Quotation valid-to date

Can we set a default in the quotation valid to date? I can find valid from date from sales document config, but not the valid to.

Hi Deriada,
You need to do a enchancement to program MV45AFZZ, User exist is USER_EXIT_MOVE_FIELD_TO_VBAK.
1. Valid from date : VBAK_ANGDT
2. Valid to date: VBAK_BNDDT
Modify the user exist as below.
VBAK_BNDDT=VBAK_ANGDT+ (No. of days)
Regards
Nagendra P Boggarapu

Similar Messages

Copying valid until date from sales quotation to sales order

Dear all,
is it possible to copy the Valid Until Date of a sales quotation to the Delivery Date of a Sales Order, when I use the "Copy To Sales Order" button of a sales quotation?
Is there a way to do this?
Can someone help me, please?
Regards
Emanuele
Edited by: Emanuele Croci on Oct 19, 2009 11:49 AM

The problem is that the FS will not fire using the Copy To button without any data changing.
(I would consider it an error, but it works that way.)
If you use the next FS, connected to the Remarks field, you can use it on the order with the Copy From button, or manually activated after a Copy To.
declare @c nvarchar(254)
declare @p int
set @c=$[$16.1]
set @p=charindex('Quotations',@c)
set @c=substring(@c,@p+10,20)
set @p=charindex('.',@c)
Select OQUT.DocDueDate
From OQUT
Where OQUT.DocNum=cast(substring(@c,1,@p-1) as int)

Validity end date is not getting copied from inquiry to quotation.

Hi Friends,
While creating quotation the validity end date is not getting copied from inquiry to quotation.
What setting needs to be done, pl suggest.
Regards,
Hari.

Sreehari,
i dont find any logic of having Same validity date for Quotation and Inquiry....
the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
Thanks,
raja

Quotation to have default valid to date

Hi Friends
I have a requirement for SD quotation to have default valid to date =Todayu2019s date+14 days
Could you please help
Thanks
Ravi

hi
You need to do a enchancement to program MV45AFZZ, User exist is USER_EXIT_MOVE_FIELD_TO_VBAK.
1. Valid from date : VBAK_ANGDT
2. Valid to date: VBAK_BNDDT
Modify the user exist as below.
VBAK_BNDDT=VBAK_ANGDT+ (14 days)

Restriction of Validity start date in Scheduling agreement

Hi,
I am not able to convert the message 06 170( Start of validity period is in the past) in error message , when i am going to define attributes of system messages in purchasing and converting this message into error , system still does not give error message when i am selecting back validity start date in the header of Scheduling agreement (me32l)
What can be the possible reason.
Regards
Sachin

Hi,
I believe the message 06-170 is hard-coded in Include "MM06EFRP_EKKO-KDATE" in the Program SAPMM06E
Laufzeitbeginn in der Vergangenheit -
    IF ekko-kdatb < sy-datlo.
      MESSAGE w170 INTO gl_dummy.
      mmpur_message 'W' '06' '170' '' '' '' ''.
Please consul your ABAP Team on this to change it to Error.
But SAP does not recommend changing standard Programs, so please discuss this and see that its really required and will not have any effects to your business process, because there may be instances wherein you might require to create scheduling agreements with a past validity date sometime in future based on business requirement.
Regards
Chandra Shekhar

"Validity of data" in WAD

I made a web report in the WAD containing a query in a table item.
What I would like to display is "Validity of data" (as date/time) which I see when I display the query on the web from BEx with the default view.
How do I display that?

Thank you very much!
I had already tried that one before but it must have flashed in front of my eyes cause I didn't see it.
Problem solved...

