answer to resolve this issue.
    Thanks in advance

  • Condition Types in Scheduling Agreement(Urgent)

    Dear Experts.
    This is a query with reference to my earlier issue Changes in Condition ME32L.As per suggestions, to get validity periods i have clicked on Time dependent Condition In SPRO settings Under Define document Types.
    After that i am not able to enter Custom Conditions while creating a Scheduling Agreement.So i tried by removing this Time dependent setting,then was able to enter Custom Conditions...
    But i need to see validity periods too when i change condition types through ME32L...
    So,Please give me appropriate Suggestion....
    Thanks and Regards
    MK

    I'm not sure about your own pric proc, but in standard it should works, and also its apply per organization level.
    RM0000 and RM1000                                                      
        Control the price determination process in POs, quotations, and    
        scheduling agreements.                                             
        Both calculation schemas require 2 condition types for the gross   
        price: one for automatic price determination (standard: PB00) and  
        one for manual maintenance (standard: PBXX).                                                                               
    RM0001 and RM1001                                                      
        Determine which condition types you can enter in purchasing document
        headers with time-dependent conditions (e.g. contracts).

  • Restrict referance of pricing and condition type from latest PO.

    Hi Experts,
    I am creating Purchase order and at the time of creation of purchase order system is copying prices and condition types from latest PO.
    Which is not desirable to our business process, when I dig out I found out that in standard SAP system
    The system looks at pricing in the hierarchy order as below:
    u2022     Contracts/scheduling agreement
    u2022     Condition records
    u2022     Info Records
    u2022     Last purchase document
    So can some one help me with information how to restrict system to follow this referance of pricing.
    I want to enter price as well as condition type manualy every time user create a purchasing document.
    Also i want to know can it be restricted specificaly for few document type.
    Thanks
    Best Regards
    Ritesh

    Hi sir
    can we try this
    Use the user parameter EVO to indicate that no price adoption from last Purchase Order must take place:
    IMG: MM -> Purchasing -> Environment data -> Default values for Buyers
    -> Setting for Default values.
    Select or setup a default value and on the "price adoption" tab you may choose how copying of conditions from last purchase order must behave. Select "Do not copy".
    Then assign this default value to the user, using the EVO parameter.
    [http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/price-to-flow-from-info-record-at-plant-level-813066]
    [Re: new info record with same details as archive one.;
    check following notes it may helfull
    569885 About Info Record Update indicator (EKPO-SPINF)
    13127 Update in info record from PO, quotation, contract
    430543 FAQ: Purchasing info record
    675523
    456691
    Regards
    Kailas ugale

  • Condition type not picked in Inquiry but picked up in order

    Hi Guys,
    We have a problem where a pricing condition type is picked up in order but it is not picked up in quotation/inquiry. So we have the price difference for the material. Points will be awarded.
    Can you guys please help?
    Thanks
    Venky

    Hi venky
    generally in Inquiry pricing is not at all required.
    but in quotation it may require sometimes. but when you create an order with reference to quotation , the price varies, this is because of the  pricing type .
    check the pricing type in VTAA quotation, the pricing type will be different for sales order and for quotation.
    Regards
    Srinath

  • Not possible to determine a condition type for the price in ME49

    Hi,
    While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
    Not possible to determine a condition type for the price
    Message no. 06657
    Diagnosis
    When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
    Procedure
    Contact your system administrator.
    The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
    Utsav

    Hi Utsav,
    You can refer to the following link. it might be useful to you
    RFQ price
    Thanks
    Nisha

Maybe you are looking for