Help reqd on Changing the Valid from "date" for both BOM & Routing

Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

Error: No valid complaint data was found in this sales area

Hi All,
I am getting below error while delta or request download of customer.
No valid complaint data was found in this sales area
Message no. CRM_SPL_BUPA_FRG0010203
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Message no. SMW3018
Error case:
ECC-->Customer(Sold to) extended to a sales area and saved.
     CRM-->Business partner gets updated in the CRM properly.
ECC--> Deletion flag for same customer and same sales area is set. (Deletion flag - "Selected sales area").
     CRM-->Business partner gets updated in the CRM properly and is not shown as extended to the sales area via BP t code.
ECC-->Deletion flag is removed for the customer.
     CRM--> BDOC fails to update the Partner and goes in error.
Problem comes when deletion flag is removed in ECC.
Any help would be highly appreciated.
Thanks in advance.
-Ram

Hi Ram,
Hope you have not make any field mandatory in the Complaint tab in the sales area section in the BP.
When you are removing the deletion flag please check if any entry is mandatory in the Complaint tab.
Hope this will be useful
Thanks and Regards
DJ

Table to find BOM valid-till-date

Hi Friends,
I have to check the vality of BOM components, through transaction CS03 i could able to see the Valid-till-date and i need to check the same in my code.
Looked into following tables, thre is a field valid-from-date(DATUV) but i'm not getting field Valied-to-date(DATUB).
MAST Material to BOM Link
EQST Equipment to BOM Link
STAS BOMs header
STKO BOM header
STPN BOM follow-Up control
STPO BOM item
STPU BOM sub-item
STST Standard BOM link
STVB Bills of material - Serialisation of posting
STZU Permanent BOM data
Can any one please help me.
Thanks in advance.
/Kiran

Hi kiran,
I think the Valid-to-date is in table AEEF-DATE_HI which can be linked with the BOM Header table STKO by field AENNR. Try this.
Otherwise you can also get the Date using the FM CS_BOM_EXPLOSION....
Use it as follows;
CALL FUNCTION 'CS_BOM_EXPLOSION'
EXPORTING
AUMNG = 0
CAPID = ' '
DATUV = DATVAL "valid-from date
EHNDL = '1'
MKTLS = 'X'
MEHRS = 'X'
MMORY = '1'
MTNRV = MATNR
STLAL = LAL "like mast-stlal default '1'
STLAN = LAN "like mast-stlan default '2'
SVWVO = 'X'
VRSVO = 'X'
WERKS = WERKS
mmaps = 'X'
IMPORTING
TOPMAT = STARTMAT "includes structure CSTMAT
TABLES
STBD = TBD "includes structure CSXDOC
STBE = TBE "includes structure CSXEQUI
STBK = TBK "includes structure CSXKLA
STBM = TBM "includes structure CSXMAT
STBP = TBP "includes structure CSXGEN
STBT = TBT "includes structure CSXTDL
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MISSING_AUTHORIZATION = 3
NO_BOM_FOUND = 4
NO_PLANT_DATA = 5
NO_SUITABLE_BOM_FOUND = 6
OBJECT_NOT_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9.
After the function call you will get the Valid to Date(DATEUB) from table STBP.
Hope this Helps you...
Regards
Karthik D

Table for Valid to date in BOM item

Hi Exeprts,
Can any one help me on this in which db table Valid to date:DATUB is Updates with reference to Change Number.
Best Regards,
Venkata Siva.
Edited by: venkata siva reddy on Apr 27, 2011 9:28 PM

Hi
The Valid-to date will always be set to 31.12.9999. Instead you can get the valid-to date using the below logic.
-> Get all the BOM from T415A table for the material number into T_T415A
-->LOOP AT t_t415a.
    ON CHANGE OF t_t415a-matnr OR t_t415a-werks OR t_t415a-stlal.
      IF sy-tabix NE 1.
        MOVE : v_matnr TO t_dates-matnr,
               v_werks TO t_dates-werks,
               v_stlan TO t_dates-stlan,
               v_datuv TO t_dates-datuv,
               v_stlal TO t_dates-stlal.
        IF v_matnr NE t_t415a-matnr.
          t_dates-datub = c_99991231.
        ELSE.
          t_dates-datub = t_t415a-datuv - 1.
        ENDIF.
        APPEND t_dates.
        CLEAR :
        v_matnr,
        v_werks,
        v_stlan,
        v_datuv,
        v_stlal.
      ENDIF.
    ENDON.
    v_matnr = t_t415a-matnr.
    v_werks = t_t415a-werks.
    v_stlan = t_t415a-stlan.
    v_datuv = t_t415a-datuv.
    v_stlal = t_t415a-stlal.
ENDLOOP.
Regards
Dhurga

Table for Valid To date field in C203 Tcode

Let me know the table name for "Valid To Date" field in C203 transaction.
Thanks,
Angavai.E

Hi Angavai,
Check with table PLMW.
Regards,
Raghu

Source List Validity Start Date

I have noticed that, if the source list validity start date and contract validity start date are same then, the contract price is not considered while creating PO and receive error message as "Source not included in list despite source list requirement"
If I change the validity start date of source list to one day before the validity start date of Contract then system is picking the contract price in PO and able to save PO successfully.
Is there any way to create PO even if the validity start date of source list and contract are same?

from OSS Note 44368 - ME51 ME57 Contract as source of supply
A contract that is valid on the delivery date but not on the current date is not taken into account in the source determination process.
Cause and prerequisites
This is programmed this way.
Solution
For reasons of upward compatibility, check will continue to be carried out on basis of current date.
However, if you wish the check to be against delivery date, you can implement the modification described under the advance corrections.
If Note 116464 is implemented in a 4.0B Release, use the advance correction from Release 4.5A, however, in Release 4.0B the program name is LMEQRF01.

Validity end date tab is suppressed in scheduling agreement

Hi ,
In scheduling agreement , Validity end date tab is suppressed ,
There is no layout is assigned to the doc type & standart transaction varient is acitve , but while doing ME31L above field is not coming ( it is in suppressed / hide mode )
Please let me how to get that validity date tab in scheduling agreement.
Thanks,
Pradeep

Hi,
Go to SPRO > IMG > MM > Purchasing > Purchase Order > Define Screen Layout > NBF > Administrative data, header > make the fiels Validity Period field optional / Required.
Hope this will help you.
Regards,
Manish Jain

Restriction of Validity start date in Info record ME11/12

Hi,
Can anybody suggest how can we put a check in validity start date of conditions so that back date is not selected while putting the price/conditions in info record.
Regards
sachin

hi..
When u create info-record for any comabination of material and vendor..u go to condition tab ..where ehile defining condition type and their details u can specify their validity....
and after saving this..if u again want to see that condtion type then it prompt u for "choose validity" for which u want to see the condition type...
Hope it works,,
Thanks..

Updating Cube in the End Routine based on the incoming Valid From Date

Hello Experts
Here is my scenario.
We are using BW 7.x. There is DSO and from DSO it goes to the Cube, the promotions information. These data targets will have Material (Article), Plant (Site), Promotions Number, Valid from and Valid to dates. The Valid To date will come in as 12/31/9999 all the time.
If I receive a new record from ECC with same Material, Plat and Promotion combination again, I need to get the Valid From Date from the new record and Update the existing record' Valid To date in DSO/Cube as Valid From of the new record - 1.
So Valid To date of the existing record = New Record's Valid From date minus - 1.
I would like to do the update in "End Routine" of the Cube.
Would you please suggest if this can be done and if so would you please provide the sample code.
THANK YOU in Advance.
Nag.

yes, you can do this...
just use a RESULT_PACKAGE in end routine.
and using RESULT_PACKAGE fatch the existing records from DSO and append that into RESULT_PACKAGE after your desired changes,
just try to create a code using this l;ogic. if you can't then i will provide you a code.
Regards,
Ashish

Quotation valid-to date

Similar Messages

Maybe you are looking for